Satellite U200-181 - How to add extra RAM?

Hi
I've enjoyed my U200-181 very much, but would like to have some extra RAM in addition to 512 Mb installed by default. How can I do that?
How many SO-DIMM slots available? Are there any disassembly instructions?
Thanks in advance

changing the memory is very easy.
1. pull off the black strip above the keyboard (it just snaps in place)
2. remove the 2 screws
3. pivot keyboard forward being careful not to damage keyboard cable
4. remove 2 screws on big metal plate on the right.
5. remove plate to expose 2 x ddr2 200 pin sodimm slots.

Similar Messages

  • Satellite U200-181: How can I check if Trusted Platform Module is present

    How can I check Trusted Platform module is present or not?

    Hi
    The configuration of TPM (trusted platform module) is carried out in the BIOS setup program and this function is provided only with some models.
    I dont know if the U200-181 supports this or not but you can check it yourself.
    The security controller settings should be available in BIOS system Setup on the second site.
    If the unit supports the TPM you should see the switch to enable or disable this security option. Usually as per default the TPM is disabled.

  • How can I see the quantity of battery cycles on Satellite U200-181?

    I have Satellite U200-181, and I use it hard, every. I want to be ready replace my battery, when it will have 400 cycles.
    How can I see the quantity of battery cycles on my laptop?

    You must not see this. You will see that capacity of the battery drops down and will be empty after short time. Nobody say that you will be able to use battery 400 cycles only. Maybe you will be lucky and the battery will have longer life time.
    My Tecra M1 is about 4 years old and still working with original battery.
    Your question is pretty unusual and I am really interested about further comments.

  • How to reset password on Satellite U200-181?

    Greetings!
    Sorry for my English.
    I have notebook Toshiba Satellite U200-181 and all documents from it (check, warranty).
    When the computer starts, it demands to enter the BIOS password... I called in the service center in Russia, but they told me then they have not any Response Codes
    I have PC Serial No. and Challenge Code... What I need doing now? I dont want pay about 70$ for reset password... please help :)
    Best Regards, Sergey

    Hello Sergey
    Please do not be mad on me but you do not understand how it works. To reset BIOS password Toshiba control center needs code given by your notebook model. After short time they send one new code back and after entering this code the BIOS password will be deleted.
    Just authorized service provider in your country can contact Toshiba control center and just service will get the information back. With short words: private person like you have no chance to delete BIOS password. I hope you understand it why. If not let me know I will explain you.
    Sorry but you must contact service.

  • Satellite U200-181 Built-in HDD ERROR

    I've bought "Toshiba Satellite U200-181" 2 weeks ago. Recently (2-3 days ago) Ive got problem with built-in HDD.
    So the problem is that sometimes I'm getting the message "Built-in HDD ERROR" during Notebook startup. This message "Built-in HDD ERROR" appears from time to time and system stops booting from HDD, but can boot from other bootable devices. First time when message "Built-in HDD ERROR" occurred, it was accompanied by lot of strange clapper pop noise from inside of the Notebook. All other
    "Built-in HDD ERROR" messages were accompanied with not so loud and strange clapper pop noise, but still with some pop sounds (not as loud as at first time).
    To identify possible problems I saved S.M.A.R.T. data log (see appendix#1).
    Additional information: After I've purchased the Notebook Ive made successful BIOS upgrade from version 1.40 to version 1.50 strictly according Toshiba official web-site instructions. After BIOS upgrade system worked well, no ERRORS, no faults. But 3days ago I got "Built-in HDD ERROR" message.
    Any ideas? Thank you.
    Appendix: #1
    ================================================== ==========
    This report created by Active SMART
    http://www.ariolic.com/activesmart/
    ================================================== ==========
    S.M.A.R.T. status
    Date: 2007/01/18 20:05:32
    Model Name: HTS541080G9SA00
    Serial number: MPBDL0XKKE3RBG
    Capacity: 80.0 GB
    Firmware: MB4OC60R
    Drive interface: IDE
    Current temperature: 35 C (95 F)
    Attribute Name Threshold Value Worst Raw value
    1 (01) Raw Read Error Rate 62 100 100 0
    2 (02) Throughput Performance 40 100 100 0
    3 (03) Spin Up Time 33 253 253 55834574849
    4 (04) Start/Stop Count 0 100 100 363
    5 (05) Reallocated Sectors Count 5 100 100 0
    7 (07) Seek Error Rate 67 100 100 0
    8 (08) Seek Time Performance 40 100 100 0
    9 (09) Power-On Hours 0 100 100 194
    10 (0A) Spin Retry Count 60 100 100 0
    12 (0C) Device Power Cycle Count 0 100 100 256
    191 (BF) G-sense Error Rate 0 100 100 0
    192 (C0) Power-off Retract Count 0 100 100 5177348
    193 (C1) Load/Unload Cycle Count 0 100 100 4300
    194 (C2) Temperature 0 157 157 231929348131
    196 (C4) Reallocation Event Count 0 100 100 0
    197 (C5) Current Pending Sector Count 0 100 100 0
    198 (C6) Uncorrectable Sector Count 0 100 100 0
    199 (C7) UltraDMA CRC Error Count 0 200 253 0

    I recommend you to contact Toshiba service partner in your country as soon as possible. The unit is new one and something like this should not happen. Explain them the situation and you will see what they can do about it.
    You can also contact your local dealer and try to exchange the unit to new one.

  • Satellite U200-181. Slow touchpad under Linux

    I use two operating systems on my Toshiba Satellite U200-181.
    They are: MS Windows XP Home, and Debian GNU Linux Etch (stable).
    In MS Windows XP all the touchpad 's functions work fine, but there are some troubles under Linux:
    - cursor is moving very slowly when I am moving my finger over touchpad surface. Changind pointer speed acceleration in mouse preference dialog does nothing (I use Gnome 2 desktop environment).
    - tapping on the touchpad surface does not emulate left button pressing as it does in MS Windows.
    Can anybody help me to configure touchpad so that it works in Linux as it does in MS Windows.
    Thank you, Mikhail.

    Well you should use this app
    http://qsynaptics.sourceforge.net/
    Also touchpad and mouse movement can be adjusted by adjusting /etc/X11/xorg.conf file (but be carefull allways create backup).
    Try to type something like this
    Section "InputDevice"
    Identifier "Alps Touchpad"
    Driver "synaptics"
    Option "SendCoreEvents" "true"
    Option "Device" "/dev/input/event2"
    Option "Protocol" "event"
    Option "LeftEdge" "120"
    Option "RightEdge" "830"
    Option "TopEdge" "120"
    Option "BottomEdge" "650"
    Option "FingerLow" "14"
    Option "FingerHigh" "15"
    Option "MaxTapTime" "180"
    Option "MaxTapMove" "110"
    Option "ClickTime" "0"
    Option "EmulateMidButtonTime" "75"
    Option "VertScrollDelta" "10"
    Option "HorizScrollDelta" "0"
    Option "MinSpeed" "0.45"
    Option "MaxSpeed" "0.75"
    Option "AccelFactor" "0.020"
    Option "EdgeMotionMinSpeed" "200"
    Option "EdgeMotionMaxSpeed" "200"
    Option "UpDownScrolling" "1"
    Option "CircularScrolling" "0"
    Option "CircScrollDelta" "0.1"
    Option "CircScrollTrigger" "2"
    Option "SHMConfig" "true"
    EndSection

  • HT1752 I am working on a chart in paged with 7 columns. Problem has occurred with amount of row. I have completed 999 rows and it won't allow me to continue. As I need to do approx 3000+ rows, can anyone explain to me how to add extra rows. Thanks Jane

    I am working on a chart in pages with 7 columns.
    Problem has occurred with amount of rows. I have completed 999 rows and it won't allow me to continue. As I need to do approx 3000+ rows, can anyone explain to me how to add extra rows. Thanks Jane

    Try posting in the Pages forum
    https://discussions.apple.com/community/iwork/pages

  • How to add extra options for style of images.   iPad version has far more options than Mac version

    How to add extra options for style of images in pages.   iPad version has far more options than Mac version

    Thank you, you made me go look again and I realised the ones I use on the iPad are under Borders not style and they are on Mac also.  I feel a bit silly but I wouldn't have got there without your prompting.  Do you mean by "create your own"  using the borders and then saving as a style or can you create something that is not in either?
    Thanks again

  • How to add extra labels into Bridge CS5?

    Hi folks, nice to meet you all.
    I do not want to edit or rename the existing 5 existing labels into Bridge CS5. I just want to create new labels. So, I want to add extra labels to have more than 5 labels.
    Does anybody know how to add extra labels into Bridge CS5? If so, please, tell me how to do it.
    Thanks.

    You should move this post to the new Bridge forum as this one will soon die.  Here is link http://forums.adobe.com/community/bridge/general

  • How to add extra tab in bapi at item level

    hi developer,
    please guide me in solving this problem i.e how to add extra tab in bapi at item level .
    thanks .
    ravi

    What are you exactly asking for, I don't understand your question...
    Transaction screen, adding a tab / customer fields
    Business Object / BAPI, modifying BAPI signature, extension
    NB : The quality of an answer depends significantly on the quality of the question ...
    Regards,
    Raymond

  • How to add extra per day records based on maximum occurances in the week.

    Hello,
    I need to add extra records based on maximum occurances on a day in a week.
    For example, the result of the query shows that maximum occuances in a week 0 is 3 on so I need to add empty records in each day in that week.
    SQL QUERY:
    with  numbers as (
    SELECT ROWNUM N FROM dual 
      CONNECT BY LEVEL <=35
    ),months as (
    SELECT     ADD_MONTHS('01-JUN-10',n-1) AS current_month,
         TO_CHAR(ADD_MONTHS('01-JUN-10',n-1),'fmMonth-YYYY') AS current_month_label
    FROM numbers
    WHERE ADD_MONTHS('01-JUN-10',n-1) <= NVL(add_months('01-JUN-10', :monthcount-1),:p_month)
    ORDER BY n ASC
    ) , dates as (
    select     trunc(trunc(m.current_month, 'MM'), 'D') + n - 1 calendar_date,
         trunc((n - 1) / 7) AS week_num,
                    m.current_month as current_month
    from     numbers, months m
    where trunc(dom.schedule.calendar_begin(m.current_month) + n - 1, 'd') <= last_day(m.current_month)
    Order By week_num, calendar_date
    select dates.week_num, edate, name from (
    --week 0
    select '30-MAY-10' as edate, 'JJ' as name from dual union
    select  '31-MAY-10' as edate, 'MK' as name from dual union
    select  '01-JUN-10' as edate, 'MK' as name from dual union
    select  '01-JUN-10' as edate, 'BK' as name from dual union
    select  '01-JUN-10' as edate, 'JJ' as name from dual union
    select  '04-JUN-10' as edate, 'KK' as name from dual union
    select  '04-JUN-10' as edate, 'LA' as name from dual      union
    -- week 1
    select  '06-JUN-10' as edate, 'BK' as name from dual union
    select  '06-JUN-10' as edate, 'JJ' as name from dual union
    select  '07-JUN-10' as edate, 'KK' as name from dual union
    select  '11-JUN-10' as edate, 'LA' as name from dual      
    ) a  join dates on dates.calendar_date = a.edate   
    order by week_num, to_date(edate);CURRENT RESULT :
    WEEK_NUM             EDATE                NAME
    0                   30-MAY-10            JJ
    0                   31-MAY-10             MK
    0                   01-JUN-10             MK
    0                   01-JUN-10             JJ
    0                   01-JUN-10             BK
    0                   04-JUN-10             KK
    0                   04-JUN-10             LA
    1                   06-JUN-10             BK
    1                   06-JUN-10             JJ
    1                   07-JUN-10             KK
    1                   11-JUN-10             LAREQUIRED RESULT:
    WEEK_NUM             EDATE                NAME
    0                   30-MAY-10             JJ
    0                   30-MAY-10            null
    0                   30-MAY-10            null
    0                   31-MAY-10            MK
    0                   31-MAY-10            null
    0                   31-MAY-10            null
    0                   01-JUN-10             BK
    0                   01-JUN-10              JJ
    0                   01-JUN-10             MK
    0                   02-JUN-10             null
    0                   02-JUN-10             null
    0                   02-JUN-10             null
    0                   03-JUN-10             null
    0                   03-JUN-10             null
    0                   03-JUN-10             null
    0                   04-JUN-10             KK
    0                   04-JUN-10             LA
    0                   04-JUN-10             null
    0                   05-JUN-10             null
    0                   05-JUN-10             null
    0                   05-JUN-10             null
    --Number of Week 1 records should be 14 = (max occurances on 06-JUN-10)  * 7
    1                   06-JUN-10             BK
    1                   06-JUN-10             JJ
    1                   07-JUN-10             KK
    1                   07-JUN-10             null
    1                   08-JUN-10             null
    1                   08-JUN-10             null
    1                   09-JUN-10             null
    1                   09-JUN-10             null
    1                   10-JUN-10             null
    1                   10-JUN-10             null
    1                   11-JUN-10             LA
    1                   11-JUN-10             null
    1                   12-JUN-10             null
    1                   12-JUN-10             nullI would appreciate it if you could help me to find efficient way to achieve this?
    Thanks,
    GM
    Edited by: user12068331 on Sep 28, 2010 2:17 PM
    Edited by: user12068331 on Sep 28, 2010 2:48 PM

    Ok,
    Few things to clarify first :
    1 - How do you define week number ?
    Oracle has 2 different way for week number : normal week number (WW) and isoweek (IW).
    is your weeknumber one of those, or is it something else ?
    2 - Depending on the country the week doesn't start on the same day : in France (as most of Europe I think) first day is monday, where in the USA (as far as I know) first day is sunday.
    the to_char builtin function can display weeknumber :with a as (
    --week 0
    select 0 as weeknum, to_date('30-MAY-2010','DD-MON-YYYY') as edate, 'JJ' as name from dual union all
    select 0 as weeknum, to_date('31-MAY-2010','DD-MON-YYYY') as edate, 'MK' as name from dual union all
    select 0 as weeknum, to_date('01-JUN-2010','DD-MON-YYYY') as edate, 'MK' as name from dual union all
    select 0 as weeknum, to_date('01-JUN-2010','DD-MON-YYYY') as edate, 'BK' as name from dual union all
    select 0 as weeknum, to_date('01-JUN-2010','DD-MON-YYYY') as edate, 'JJ' as name from dual union all
    select 0 as weeknum, to_date('04-JUN-2010','DD-MON-YYYY') as edate, 'KK' as name from dual union all
    select 0 as weeknum, to_date('04-JUN-2010','DD-MON-YYYY') as edate, 'LA' as name from dual union all
    -- week 1
    select 1 as weeknum, to_date('06-JUN-2010','DD-MON-YYYY') as edate, 'BK' as name from dual union all
    select 1 as weeknum, to_date('06-JUN-2010','DD-MON-YYYY') as edate, 'JJ' as name from dual union all
    select 1 as weeknum, to_date('07-JUN-2010','DD-MON-YYYY') as edate, 'KK' as name from dual union all
    select 1 as weeknum, to_date('11-JUN-2010','DD-MON-YYYY') as edate, 'LA' as name from dual
    select to_char(a.edate,'IW') isoweek, to_char(a.edate,'WW') numweek, a.*
    from a;
    IS NU    WEEKNUM EDATE                          NA
    21 22          0 Sunday    30/05/2010 00:00:00  JJ
    22 22          0 Monday    31/05/2010 00:00:00  MK
    22 22          0 Tuesday   01/06/2010 00:00:00  MK
    22 22          0 Tuesday   01/06/2010 00:00:00  BK
    22 22          0 Tuesday   01/06/2010 00:00:00  JJ
    22 23          0 Friday    04/06/2010 00:00:00  KK
    22 23          0 Friday    04/06/2010 00:00:00  LA
    22 23          1 Sunday    06/06/2010 00:00:00  BK
    22 23          1 Sunday    06/06/2010 00:00:00  JJ
    23 23          1 Monday    07/06/2010 00:00:00  KK
    23 24          1 Friday    11/06/2010 00:00:00  LA
    11 rows selected.

  • How to add extra blank space in xml

    I open the xml file in notepad I get this
    <XXON_EXT_BANK_ACCOUNT_NAME>創名聯合會計師事務所                                        </XXON_EXT_BANK_ACCOUNT_NAME>
    But when I open the xml file in html format the blank space is gone.
    How can I add extra blank space in xml?

    Hi
    Why do you need the extra space for?
    This difference in display that you see between your browser and notepad/notepad++
    will not affect your generated report.
    Bogdan 

  • How to add extra lines in the address field?

    How, if possible, to add extra lines in the address field? For example, the street address might require two lines:
    Bob Smith
    Newport A  Unit 32
    Century Village
    Aventura, FL 

    Thanks, Barney! It's even easier than the solution I came to: copying and pasting into the field. 

  • How to add extra field in cube

    hi guys,
    iam learner of bw.
      iam extracting the data from r/3 to bw.
    for example sales cube(0sd_c05).
    i want to add one more field in r/3 side according to client req for ex.in 2lis_11_vahdr.
    how to add that extra field in 0sd_c05.
    kindly give me steps one by one for my understanding.
    i will appreciate and giving points .
    thanku

    Kumar
    To do that first you have to enhance the Datasource 2lis_11_vahdr in R/3 side with new fields and populate these fields with data using user exit. As a next step as this field in to your Cube
    Please see these links for enhancements
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
    Re: enhancements
    Hope this helps
    Thnaks
    Sat

  • How to Add extra link at top My dashboard OBIEE page.

    Hi folks,
    I have a requirement wherein I need to add extra link besides the Answer, dashboards link in the OBIEE my dashboard page. Could you please let me know how to achieve it.
    Thanks

    Hi,
    I think the above customization is kind of normal customization. I am looking add up new link besides Dashboard - Answers - Administration - My Account Tabs and make it functioning. How is it possible to make that happen?
    Thanks:
    Apurv.

Maybe you are looking for