Satellite U200 - questions about screen refresh rate

Sattellite U200-148 WINXPHOMESP2
Video adapter Mobile Intel (R) 945GM Express Chipset Family
Volume of video of memory 128
Problem Accelerated Graphics Port - it is inaccessible
Frequency of hertz the screen 60
Questions
1) Accelerated Graphics Port - there is enabled if yes that that it is necessary to make that it became accessible.
2) whether Frequency of hertz with 60 can be raised even up to 75.

Hi
I have noticed that on some Toshiba notebooks the screen refresh rate is fixed on 60 Hz.
The display refresh rate is not important on the notebook screens.
TFT matrix doesn't have such thing as refresh rate. It doesn't blink.
TFT like all other LCD screens doesn't have refresh rate parameter, only reaction time.
Your eyes are safe ;)
Ps: As far as I know the AGP port is not available.

Similar Messages

  • Satellite M55-s3315: Screen refresh rate is 60 Hertz?!

    I have bought Toshiba m55-s3315 analog m50-s.... with intel 910 built-in, shared dynamic 128 mb memory; screen - 14.0" WXGA widescreen display with Toshiba TruBrite . Only refresh rate i get is 60 Hertz. I have updated intel chip software and toshiba also ... I would like to know is it possible to get more than 60 Hertz. The only way is to get 85 Hertz is to add extarnal monitor. I there oportinity to get at least 75 Hertz screen refresh rate ??? It was possible with my old HP Pavilion ze 5000.
    May be someone could explain me??
    Thank in advance!!!

    Hi
    I have noticed that on some Toshiba notebooks the screen refresh rate is fixed on 60 Hz. I have two of them. On Tecra M1 is fixed and on Satellite 1900 not. I have tested it and there is no difference if the refresh rate is changed.
    The TFT technology is much better than on usual monitors where the display flickering is visible on lower refresh rate. On display you will not see any flickering. In my opinion there is no reason for panic.
    Enjoy the life!!!

  • MacBook Pro Screen Refresh Rate

    I got one of the new santa rosa 15-inch macbook pros with a glossy display about 3 weeks ago. When i play games or look at display settings, i can't change the screen refresh rate. For example, in battlefield 1942, in the display settings i get a rate of "0"for my built in display! Not "60", or "75", just "0". Also, in the display preferences tab in system preferences, there in no refresh rate to set, but all other displays i connect have a refresh rate setting. How to i change the refresh rate of my built in display?

    as far as i'm aware, LCD displays do not have a refresh rate per-se
    the reason is because refresh rate is a term applied to Cathode Ray Tube monitors (read that as your standard computer monitor, not an LCD one) and in particular the refresh rate is how many times the gun in the monitor rasters a horizontal line onto the screen in one second.
    with LCD displays, because they don't use a gun and are not based on CRT technology, they don't have a refresh rate
    i could be wrong though, but i'm sure i read somewhere about this

  • How to change screen refresh rate in windows 7sp1 and windows 8.1 iso image using dism

    sir when i install windows 7sp1 and windows 8.1 then after the completion of setup when first time windows boots up then task bar is not shown and display is not clear and when i check under monitor settings the screen refresh rate is 60 Hertz and when i
    set the screen refresh rate from 60 Hertz to 75 Hertz, then everything is OK, plz tell me why this happens?
    why windows 7 sp1 and windows 8.1 automatically sets the screen refresh rate to 60Hertz instead of 75Hertz.
    how can i set screen refresh rate 75 Hertz permanently in iso image using DISM ?

    That is not a function of DISM. Resolution and refresh rate capabilities can be determined by multiple causes. Drivers are one, another is that most modern displays will report their capabilities to Windows.
    You can specify display settings with an answer file however:
    <Display>
    <HorizontalResolution>640</HorizontalResolution>
    <VerticalResolution>480</VerticalResolution>
    <ColorDepth>16</ColorDepth>
    <RefreshRate>60</RefreshRate>
    </Display>
    http://technet.microsoft.com/en-us/library/ff716344.aspx

  • A question about screen updation of T61

    Hi there
    I got a question about screen updation. 
    Currently, my T61's screen is 14.1 XGA TFT 1028x768, and it can't work, thus I am considering to replace it with the better 14.1" SXGA+ LCD SCREEN .
    However, I am a little concerned about the compatiblility problem, hence I just wonder whether the new SXGA+ screen can fit for my current T61 laptop or not?? Thanks a lot for your answers!
    Regards
    Peng

    you can buy it from IBM parts, and it will then sure to work for your laptop.
    Here is the manual that shows you how and what parts you need:
    http://www-307.ibm.com/pc/support/site.wss/MIGR-67979.html
    P.S. If you have warranty this upgrade will void your remaining laptop warranty, as the LCD is not CRU (customer replaceable unit). 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Screen refresh rate

    Please does anyone know the screen refresh rate of a Macbook Pro 2.4 GHx Intel Core 2 Duo (Is this is a 60 Hz monitor?). I am conducting a psychology experiment, and I really need this information, and I cannot find it in system profiler? thank you!

    just another reason why this was the best investment i have ever made. i +++++ love mac and the "family" thereof! lol
    I tried to mark as "solved" but I get an error!

  • What is the iPad 2's screen refresh rate?

    I don't know what the iPad 2's screen refresh rate is, and I've looked pretty much everywhere. I am looking to develop a 3D system for the iPad 2 or 3, but I can't untill I know the screen refresh rate. Does anybody know?

    60 Hz

  • What should my screen refresh rate be?

    Hi guys, ive never really understood the refresh rate for screens. I have a geforce 4 ti4200, and my refresh rate is 60hertz, what should it be, or whats the best? Thanks sasarchiver

    100 and more is the best for your eyes. 85 is the lower limit for "blindness".....  ; 60Hz is the lowest possible of your monitor and can harm your sight  when long-acting.
    you have max. vertical and horizontal freq. of your monitor and a screen resolution (for example horizontal 1024x768 vertical)
    so you will know the max vertical freq. by counting: (max horizontal freq of your monitor)/(vertical screen resolution)*(0,95)=max refresh rate
    eg: you have max 110kHz of horizontal freq. and screen resolution of 1024x768
    so: (110000/768)*0,95=136Hz
    this is the max refresh but the graphics cards sopports only 120Hz so you choose 120Hz in your graphics driver 120Hz for this resolution.

  • Boot Screen Refresh rate

    Hi all
    I just installed a new Xserve on my network, and i'm having a problem with the refresh rate on the boot screen. No matter what I do, it wants to use 85hz, which I know the LCD cannot handle. There must be a way to force 60hz on the boot screen. I tried the instructions at:
    http://wiki.osx86project.org/wiki/index.php/TipsAndTricks#
    Messingwith_the_bootoptions
    But it seems to ignore the @60 I put in.
    When I use a regular screen, it comes up at 800x600 at 85hz.
    Thanks!

    No one has any ideas on this? Still haven't been able to find a solution...

  • How to set screen refresh rate for linux console (runlevel 3)?

    Hi,
    I have a CRT monitor, so the refresh rate is always needed to configure. I use 720x400 resolution in console, but the refresh rate is 70hz. Are there any ways to get it higher in console (with KMS or without)?
    Last edited by AleXoundOS (2009-11-04 12:27:09)

    thank you for replies
    But setting the resolution, e.g. vga=773, would not change the refresh rate, or would it?
    It would, but usually not to the maximum provided by the monitor. May be it is real to find the place, where it looks for available resolutions linked with refresh rates...
    According to the Gentoo page I can use uvesafb for setting refresh rate as well as other settings. And then I found uvesafb page in ArchWiki. But the way to set proper refresh rate is not so easy as I expected, because I need to install uvesafb and it needs additional daemon. And also I think KMS can't work here. However it's better than nothing, if I don't find any other way, I will try this one.

  • Satellite 5100 - Question about dead pixels. Is it really dead pixel problem?

    Hi,
    I've got Satellite 5100-603. There have been some dead pixels on display. I don't know is it really dead pixel problem or not because the black area seems to be behind the screen. When i move left and right sides, the black area moves left and right sides too (as if the black area is behind the screen pixels)! And i can tell that all pixels are working OK when i look from the right and left sides of the display (because the pixels that seems to be dead, changes at different looking angles).
    Are there really dead pixels or is it some other problem?
    Is there anything that i can do about it?
    For info, i am using my laptop for 2,5 years and there is no warranty of course...
    Thanks for any help..

    Hi
    to answer your question I will try to make a simple description the layout of the TFT display.
    I'll go from the front to the back.
    In the front is a tough plexi-glass like layer to protect the screen from harm and the user from glass in case the TFT should break. It is also prepared in a way that will soften the reflections from behind (that does not go for the newer SuperBright screens).
    Behind that is the 2 layers (at least 1 of glass, probably both) that hold the actual matrix of the pixels.
    Behind theese 2 are a very complex set of layers that take care of the backlight. It consists of various numbers of films that should spread the light from the singel FL-tube evenly across the complete screen. Not a easy task if you ask me!
    Sometimes, physical stress or dirt can make 'blotches' appear on the screen and they are in fact either dirt on the backmost layer or marks on the same. If there is dirt or marks on it, that will 'shadow' the light that comes out from it and show dark spots on the screen. They are quite different from defective pixels.
    The defective pixels do not change with the angle of view for example.
    I think you cannot do anything about this except changing screen. The construction is very complex and sensetive.
    BR Tom

  • Satellite 2410: Question about different ways to use BlueTooth

    Hi,
    I'm having trouble finding somewhere to purchase a bluetooth module for my Toshiba Satellite 2410 - the handbook says I can, and I know there is space on the underside of the laptop to insert it.
    I just can't seem to find one to buy - does anybody know if they actually exist, as I am beginning to think not??!...or is the cheapest way to bluetooth enable the laptop to buy a USB adaptor?
    If so, will a cheap one affect the download rate when using the Internet?? And what is the difference between an SD card and a USB bluetooth adaptor?
    Any help would be much appreciated.

    Well, with the detailed name I mean the full notebook number Satellite 2410-xxx.
    However, you ask what a difference between Wireless Lan and Bluetooth.
    The WLan is technology which allows you using or/and to create a LAN but without the cables.
    ;) The Wlan routers for example allow you to connect to the internet without the cable connection.
    Bluetooth technology:
    If device like (mobile phones, printer, etc) support BT technology and you notebook uses also a BT so it's possible to connect these devices without cables. The devices should be placed in the available range.
    I would recommend searching a little bit in the internet for more information about Wlan and Bluetooth

  • Tecra 8200: Question about screen 14.1 replacement

    Hi, my screen only shows the left hand side, a line goes down the middle and the right hand side is blank. If I hold the screen outer tightly on the top left hand side, the whole screen lights up as normal. I have attached a remote screen and this works fine. I have been told this is a screen fault.
    The screen part No is LTM14C438, they are very expensive. I can get a different screen number (LTM14C433), which is a 20 pin toshiba from a TE2000, and I am told it will work.
    Can anyone confirm this, thanks, Allan

    Thanks for reply. I saw a screen on Ebay and asked the question, the reply was that he did not know for sure, however if it was a 20 pin connection and the conection was in the same place, he was sure it would work. I was just trying to confirm. I rang Toshiba, they gave me 3 compatibale Part No's. They then informed me a new screen would be about 284. I am persisting with a remote screen until I find out one way or another. Thanks again. Allan
    Message was edited by: [email protected]

  • Satellite A200 - Question about HDD partitions and RAM

    This may be in the wrong section... I don't know.
    I've never owned an OEM OS and I also don't understand why the HDD comes partitioned 90, 2, 90 (who thought of that?).
    The thing is that I have to format and partition differently (since I have to dual boot Linux) and need to create a structure more like 40,40,100 or such. (100 being fat32 so data can be accessed for both)
    Now I'm just wondering which data I should be keeping from these drives. There's a folder called Toshiba on the C:\ drive which seems to have drivers and such, a few wallpapers and who knows what else. Then there's the D: drive called WinRE which has some sort of sdi and wim files.
    Another question, if I buy the 2GB which is listed in the compatible options for my laptop (A200-28P)
    Link: [http://uk.computers.toshiba-europe.com/innovation/jsp/individualOptions.do?service=UK&OPTION_ID=138301&t oshibaShop=true&selCategory=4700]
    Will it match the 2GB already in the laptop? Will it void the warranty in any way?

    Yes, I am using Vista, sorry, I forgot to mention that. The drive however is definately not hidden (it's clearly visible as the D drive and labelled WinRE).
    I'm not an idiot. I understand it, but you have got to admit that giving the OS 90 is a bit extreme and obviously I know what I can do with the other 90.
    I'd also like to point something out:
    "It's always advisable to partition an large HDD in more partition. This improves the performance because OS can access the files much faster."
    This is more than just an urban myth, it is down right stupid to believe that. After all, the data has a physical position on the drive and partitioning doesn't change the fact that it still has to get the needle to point to the location where the data is located on the drive.
    The needle still travels the same distance as referred to by the MFT.
    The question is if I can alter the partitions when using the strange Toshiba recovery disk. Afterall OEMs don't come with standard install disks and seem to limit your options.
    Again regarding the ram, I know the laptop can run 4 gigs, but I want to know whether the 2GB stick I'd buy from Toshiba would be the exact same as the one already installed, as in same timings and such.
    So in conclusion the data on D is worthless. What about the stuff in the Toshiba folder? And sorry if I sound condescending or like an *insert disallowed word here*, I'm just not in the best mood right now (serious data loss on my project because of a Uni server crash!).

  • Satellite P850 - question about Infrared port

    Hi,
    I have Windows 8 Pro installed onto my laptop and I've downloaded all the drivers and everything is working fine apart from the Infrared. I've searched all over the internet and I can't find a remote control to use with this laptop (including the Toshiba website).
    I've installed the latest ENE CIR Driver (v4.1) as well as the Toshiba Remote Control Manager (v3.1.0.1). I looked in Program Files to open the Toshiba Remote Control Manager however when I click on the program to open it... Nothing happens (including in the notification area).
    So my question is can I actually get a remote working with this laptop at all and if not then what is this Infrared port for because I can't find anything on my computer to actually use it with/for?!
    Thanks for your help :p

    Hi
    Some Satellite P850 models are equipped with the remote controller and its possible to use the remote controller with Windows Media Center to play discs or videos, to view pictures and to watch recorded TV programs.
    Models which dont include the a remote controller are *NOT* equipped with the an infrared receiver so the notebook cannot be operated with a remote controller.
    The remote controller was not part of the package so your notebook does not support infrared receiver and therefore the installation of ENE CIR Driver and Toshiba Remote Control Manager was useless

Maybe you are looking for

  • The worst service I have ever had with apple.

    Ok, about a week ago my ipod mini started to show very obvious signs of hard drive failure. I now know this is very common with ipod minis. I took this ipod to the apple store in victoria gardens, and got an appoitment at the genius bar. I have never

  • Shell script for start stop and restart standard

    Hi, I'd like to know if there's a standard template for shellscript for a kind of stop|start|restart execution of a server or stub. If you have any link or some info that explain how to do that nicely it would be nice! Thank you

  • Software Update Availability for Lumia 710

    When updates are available for lumia 710 Moderator's notes: Appropriate subject provided

  • Migrating from an eMac to my new iMac

    Hello, I need to migrate all of my info from my eMac to my new iMac. How is this done between the computers? Do I use a USB cable? What steps do I need to take? Thanks

  • How to change the short name????

    i bought this iBook G4 off a friend and i was only able to change the name and pass on the account part and was not able to change the short name... it a chicks name so i dont want that to show on there,, does anybody know how to change that ??? than