Satellite U300-130 - TosBtMng has stopped working after Nokia PC Suite installation

I've got the same problem too... with Toshiba Satellite U300-130.
Bluetooth had worked pretty well before I installed Nokia PC Suite for my mobile on my PC (the newest version 7.1.26.0 from website).
To be correct, at first I even managed to maintain a Bluetooth connection between PC and Nokia and ran syncronisation of contacts. I made several attempts but each time syncronisation run ended with message "PC coudn't get answer from your Nokia".
After rebooting, my PC went crazy and started issuing message "TosBtMng has stopped working" and it restarted every time I ask it to close.
Installation of new version of BT Stack (6.40) didn't fix this error.
Please help

Hi there
I answered an existing thread with the same problem, but no-one can help apparently.
Anyway,,, I can at least help you with getting rid of the looping setup. You need to rename the directory with the Toshiba bluetooth stack.
I also have Nokia syncing and it worked fine until recently. - I have to say I think the problem relates to a Windows auto upgrade.
How to solve this is a different matter. At this moment I have given up. The Toshiba bluetooth stack disabled.

Similar Messages

TosBtMng has stopped working

I keep getting the following message whenever I boot the system:
"TosBtMng has stopped working" - A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
I have downloaded patch and the relevant drivers, even then it is my blue tooth is not working and a small window pops up with the same message.
How to fix this problems? - Plesae help

I get exactly the same problem.
I have a Satellite with Vista 32 bit and the Toshiba Bluetooth stack. I only use it with my Nokia phone and it has never worked very well. - But it HAS worked.
A few weeks back, it stopped working alltogether and I decided to check for an upgrade on Toshiba's site. I've found "Bluetooth Stack-6.10.10" which supposedly is the most current.
I have removed the complete directory and even used regedit to remove all keys pointing to the dir, before rebooting and installing from scratch with no luck.
The PC was originally delivered with several languages, but I have chosen to install the English version of Vista. For some reason, the bluetooth stack insists on installing in Danish (and there is no way to change that). I have a feeling that this is at least part of the reason for the problem.
Since the problem suddenly occured. At one time, I had some kind of a loop with 20+ active TosBtMng.exe icons in the system tray. Every time I start it I get the following:
Problem signature:
Problem Event Name: APPCRASH
Application Name: TosBtMng.exe
Application Version: 6.0.0.41
Application Timestamp: 48035c96
Fault Module Name: LCWizard.dll
Fault Module Version: 6.0.0.3
Fault Module Timestamp: 48086c03
Exception Code: c0000005
Exception Offset: 0000654b
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1030
Additional Information 1: 2754
Additional Information 2: e9a6e859a1d82acb13beb9db09d30e0e
Additional Information 3: b4f0
Additional Information 4: 71c2b4bb7812ee3f7b43ad13722a43de
Hope you can help.

My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update.

My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update. It's not my home sharing or router setting, I have an ipad that I haven't yet updated that works completely fine and my network is run on the newest AirPort Extreme.

i have same problem but much worst.. i update my iphone4s ios 7.1.1 to 7.1.2 and my iphone CAN'T READ MY SIM, MODEM FIRMWAY GONE, IMEI GONE, and same issue as you guys can't hear sound on my speaker but using earphone works, battery drain much faster than before. Any suggestion guys to Fix my iphone.thanks a lot. APPLE PLEASE FIX. TAKE ACTION.

My distributed form has stopped working after Acrobat did an update the form no longer appears in my tracker.

I had a form that auto collected data through Adobe but it has stopped working after my Acrobat X Pro did an update.
The form no longer appears in the tracker. How can this be fixed? I am using Windows 7.
It would appear that since Adobe are going to be closing the Workspace area in January 2015 that when
Acrobat did an update the ability to connect to files in the Workspace has been removed.
Is there any way to reconnect the file back to the Tracker?
Has anyone else had the same problem?
Adobe don't seem interested in helping as this question has been posted for three days and yet no response.

First and foremost thing you can do it is that reset your Firefox and after that change it to safe mode.This may be happening due to venerable links getting downloaded.
enjoy free web..... :)
regards,
Gautam sharma.

Adobe Acrobat 9.0 has stopped working (after Start Form Wizard)

Downloaded Trial for Adobe Acrobat 9.0
Tried reinstalling
Latest windows 7 patches
Adobe Acrobat 9.0 has stopped working
(after Start Form Wizard)
Windows can check online for a solution to the problem
details"
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Acrobat.exe
Application Version:    9.0.0.332
Application Timestamp:    4850eb76
Fault Module Name:    MakeAccessible.api
Fault Module Version:    9.0.0.332
Fault Module Timestamp:    4850e54e
Exception Code:    c0000005
Exception Offset:    000e1059
OS Version:    6.1.7600.2.0.0.256.1
Locale ID:    1033
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
===============================
===============================
SYSTEM INFORMATION
=========================
System Parameters
Available Physical Memory: 1429660 KB
Available Virtual Memory: 1912212 KB
BIOS Version: DELL   - 42302e31
Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
    Version: 8.00.7600.16385 (win7_rtm.090713-1255)
    Creation Date: 2009/07/13
    Creation Time: 4:43:32 PM
Default Mail: Microsoft Office Outlook
    mapi32.dll
    Version: 1.0.2536.0 (win7_rtm.090713-1255)
Graphics Card: Intel(R) G33/G31 Express Chipset Family
    Version: 8.14.10.1930
    Check: Not Supported
Installed Acrobat: C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.exe
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:25:18 AM
Installed Acrobat: C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe
    Version: 9.3.2.163
    Creation Date: 2010/04/03
    Creation Time: 10:57:52 PM
Locale: English (United States)
Monitor:
    Name: Intel(R) G33/G31 Express Chipset Family
    Resolution: 1024 x 768 x 75
    Bits per pixel: 32
OS Manufacturer: Microsoft Corporation
OS Name: Microsoft Windows Vista
OS Version: 6.1.7600
Page File Space: 4194303 KB
Processor: x86 Family 6 Model 23 Stepping 7 GenuineIntel ~2493 Mhz
System Name: DELLINSPIRON
Temporary Directory: C:\Users\alan\AppData\Local\Temp\
Time Zone: Pacific Standard Time
Total Physical Memory: 2097151 KB
Total Virtual Memory: 2097024 KB
User Name: alan
Windows Directory: C:\Windows
Installed Plugins
=================
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\Annots.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 1:59:50 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\EScript.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:05:18 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\PPKLite.api
    Version: 9.0.0.0
    Creation Date: 2008/06/12
    Creation Time: 2:08:24 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\SendMail.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:17:10 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\Updater.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:00:30 AM

To go along with Michael's suggestion, something like AA9.2 is needed for X64 systems I think. Also, be careful. Acrobat is not licensed for use on a server. Using it as a user is fine, but not as a server application. Read the license carefully.

My iPad 1 has stopped working after trying to instal iOS 5. Can you help restore?

My iPad has stopped working after trying unsuccessfully to instal iOS5. All that's currently showing on the iPad screen is a white USB cable with a thick arrow pointing towards the iTunes logo (black double note within a white rimmed circle and a blue background).I cannot switch it off and have seemingly lost everything that was on it.
Please help!

That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
iTunes: Restoring iOS software

TS3048 My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.

My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.What can I do?

Hello:
Try resetting the SMC and PRAM.
Barry

Equium - Tosbtmng has stopped working

For the last 2 days, any attempt to switch on bluetooth on my Equium has met with the message "tosbtmng has stopped working".
I downloaded the latest bluetooth stack and the only change was the wording of the error message to "bluetooth manager has stopped working". Using the function keys brings up this error. Drivers come up as up-to-date. slide button light comes on ok.
Any ideas?

Sorry for the delay. I have uninstalled and reinstalled bluetooth to no avail. I am thinking of returning it to factory defaults with the start up repair disc; if that does not work I can then return it to Toshiba under its warranty. Any other ideas??

Satellite P300: Display Driver has stopped working using external monitor

I have a number of these Satellite P300 PSPCCA-OC201Y and recently bought external monitors for them.
Since then we seem to be getting "Display Driver has stopped working and has recovered" messages, then after about 5 of these, it crashes.
Starting with one machine, I have updated display drivers, bios was current, all to no avail.
I then did a complete system restore back to original. Has not solved the problem.
Any ideas?

hi Keven Dickenson,
as you said you restored the system and still there is no way to get things work it may be a hardware issue...
i my opinion you should consult a servicepartner to check this out...
is there any of the machines working with the external monitor at all?
if none of them is able to connect to ext. display maybe your installation has a problem or the monitor is faulty...
try it with another monitor and recover one system to factory installation....

Satellite 1130-Z24,system has stopped working altogether

Hi
My system has stopped working altogether, since it was dropped, only from a small distance though. When connected to AC power, the light work, so I suspect power is getting to it, and I suspect I have damaged either the motherboard or power supply, but I am hoping something simple. Has anybody any manuals showing how to dismantle the satellite 1130, or any other suggestions.
Kind Rgrds
Chris

Hello Chris
Unfortunately there is no official document how to disassemble/assemble your Satellite. In my opinion the best solution is to contact service partner in your country.
I am pretty sure that they can help you. Who knows which hardware part is damaged.
Good luck!

"itunes has stopped working" after downloading album artwork??

For years I've avoided ipod and itunes like the plague...but about 2 weeks ago I gave in. I got an ipod touch and installed itunes. Everything was fine - until this afternoon when I clicked on find album artwork in itunes. After itunes finished going through the process of finding the artwork ( 1400 of 1600 files found, 1450 of 1600 found, etc...or something like that ), i got the error message that *itunes has stopped working*. I've been searching forums all night and tried uninstalling eveything "apple" and reinstalling. Apparently this error comes up for A LOT of people ( problems like this are why I never wanted an ipod... ). None of the recommended fixes are working. I'm assuming something went wrong during artwork downloading????? Or not? I don't really care why actually, but, if itunes crashes every time i hook up my ipod, what good is it ( or the ipod )...and i don't know what to do with the ipod ( how to download apps, or add music, photos and videos ) w/o the itunes. My previous media players were all drag and drop ease.
I'm a newbie - and i'm rally frustrated - so please be kind. Can anyone tell me - in plain terms - how to get my itunes to not "stop working" every time i hook up my ipod?? Please?
THANKS.

OK, so after looking everywhere for an answer - with no luck - I figured it out on my own ( don't ask me how... ). I'll tell you what I did. I bet you have the same problem. Honestly, I thought I'd be returning the **** thing, but it's fine now.
I'd plug in my ipod ( 32gtouch, like yours ), and itunes would open. Everything was fine until it started to sync my music. Then it would freeze, give me the error message, and then shut down. I did this probably 10 times throughout the day, and always the same. Then I noticed it always froze at the same place during the sync. Soooo, I finally realized I must have a corrupt file.
Step 1: Do as I did, but when it starts to freeze, take note of the name of the song it freezes on. That's probably the culprit .Remember it. Let the error message come up and close as always...
Step 2: Open itunes again! Click on your ipod, and then on the music tab. Immediately un-check "Sync music" ( top of the page ) and then click "apply" ( bottom right ). DO THAT FAST...before it has a chance to sync, or it will just freeze again!
Step 3: Go into your music library on itunes, and DLETE/REMOVE that song.
Step 4: Close itunes.
Step 5: Open itunes, and go again to your ipod, and click on music tab. This time, check the "sync music" box ( and apply ).
That should fix it. If it doesn't you have more than one corrupt file. In that case, close itunes and then open it again. Follow step 1 and 2 again. Remove any songs from your library that aren't that important to you ( especially those that were from questionable sources... ). Basically, you need to figure out which song ( or songs ) are causing the problem. If you just delete them all, you'd have to add them again one at a time to avoid the problem again, and that would be a pain. So, just remove as many as you feel like ( out of 1500 songs or so, I removed a couple hundred ). I left mainly the ones that were from my actual CDs or that I had bought through Amazon ( or other legit source ). I removed most of my Limewire downloads. Most of them are probably fine, but I'll add them later one at a time to be sure...
I still have plenty of Limewire songs on there, and they are fine, but, as you know, you do get bad files sometimes.
Anyways, once I did this, everything is fine and works great. I even started adding album art manually, and at one point it froze again. So, I did steps 1 and 2 again, and removed the album art I last added, and then synced again, and it was fine. Usually, the album art I add is OK, but I had that one pesky photo I guess ). So, I guess the thing is after you get the majority of your music on, just add and adjust things a little at a time, and you'll always know which file is causing you problems ( hopefully no files will!! ).
I hope this works for you. Let me know if you have any questions, and let me know if it solves your issue too!
Peace.
-***

"Mobile Device helper has stopped working" after installing most recent

OK. Like a thousand other threads that have been posted over the past week or so on this topic and having tried most of the suggestions, I find myself at a loss.
After most recent update (which I installed on Monday) from 3.1.2 to 3.1.3 all **** has broken loose between my *iPhone, iTunes & Outlook*. This all came to light just hours after the install. . . . I noticed that my phone wasn't syncing - at all, it just "hung" there then I went into my contacts in Outlook - gone. . . UGH, EEK, OK, so they're still on my iPhone BUT I can't get to them in Outlook. After loosing most of yesterday and all of today I am at the mercy of someone who might know how to resolve this issue.
_*Steps I have taken :*_
I have un-installed and reinstalled iTunes 5 times, no luck, I've restarted, yada yada yada. I've hidden my Norton's Internet Security, allowed iTunes, etc. *Still no luck*. Take in mind, all was great after months of perfect syncing, etc. no problems whatsoever . . .
*The two messages that I continue to get when I open iTunes and connect my phone:*
1) "Mobile Device helper has stopped working"
2) " Unable to load data-class information from Sync Services. Reconnect or try again later".
The most recent error message under "Problems Reports & Solutions" on my start menu read:
Product: MobileDeviceHelper
Problem: Stopped working
Date: 4/7/2010 3:42 PM
Status: Not Reported
Problem signature
Problem Event Name: APPCRASH
Application Name: AppleMobileDeviceHelper.exe
Application Version: 16.691.14.1
Application Timestamp: 4ba3b8fe
Fault Module Name: CoreFoundation.dll
Fault Module Version: 1.550.17.21
Fault Module Timestamp: 4b8cb530
Exception Code: c0000005
Exception Offset: 0000db6b
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
This is the same message that I have received the last 10 times under Mobile Device Helper.
*Please PLEASE please*, does anyone know how to resolve this problem?
*Thank you SO MUCH for any insight.*
-signed, UGH!!!

Hi,
I have had the same experience... uninstalled and reinstalled iTunes and all Apple components only to now be in a position where I can't sync my iphone at all (before I started trying various solutions I could still sync music... now nothing!) and I continually get the messages "mobile device helper has stopped working" and then "iTunes was unable to load dataclass information from Sync Services. Reconnect or try again later".
I even tried reinstalling iTunes 9.0 but somehow I don't have the old library saved - means I lose all the ratings, playlists etc.
Really frustrating and disappointing.

"itunes has stopped working" after connecting ipad mini to computer Windows 7

itunes can play 2 out of 10 movies already on my computer. Otherwise, when I start to play the other movies, I get the notice itunes has stopped working etc.
Quicktime Player VERSION 7.7.4 can get to the Apple Store and order a movie. But when I insert my Ipad mini, itunes IMMEDIATELY "itunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I reinstalled lastest itunes 11.1.3 after uninstalling it, and placed it not on the C Drive, which is pretty full but on another drive. I use ImTooiTransferPlatinum to put muisc onto my ipad mini, not itunes.

also when I open itunes in safemode (using shift+ctrl), it works normally...

Adobe reader X has stopped working after autoupdate to 10.1.2 in windows 7 sp1 64 bits

Hi! My PC is Windows 7 sp1 64 bits and installed adobe reader x 10.1.0 traditional chinese. Several days ago,it had been changed to new version -- 10.1.2 after autoupdate. From then on it couldn't work and clicked "adobe reader" icon in desktop then gave me a message saying "Adobe reader has stopped working",how can I do? Can every one solve it? Thanks!
The Contents of Windows Event Viewer is under:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2012-01-16T15:48:26.000000000Z
EventRecordID
98171
Channel
Application
Computer
leekm-PC
Security
EventData
iexplore.exe
9.0.8112.16421
4d76255d
AcroRd32.dll
10.1.2.45
4f02f76f
c0000005
0011292c
1fb8
01ccd46646ec790b
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.dll
86ba9536-4059-11e1-ba94-005056c00008

Hi,
It could be a case of a corrupt installation which could be causing the crash.
Could you please follow, ʇɐb ɹəuəllıʍ suggestion, and uninstall the current installation of Adobe Reader 10.1.2 and restart if prompted for.
Try and install Reader 10.1.0 again (from ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.0/zh_CN/AdbeRdr1010_zh_CN.msi).
Now update the same to 10.1.2 using the installer from http://ardownload.adobe.com/pub/adobe/reader/win/10.x/10.1.2/misc/AdbeRdr1012.msp
Try and launch Adobe Reader post the successful installation.
Do ensure not to launch the application during the updating process.
Hopefully this should fix things.
Thanks
Ankit

Satellite Pro L500 - Webcam has stopped working

The built-in Web Camera on my Satellite Pro L500 has stopped working with the following message:
C:\Program Files (x86)\Toshiba\Toshiba Web Camera Application\TWebCamera.exe
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
The Event log points to microsoft.vc80.openMP.......
Could someone please tell me how to fix the web Camera. I very rarely use it so I do not know exactly when it stopped working.
Thanks.

Thanks to TwoLags & PauPau.
Yes, I did think @ re-installing the driver but wanted to see what others think about it as I am quite new to Toshiba and was not sure if I could selectively install applications from recovery DVDs.
Removing the old driver and re-installing the one downloaded from TOSH has solved the problem During the re-install, I noticed it re-install MS Visual C++2005 redistributable. THIS IS THE culprit. This litttle bit of software comes bundled with many apps and I guess this was got installed with one of the new apps that I installed recently and must have messed up the original settings.
Thank you all, thw WebCam is back in action.

Satellite U300-130 - TosBtMng has stopped working after Nokia PC Suite installation

Similar Messages

Maybe you are looking for