Satellite U300-152: How to disable Narrator from Ease of Access in Vista?

Everytime I log on the narrator dialog box shows up automatically. I just try to use this Ease of Access tool in Vista home premium but now I dont want it to be there automatically when windows starts. I went to control panel and go to Ease of Access but there is no button to disable it. Any ideas on how to do it? Thanks in advance.

I found it and did it. From the control panel, go to Ease of Access Center, then optimal visual display, then uncheck the box where the turn on narrator is checked. Click Apply or Ok. Viola its done. Then if you want it to apply to all users in the notebook, go to administrative settings and tick the box changes apply to all users then save it again.
.....Uncheck the box also on the turn on narrator inside the ease of access button to disable it when the screen is where you choose to click the users. it is shown below left of the screen.

Similar Messages

How to disable erase from find my phone?

my ipad and mac was stolen. in Find my phone erase was enabled, when ipad was found as everything was erased, could not be located. i don't want that to happen with my (ex) Mac, how to disable erase from find my phone.
Thanks

Do not use Erase. Instead use Lost Device. However, if the items are automatically erased then you cannot locate them nor change the setting.

How to disable skype from background in lumia 920

how to disable skype from background in lumia 920. skype all time running in background and i can't disable it, everyone can send me messages and calls, and this feature is eat batery lifetime

Thats what is mentioned in my post ..
farby wrote:
Have installed Skype on my Nlokia Lumia 920 since a long time and on an average the battery lasts more than 2 days ..
BTW there is no way you can stop the application running in the Background ..(settings-->applications-->background tasks-->advanced ..and read the note at the top ..)

Cannot figure how to disable youtube from ipod4g. Have disabled Safari but installed Google app with safesearch on. I want my daughter to be able to search wed, just not youtube. Tried to restrict YT, but It would not save restriction settings.

Cannot figure how to disable youtube from ipod4g. Have disabled Safari but installed Google app with safesearch on. I want my daughter to be able to search wed, just not youtube. Tried to restrict YT, but It would not save restriction settings.

Try to get the Google app to work
iOS: Troubleshooting applications purchased from the App Store
Contact Google
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod
Try using anothere "safe" browser.
Parental Control???: Apple Support Communities]
How to Setup Parental Controls on iPhone & iPod Touch | Mobicip Blogs, Discussions & Help
how do i put parental control on my...: Apple Support Communities
parental control: Apple Support Communities

Is it possible to disable some popups from FEP Client on the desktop. But how to disable popups from real time protection

Is it possible to disable some popups from FEP Client on the desktop. But how to disable popups from real time protection. This is so that end users who are non technical are not disturbed and only the I.T is aware of the viruses in teh environment.Shahid Roofi

You could set policies which when a malware detected an action perform automatically without user interaction but there is no GPO which stop the notification, one reason could be that when notification keep appearing, then user will know something is wrong
otherwise why FEP should display any warning.

Satellite P50T-A016. how to disable edge swipe gestures

Hello,
I have Satellite P50T-A016 laptop runing windows 8.1 and I'm attempting to turn off the charm bar. After researching various websites/forums, it appears the charm bar is hardwired into windows and Microsoft provides no option to turn it off directly.
These websites/fourms also suggest disabling edge swipes gestures will indirectly turn-off the charm bar.
After I de-select "control pannel -> mouse -> enable edge swipes" and reboot the laptop, edge swipes are still being detected.
Why is edge switpes still enabled?
How to disable edge swipes?
Regards
Graham

> I have looked at the link. It is address multifinger gestures and sensitivity. I also noticed that the link leaves the "Enable edge swipes" option selected. So I'm not sure how this link helps.
The link and the HowTO helps you to find the touchpad Synaptics settings!
It shows you where to disable or enable settings which would be also related to the touchpad edge swipes.
> Regarding the charm bar, as a desktop mode user of windows I don't use it. The only time I have used it is when I have inadvertently turn it on when I switch between mouse (default), touchpad and touschscreen. It just get in the way even when hot corners are disabled.
Well, buddy you are not alone with this opinion but this is how it works and Microsoft decided to design the Win 8/8.1 system in this way
> When the "Enable edge swipes" option deselected then right-edge gesture on the touchpad no longer triggers the charm bar opening. Great!,
Thats right and this is how it works
> However, the right-edge gesture on the touchscreen is still enabled.
Dont mix touchpad with the touchscreen! The edge swipe settings in touchpad are NOT related to touchscreen!

How to disable iMessage from a computer if your iPod got stolen?

My iPod got stolen and I have things I don't want people to see on it, How can I disable iMessage from my computer?

- If you previously turned on the FIndMyiPod feature and location service is on, and wifi is on and connected go to iCloud, sign in, and go to FindMyiPhone. If your iPod shows you can remotely wipe it. Otherwise there is nothing you can do.It the iPod has been restored it will never show up.
- Did you have a screen-lock passcode ?
- Report to police and change the passwords fro all accounts used on the iPod.
- Apple will not help
Reporting a lost or stolen Apple product

How to disable MOH from playing on 1 queue

We have several queues in our
CUCCX ver 5.0 and need to disable MOH from playing while
callers are on hold for 1 queue. Does anyone have any info on this?

Hi Carlo,
The MOH is played to the customer via the CTI ports. So when the CTI port places the caller on "hold" they hear whatever the hold source is defined for that port.
So, if you have a Call Control Group with all the CTI ports and you are using your CSQ's so that they share those ports across all CSQ's then you can only do an all or none on the MOH because you can only change that to the whole CCG. When you navigate to appadmin and find under the Subsystems - Unified CM Telephony menu to the Call Control Group, choose the group you want to change. Then click the Show More button at the bottom and look for the following:
User Hold Audio Source
Audio source heard by the caller when the Cisco Unified CCX Script places the caller on hold via the Hold Step (when the user presses the hold key).
Network Hold Audio Source
Audio source heard by the caller will when Cisco Unified CCX performs a Consult Transfer (when Unified CCX calls an agent). Use this entry for the .wav file (for example, .wav file playing a ring back tone) to be played to the caller during this Consult Transfer.
If these values are set to None, then the callers will not hear any MOH.
So to summerize, if you are sharing one CCG with all CSQ's you will affect all CSQ's if you change this value. If you want to ensure that only the CSQ that you want to disable the MOH on is affected, I would recommend creating a new CCG with User Hold and Network Hold set to None and assigning that to the CSQ that you do not want MOH on.
Hope this answers your question.
Mike

How to import videos from iphone 5c into windows vista

How can I import videos from my iphone into windows vista.

http://lmgtfy.com/?q=how+to+import+videos+from+iphone

How 2 prevent time from changing on leopard and vista?

if i maintain successive boots into the same OS on my macbook, the time is shown correctly, whereas on booting into another OS changes the time. how to prevent this from happening?
Neerav

From what my brother says says about his set-up (he boots into 64 bit Vista periodically), apparently you can't. My understanding is that the two systems do a different version of time at boot, Vista uses a GMT setting in bios, and I think Mac use a local time in EFI. Anyway, the result is several hours difference between the two. I don't use Boot Camp, but I would think if you are on a network with Internet access, you should be able to have the clock reset automatically using System Prefs->Date and Time, and check the box at the top to automatically set the time from the Apple time server.
Francine
Francine
Schwieder

Satellite A350-07C - How to transfer movies from camcorder?

Hi Everyone. Just wanted to know if anyone knows how I can upload movies from my Sony DCR-TRV19E that has USB and DV iLink slots into my Toshiba Satellite A350/07C?
My understanding is that Sony does not support USB drivers for Windows Vista and 7 (and why not!?) which leaves me the Firewire which in this case is the iLink (DV) slot on the camcorder. Where do I stick this in the Toshiba? Does my Toshiba have a different look Firewire? I know that in my Device Manager I have something that is called ieee 1394 OHCI Complient. But where excatly is it on my model? Is it the little slot on the left that looks like the DV of my camcorder (it has a lable on the top that says EX on it)?
Or is it through the PCI card slot that is on the left side (that also says on it EX)?
Please help me?

i have good experience with Sony camcorder and I can recommend you to use firewire cable.
You are right this is this small DV interface. On your notebook there should be the same on the left notebook side.
It is the first port placed near the USB port.
Both devices have small 4 pin slot so buy right 4 to 4 pin cable.
When you connect the cam just switch it and it should be recognized automatically.
If you need more help let me know.

Satellite P500-193 - How to disable multimedia panel?

Hello!
I've just bought a Toshiba Satellite P500-193. It's great but I've got one problem. During online games and other games my hand sometimes 'click' on the multimedia panel and then the windows media player stars and game is minimazes to system tray :(
How can I temporary disable this panel? Picture of this panel: http://yfrog.com/87toshibasatellitep50002j

Hi buddy,
I have checked my Satellite P500 and it seems that you cant temporary disable these illumination buttons.
You can completely disable the illumination buttons in BIOS (BIOS setup > Advanced > System Configuration). There is an option called Function Button. You must set it to disabled.
But Im wondering about this problem, I dont have it while playing games. Alternative you can connect an external keyboard for playing games. :)

Satellite L450-188 - How to disable ACPI.sys and update BIOS?

Hi, hoping someone can help me with a slight problem i'm having
I recently bought a Satellite L450-188 (part number PSLY0E-03K019EN) running Windows 7 64bit
I use the laptop with a DJ program called Rane Serato Scratch Live, i've been having usb latency issues, getting usb dropouts when I try to use the program on its lowest audio buffer setting (which I expected to be able to do)
When I contacted the support team at Serato with my problem, they suggested I run a program to check the DPC times on my laptop, when I submitted the report to them, they said ACPI.sys was causing the issue, and suggested I might want to disable it, but i wasn't too confident with doing this.
The other suggestion was to try and find bios updates for my laptop, but I'm not too clued-up with this sort of thing, and I'm worried I might damage the laptop by maybe installing the wrong thing.
Can anyone give me any advice on this, as I'm not sure what to do
thanks
jim

Hi jimbob_1,
Normally ACPI means Advanced Configuration and Power Interface and controls some power saving options.
So if something is wrong with ACPI.sys file I would recommend reinstalling Windows using Toshiba recovery disk.
By the way: Are you running preinstalled Windows version or another one?
As Akuma wrote you can download BIOS update on Toshiba website. http://eu.computers.toshiba-europe.com/ > Support & Downloads > Download Drivers
Your notebook belongs to PSLY0E series, therefore you can download newest BIOS.
Before you start the BIOS update, close all running programs and extract all files from zip-archive. You start the update as Administrator and connect AC/DC adaptor. Make also sure that battery is fully charged.

How to disable Windows from prompting to enable Network Discovery

After deploying a new Windows 2012R2 VM, running sysprep, we then run powershell script to automatically configure a server how we want it.
One of these steps is to disable the Windows firewall in all profiles with this powershell line:
Set-NetFirewallProfile -name * -Enabled "false"
However, when I first login to the server, it prompt me to turn on/off network discovery:
"Do you want to find PCs, devices, and content on this network, and automatically connect to devices like printers and TVs?"
If I select "No", it enables the Windows Firewall on the public profile.
How do I prevent the server from prompting for this information?
I was thinking off disabling Network Discovery in the powershell script to turn it 'off' but not sure how to do this.
Thanks

Hi,
Did you try the command:
Disable-NetFirewallRule –DisplayName "Network Discovery"
https://technet.microsoft.com/en-us/library/jj554843.aspx
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to disable GUI from dispalying from CentOS to X server (XManager 3)

i have a RAC system installed and normally login to both boxes remotely using my laptop, at some point i wanted to install the listener using a GUI so i decided to use XManager3 but had problems connecting, so i decided to install the listener on the box itself but now i have a problem because when a run the netca command i get an error
Error:#
xlib: connection to "0.0" refused by server
Xlib: No protocol specified
java.lang.NullPointerException
at oracle.ewt.lwAWt.BufferedApplet.<init>(Unknown Source)
at oracle.net.ca.NetCA.<init>(Unknown Source)
at oracle.net.ca.NetCA.<init>(Unknown Source)
Oracle Net Services configuration failed. The exit code is -1
how can i disable X server on my host, because the problem is, when i run the netca command on my host (linux1) it is looking to display it on the X server whereas i just want it to display the GUI from the host console

oh my, another X question.
setup an X server on your local machine (like Xming) or use MAC or linux, and use ssh -X to tunnel X.
the ssh daemon will arrange the DISPLAY, no manual intervention is needed after logging in using ssh -X.

Satellite U300-152: How to disable Narrator from Ease of Access in Vista?

Similar Messages

Maybe you are looking for