Satellite U300-159 - Bluescreen after Windows 7 installation

Satellite U300-159. I made a clean installation of Windows 7 Home Premium 64bit. Since upgrading it has bluescreen at every startup after aprox 1 min. Bluescreen ***STOP: 0x000000f4. The computer restart it self after a moment.
I checked memory with 2 different programs. No errors. HDD checked - no errors.
Tried to update BIOS but get errorcode 1275 using Toshibe updateprogram.
Anybody have any ideas what to do?

Hey,
Im a little bit confused about your posting First you wrote that you made clean installation and then you wrote something about an upgrade
Whats true?
Anyway, do you notice the bluescreen in safe mode too? If not it seems to be a driver issue because in safe mode no drivers will be loaded.

Similar Messages

  • Satellite P300-1CE - Microphone doesn't work after Windows 7 installation

    Hi everyone.
    At the beginning I'm sorry for my bad english so I will say shortly.
    A few days ago I removed a few programs, and I installed the new operating system Windows 7. All over it I had to download new drivers of the camera, because they didn't work. After downloading drivers of the camera, the camera became operative (YEAH!), but later I worked out that for me a built-in microphone was out of order. What can be of it with cause and what driver to download and why microphone don't work?
    I can't speak with friends on skype ;( Help me. I hope you know what I say.

    Hello
    Did you really install all drivers after Windows 7 installation? Maybe you have forgotton something and so it doesnt work.
    Microphone is a part of webcam so make sure that webcam driver is installed properly and sound driver you need as well.
    After this check the sound settings. Make sure that Microphone is enabled and test it again with enabled microphone boost.

  • Satellite A300-1MX - Bluescreen after installation

    Hello
    I have a problem with Windows XP Installation. I set the Compatibility-Mode and everything goes.
    But at the end of Installation comes the blue screen, and windows stopped.
    "An important Thread for the OS is stopped unexpected"
    I loaded the drivers for SATA from Toshiba, but they dont work.
    I dont know what to do else, please help me.
    And please forgive me my bad English
    Grettings Infi38

    Hi!
    You must install the SATA drivers before you install Windows and if you have the SATA mode compatible you dont need SATA drivers but you lost a little bit performance.
    So I you want to reinstall Windows with AHCI mode, you must download the Storage Manager from Toshiba (http://eu.computers.toshiba-europe.com).
    Copy the driver on an external FDD and press F6 after the notebook started from CD or create your own installation disk with nLite (http://www.nliteos.com/).
    Bye

  • Suddenly Bluescreen and PC Shutdown (after windows 7 installation)

    dear reader
    I've installed one week ago the new windows 7 home premium on my Pavillion notebook dv 9040 ea. I've updated and installed all necessary drivers for each and every component afetrwards - at least this is what I believe that I've done with my knowledge. Updating through the device manager, with the help of hp support driver updates or manufacturer and I've also followed the great guide given from Daniel in this forum. Including registry cleaning and performance check (a 4,4 total evaluation). Everything seems to be perfect. BUT nearly every day now I've been using my laptop, teh screen all of a sudden turns to bluescreen! it appears a lot of white text on it and then my PC shuts down and starts again. Then it is aksing me, if I'd like to start in saved or in normal mode - the normal mode works afterwards.
    I've just taken a picture of the text on the bluescreen with my camera, because it turns itseld off so fast. So the main message here is that "[...] it is a driver problem and, in case it happens contiunuously, I shall disable and/ or remove recently installed hardware or software. [....] technical information: ***STOP: 0x0000009F (0x00000003, 0x869DB030, 0x82B3FAE0, 0x883DB690) [...] collecting data for crash dump...initializing disk for crash dump...beginning dump of physical memory...dumping physical memory to disk: 45"
    After starting windows in normal mode, a failure report is shown with the following details:
    Problemsignatur:
      Problem event name:    BlueScreen
      Systemversion:    6.1.7600.2.0.0.768.3
      Area Scheme-ID:    1031
    Additional information to this problem:
      BCCode:    9f
      BCP1:    00000003
      BCP2:    869DB030
      BCP3:    82B3FAE0
      BCP4:    883DB690
      OS Version:    6_1_7600
      Service Pack:    0_0
      Product:    768_1
    files that are helpful with the description of this problem:
      C:\Windows\Minidump\010110-26644-01.dmp
      C:\Users\Dani\AppData\Local\Temp\WER-48609-0.sysdata.xml
    Can anyone tell me the root cause for this error and how to get it solved please?
    Many thanks!!!

    Welcome to the Apple Support Communities
    You deleted OS X while you were installing Windows 7, but the most strange thing is that you only deleted the partition and you haven't installed Windows in it. When you have to install Windows, you only have to format the "BOOTCAMP" volume and then, install Windows in it.
    To reinstall OS X, follow these steps:
    1. Press Command, Option and R keys while your Mac is starting, and open Disk Utility.
    2. Select the hard disk at the top of the sidebar, go to Erase tab and erase the disk. You will delete Windows doing this.
    3. Close Disk Utility and reinstall OS X.
    4. After installing OS X, install Windows using Boot Camp, following the steps of this document > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

  • Re: Satellite L300 - Issues after Windows 7 installation

    Hi,
    I have a Toshiba Satellite L300 bought with Windows Vista 32bit approximately 4 months later I got out my Windows 7 64bit made it.
    1st My laptop has problems start after I installed drivers give it extra drivers to go but I've downloaded drivers for Windows 7 64bit
    2nd Whom do I hear music and wants to hear next song is it whom I use but ne net If the keyboards fn +?? do not go and play / pause next prevous Stop and media player tase funtionieren not only the silent weis tase of modest
    P.s. translate with google
    Thanks in advance
    Patrick

    Hi Patrick,
    To be honest your posting is very hard to understand and I dont know what you mean exactly.
    According your posting it seems that you need some driver and you can get all drivers here:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Regarding the FN keys you need Toshiba Value Added Package and Flash Cards Support Utility. Everything can be downloaded from official Toshiba page.

  • Re: Satellite L30D - Low screen resolution after Windows 7 installation

    I have installed Windows 7 on my Satellite L30D. Since this installation, I cannot have a better resolkuton than 1024x768.*It was much better with Windows Vista.
    I have downloaded the latest ATI driver. No effect. I cannot find the Catalyst Control Center as well. What can I do?

    Hi
    The Satellite L30D isnt known to me...
    Do you mean Satellite L30 or Satellite L300D?
    Normally you have to install the display driver if you want to use higher screen resolutions but check the specifications of your internal display first. Maybe the native screen resolution is 1024x768 and you cant use a higher one.
    You can download all drivers for your notebook on the Toshiba website!!! Dont use the drivers from ATI directly, they are not designed for mobile chips.

  • Satellite P35-S6112 - No sound after Windows 7 installation

    I installed Windows 7 on this Satellite P35-S6112 with a Realtek AC97 sound card in it. The card and drivers are working but there is no volume. I can hear sound with a headset very faint. I have uninstalled, reinstalled, attempted update but I have the current drivers installed.
    Troubleshooting has been done and system reports no issues. I am in desparate need of help here as my daughter needs this for her college as her other notebook is in the shop. Any help is greatly appreciated!!

    I have checked US support page and this old notebook is not supported for WIN7 so Im glad to hear you have installed Win7 successfully.
    If the sound card driver is installed properly I dont understand what do you mean with there is no volume. Can you use speakers symbol in task bar and change speakers sound level?
    Click also on speakers symbol and open Playback devices. Can you set Speakers to be default device?
    Which OS have you used before Win7 installation? Have you noticed the same problem?

  • Satellite P300 - Microphone doesn't work after Windows 7 installation

    Hi,
    I recently did a clean install of Windows 7 on my Satellite P300. The built in microphone was fine with Vista but does not now work with Windows 7.
    I've tried going to the sound section and it does not list the built in mike - just the jacks. Can anyone help?
    Thanks
    James

    Hi
    Maybe you didnt install the driver for the microphone?! Therefore you have to install the webcam driver because the microphone is a part of it. You can get it here:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    After this it should be possible to use the internal microphone.
    By the way: Which application you use for the internal microphone? Skype or something else?

  • Satellite A300 - After Windows 7 installation how to get factory sate back?

    I have recently installed windows 7 on my laptop and now I want to remove them and restore my computer to its factory state.
    When I enter the "advanced boot menu" I select "repair my computer", then there is a menu from which I select "repair...something". Then it shows up a message which says that there is nothing wrong with my computer and that's where all end.
    Any ideas???
    Thank you

    Hi
    Did you not create the Toshiba recovery disk as yet?
    I think you didnt read the user manual because there you can also find a lot of informations about this.
    The Toshiba recovery disk you can burn using the Toshiba recovery disk creator. This tool is preinstalled on every Toshiba notebook but on another OS like Windows 7 its not possible.
    Normally after the first start when you bought the notebook you get the following message (recovery reminder):
    +Important INFORMATION+
    +your system is equipped with hard disk recovery system. if you need to repair+
    +your computer by restoring it to original factory state, you can do it directly+
    +from harddisk (press F8 when you boot your computer, choose "Repair your computer"+
    +and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.+
    +Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator" to ensure+
    +hat you are able to restore your computer to the original factory installed state, even if your computer+
    +gets seriously damaged+
    However, now its too late and you have to order a new recovery disk from Toshiba directly:
    https://backupmedia.toshiba.eu/landing.aspx
    Bye

  • Satellite A350D - WLAN card disappeared after Windows 7 installation

    Hi folks.
    This is my first post on this forum, and it's not for a good reason.
    I have installed a brand new copy of Windows 7 32 bit, and after installing it, i have gone to Toshiba website and download the drivers for this version of SO. Everything looks great, except that the wireless LAN card drive don't works now. On the device manager nothing appears available. I don't have any error on Windows System Information.
    What is the problem? The wireless switch is on!! FN + F8 don't work. Help me!!
    [*Device Manager:*|http://img295.imageshack.us/img295/4649/systeminformation.jpg]
    [*System Information:*|http://img218.imageshack.us/img218/6196/devicemanager.jpg]

    Hi,
    Have you installed the Wlan driver?
    http://aps2.toshiba-tro.de/wlan/?page=downloads
    Download and install the driver for your model, while installing the driver enable the Wlan switch (if available) or pressing FN+F8

  • Satellite P100-429 - No sound after Windows 7 installation

    I have a Satellite P100-429 Purchased Nov 2006.
    I have just upgraded from XP to Windows 7 and Office Pro Plus. All works well but there is no sound if I try to play a CD. I have done usual checks for Mute etc. but no Joy. In device manager a yellow triangle with exclamation mark within is against my sound device. C
    an I download a new driver to solve problem or is it more complicated than that? Than you

    Hello
    For me it sounds like that you didnt install the sound driver for sound card
    According the Toshiba website there is no 64bit sound driver available for Satellite P100 but I noticed that Satellite P300 supports Windows 7 64bit and has Conexant sound card too. Maybe this driver is working for you too.
    Just search for Satellite P300 drivers and test the sound driver It should work! :)

  • Satellite Pro U200 - No sound after Windows 7 installation

    Hi,
    I'm having a problem with the sound after installing Windows 7 on a Satelite Pro U200 (PLUA1E). No Win7 sound driver found on the Nordic driver website. Please help.
    G.Magnason

    Hi buddy,
    Have you already checked the Toshiba website itself?
    http://eu.computers.toshiba-europe.com
    I found a sound driver for Vista 32bit and the most Vista drivers also work on Windows 7 so its worth a try!!! :)

  • Satellite A660-10W - After Windows 7 installation some unknown devices

    So I have the Satellite A660-10W, and I reinstalled the Windows 7 it came with Windows 7 ultimate 64bit. First thing is when I use fn+F6/F7 (other combinations work) for brightness levels it doesn`t work, brightness doesn`t change. And the other thing is that there seem to be some unknown devices.
    Here is everything hope someone can think of what could it be, thanks in advance. :)
    Link: [http://store.picbg.net/pubpic/B4/3E/3ca598fbde5fb43e.png]

    OK you and my friend are right, because I installed the video card drivers from nvidia`s website, not from toshiba, now brightness works :D
    And I reinstalled Windows because one thing there were no partitions only one lonely drive and I wanted 30-40gigs for windows and the rest for stuff, not when I decide do reinstall lets say a year later with work and media on it to lose everything. I didn`t do any back ups, even all the shop assistant talked about when I bought it was to buy some dvd`s and backup, but I said I never did that before so why would I need it now, anyway now everything works perfectly, iI`m prepared for the next time :D , thanks for the help. :)

  • Satellite A300-14S - After Windows 7 installation no modem recognized

    Hey guys, how are you?
    Unfortunately, I discovered today that Modem is installed with drivers on Windows Vista 32-bit but does not work. However, I formatted my PC and installed Windows 7 Ultimate 64-bit and: No modems at all! I don't know why device manager is unable to see and capture my device.
    I need help guys.
    Thank you.
    My laptop is: Toshiba Satellite A300-14S

    Hi dr.anm,
    Have you tried reinstalling the modem driver? I have checked the Toshiba website and there I can find a modem driver for Windows 7:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Check this!!!

  • Satellite A200-20H - No sound after Windows 7 installation

    Hey Guys.
    I have just bought this computer from a mate, and I have decided to install Windows 7 on the machine. Everything seemed to work brilliant, until I wanted to try and play some sound. There is no sound what so ever on the laptop, all the sliders are at max, I have tried pushing FN+ESC whit no difference. I have tried reinstalling and updating soundcard driver, no luck either.
    I found a "soloution" which said I should install Value Added package, and then run an app, which should unmute the PC, no luck there either..
    So I am starting to run out of ideas?
    So I am hopeing one of you clever guys in here has a soloution.
    If you need any info from the computer, just ask for them and i will reply whit them as soon as possible.
    Big thanks in advance
    Kim Jensen

    Well thx for the soloution, well an attempt to a soloution as the sound is still missing.. I did a total reinstall again.. I installed the Value pack as the article told me, and i ran the sound utillity program.. Still there is no sound..
    I have just tried putting some headphones in the computer, to see if sound would come out of those. That didn work either...
    Any ohter good ideas? =)

Maybe you are looking for