Satellite U400-22n and Win7 - screen hangs after 5 min

Hi, This is my first post
Ive purchased a new U400 with Vista preinstalled, last week ; 2 days ago Ive upgraded to windows 7 32bit professional when I stared Installing it windows prompted me that it requires a full installation , so I done a normal full install, windows 7 installed normally .
Now my screen hangs after 5 min and windows gos black and reboots after 3-5 min, Ive downloaded all the drivers from the Toshiba site Ive used the auto detect, and installed the drivers one by one and tested if the reboot stops , Ive reinstalled windows now 4-5 time returned my copy to the shop and got a new copy of the windows DVD, its the same,
Please has some one any advice for me. As the shop Ive perched this from will not upgrade to windows 7 for me.

hi Mather,
any bluescreens visible?
win7 32bit i guess...
you have to install all the drivers for win7 provided by toshiba in the right order!
first chipset and patchfiles if available...
i think a clean install will do the job!
make sure that the hdd is error free!
you can upgrade from vista 32bit to win7 32bit
but no chance to upgrade to a win7 64bit when a vista 32bit is installed...

Similar Messages

While trying to opening Video link in IE6 browser a white screen appears and the screen hangs.

Added a video as an internal link to a news article.
The flash player version we are using is 7.0.0.0. This video opens fine in all the browsers except for IE6 browser.
While trying to opening this link in IE6 browser a white screen appears and the screen hangs.
Please find the link below :
http://www.abnamroprivatebanking.com/global#global/au-news/global/14241
When we try to open any videos in the above link using IE6 browser white screen appears.
Could you please provide a solution as what can be done to resolve this issue.

if you're using an flvplayback component, you need to use fp 8 or better. or, use the netstream class with fp 7.

How do I remove Vista from Satellite U400 PSU44E and install Win XP

Because much of my specialist software is designed to work with XP pro I need to remove Vista Home Premium from my U400 and install XP Pro. As others have found with other Toshiba models simply placing XP disk in the DVD drive results in 'the dreaded blue screen' with error code 0X0000007B (0XF78D2524, etc etc) and comments about hard drive properly configured / check for viruses/run Chdsk/F to check for corruption.
Changing HDD BIOS from AHCI to compatability mode allows XP disk to load and run as far as 'Press enter to load XP' but pressing 'Enter' does nothing; pressing other keys has no effect either and the only way out I have found is to press and hold down the On/Off button. Also re changing from 'AHCI' to 'Compatability ' there are many comments on other Internet fora suggesting that using Compatability mode makes disk access much slower than the AHCI mode. However despite searching the Web using Tosh HDD Model Referencee No (MK3252GSX) I cannot find a XP ATA driver to nLite into XP before trying again.
Can anyone tell me a procedure they have used to strip off Vista and replace it with XP Pro on te U400 PSU44E please?

A friend of me has a Satellite U400 too. He installed Windows XP in AHCI mode and he doesnt have any problems.
As Juan28 posted you can integrate the drivers by using nLite. This tool is freeware and pretty easy to use. You need only the original Microsoft installation disk and the SATA drivers that you can download on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
If you dont want nLite you need an external FDD. After booting from CD you must press F6 to load the drivers from the FDD.
I prefer nLite because so I dont need an external FDD.
Furthermore I have read in the forum that the AHCI mode is a little bit faster as the compatible mode but in compatible mode you dont need any additional drivers for SATA.

Repeatedly getting stuck on spinning wheel and grey screen, even after multiple re-installs of the OS

Ok, so running Lion on a MacBook, (2010 i think) and the OS got corrupted(stuck on spinning wheel and grey screen on boot)
Tried to repair the disk via disk utility using an install CD, no go, couldn't repair, so, did a clean install.
New install went fine, computer worked for about 3 days and then stuck on the spinning wheel again.
suspecting physical damage to the harddrive, I installed the OS to an external, and booted from there. Worked for a couple days and then stuck on the spinning wheel.
I have repeated the process 5 times now, each time it works for a little and then craps out again.
What's going on?
as a note, when I say it gets stuck on the spinning wheel, I have left it for 12 hours trying to boot to no avail.

The Apple Hardware Test doesn't always detect all errors.
Next time you get the gray screen/spinning wheel, try booting into the Safe Mode to see if it will boot.
Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
Startup Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3)

HT4623 Terms and Conditions screen hangs when updating to iOS 8.0.2 on iPhone 5c

I have iOS 8.0 (12A365) on my iPhone 5c. The phone has 32 GB, 16 GB available.
Tried to update to iOS 8.0.2 over the network, but after touching "Agree" on the pop-up from the Terms and Conditions screen, the Settings app froze. The screen did not close, and everything on it became un-responsive. The home button still worked, and other apps still worked, but I had to reboot the phone to get back to a usable Settings app. I'll try updating via iTunes next. Meanwhile, has anyone else had this problem?

FWIW, updating via iTunes (11.4 on Windows 7) worked

Wallpaper and lock screen glitchy after updating to OS 4.0, using 3GS, help

can anyone help me? there seems to be issues with the wallpaper display and home screen, the display is glitchy with rows of off colored pixels...
how can i resolve anyone?
thanks

Hi,
I posted this post earlier today after upgrading this morning and finding I couldn't access a particular site. You may be having the same problem, it would be helpful to know if you are:
http://discussions.apple.com/thread.jspa?threadID=2481777&tstart=15
Basically I am trying to use a site that has an unregistered digital certificate. That might be the case with your campus login too. Often logins use a digital cert. to hide the password in transit, and often they use an unregistered one to avoid the cost of getting a real cert.
You can check this by using a laptop or something that won't crash and checking the certificate on the login screen by double-clicking the padlock icon in the bottom-right of the browser when it comes up.
Let me know if you don't mind, by replying to this, either way.
Thanks.

HT201177 I get a chime and white screen, but after a few minutes the screen goes black. Help!

I came out to a black computer screen. I can see the mouse arrow but otherwise nothing. I disconnected the computer and tried turning it back on. It starts up like usual but bar going across under the apple freezes and the screen goes black. I can hear the computer running. Help!

That's just the iPod's backlight timer going off, signaling the iPod's backlight to turn off to conserve battery power.
B-rock

Satellite A65 freezes and does not respond after adding of RAM

Gents,
My laptop Satellite A-65 has been upgrade from 512 MB RAM to 1024 RAM. It recognized additional memory without any problem (as it should be according to manual).
But unfortunately after 1 day it begun suddenly stops, pictures on screen freezes, laptop does not respond at all - only reset (pushing and holding power button) can help. some times laptop is able to work 2 or 3 hours, but then again stops.
Memory place cover is rather hot, fan very often work uninterruptibly. so i can't decide whether problem is in new memory card or not enough cooling or might be in changing of BIOS version (or BIOS setttings) and might be memory becomes full and does not clear itself properly (last remark was found on some forumes).
Experts, help to find exact reason especcially if u had similar problem.

Hi
Im not expert but I would recommend removing the new memory module and let run the notebook only with the standard memory module.
If the notebook will not hang and will not freeze then its a very clear case for me.
Either the second module is not compatible or faulty.
In my opinion you should use branded modules like Kingston for example. The quality is much better as a no-name module.
Additional use the modules recommend by Toshiba

Satellite L850-1HR and Win7- unable to Install Display Driver

Hello
I reinstalled my Toshiba Satellite L850 notebook with older Windows 7. I installed also all the drivers necessary. After I installed display driver in device manager under Display adapetrs I see message that adapter is not functioning properly because system is unable to load drivers.
On Win7 there is also SP1 installed. I cannot see why drivers are not loaded properly. Does anybody have any idea about what could be wrong ?
Thanks, Mateja

Hi
The Satellite L850-1HR is equipped with an ATI Radeon HD 7670M graphic chip
I assume the ATI driver is not installed properly.
On the Toshiba EU driver page especially in Satellite L850 PSKG8E download area I could not find the Win 7 AT driver.
But I checked drivers available for all L850 series and I found AMD display drivers.
You should do this too. Choose Satellite L850 series (in short model no choose All) in the driver download form and you will get all available drivers for Win 7 and Win 8
The AMD display drivers should be listed too.,.

IPAD video streaming screen hang after iOS 6.1 upgrade

I upgraded iOS 6.1 on my new iPad last night. I'm watching moving in you tube. After 2 hours screen locked with video screen. Complete iPad Hang. Power button did not reset the device. I have to connect power supply and then hold the power key to restart.

I upgraded iOS 6.1 on my new iPad last night. I'm watching movie in you tube. After 2 hours screen locked with video screen. Complete iPad Hang. Power button did not reset the device. I have to connect power supply and then hold the power key to restart.
In between video streaming struck up, I have to go to search library again to play back that video.

ITunes and other programs hang after starting...

Hello everyone,
Programs effected:
iPhoto
Adobe Acrobat
iTunes (Only when I open the iTunes Store)
Problem:
After about a minute, the program will hang and become unresponsive (pinwheel) but will not crash. I have to shutdown the program manually. The program will cause my CPU to max out until I force-quit it.
Any ideas for further diagnosis?
Thanks,
Jared

Nevermind! I rebooted my iPod and my computer recognized it! Whew!

Lock screen hangs after the installation of ios7 in my iphone4s

my iphone 4s hangs several times after the instalation of ios7. needs to be restarted several times in a day. plese give solutions

Hello RajPuth,
Thank you for using Apple Support Communities!
Since restarting the phone does not seem to be resolving the issue, I would next reset the phone.
Resetting your device
If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
From: iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup the phone to iTunes and before you restore your backup, I would test the performance of the phone and make sure that its ok. When it is, restore your backup and verify that it is still performing as expected.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Take care,
Sterling

Lost volume and mute screen graphic after various STB settings changes - how to get it back?

STB: QIP7232
Software Release 1.9
Build 10.95
Just got FIOS triple play installed yesterday. I am using STB to control TV volume (had to use remote code 9-5-5 to make that work - STB software settings alone did not work). I need to use the STB for volume because my older TV - SD Mitsubishi - cannot be controled via remote - its remote sensor no longer works. Initailly I had a graphic volume bar on screen - upper right quadrant - when changing Volume or using Mute from the remote - the graphic bar would disappear after about 10 seconds. After exploring and changing some of the STB settings, I noticed that the volume bar no longer displays at all. I'd like it back - but cannot figure out how to get it back. The graphic feedback helps me know that the STB received the command from the remote. The volume function from the remote is working - it is the graphic I am missing.
Does anyone know what STB setting might affect this? Or, is it possible to go back to "default" settings on the STB?
I tried calling Verizon - but they were not helpful - as long as volume control was working, they did not want to help me get the graphic back.
Anyone else encounter this? Thanks in advance...
Solved!
Go to Solution.

Thanks for your reply, but Volume Control was already set to Variable. And sorry for the delay in responding - I was trying to figure out if I could repeat (and even fix) the issue - now I have - tho there may be more than one way to do this:
To produce the problem on my setup:
1. While watching TV with no STB graphics on screen - check to see volume control graphic is there by hitting volume button on remote - wait until the graphic goes away.
2. On Remote, hit Favorites button (already set to "Toggle Flip by Favorites") - Info graphic (bottom 1/3 of screen) comes up indicating that I am in "Mode:Favorites 1".
3. On Remote, hit Guide Button
4. On Remote hit Exit Button
Volume / Mute graphic no longer appears when the buttons are pressed on the remote, tho the volume / mute functions do work. I can power off the STB - and still the volume / mute graphics are gone.
To fix:
1. On Remote, hit "On Demand" Button. (Wait for "loading" to finish)
2. On Remote, hit Exit.
Now the volume / mute graphic is visible again!
Hunh???
Is this a bug?
Note: remote is VZ P265v2 RC

Grey screen hang after 10.5.1 fixed, for now.

It looks like somehow 10.5.1 has broken the ability to boot my USB HD. Upon reboot, it would hang on the grey screen with spinner going. Verbose mode shows a bunch of reports of kernel dependency conflicts and journal errors. Here are some:
kernel[0]: jnl: unknown-dev: flushing fs disk buffer returned 0x5
kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
So, just for kicks, I removed the hard disk and installed it in one of my firewire 800 cases. Plug in, power on, booted right up no problem. Also no more kernel or journal errors either.
I tried restarting about 10 times in a row and it's working fine and is not spitting out the previous errors any more.
Hopefully this will stay working.

I have duplicated this issue. I was running 10.5 on a 500GB USB drive. I upgraded to 10.5.1 with no abnormal errors. On restart I get a grey screen with Apple and a spin underneath. No further boot. Let it go over night. I watched the verbose startup and it hangs just as mentioned above.
When I boot from my internal drive the USB drive mounts and is intact. I have run Disk Utility repairs and no problems have been found. I will try DiskWarrior also.
Unfortunately the drive is SATA and my firewire case is ATA/IDE. So I cannot test the drive as above. I will look into getting a FW case and post those results when I get them.
Any ideas as to a resolution would be appreciated.
Rick

Ibook G4, OSX 10.4 and blue screen/hangs

My wife's ibook is acting very erractic. While using it today, it locked up and would only proceed to a blue screen upon reboot. I finally got it to start using my install disk to run disk repair. After running it twice, I finally got it to reboot. Ran Disk repair again. Now it will book and you can log in but when the system is inactive for about five minutes, you get a black screen. If you close the laptop, it has a blue screen when reopened. My questions are is this likely to be a hardware or software problem? I believe that it is a software problem but I would rather not do a full re-install. Any advice would be appreciated.

Hi Jeffery, it actually sounds like a hardware problem.
http://www.macintouch.com/readerreports/ibook/topic3417.html
http://www.applefritter.com/node/10193
I believe that it is a software problem but I would rather not do a full re-install.
If so, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

Satellite U400-22n and Win7 - screen hangs after 5 min

Similar Messages

Maybe you are looking for