Satellite U400 does not wake up after I closed the lid

When I want to do something like go out then I close the Lid and then I can't get the laptop to wake up again, I have tried some stuff but nothing seem to work.
I don??t use Toshiba Power Save, I use the usual-normal XP energy and I even tried with Toshiba Power saver but not the software only from Start> Control Panel > but still the laptop does not wake up after I closed the Lid down.
Anyone that can help me with this issue?
thnx.

These are good news but could you please post a short instruction how you have solved this? I think it would be interesting for other users here in the forum!

Similar Messages

  • T400 does NOT wake up after going to sleep

    T400 does not wake up after going into sleep. It goes to sleep ok but everytime wheni try to wake it, it restart the whole system instead of waking up.
    I have checked the BIOS Security setting and it already set on Active. All drivers are upto date.
    Please help!!
    Message Edited by farooqjilani on 03-09-2009 08:23 AM

    I have a similar issue with a T400 (xp sp2).
    suddenly, it won´t come back from sleep.  i have to press & hold the power button to turn off the computer, and then press again to turn it on from scratch.

  • HT1339 My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

    My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

    Time to replace it: $49 2nd Gen shuffle at online Apple Store...

  • I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

    I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

    It is hard to exactly understand what you have  done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
    Updating a Chart Copied from a Numbers Document
    If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
       Select the chart on the page and click the Refresh button that appears.
    Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
    I hope it has helped you.

  • MacBook wont wake up after I open the lid

    It has been a persisting (and boring) issue. My MacBook wont wake up after I open the lid. I try closing and opening it lots of times but the screen stays black - it doesnt display the user login screen. Anyone has ever experienced this kind of issue, knows what causes it or has a fix for this bug?

    Try resetting the SMC:
    http://support.apple.com/kb/HT3964

  • G4 HiRes Powerbook shuts down after having closed the lid

    I own a less then 6 months old 15" 1.67 GHz HiRes Alu Powerbook. Every now and, after having closed the lid, I have observed that when I reopen the pb it has shut down. The battery is still fully charged, so it can't be the case that the pb has not gone to sleep and it has thus discharged the battery. I also think it has happend with both the power adapter connected and disconnected.
    In the past I deleted power managment pref files (can't remember the details) as advised by Apple in their tech papers, which resolved sleeping problems (not mine though :-))
    All tips appreciated.
    Thanks, Robert
    Powerbook 15" HiRes   Mac OS X (10.4.6)   Powerbook 15" 1.67
      Mac OS X (10.4.6)   Powerbook 15" 1.67
      Mac OS X (10.4.6)  

    Occasionally with mine, it only appears to have shut down.
    I close the lid, and there is no pulsing light. the light is off as though its shutdown.
    then if I open the lid, hit a key or two, wait, then close it again, and wait, the pulsing light will appear and if I then open it, it will wake from sleep.
    Weird, but you might give it a go. This seems to happen often when running video-related applications, but I have no real data here and do not know what causes it. After I discovered this problem, I use it now to prevent having to lose my work and restart.

  • L655D stopped working after I closed the lid

    Usually, when I close the lid, the laptop just goes to sleep.  This time, I closed the lid, left for 20 minutes, came back, opened the lid, and saw a black screen.  The computer did not respond to the touchpad, power button or keyboard until I pressed and held down the power button until the computer shut down.
    Ever since then, I can't get the computer to turn on properly.  I've already tried (numerous times) removing the AC power cord and battery, holding down the power button for more than a minute, reconnect one or more power sources (battery and power cord), etc.
    Hitting F2 doesn't work.  I don't even see a faint image of anything on the screen, so it's not a backlight issue.  I even created a USB and a DVD boot and that did not work.
    Each time I turn on the computer, this happens:
    1. One of the blue LED lights (possibly the power) comes on.
    2. The cooling fan comes on.
    3. The CD/DVD multidrive whirls for about a second if the drive is empty.  When a Windows 7 boot disc is in the drive, the computer tries to read the disk (whirls and pauses) for many seconds and then finally stops.
    PLEASE help.  Thanks.

    OK.  After almost 10 years of buying Toshiba laptops (3), I am going back to Dell.  Just ordered one from buy.com.
    I don't want to deal with problems with AC adapters and jacks, the computer not starting up, etc., anymore.  Life's too short.

  • Display of Satellite A200 does not switch on after 15 min inactivity!

    Hello!
    I have just purchased a Satellite A200 1-AX PSA6 and install Windows XP SP2 + upgrade bios for winxp.
    After 15 munutes of unactivirty (not pressing any keys or mouse move) I'm set in Power options in control panel - what Display must power OFF.
    After this time display is switches off (black)!
    But I'm can't wake up my notebook!
    I'm press any key or move mouse, but display is still black!
    But notebook work!
    I can ping then by network or connect by remote acceess!
    One way to solve this problem:
    Close and open notebook!
    A200 - in sleep mode and wake up with swithches ON display....

    Hello
    It seems that WXP does not work perfectly on new Vista designed notebooks. Before you live your notebook try to change profile in power settings (long battery life) and test the settings with this profile.
    Tomorrow I will try to install WXP on my A200 and I am really interesting if I will notice the same.

  • IMac (Mid 2011) Does not wake up after long sleep

    Hi People,
    Having issues with my Mid2011 iMac (21,5", 2.7GHz). Just upgraded to 12GB RAM (2x2GB original + 2x4GB). System runs fine, no issues.
    But when system goes to sleep for a longer period (a few hours) it will not wake up again. Neither by Keyboard/Mouse interaction (Bluetooth as well as USB) nor by pushing the powerbutton. I also performed the PRAM and SMC reset as described in the apple support resources.
    Feeling a bit lost. Any Ideas?
    Thanks in advance for any help!

    Addition:
    Performed a test of the RAM with memtest. No erros found. Also forget to mention that the Mac has also Software updates and firmware updates installed.

  • Satellite A30 does not come back after hibernation.

    If I don't touch the keys for 10 mins or so my laptop goes into hibernation. It will normally come back when I touch a key or the touch pad but sometimes nothing I do can get it back. I have to turn it off and then back on again. I was wondering if anyone had any ideas?
    I looked at the power management and I can turn off all hibernation but I like it to hibernate when I close the lid so is there any way to make it so it ONLY hibernates when I close the lid and at no other time?

    HI Clare,
    In the Toshiba Power Management utility you should click on the 'advanced' tab and about half way down the resultant window you should see an option for the action to be taken when you close the lid of your SA30.
    Make sure that this is set to 'hibernate'. Then go to the power save modes and click on the 'details' tab and then the 'Power Save Mode' tab and make sure that the 'Hibernate' option is set to 'never'.
    With these settings your notebook should go into 'hibernate' when you close the lid but not at any other time.
    Note that you can set the notebook to hibernate when running on battery when the bttery capacity reaches a pre-set value of your own choosing.
    regards,

  • How do I send text messages from my Ipod touch?  The "send" button does not light up after typing in the message.

    How do I send text messages from my Ipod touch?  The "send" button does not light up.

    First of all, you need you have at least iOS 5 installed. Second, the person you are texting must have an iDevice with iOS 5 or higher installed. You can´t send messages to an non-iDevice. You´ll also need an Wi-Fi network to send iMessages. Hope it helped!
    Message was edited by: AppleTechTalk1100

  • W520 cannot turn on after hibernation (closing the lid)

    When I close my W520's lid and it goes into hibernation, it sometimes cannot turn on again. 
    The power button will be lit and when i press it, the thinklight flashes but the computer will not boot. It will repeat this process continously for a few times. 
    Also, I notice that the first two LED indicators on the cover will be lit. 
    Is anyone able to advice me on this? Should I send it for servicing? 

    Are you sure it goes into hibernation? By default it goes to sleep when you close the lid.

  • My Mac Pro (8-core) does not wake up after sleep

    The most times my mac pro goes to sleep he won't wake up on hitting the keyboard or the power button. There is some noise as if the harddisc is waking up but the screen stays dark and the power light which first lightens up and down like in sleep modus is fully lightened. I have to make an improper shutdown.
    Diagnostic message is
    12.01.10 15:37:34 configd[15] Sleep: Platform Failure - AC
    com.apple.message.domain: com.apple.powermanagement.sleep
    com.apple.message.signature: Platform Failure
    com.apple.message.result: Failure
    com.apple.message.uuid: 171DDEB4-6C08-40FB-8F8D-9E0BA393A033
    System log says:
    Jan 12 02:46:21 ises-MacPro loginwindow[44]: loginwindow SleepWakeCallback WILL sleep
    Jan 12 06:33:57 localhost com.apple.launchd[1]: * launchd[1] has started up. *
    Jan 12 06:34:01 localhost DirectoryService[11]: Improper shutdown detected
    Jan 12 06:34:12 localhost mDNSResponder[17]: mDNSResponder mDNSResponder-214.0.2 (Dec 15 2009 16:58:04) starting
    Jan 12 06:34:12 localhost pcscd[30]: Non-smartcard device launched pcscd [Vendor: 0X2040, Product: 0X9580]
    Jan 12 06:34:12 localhost configd[15]: Sleep: Platform Failure - AC
    Jan 12 06:34:13 localhost configd[15]: network configuration changed.
    Has anyone an idea what can be the cause for this behaviour?
    Thanks a lot
    Marie-Luise

    Yesterday when I started up my Mac Pro I noticed that it sure seemed loud. I normally never shut it off, so I hadn't noticed that it was getting pretty loud. Then, for the first time since I've been having the wake up problem, it went to sleep as I was surfing the web. This time instead of just shutting it off and restarting, I decided to reset the SMC. I then figured since I had everything disconnected I'd take a look at the GPU and clean the dust out of it. After vacuuming, being real careful to not fry anything with static, I put it into a different slot than before. Plugged everything back in and started it up. First thing I noticed was the volume of the GPU fan was much quieter than it has ever been, no joke. I haven't shut it off in almost 24 hours and it hasn't gone to sleep at all. I've read other posts on the net that claimed the SMC reset and moving the card to a different slot didn't fix the problem for very long, so I'm hoping that isn't what fixed it. I'm hoping it was just dirty, as I have already had to replace 2 GPU's in 2 years and I can find many other things to spend money on. Now more than ever since the only card I'd want that Apple offers is $460. I hope this helps you, and me for that matter.

  • Monitor does not wake up after powersave

    Inside my app (Full screen mode) I use PostMessage
    (HWND_BROADCAST,
    WM_SYSCOMMAND,
    SC_MONITORPOWER, (LPARAM) 2); to turn off the monitor. However, when I use
    PostMessage (HWND_BROADCAST,
    WM_SYSCOMMAND,
    SC_MONITORPOWER, (LPARAM) -1); (along with a mouse_event) it is not waking up
    the monitor.   
    I use 2 monitors connected to GPU, Windows  8, directx9. Furthermore, I see that after sending the command to wake up the monitor (monitor still shows black) IDirect3DSwapCain9* is Null.

    This forum is for Windows Embedded POSReady/WEI. You should post your question to the Visual Studio forum:
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio
    www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

  • After updating aurora/firefox to most updated versions i find the mcafee site advisor does not work , but after rolling back the versions it does .

    .....

    Most security software only supports the current release and even that can take some time after Firefox has been updated.<br />
    If you expect Firefox to work properly all the time then you should stay with the release version and to use nightly builds that are updated every day or weekly in the case of the Beta channel.
    *http://www.mozilla.org/en-US/firefox/channel/

Maybe you are looking for