Satellite U400 - error - Bluetooth has not started

I have used my u400 for 3 months without problem...
Then suddenly several problems with bluetooth occured...
When I wanted to use BT for example OBEX, I got error msg: "Bluetooth has not started".
I tried to reinstall driver for bt, but I couldn't. I got this error msg: "Please insert BT stack". So I decided to reinstall windows vista with recovery disk. On fresh install of vista, there were no bt drivers pre-installed. So I installed drivers and everything was fine for 2 days..
Now bluetooth is not working again.. can NOT reinstall drivers becouse of error msg again (Please insert BT stack) (Of course, the wifi switch is turned on).. The interesting thing is that in device manager is no BT hardware...
Any ideas?

Hi buddy
Ive got a U400 too and I never had any BT issues
I updated the BIOS to the latest state
Did you do this too?
If not you could try to update the BIOS
Furthermore I recommend enabling the BT using the FN+F8 key combination
Using this buttons you can enable and disable the Bluetooth and WLan
Check it!

Similar Messages

  • When I plug my iPod in, iTunes tells me it has not started??? help

    I'm trying to sync music but an iTunes message pops up indicating that my iPod has not started.

    What is the exact wording of the error message?

  • My iphone will not sync to my computer saying the apple mobile device has not started

    my iphone has not had problems with syncing to my computer. but when trying to sync today it wont. and my computer gives me a message that the phone cannot be used because the apple mobile device has not started. help?

    Type "apple mobile device service" into the search bar at the top of this page by "Support" and read the resulting help articles.

  • How can I connect my touch to iTunes since it says "Apple Mobile Device has not started"?

    My touch is not connecting to iTunes, i just bought mine yesterday too so it is brand new! I connected it to iTunes and it said apple mobile device has not started.. Help please!

    See Here
    AMDS for Mac
    http://support.apple.com/kb/ht1747
    AMDS for Windows
    http://support.apple.com/kb/TS1567

  • HT1386 when i plug my iphone to my computer it says, apple mobile device has not started. why?

    when i plug my iphone to my computer it says, apple mobile device has not started. why?

    Your computer could possibly be running in selective startup mode where any nonessential services are disabled temporarily until a restart.  If that isn't the case you can check out http://support.apple.com/kb/TS1567 for information on restarting the Apple Mobile Device Service (AMDS) on Windows computers. 

  • SMQ2 Error: Delivery has not yet been put away / picked (completely) in ECC

    Hi All,
    I am processing an Outbound Scenario..everything is fine until SMQ2 shows an error in ECC system. SMQ2 shows me the following error:
    Delivery has not yet been put away / picked (completely)
    Message no. VL609
    My outbound delivery which was distributed to EWM system has overall picking status as blank (Not relevant for picking).
    Our system is recently upgraded to EhP6, since then we are seeing this issue. Interestingly VL01NO (Delivery without reference to Order) works properly.
    Other ECC-EWM integration settings are fine. Delivery Type and Item Category also look good.
    I could not be able to find any OSS Note relevant to this situation.
    Could you anyone help me.
    Thanks
    Mahesh.

    Further what I see in this Outbound Scenario in EWM is when I am creating Outbound Delivery meant for EWM system with ref. to Sales Order, "Picking" tab shows EWM WHN but also shows Overall WM status as "Transfer Order Required" which is not correct.
    If I remove Storage Location and re-enter then Over all WM status and Over all Picking status fields come as blank. But after all EWM processing, SMQ2 queue (FM: BAPI_OUTB_DELIVERY_CONFIRM_DEC) fails with error
    Delivery has not yet been put away / picked (completely)
    Message no. VL609.
    Any thoughts?
    Thanks
    Mahesh

  • Error HRWPC_FC_EXEC - could not start transaction

    Hi, am getting error when access MSS ePortal a particular transaction give me the error HRWPC_FC_EXEC - could not start transaction, and other transactions are working fine. Any one pls advise how to check and we miss anything? 
    thanks in advance.
    Regds

    Hello,
    Please set parameter  ~webgui_theme with value "sl" in the HRWPC_FC_EXEC service under GUI configuration. That you will find in the interactive options of service data.  After saving this service please also run the transaction SITSPMON -> Templates and Mimes -> go to "Invalidate cache" and select System wide/Application server.
    Hope it helps,
    Christine

  • The ipod could not be synced because the sync session has not started

    when i'm connecting the ipod to my computer the message '' the ipod could not be synced because the sync session has not started ''     !!!
    why ?
    and what can I do ???

    See:
    https://discussions.apple.com/thread/3415227?start=0&tstart=0
    https://discussions.apple.com/message/16400530#16400530

  • When I connect my iPhone 4S to my MacBook Pro, the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started". What does that mean?

    Hello,
    When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
    What does that mean?
    Thanks in advance for fixing my problem.

    I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
    EDIT: Here, this might help: http://support.apple.com/kb/ts1567

  • When i try syncing my phone a alert message pops up saying "this iphone cannot be used because the apple moblie device service has not started" what do i do?

    when i try syncing my phone a alert message pops up saying "this iphone cannot be used because the apple moblie device service has not started" what do i do?

    Read here:
    http://support.apple.com/kb/TS1567

  • When i try syncing my phone a alert message pops up saying "this iphone cannot be used because the apple moblie device serivce has not started" what do i do?

    when i try syncing my phone a alert message pops up saying "this iphone cannot be used because the apple moblie device serivce has not started" what do i do?

    Read here:
    http://support.apple.com/kb/TS1567

  • I got this error: following error: Warning: Can not start service RTCMEDIARELAY on computer

    I am installing an edge server, when I start the services, enter the following error:
    Warning: Can not start service RTCMEDIARELAY on computer. and only start two services,
    Lync Rerver Replica Replicator agent and Lync Server Web Conferencing Edge.
    my lync server is version 2010.
    If you need more details, do it know.
    Greetings.

    Here are some similar threads you can refer to:
    http://social.technet.microsoft.com/Forums/lync/en-US/2db2ef0b-7d4f-4908-a0c5-d5de5822d9cf/edge-server-services-not-starting
    http://social.technet.microsoft.com/Forums/lync/en-US/1544fd15-5a60-47f0-9793-c68d6db030d6/warning-cannot-start-service-rtcmediarelay
    Lisa Zheng
    TechNet Community Support

  • MINIWAS Error: Database BSP NOT started

    Please i need help . when initializing the data base this is the error:
    C:\MiniWAS>dbmcli -U c db_warm
    ERR
    -24988,ERR_SQL: sql error
    -902,Message not available
    Error: Database BSP NOT started !
    Thanks
    when star SAP MBS this message:
    C:\MiniWAS>REM =====================================================
    C:\MiniWAS>REM   Set the Environment for the DB Connect
    C:\MiniWAS>REM =====================================================
    C:\MiniWAS>set DBMS_TYPE=ada
    C:\MiniWAS>set PATH=C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\syste
    m32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\ASRAPI2\BIN;C:\sapdb\programs\bin;C:\
    sapdb\programs\sap;C:\sapdb\programs\pgm
    C:\MiniWAS>REM =====================================================
    C:\MiniWAS>REM   Start the Database (SAP-DB)
    C:\MiniWAS>REM =====================================================
    C:\MiniWAS>cmd /c strdbsBSP.cmd
    Iniciando base de datos
    C:\MiniWAS>set DBNAME=BSP
    C:\MiniWAS>x_server
    18641 ERROR: XSERVER is already running!
    C:\MiniWAS>dbmcli -U c db_warm
    ERR
    -24988,ERR_SQL: sql error
    -902,Message not available
    Error: Database BSP NOT started !
    C:\MiniWAS>REM =====================================================
    C:\MiniWAS>REM   Start SAP System
    C:\MiniWAS>REM =====================================================
    C:\MiniWAS>rem del pxastat
    C:\MiniWAS>start /B msg_server.exe pf=BSP_D00.pfl
    C:\MiniWAS>disp+work.exe break pf=BSP_D00.pfl
    dp Ctrl-C enabled
    rslgwr1(21): Searching for overlap point in pre-existing SysLog file...
    maximum pfclock time: 4294sec (1)
    gw Ctrl-C enabled
    dp Ctrl-C enabled
    dp Ctrl-C enabled
    dp Ctrl-C enabled
    maximum pfclock time: 4294sec (1)
    maximum pfclock time: 4294sec (1)
    maximum pfclock time: 4294sec (1)
    maximum pfclock time: 4294sec (1)
    adjust_clock: delta 518
    adjust_clock: delta 504
    adjust_clock: delta 1500
    work process W1 died => tskh_init: db_connect
    work process W2 died => tskh_init: db_connect
    work process W0 died => tskh_init: db_connect
    WARNING => pfclock may be badly adjusted (518)
    IcmHandleArgs: Illegal option break
    ICM up and operational (pid: 1508) ***
    DISPATCHER EMERGENCY SHUTDOWN => DpEnvCheck: no more work processes
    Shutdown ICM server ....
    ICM shutdown completed (pid: 1508) ***

    Hi,
    there must be some more information in the file named 'knldiag' or 'knldiag.err' file. Can you please copy and paste some information from either of those files into this thread?
    Additionally, please mention your exact MaxDB/SAP DB Version (incl. Build).
    I also noticed you've set the date of your system to the year 2020???
    Regards,
    Roland

  • My Ipad will not connect with Itunes prompt states this Ipad cannot connect because the Apple mobile device service has not started "??s "This Ipad cannot connect

    my Ipad will not connect with Itunes prompt states this Ipad cannot connect because the Apple mobile device service has not started "??s "

    Try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

  • Bluetooth does not start at Satellite L850-BJS when Flash Cards installed

    With installed Toshiba flash cards Bluetooth is not working, when I delete all works.

    I installed in this sequence:
    Bluetooth Filter Driver Package Realtek Semiconductor Corporation 2.3.9.0211.2012, then Bluetooth Stack 9.00.00T, then USB Driver AMD Windows 7 - 64 Bit 1.0.0.72, then Display Driver AMD Windows 7 - 64Bit 8.942-120213a-133550, then Wireless Lan Driver Realtek Semiconductor Corporation Windows 7 - 64Bit 2.00.0020, then Value Added Package Toshiba Windows 7 - 64 Bit 1.6.0023.640204 .
    But BT does not work with instaled flash cards

Maybe you are looking for