Satellite U400 Impossible to create recovery DVD with Recovery disc creator

Hi,
I have a Satellite U400 (few years old), and I never created the recovery DVD.
Now I want to do it, but for some reasons, when I launch Toshiba recovery disc creator, nothing happens...
The partition with the recovery files is there, as well as the folder HDDRecovery. I did add some files to this partition, could this be the problem ?
Thanks for your help.

It is big problem now if the Toshiba tool cannot find the files.
How it works you can read on http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=140985
Check it out please.
What you can try now is to check if HDD recovery installation will start - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm but Im afraid the same problem will occurs again.
To be honest you should install Win7 32bit on this small Satellite notebook. It works perfectly. Forget original Vista OS, Win7 works better.

Similar Messages

How to recover ge620 from recovery dvd with corrupted recovery partition

i bought recently an ge620 and create recovery dvd with msi software (2 dvd)
i want to repartition its 750 hdd with third party software and now recovery partition and the whole system have trouble and system not booting atall.
the recovery partition is corrupted now and i have not the original win7 dvd especially product key to reinstal this x64 os .the drivers can be downloaded from oficial site.
i try to recover laptop from revovery dvd(press f3 or f11 inserting dvd but it read dvdrom and everything is ok until system try to read corrupted recovery partition and process fails )
plz help me how can i recovery this laptop with recovery dvd by FORCE the system to recover from dvd not recovery partition
thank you

See this FAQ:
https://forum-en.msi.com/faq/article/how-to-recover-your-notebook
Select 'Fail-safe' option to recover from DVD, this will wipe all existing partitions and restore the notebook as you purchased it (all data will be destroyed).

After creating a DVD with music, the pictures all come out fuzzy and not sharp. Why

After creating a DVD with music, the pictures all come out fuzzy and not sharp. I have tried all the options, and nothing works, they all come out fuzzy. I have wasted about a dozen DVD's

Have you tried enhancing and sharpening in Premiere Elements before burning to disk?
What steps are you doing exactly?

How do I create a DVD with no theme, i.e., it plays what was recorded when inserted in the player?

How do I create a DVD with no theme, i.e., it plays what was recorded when inserted in the player? Nothing extra, just the recorded content.

Hi
No Menu on DVD
from. Mishmunken
How to create a DVD in iDVD6 without menu (there are several options)
1. Easy. Drop your iMovie in the auto-play box in iDVD's Map View, then set your auto-play item (your movie) to loop continuously.
Disadvantage. The DVD plays until you hit stop on the remote
2. Still easy. If you don't want your (auto-play) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the drop-zone (text needs to be black as well).
Disadvantage. The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
3. Still quite easy but takes more time. Export the iMovie to DV tape, and then re-import using One-Step DVD.
Disadvantage. One-Step DVD creation has been known to be not 100% reliable.
4. (My preferred method) Easy enough but needs 3rd party software. Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn.
Disadvantage. you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
5. The "hard way". Post-production with myDVDedit (free-ware)
Tools necessary. myDVDedit ( www.mydvdedit.com )
• create a disc image of your iDVD project, then double-click to mount it.
• Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
• Set permissions to "read & write" and include all enclosed items; Ignore the warning.
• Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
• Select the menu (usually named VTS Menu) and delete it
• Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned. If it works save and close myDVDedit.
• Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager.
//lonestar.utsa.edu/llee/applescript/dvdimager.html
hope this helps!
From LynnLU USA
www.mediasoftmac.com/dvd-creator-articles/convert-mov-video-to-dvd-on-mac.html#1 29
Yours Bengt W

Using IDVD to create a DVD with HDV footage edit in Final Cut

I tried to create a DVD with IDVD 5. It was a 5 minute hdv movie edited in Final Cut and the result was really bad.
I have tried the best quality option but it's still a disaster. I taught about using compressor but It would take 110 hours to compress this movie in h:264
What is my solution?

I have tried the best quality option but it's still a disaster.
Try best performance.

Create a DVD with footage that is shot in 16:9, 4:3 as well as 1920x1080 photos too?

I need to create a DVD with footage that is shot in 16:9, 4:3 as well as photographs too (and I'd like the photos to be at 1920x1080 as the DVD will be shown on a full HD tv)
Am I right in thinking I can setup a project in PE3 with widescreen settings, and then crop my images to 1920x1080 as well as using the video footage (which is 640x356 and 640x480)
I want the best quality images, hence I'd like the pics @ 1920x1080
Any advice appreciated

You'll get the best quality if you reduce the size of those images, believe it or not. It has to do with the way to program must downsize all images to fit in a 720x480 non-square pixel space.
You should open a widescreen DV project and add to it photos that have been sized to 480 pixels tall (or 855 pixels wide if you want them to fill the screen but lose some of the tops and bottoms of the pictures) as well as your other standard DV. This will create a standard DV project -- which is what I assume you want, since you're creating a DVD.
If, on the other hand, you're creating a BluRay disc, those measurements would be different -- although if you're not using hi-def source video, you will get hi-def video regardless.

Problem FCP6. It is impossible to create multicamera clip with DV and HDV.

Problem FCP6. It is impossible to create multicamera clip with DV and HDV. I wish to create the multicamera clip from files dv and hdv. But the program informs that it is impossible because the different size frame. Video dv and hdv in the multicamera are incompatible? (Excuse for possible errors in the text)

Ken Summerall, Jr. wrote:
Do I need to export this as a movie before I can use it to be allowed to Multiclip with the DV footage?
How else are you going to use it?
I thought somehow there was a way to use the sequence itself into the multiclip.
Like a nested sequence used as a clip.
Thanks for your help.

How create 1 dvd with 2 file

how create 1 dvd with 2 file

As you probably know, DVD creation in Compressor and FCPX is very limited – and it only accommodates single tracks.
But there is no reason why you can't put multiple movies on a single timeline in FCP. Separate them with inserted gaps and add chapter markers to provide some level of navigation among them.
Good luck.
Russ

Satellite Pro L850-1UJ: How create recovery DVDs from recovery partition

I recently bought a Satellite Pro L850-1UJ with Windows 8
http://www.toshiba.co.uk/laptops/satellite-pro/l850/satellite-pro-l850-1uj/
I've created a new partition (so i could use it as data room)
i.e. C: the windows system AND Z: my data
after that, i could NOT use the RECOVERY MEDIA CREATOR to create the recovery dvds
BUT the partition still exists and i can see the inside files from windows
IS IT a way to extract the files from the recovery partition or any other clue how i could fix the partition scheme so the RECOVERY MEDIA CREATOR could recognize it
Many thanks for your time...

>I've created a new partition (so i could use it as data room)
This was a mistake
The HDD partition table has been modified and changed which means that the Toshiba recover media creator would not find the essential files in order to create the Recovery disk or recovery USB flash memory stick.
What you could try to do is to reset the notebook back to factory settings.
For this you can use the option called Reset your PC.
Details here:
http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
After that the partition table should be set to the same state like at the first day of purchase and you could try to create the recovery disk once again.
Otherwise if this does not help you, the recovery disk could be ordered as mentioned by user xaver

Should I get recovery DVD with brand new Satellite A300-16I?

Hi,
Does anyone know if a windows Vista DVD should have been included in the box? If not how do I receive a copy?
Thanks for your help.
Martijn

Hello
As far as I know all new Toshiba notebooks are delivered with HDD recovery image. That means there is no recovery media anymore. When you start your notebook model you will see a reminder about creating recovery DVD.
Can you find on the desktop shortcut for Toshiba Recovery Disc Creator? If yes please start it and create recovery DVD.
Can you find HDD Recovery folder on second partition? Please do not delete it.

How can I create a dvd with NO theme?

I'd like to create a DVD that shows an image of my choice when inserted in player, with one play button start movie. All themes seem to have some moving graphic or fancy stuff.

Hi
Easy is to put movie into AutoPlay box in organizing view in iDVD window (top left most box)
But this ends in a menu - This can be a black photo to simulate No Menu
All themes seem to have some moving graphic or fancy stuff.
No - and especially the old ones. AND by using the mid round button under the iDVD menu window (the one with two semi-circular arrows) You turn off Animation - I always do !
from. Klaus1 in Somerset, UK
How to create a DVD in iDVD6 without menu (there are several options)
1. Easy. Drop your iMovie in the autoplay box in iDVD's Map View, then set your autoplay item (your movie) to loop continously.
Disadvantage. The DVD plays until you hit stop on the remote
2. Still easy. If you don't want your (autoplay) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the dropzone (text needs to be black as well).
Disadvantage. The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
3. Still quite easy but takes more time. Export the iMovie to DV tape, and then re-import using One-Step DVD.
Disadvantage. One-Step DVD creation has been known to be not 100% reliable.
4. (My preferred method) Easy enough but needs 3rd party software. Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn.
Disadvantage. you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
5. The "hard way". Postproduction with myDVDedit (freeware)
Tools necessary. myDVDedit ( www.mydvdedit.com )
• create a disc image of your iDVD project, then double-click to mount it.
• Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
• Set permissions to "read & write" and include all enclosed items; Ignore the warning.
• Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
• Select the menu (usually named VTS Menu) and delete it
• Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned.If it works save and close myDVDedit.
• Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager.
//lonestar.utsa.edu/llee/applescript/dvdimager.html
hope this helps!
From LynnLU USA
www.mediasoftmac.com/dvd-creator-articles/convert-mov-video-to-dvd-on-mac.html#1 29
Yours Bengt W

How to Create a DVD With No Menu?

hi there.
i've had DVD Studio Pro for a while and never used it.
would it be to hard to give me a step-by-step guidance on how to create a DVD from a QuickTime file in DVD Studio Pro (initially, in the form of a VIDEO_TS folder or IMG file) with no menus at all, so that it's played straight away once inserted into a stand-alone DVD player?
anyone, please?

If you are starting in SD and can use compressor, that works better: there are more knobs to twist to adjust the results to your liking. Going from HD to SD, I think compressor or a third party encoder is a must. Just too many things to tweek to get it right for the video you shot.
AC3 has another advantage in addition to file size: bit rate. There is a limit on what DVD players will handle - usually less than 10mb/s. And if you can have video + audio well under that, you disc will be compatible with more players. If can always put both on the DVD, and use a menu to let a user pick one, but you don't want menus yet, as you said. Many music DVDs do just that: PCM for best fidelity (it is noticeable on a really high end system that most mortals don't have), or DD, even 5.1 for everyone else.
Encoding: I use 7.5mb/s max for video, and adjust the "average" depending on how big my video is; I've used as low as 4.2 for stage plays and it was not too bad. If you have a short video, you might use CBR (contstant bit rate) at 7.5 for the best quality. I likewise adjust my AC3 bit rate; 192 stereo where I must save space and the original sound quality was not great anyway, up to whatever the max is (384, I think).
Eddie O

Creating a DVD with Chapters?

I have a DVD that was created from an old VHS tape using some special software on a PC that allowed me to create the DVD from the VHS tape. Now I have a working DVD, but the problem is it doesn't have any chapters in it allowing me to jump right to a specific place.
Can I re-rip or import this DVD somehow into iMovie then break it up into chapters and burn it again with iDVD? The movie is basically a learning tutorial where chapters would allow me to jump directly to a specific section of the movie. Right now it's all one big movie where I have to fast forward to get where I'm going.
I hope some of this makes sense and someone can point me in the right direction. I don't know much about iMovie and/or iDVD. I'm assuming these would be the programs needed. If not, please let me know.
Thanks,
-Greg

See [this post for how to import the DVD to the Mac.|http://discussions.apple.com/thread.jspa?threadID=2255575]
See this [Tutorial by Ken Stone|http://www.kenstone.net/fcphomepage/imovie_09stone.html#markers] for how to do chapter markers.

How to create a DVD with 2 separate movies?

I'm a coach - and as I break down game film for my team, I'd like to distribute a single DVD with an Offensive film and a Defensive film, on a single DVD. Once I edit the original clips, I usually have about 20 minutes of offense, and 25 minutes of defense. Is it possible to open a DVD menu, in PE and just drag/drop my two films into the menu? I've already made the separate films - just can't find a way to put them on the same DVD - with separate launch buttons.
Please advise - thanks.
Coach B.

Coach B
In Premiere Elements, it is the placement of the menu markers at the Timeline level in Edit that is going to be the important first step. There placement at the Timeline level will determine how they are represented (linked to) the buttons in the menu(s). The menu markers for this are going to be main menu markers and stop markers as per details.
1. Setting up the Timeline.
Place a main menu marker at the start of the first file of Offense Section.
Place a stop marker at the end of the last file of Offense Section.
Leave a few frames gap between the end of the Offense and the start of the Defense.
(You cannot sit one marker on top of another)
Place a main menu marker at the start of the first file of Defense Section.
DO NOT place a stop marker at the end of the last file of Defense Section.
2. As shown in the blog post to which I referred you for background information, there are two types of buttons we could use for Offense button and Defense button on the main menu. Let us start with using just the thumbnail type button.
For now we will be assuming the end product as DVD-VIDEO Standard (4:3) on DVD disc.We will use the Sports/(AV)Extreme theme and do some file switching.
a. You need to get copies of the following files from the Program Data
sportchannel_pal_s_sm.psd
sportchannel_pal_s_mm.psd
They are copied at their saved located
Local Disk C
Program Data
Adobe
Premiere Elements
11.0
Online
DVD Templates
All_Lang
Sports
and in the Sports Folder are those two files cited above which you copy and paste to an empty folder that you created on the computer desktop.
b. Switch the file names so that the main menu has the scene menu design and vice versa. And, modify the names so that you do not mix up these modified files with anything else.
So, you want to end up with a folder name mysportchannel on the computer desktop
and in that folder are the two files who names you switched and changed.
sportchannel_pal_s_sm.psd is changed to mysportchannel_pal_s_mm.psd
and
sportchannel_pal_s_mm.psd is changed to mysportchannel_pal_s_sm.psd
Take the desktop mysportchannel folder with these modified files and place it in the following spot in the following path...
Local Disk C
Program Files
Adobe
Premiere Elements
11.0
DVD Templates
Common
and in the Common Folder place the mysportchannel folder.
When you go to select this theme in the Movie Menu customization of the opened project, look under the Slideshow catagory.
You should be looking at something like this in the Movie Menu customization area
Lots ot fine tuning yet to be done, detail wise.
1. Is your end product, DVD-VIDEO standard 4:3 or widescreen 16:9.
2. Do you want the music background that comes with the original main menu?
3. Do you want a Play All opportunity? This one allows for pick one or the other then return to the
main menu.
Please review the above. Do not hesitate to ask for clarification.
Thanks.
ATR

How do I create a DVD with no menu ??

Can I create a DVD that plays like a CD, using track numbers instead of a on-screen menu? I have several QT files, and I'd like to be able to jump between them using the buttons directly on the (commercial) DVD player... with no messing about in a DVD menu. The DVD is for a projection during a theatrical performance, and I don't want there to be a menu flashing up on the screen. Many thanks!

Welcome to the forums.
Most inquiries relate to autostarting the DVD or not having a theme -- perhaps you'll be stuck with those options. But you might first want to create a short test DVD, but join the QT files with a couple seconds of black between the "tracks" and put chapters at the beginning of each track. That will let you jump from one track to another without going to any menu and it gives you a little time at the end of a track to manipulate the controls. What you can experiment with is whether your remote will allow you to jump to a non-sequential track (if you press #4, does it jump to chapter 4?).
In DVD Studio Pro, you can program the desired action to specific buttons, so I assume you could do what you want.
Another thought, iDVD does (used to?) support scripting so that might be something to investigate. See this link for some resources:
http://search.oreilly.com/?q=applescript
And finally, a non-tech solution: use two DVD players and have the other one set to play the next video and use a switch to go between the two outputs (or switch between inputs on the projector).
John

Satellite U400 Impossible to create recovery DVD with Recovery disc creator

Similar Messages

Maybe you are looking for