Satellite U405 Black screen when I surf in the internet

Dear, I am a student in grade three and my laptop has a problem I want help. It will be black screen when I surf in the internet for over 3 hours. Why?
I guess my laptop battery is the key to the problem and some friends recommend a battery web for me.
what do you think about it?

I have no idea why you are thinking that battery cause this issue???
In your case I would say that your graphic card driver has crashed
I recommend reinstalling or updating the graphic card driver to check if this would help to solve this

Similar Messages

  • Grey  color cover the screen and can't use touch screen  when trying to open the internet.

    Pleas help, yesterday when I tried to open an website on my I pad 2 and there was a grey color cover the screen and I can't use touch screen, i still can see the internet is working in the back ground of the screen and the webpage was opend but I just can't make the grey color screen disappear. Thanks million.

    Go to Settings>Safari>Clear History, Cookies and Cache. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If that doesn't work, reset the iPad. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Last thing to try is quit the app and restart the iPad. Go to the home screen first by tapping the home button. Quit Safari by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on the Safari icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • Satellite A200 - black screen when reboot

    I have Satelitte A 200 and I have the problem that when you reboot I should have only a black screen and goes no further. But I do not beep. Only available in one place. I have tried everything but nothing brings order. I wanted to install Xp but it does not work. Help.

    Hi
    You mean you dont see anything on the screen while booting? Not even the Toshiba splash screen?
    Are you able access the BIOS?
    Please check this.
    You could also check this; remove battery and disconnect the AC adaptor. Then wait a little bit (1 hour) and after this short period of time connect both parts again.
    Then try to boot up.

  • Black screen when trying to access the web

    I'm having problems accessing the web on my 2nd generation iPod Touch. When I tap on the 'Safari' icon I get a black screen. The WiFi is working fine; I can access and use my Facebook, WeatherBug, Google Earth using their icons no problem, for example. It's when I tap on the Safari I get a black screen. There is a full signal.
    Thanks for you help.

    I have tried to restore your iPod yet? You could start with a reset (Home and Sleep/Wake buttons held down until you see the Apple logo) but I think you are going to have to restore (via iTunes). When prompted to restore from a backup or new, start with backup so you won't lose anything.

  • "ERROR" screen when trying to access the internet

    Can anyone tell me why I keep getting this screen when I try to access the internet? Everything was fine last night and when I woke up this morning I keep getting this screen. My laptop works just fine.
    ERROR
    Couldn't resolve the host name
    Thank you
    Doug

    reboot wifi router and playbook and see if it persists after
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Yoga 2 Pro - Black screen when on tablet mode

    Hi,
    2 weeks Yoya 2 pro out of the box, and get a black screen when reaching the tablet mode (back of the lid touching the back of the laptop base).
    I try hanged the setting under power management, with no success. When reaching the tablet mode, I get the same result as closing the lid in laptop mode.
    I connect my Yoga 2 to a TV through the HDMI and can see the screen and interact with the black screen (not easy to touch the right spot).
    My bios is updated and I have Windows 8.1.
    Any suggestion???

    I found the answer to my problem at
    http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-2-Bios-Update-Crash/m-p/1322487/high...
    Now that I found that post I do recall the instructions telling me to turn it off manually when I updated the bios earlier this year. However, the current instructions do not mention it at all, perhaps they should be updated?

  • I attempted to use netflix on my MacPro safari 10.5.8, I get a blank black screen when I attempt to watch a video, Has anyone encountered and solved this dilemma?

    I attempted to use netflix on my MacPro safari 10.5.8, I get a blank black screen when I attempt to watch a video, Has anyone encountered and solved this dilemma?

    I also have downloaded netflix "Silverlight" I believe successfully...at least acoording to the popup at the end of the Silverlight download "You have successfully downloaded Silverlight"

  • My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable.  When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

    My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable.  When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

    I have had a 3GS for 2+ years.  After upgrading to IOS 4 (now 4.3.5) I began having problems.  In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that!  I connected to itunes and it did restore from a backup but it is a major inconvenience.  I am also searching for answers, but better back-up regularly!

  • Why do I get a black screen when i click on a PDF in a web page?

    why do I get a black screen when i click on a PDF in a web page? Firefox works as is should.

    Hi,
    From your Safari menu bar click Safari / Preferences then select the Extensions tab. If you have any installed, turn that off, then relaunch Safari. Try a PDF file.
    If it's not Extensions, open a Finder window. Select MacintoshHD in the Sidebar on the left. Now open the Library folder then the Internet Plug-Ins folder. If you see any files such as this:
    AdobePDF Browser or Viewer Plug-in
    Move it to the Trash, relaunch Safari.
    Carolyn :-)

  • My iphone 4s goes to a black screen when in use of any apps. after the update to ios6 any ideas for a fix?

    Since i updated to ios 6 my iphone goes to a black screen when it is in use. I could be texting and 5-10 sec later it goes to a black screen and than to the home page. Its also will be when playing games and so on. Can you please help me with this? I have tried resetting my phone, press the home button 2 time and canceling any running apps and even press home and powering button and still does the same thing. I need help!!!! Any suggestions?????

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • My ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...

    my ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.

    My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
    Will not show up in safe mode, will not show when started from Windows 7 DVD.
    I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
    Can see the PC volume from Mac side with files.
    I've looked at all the online solutions so far and have tried most of them without success. Please help!
    Specs:
    2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,2
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          3.06 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          6 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MBP52.008E.B05
      SMC Version (system):          1.42f4
      Serial Number (system):          7302300GANE
      Hardware UUID:          B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
      Sudden Motion Sensor:
      State:          Enabled

    EDIT: RESOLVED
    For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
    Specifically, the posts by Dunsany and valkyr did the trick.  I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally.  I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
    Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again.  I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time.  Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black.  I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
    Hope this helps someone else!

  • Black screen when opening in .pdf

    I'm having problems with opening the C5-project in .pdf. Some people get a black screen when opening the .pdf file (version 9 or higher), most of the time it goes well, but 1 out of 10 times it doesn't work. I have know idea what could be the cause of the black screen (use of laptop?).
    Now it is impossible to send this project to our stakeholders, because I don't know whether it works or not.
    Does anyone recognize this and knows why this happens, and how to solve this?

    There was a recent patch released by Adobe for Captivate 5 that addressed a similar black screen issue in Captivate SWFs.
    You can get the patch here: http://www.adobe.com/support/captivate/downloads.html
    It may turn out to fix your issue as well.

  • I can't upload Iphone 5 video or send it in an email. It will play in iTunes but just gives a black screen when I try o email. I get an error message when I try to upload. Any Ideas?? I've already reinstalled OS X

    It will play in iTunes but just gives a black screen when I try o email. I get an error message when I try to upload. Any Ideas?? I've already reinstalled OS X

    Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

  • HT1937 I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened

    I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened. I need suggestions to make it work or the reasons for not working.

    Yes TeeKnows, try deleting it and download it again. After finished installation if still shows black screen delete it out off 'running apps' by double tapping the home button and swipe it off. If still shows black screen then try fully turning off your iPad (holding the sleep button) and turn back on again.
    I hope I helped
    thanks
    Lydia

Maybe you are looking for

  • Events are not in order

    For some reason my events are not in chronological order. If I go to photos, they are, but in events there are some from August stuck in between events in December, and then many events are missing, which again, still exist under photos..

  • JVM bug with Turkish locale settings (windows)

    Hello, There is a serious bug in all versions of java virtual machine. When you set your locale settings to Turkish language, you can not install & use database driven java applications (that needs to create a database). For example; you can't instal

  • How to unlock an A

    How can I unlock an A&T iPad cellular? Thank you for your assistance.

  • Financial Statement version (f.01)

    Hi All, T code F.01 Can any one can hint me to change the ITEM no. in the ALV Grid control list of a  FSV.(one of the three types of outputs ) I need to change the Item no. of of two gl accounts which appear in FSV (from NO.1 to 83) Is there any poss

  • Slicing Problems

    Help. I created the graphics in Fireworks. Editor is Dreamweaver. The right side is my problem. My problem arises when I make a slice to cut out a hole in the graphic so I can add a text scroll script. It creates several more images in several cells.