Satellite U500-119 toolbar disappears sometimes

On my Satellite U500-119, sometimes the toolbar disappears.
To solve the problem, i must reboot the computer.
How to solve this problem?

Hey,
Which toolbar you mean exactly?
Do you mean the Flash Cards on the upper side on the screen?
If yes you should try reinstalling Toshiba Value Added Package. This package controls the FN keys and the Flash Cards they will displayed if you press a FN key. You can download it here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
You have to remove the old version first and then restart your notebook. Now you can install latest VAP from Toshiba page.

Similar Messages

Satellite U500-17E - Sound distortion sometimes

Hi,
I have problem with sound. Sometimes there is sound distortion short while (it is about half second and sounds like it is cycling). Please help me.
I have Toshiba Satellite U500-17E with Windows 7 HOME PREMIUM.
Thanks

Hi, so I downloaded Nvidia and Realtek audio drivers and install it. It had no affect. Then I noticed that there is 4 Nvidia same drivers and only diference is that in propeties is location(0), location(1), location(2), location(3) so I unistalled three Nvidia sound drivers.Also turn on high performance.Still not fix.I don't know why there were so much drivers because I didn't make any changes in drivers.Also I didn't know if it is normal that there are Nvidia and Realtek drivers and not only one audio driver.
If you have any ideas please let me know.
Thanks

Satellite U500-11C fan sometimes doesn't start running Win 7 64bit

Hello,
I have two Toshiba Satellite U500-11C under Windows 7 Home Premium 64 bits. Sometimes, after a new Windows start, fans don't start and just run a few seconds sometimes. When this happens, the CPU temperature gets very hot (don't know exactly how much). I've found a way to get back to a normal behavious by just unplugging the AC cable and replug it just one second or two after.
Must two laptops have the latest Bios and drivers from Toshiba. In some way, it is the same behavious as under Linux.
With those experiences, I come to think that Toshiba Laptop are not well managing correctly ACPI Fans and tempartures. Is it really a fatality ??
Hope this feedback can help...

Hello Tonny,
Yes, I think like you that when I have this fan issue, it means that BIOS feature doesn't work correclty on regulating temperature with variable fan speeds, and finally, it is the overheating security which makes the job. When using Linux, I've seen that ACPI temperature levels are not correctly defined or published by the BIOS : Fans are not expected to be launched before the CPU burns at more than 108C !
What surprises me is that this is a bug in the BIOS that has been living here since the first BIOS versions, and that my researches on various forums show that this Satellite U500-11C is not the only one to have fan issues from Toshiba Laptops on both Linux and Windows.
That said, I don't understand what Toshiba tries to do when making special BIOS versions, instead of using more standard ones with correct ACPI functions programmed inside. Other laptop manufacturers are more "standard" in their approach, and give users more satisfaction on everyday use.
In the same idea, I've finally removed most of Toshiba applications on one of my two Satellite U500-11C and it runs much better : lower power consumption, less heating, more responsiveness, ...
Hope this helps...

Satellite U500 - Bluetooth issues BT Monitor vs. Bt Stack

Hello everyone,
My wife's machine is a Satellite U500-10L PSU5EE-002003AR, now with Windows 7 Professional 64-bit (originally with Vista pre-installed, later with W7Pro 32-bit.)
Now, I've always had various issues with Bluetooth on this machine, and it's the only machine I've ever had Bluetooth issues with, mostly having to do with internet connectivity via mobile phones.
Most usually, I connect to the internet using Sony Ericsson PC Suite and a Bluetooth-controlled Sony Ericsson mobile phone (currently and Elm, and occasionally a Hazel or a C702.) This setup has always worked flawlessly on every other machine I've used, such as my Getac B300, the old HP Compaq 6710b given to me by my previous employer for a couple of years, and even my untrustworthy old Thinkpad T42 (now deceased), and my mother's ancient Macbook. With those machines, I've never had any trouble connecting to any of the phones or to the internet, with no drops, connection issues or any other issues.
Not so with this U500. I'm writing this while connected through PC Suite, with Bluetooth Monitor 4 as the hardware controller. The connection is intermittent at best, usually unreliable, and sometimes downright impossible. Sometimes it works flawlessly for days on end, and sometimes it just refuses to work. Generally, though, I get a connection more often than not, but the issue is annoying nevertheless.
Now, I tried a different approach: I uninstalled Bluetooth Monitor and SE PC Suite, installed the Toshiba Bluetooth Stack and tried to connect to the internet directly through the BT Stack. I paired the Elm to the U500 successfully from the BT Stack control panel and managed to dial the connection, so far so good. But I had no internet access whatsoever. Now, the phone shows that it's actually connected, and so does the BT Stack control panel and the Windows 7 connectivity monitor in the system tray, but there's no actual access to the internet (I only get the little yellow triangle with the +no internet access+ message, but the phone is dialed in.)
So, I tried reinstalling PC Suite (with BT Stack present), and things got even worse: now the BT connection itself between PC Suite and the phone is only sporadic and intermittent, but sometimes it just works well enough to actually get a connection (albeit an unreliable one.)
So now I've uninstalled the BT Stack, reinstalled BT Monitor and went back to using PC Suite for dialing, and the same issues I mentioned earlier still persist.
Now, my two questions are these: a. why didn't I get any internet access with BT Stack, even though the phone was actually dialed in to the connection? and b. assuming the internet access issue is resolved, would I possibly get a more reliable connection (i.e. one that doesn't suddenly decide to drop every so often) with BT Stack instead of the PC Suite/BT Monitor setup?
Thanks in advance.

Just an update: I've found that as long as there is a direct line of sight between the phone and the U500, there would be no issues. The Bluetooth connectivity issue only starts to appear whenever there's something - anything - in the way between the two.
Let me clarify. Now I'm sitting at my desk, with the U500 right in front of me, while the mobile phone is hanging from a nail in the wall above me and to the left. Now that there's a direct line of sight between the phone and the U500, I have no issues at all.
Now, let's say I take the U500 off the desk, put in on my lap, and turn my back to the phone. In this case, my head and torso would be in the way of a direct line of sight between the two, and the stability of the connection begins to deteriorate, and it becomes very unreliable - sometimes even dropping the Bluetooth connection altogether (Sony Ericsson PC Suites goes all gray on me!)
Here's another example: there's a printer sitting on the desk right to my left. Now, if I stack up a bunch of magazines on top of the printer, high enough to be within the line of sight, I will start having issues!
So, I'm pretty sure it's a Bluetooth connectivity issue, and has nothing to do with the internet connection or firewall. It's clearly a hardware quality issue.
By contrast, I never experienced any such issue with my B300, the HP Compaq 6710b I had earlier, or even with my now-deceased ThinkPad T42. Hell, I might as well have gone into a different room entirely and still maintained a Bluetooth connection with those three machines! With the Toshiba, though, as soon as I carry the thing out the door - which is about four feet from the phone - the connection is gone!

Satellite U500 - The volume buttons do not work

Hello
I just bought a Toshiba Satellite U500 two days ago, and already having problems :(
It has a touch sensitive control buttons, which includes the eco utility, media buttons, and volume control (+ and -)
The volume buttons do not work, and sometimes the computer freezes upon touching them. Once I touch the -, it keeps turning the volume down until it reaches zero, and even if I turn it up using windows, it returns to zero (like if the button is still being pressed). The + one doesn't work at all.
Please help. Any way to reinstalle their drivers ?
The only solution I found is to disable them using HWSetup...

Solved.
I just had to uninstall the Toshiba Common Modules, and reinstalled them. It worked.
I hope it doesn't happen again.

Updated from v28.0 to 29.0 and the Roboform toolbar disappeared!

I just updated from v28.0 to 29.0 and the Roboform toolbar disappeared. Actually, it reappears sometimes at the very bottom of the screen. Any idea how to get it back to the top where it belongs? I checked the add-ons screen and it is enabled and apparently compatable with FF v.29.0.

You can check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf
Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

My back button and refresh button and my yahoo tool bar are dimmed a lot when I open up firefox. So as a result, I cannot use the back button nor my refresh button AND my yahoo toolbar disappears a lot. I have tried to get on your chat session but it is a

<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [/forum/1/688252]
Thanks - c</blockquote>
== Issue
==
I have another kind of problem with Firefox
== Description
==
My back button and refresh button and my yahoo tool bar are dimmed a lot when I open up firefox. So as a result, I cannot use the back button nor my refresh button AND my yahoo toolbar disappears a lot. I have tried to get on your chat session but it is always closed. I need one on one help. Please reply with resolution.
== This happened
==
Every time Firefox opened
== two or three months ago
==
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 (BT-canvas) Firefox/3.6.3 GTB7.0 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdnu
*npdnupdater2
*Coupons, Inc. Coupon Printer DLL
*Coupons, Inc. Coupon Printer Plugin
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*6.0.12.448
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*BrowserPlus -- Improve your browser! -- http://browserplus.yahoo.com/
*Shockwave Flash 10.0 r45
*Yahoo Application State Plugin version 1.0.0.7
*3.0.50106.0
*My Web Search Plugin Stub for 32-bit Windows
*Google Updater pluginhttp://pack.google.com/
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Npdsplay dll

* If the menu bar is hidden then press and hold the Alt key down, that should make the Menu bar appear (Firefox 3.6 on Windows) (see [[Menu bar is missing]]).
* Make sure that you have the ''Navigation Toolbar'' and other toolbars visible: View > Toolbars .
* If items are missing then see if you can find them in the View > Toolbars > Customize window.
* If you see the item in the Customize window then drag it back from the Customize window to the Navigation toolbar.
* If you do not see that item then click the Restore Default Set button in the View > Toolbars > Customize window.
See also [[Back and forward or other toolbar buttons are missing]] and [[Navigation Toolbar items]]
See http://kb.mozillazine.org/Toolbar_customization

In Firefox v4.0.1, custom toolbars disappear from the toolbar menu when I open a "New Window".

1.
I created a new toolbar in Customize... / Add New Toolbar. It's on the list of toolbars and opens up '''most times''' I start Firefox, but not ''always''. I have tested it and it is completely random.
2.
Same type of problem as 1., but '''''everytime''''' I use the 'New Window' feature the custom toolbar disappears from the toolbar menu and if I need to use it, I have to '''save all tabs as bookmark''' then close and reopen FireFox so I get my original window [where the toolbar shows up]. AARRRGHH.
I've been using FF for 7 years now, so I know enough to rule out corrupted localstore.rdf, new or updated add-ons (I could be wrong though, as I often am...).
Has this come up with other users? Am I being cursed? [lol] any help would be appreciated.

cor-el,
Sorry it took so long to get back to you.
You know, you're right. I should try everything, no matter how smart I think I am!
It's been 3 days since I deleted the localstore.rdf file and so far so good.
Thanxs for the help

Satellite U500-1F5: eco and FN buttons don't work after BIOS update

Hi everyone,
I hope i can find a solution for my problems in here.
I bought a new Toshiba Satellite U500 (PSU9ME),
I am updating my laptop regularly whenever i receive alert through TEMPRO or Toshiba service center.
Last week I received an alert to updat the BIOS and i did it. since then i noticed the following problems:
1. eco utility is not working, and when i tried to uninstall it it says (BIOS unsupported)
2. the on screen funtion buttons that appear on the top of the screen when you press the Fn button does not apear anymore
3. the touchpad lock and unlock button does not work and even pressing Fn+F9 doesnot lock it
I hope u can give me an answer regarding my problems,
I already downloaded the latest updates for the eco and value added packege from toshiba site and installed them,
BUT
didnt solve any of my prob
still eco utility is not working. The msg (unsupported BIOS), appear when i run the update.
The function buttons bar on the top of the screen not working ( even after i uninstall the toshiba value package and re-install the latest one) and the touch back lock/unlock button also is not working.
I hope Toshiba can find me a solution, coz I dont have the time to go the service center
Model U500-1F5 PSU9ME00D00XAR
Windows 7 (64)
Thanx in advance

Hello
At first just one comment:
*I am updating my laptop regularly whenever i receive alert through TEMPRO or Toshiba service center.*
Thats nice but definitely not necessary. When the system runs well, don't touch or change anything. Maybe sounds stupid now but I recommend you to remove TEMPRO from the system. Believe me you don't need it. I have 2 years old Satellite A300 and still original BIOS. It runs perfectly and I don't want to make risk and change anything. Since last month I have Satellite U500-1EX and will do the same. Tempro is already removed and I am happy with factory settings.
All you have done is OK but at least you can try to reinstall whole OS now using HDD recovery option (F8 at start-up) to see if everything will works well again. sorry but if this will not help I think you need BIOS downgrade to old version.

How to format and recover Satellite U500

Hi
I have toshiba satellite u500 1GB ram and windows vista home edition.
I created recovery CD in long back but its damage.
I want to format my system. I try from recovery partition from my laptop but its not work.
Can you help me to formate my laptop from my hard disk recovery partion
favas

Hi
If the recovery partition does not work and if you are not able to use the HDD recovery then you have just only one chance to get the factory settings.
You need to use the Recovery disk.
If the recovery disk is damage then you have to order a new one.
Check the page posted by user above.
PS: you can also use an clean MS Vista or other system disk.
The needed driver are available on Toshiba driver page

Satellite U500-1E0 - Webcam shows only black screen

Hi everyone,
I have this problem, my webcam doesnt work. It has a blue light on which indicates that it is running but it only displays black screen. I've tried updating software, uninstalling it, reintstalling again but nothing helped. I even downloaded a new driver from Toshiba website but nothing.
Please, does anyone have any kind of solution to this problem?
My laptop is Satellite U500-1E0
Thank you
Email: [[email protected]]

Hey,
If the webcam shows just a blank screen I could imagine its just a wrong webcam setting.
On Toshiba website I did found a useful article I think:
[How to change the settings for the integrated webcam if the image is very dark or black?|http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=59]

Satellite U500 - Black edges on external monitor

Hello,
I have problems with HDMI connection to TV.
At FULL HD resolution is in 42" FULL HD TV about 4 cm black edges all around display.
I tried with 3 different HDMI cables, 2 different FULL HD TV and one LCD screen, but everywhere were black edges. Black edges appears when you start computer (at first Toshiba screen and BIOS too).
With same cables and monitors but other laptop is picture without edges.
When I was tryed with HDMI cable (stl.U500) which have got on the other side DVI output (LCD FULL HD screen) was picture without black edges. With normal VGA - VGA cable is FULL HD picture also without edges.
Where could be a problem?
System is Windows 7 64bit with latest ATI display driver and latest BIOS (2.20).
Greetings

Hi Mathew,
Im not a Satellite U500 owner but I assume there must be something wrong with the settings. I never had any problem with the HDMI connection to my external monitor or TV. Its always working fine.
Anyway, what screen resolution you are using on external monitor? You should use the native screen resolution on external monitor. Then you should be able to use fullscreen mode there.
Check this!!!

Table toolbar disappeared in the screen reader mode in Oracle ADF

I have a validation message box(pop up) opening from a button action from page fragment(jsff) page and in screen reader mode the message box shows up as default on the same page instead of pop up message box and
and below the message box there is this message information "Press escape to exit this popup." and when I click ESC key it then shows up the main default page with the table toolbar disappeared. In the screen reader mode the ADF framework is taking total control over the showing message box as default on the same page instead of pop up message box and showing below message " Press escape to exit this popup.". My question is how to edit this page and is there any way to get rid of below message information. I also want to know does ADF provide any API in screen reader mode to control the table toolbar disappearing. I really appreciate any help or advice or any work around to solve this issue.
Eagerly waiting for the response.
Thanks in advance

I'm using JDeveloper 11g (11.1.1.4.0) which has come with accessibility feature(screen reader mode). I have no idea of which version of screen reader that Jdeveloper IDE has.
I use IE 7 browser and it is mandatory I have to use IE7 browser for this project. All I need help is how to get control of web page( jspff) when we use in accessibility mode. we configure like this
in trinidad-config.xml file.
<?xml version="1.0" encoding="windows-1252"?>
<trinidad-config xmlns="http://myfaces.apache.org/trinidad/config">
<skin-family>myskin</skin-family>
<accessibility-mode>#{accessibility.accessibilityMode}</accessibility-mode>
</trinidad-config>
for example like in this jspff file :
<af:panelStretchLayout
id="panelStretchLayout1" topHeight="#{accessibility.accessibilityMode == 'screenReader' ? '137px' : 'auto'}"
startWidth="auto">
<af:panelCollection binding="#{backingBeanScope.backing_pageFragements_.panelCollection2}"
id="panelCollection2">
<f:facet name="menus"/>
<f:facet name="toolbar">
<af:toolbar binding="#{backingBeanScope.backing_pageFragements_.toolbar1}"
id="toolbar1"
shortDesc="Toolbar">
I'm using like this, let me know I'm doing correct or is there any other way we can do to avoid toolbar to disappear.
I appreciate your help.

Satellite U500-1F5 - How to turn on Bluetooth?

I just bought Satellite U500-1F5 and I want to know how to turn on the bluetooth?
thanx in advance

Hi
Install BT stack.
Then enable the BT using FN + F8
Now you should see the BT icon in the taskbar.
Right click the BT icon in the tray bar and select Add New Connection.
It is also possible to launch Bluetooth Settings and then click the 'New Connection button'.
Then you can choose Express Mode.
Note; BT should be enabled on the external device (which you want to pair) too.
Then you have to choose this device (should be visible in BT window of the BT stack)
Then pair both devices using an passkey (i.e 1111)
Thats all
PS: take a look here:
http://aps2.toshiba-tro.de/bluetooth/?page=howto

Satellite U500/01C N-Trig DuoSense

Hi,
I recently purchased a brand new U500/01C ([PSU9BA-01C002|http://www.mytoshiba.com.au/products/notebooks/satellite/u500/psu9ba-01c002]) notebook computer with a N-Trig DuoSense digitizer (multitouch display) device built in. The device and software were working _perfectly_ up until about a week ago, when the software started displaying a notification window when opened "No devices found." The touch still works, however the functionality is limited (no multitouch or advanced gestures, etc.) and I can no longer calibrate the screen.
Despite the software reported no devices found, the hardware still shows up as installed and working properly in Device Manager; I have three entries under Digitizers: HID-compliant device x2 and N-Trig_DIGITIZER.
I have been troubleshooting and trying to solve the problem for the past week to no avail. I have tried uninstalling and reinstalling the software, uninstalling and reinstalling the drivers, removing the devices from Device Manager (including deleting drivers) and reinstalling, System Restore to multiple different restore points, reinstalling a fresh copy of Windows 7 from a retail disc and restoring the factory defaults from the TOSHIBA partition.
I have also searched everywhere I can think of for updated or even previous drivers but neither the [TOSHIBA website|http://www.mytoshiba.com.au/support/notebooks/satellite/u500/psu9ba-01c002/download] nor the [N-trig website|http://www.n-trig.com/CONTENT.ASPX?Page=Multi_touch] appear to have drivers for this model. The software/drivers I have been using are found in Start > All Programs > TOSHIBA > Applications and Utilities. They are version 2.224.
I have only tried 64-bit operating systems as I want to utilize all 4GB of memory. I have not yet tried a 32-bit installation.
Where should I go from here? I have contacted N-Trig but have not yet got a response. Is there a TOSHIBA support email I can write to? Should I try a 32-bit installation? Are there alternative drivers available anywhere? Have I got a faulty product?
Thanks in advance!

Hi Jim,
Thanks for the suggestion, I can't believe I missed it (I was only searching TOSHIBA Australia I think)
I have tried these drivers but there is no difference. Also, these drivers were apparently older than those that came prebundled with the computer (2.181 vs. 2.224).
I am surprised than not even a fresh install of Windows (retail) nor restoring the computer to the out of box state have made any difference.
I still only have one touch point and still cannot calibrate or activate multitouch under the software (still get the "No devices found" window).
Hopefully there is a solution out there.
Thanks, Tim.

Satellite U500-119 toolbar disappears sometimes

Similar Messages

Maybe you are looking for