Satellite U500 - Copy process is very slow

Hi friends,
I'm using Satellite U500-1f5, for last 2 months. It is core i5 with Windows 7. Still the copying process is very slow and some times booting is little bit slower.
Can anyone post a valid answer to resolve this problem?

Hey mate,
Sounds like that you have installed a lot of software that slows down the performance of your notebook.
So which programs you have installed?
Theoretically it could also be caused due a virus or trojan. You should check your notebook for viruses using a good antivirus program like AntiVir.
Try also to defragment the HDD. If you install/uninstall many programs, you should defragment the HDD from time to time. You can use the integrated Windows defragmentation tool.

Similar Messages

XI message processing is very slow

XI message processing is very slow.I did everything in tuning guide, but it is still very slow.
I executed <b>DB13-->Check and update optimizer statistics</b>
XI message is faster in another XI server.Although another XI server's hardware is weaker.
I checked DB2 tablespaces and extend them.
What can I do for higher performance?
Thanks.

Hi Cemil
The following thread can throw some light on what you are looking for..
Where could I find the information about XI performance?
Also, check the following pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3fbea790-0201-0010-6481-8370ebc3c17d
Regards
krishna

Dv4 1241TX issue getting too much heated, processes are very slow

I've got Pavilion dv4 1241tx notebook. 11 months old. only genuine s/w including OS installed.
It gets heated up very fast, you can actually fry an egg on that i guess.
the processing gets very slow that simple game like counter strike (needs 256 ram, mine is 3 gb ram) doesn't run smoothly.
HP has to to something for this problem. today i went to the athd. service center and the guy told me to hand-over the laptop for checking. i wrote a mail to HP care, but i guess HP is minting toooo much of money, so why bother.
As compared to other laptop (dell, lenovo) HP comes at a price almost similar to them but the overall performance is pathetic.i have been an computer pro right from my school days and now regret of not buying the MAC.
HP guys please reply if you have any solution to my problems. otherwise i guess this is how HP works.
Thanks,
Soham Roy
SAP GRC Consultant

Thanks for your response.
How would I check these details. Excuse my ignorance, but I am not too sure where I need to look.
Would I find those detail in Network Settings?

Copying files either very slow or doesn't work at all

I've tried copying files from a DVD to an external drive, and from one external drive to another, and I've been running into troubles on my Mac Pro, namely, I get an error code 36 (corrupted files) and the copying process hangs, requiring me to reboot. However, I was able to copy the files from the DVD to my laptop HD, so I don't think that corrupt files is the problem. After rebooting my Mac Pro, I was able to copy files from one external drive to another, but it was incredibly slow (about 1GB per hour), and I was still unable to copy files from the DVD to an external drive. I've verified all the disks with Disk Utility, and I've repaired disk permissions on my Mac Pro HD but apparently need to re-run since when I verify permissions again, I'm still getting a lot of errors or comments like "Warning: SUID file "usr/bin/rlogin" has been modified and will not be repaired". Scanning my Mac Pro HD for viruses, quite a few files are coming up with the comment "did not have permission to open the file." Other than continuing to repair disk permissions, does anyone have suggestions about what might be causing this and/or on possible next steps?

A little further info - I checked permissions and I have permission to copy the files in question. Also, it seems that most of the errors that pop up when I verify permissions are of the type that can safely be ignored, according to Apple -- I'll go through the list later and cross-check them to make sure that they're all ignore-able, but thats what they appear to be.

Satellite C660-1ZM is running very slow

I recently repaired my laptop back to its original state, so nothing had been installed on it, it seems very slow, as it crashes or stuggles to load on several basic programs, sometimes it loads fine other times it just hangs, I have installed several drivers from the list on Toshiba, but still stays the same.
Any advice?
Thanks,
Aaron

> what I did was repair my laptop with the startup repair, it then whiped my whole operating system off, so i did a complete reinstall of the operating system then removed the old version.
Usually a system recovery (using recover disk or HDD recovery) should set the notebook back to factory settings and this procedure should format the HDD and replace the whole system, drivers and preinstalled tools. In most cases this helps to get OS running properly
In your case it looks like system is affected by some processes running in the background.
Would recommend clearing the system and registry using CCleaner (freeware software).
Additionally you can take a look in taskmanager in order to check the processes.
There you can see what process locks the CPU and how many RAM is used by single process

Processing is very slow after update

Hi team
My xperia T 2 ultra dual is becomes very slow and some time it's strucks.. I am sure after the latest update I am facing this issue.. Please help me out...

Reinstall the latest update with PCC PC Companion (PCC) Bridge (for Mac) Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355

Satellite P500 - Splinter Cell is very slow - low resolution

Hey guys,
I have a Toshiba Satellite P500.
CPU Intel Core2 Quad processor Q9000 (2.0GHz, 1066MHz FSB, 6MB L2 Cache)
Operating System Genuine Windows Vista Home Premium 32bit (includes recovery partition for Windows Vista Home Premium 64bit)
Screen Size 18.4" Widescreen HD+ TruBrite Display (1680 x 945), supports 720p
Memory 4GB DDR2 (2GB + 2GB) (800MHz) expandable to 8GB
Storage 1000GB (500GB + 500GB) (5400rpm) SATA
Graphics ATI Mobility Radeon HD 4650 (2286MB Total: 1GB discrete memory + 1262MB shared memory with ATI HyperMemory technology)
Optical Disc Drive DVD SuperMulti Double/Dual Layer
Now im trying to play games like, Splinter Cell Convictions and things of that sort, apparently, according to the Games website, i meet all the recommended specs. Yet when i play the game its on a very low resolution and all settings set to LOW!
Is anyone else having these problems with there Notebooks?

Hi Sammole,
Sine few days I have Satellite P500 too. I have to say its a very great notebook, I love it. The screen is really good and big and in my opinion the best option for games, videos and all other multimedia stuff. Furthermore its equipped with fast CPU and graphic card, ideal for playing games.
All my games running fine so I dont know what happened to you. Make sure that the eco mode isnt active, this will slow down the performance.
Make also sure that newest display driver from Toshiba is installed and latest DirectX version from Microsoft.
Have also a look Splinter Cell homepage. Maybe there is an update (patch) available that can help you. :)

Copy paste mappings very slow

I am using OWB 11g and the copy paste opeartion of mappings in the design center is runnig too slow.
The paste operation takes a lot of time to complete. The session goes into a DB file sequential read wait event.
I tried gather stats of the OWBSYS schema, but it didnt help.
Please advice in this regard.
Thanks in Advance
Cheers,
Commander

Which version of OWB are you using, which patch level?
Cheers
David

New itunes copy/rip rate very slow

hello all,
after updating itunes to new version my rip rate has dropped, instead of a rate of about x7.0 to x10.0 i have dropped to x0.1 to x4.5.. it now take me hours!! to copy a regular store bought cd.
please does anybody have any ideas how to up the tempo (PS - reloading older version of itunes isn't working.)
thanks for any ideas, have a good one
ML

Tom,
Are you familiar with firewire target disk mode? If you were to connect the two computers using firewire you could do some file management. Make sure that you have key files on one machine and a TM backup. Then do a clean install on the Mini. Better yet, have you considered partitioning the drive on the mini so you can have the best of both worlds?
Depending on the size of the hard drive, you could have one partition for a clean install back up of just a system, one partition of the MacBookPro system with all your familiar settings and preferences and then one partition that is just a fresh start with every thing new and clean. All you have to do to compare and contrast is reboot to a different partition. If things get back to fast, you may not need or want all the old baggage that may be slowing you down.
Explore some options.
Ji~m

CD-DRIVE copying process is extremely slow on windows 7 professional 64 bit (on MSI workstation)

I am trying to copy files from a DVD disc (some 3 GB of data) using the CD-ROM
on this laptop. The transfer speed is EXTREMELY LOW! It starts with almost 3.5
MB/sec at first, but then after 10 seconds or so, it gets down to 500 KB/sec!
The transfer was going to take approximately 6 hours, which is a lot for a
laptop with specs like mine.
I tried to copy the same DVD to another
laptop, which had much lower specs than my MSI, the approximated time was 10
minutes.
I tried to update CD-ROM but it told me that it was up to
date.
My computer specs:
Name: MSI WorkStation Series GT60 2OKWS-674US
OS: Windows 7 Professional
64 bit
CPU: 2.7 GHz Intel Core i7-4800MQ
Hard drive: 1 TB 7200
RPM, 128 GB Solid-State Drive
Graphics: NVIDIA Quadro K3100 with 4 GB
DDR3 VRAM
Hard disk description: SATA
Optical Storage Device: BD
Burner
Cache Memory installed size: 6.0
I tried many solutions searched on Google, but none of them worked! One of them was to disable "Remote Differential Compression" but it did not work at all. I tried to use 3rd party programs such as Teracopy but no improvement.
Please help guys as i'm desperate and this problem is getting on my nerves.

UPDATE:
I noticed that the copying speed is ok until this error is encountered (attached)
after I click "Skip" the speed reduces dramatically to about 300kb/s and never changed

Satellite P200-100 is running very slow

My Vista C: drive is more or less full while my Data E: drive is virtually empty. Could this explain why the laptop is running so slow? Can I move some files from C: to E: and if so will this help or will it cause a problem?
Do I need memory expansion?
Hope you can help!

Generally speaking you can do this but dont move some files important for preinstalled applications.
What you probably need is general OS clean-up. Better solution is new OS installation but after doing this you must reinstall all applications that you use now.
What is your opinion: OS clean-up or clean OS installation? Let us know so we can continue discussion in the right direction.

SCCM2012-Client Push Installation Process seems very slow to me....

Hi,
I've yesterday configured my first SCCM 2012 installation. Around 146 systems have been discovered so far by using the AD discovery method. But out of those 146 only 9 have agent installed successfully by the time I am writing this post..Dont see any errors
in ccm logs, no dns issues,admin share accessible,and other required services are running, machines are reachable, correct sccm account with required permissions is defined and boundary configured correctly.
How long does it take to install 140 machines. Am I missing something, what else do I need to check, it is the only primary site server with no CAS installed in the site coz the expected clients in future are lesser than 1000 and SQL 2K8 R2 wSP1
with CU6 installed on the same host.
Any suggestion....would be a great help..
Thanks...
Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

Here is a script I wrote to push clients using PSEXEC tool (part of MS PSTOOLs)
1. I created Install folder on my SCCM server and shared it as Install$ for all Domain Computers
2. in this folder I put
-psexec.msc
-comps.txt (a text file contains computer names as a single column)
-script cm2012_client.cmd
-script install.cmd
3. Start a command line as Administrator and navigate to \Install folder
4.run install.cmd
Note: the script will copy source of Client folder locally to root of c:\, so you may decide to change the location and remove it.
Script cm2012_client.cmd
xcopy \\<your CM2012 Server>\sccm_client\*.* c:\client\*.* /y /s
c:
cd c:\client
ccmsetup SMSSITECODE=<Your site code> /source:c:\client
Script install.cmd (edit path to Install folder)
<path>\install\psexec @<path>:\install\comps.txt -s \\<SCCM Server>\install$\cm2012_client.cmd
Regards,
-Alex
Alex Ignatenko | MCITP:Lync 2010, Messaging, Server 2008 | MCTS:UC Voice, Virtualisation, SCCM, SCOM, OCS | MCSE: Security

Sending mail with "sent" is fast, but copying the sent mail is very slow, sometimes takes a minute; can it be speeded up?

After hitting "send", a screen comes up showing a moving bar "copying the mail to the sent folder", the bar goes fully right on
the screen but then I must wait, sometimes a minute for the copying process to complete. Then I always get a screen message
next that says in effect could not copy, so I close that screen and then go to my sent folder and the email I sent shows up. So,
the copy process is very slow and then I get a message could not copy, but in fact a copy does appear in sent folder????
Thank you

You do not mention how big is the Sent folder.
I would first try to archive a load of old sent emails. This will reduce the file size. Maybe the delay is due to a large file.
Set up Archive Options:
* https://support.mozilla.org/en-US/kb/archived-messages
choose to archive by month and year and keep folder structure.
Archive anything older than a month.

Multiple crashes fixed by turning off hardware and Flash acceleration; very slow now. Takes five seconds to exit and still listed as a running process

A workaround was suggested by a member of the community to turn off both hardware and Flash acceleration. It worked fine (no crashes since), but runs very slowly. In particular, takes five seconds to exit and is often still listed as a running process. Very slow in connecting to Web pages, and very slow loading them because of the graphics. Very slow in loading video. I expected slower responses, but this is REALLY slow. I'm running 64-bit Windows 7 and an Nvidia GE Force 7800 graphics card with all the drivers updated and the plugins for Firefox mostly set on "ask to activate". Should I expect this much reduction in performance when the workaround I mentioned was put into place? If so, it's half a loaf at best. The only thing questionable is that I have two Youtube downloaders that I am trying, but I made the assumption that these were only applied when you downloaded something from Youtube.

In case you are using "Clear history when Firefox closes": do not clear the Cookies
If you clear cookies then Firefox will also try to remove cookies created by plugins and that requires to start plugin-container processes that can slow down closing Firefox.
Instead let the cookies expire when Firefox is closed to make them session cookies.
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: Keep until: "I close Firefox"

Ps -p running very slow (1-2 seconds) on Java process

Hi Solaris gurus:
I encountered a issue that running ps -p on java process running very slow, it took almost 2 seconds to complete.
I issued a truss on the "ps -p " command, the following is part of the output:
/1: 0.0001 fstat(1, 0xFFFFFFFF7FFFE1F0) = 0
/1: 0.0000 write(1, " U I D P".., 55) = 55
/1: 0.0002 open("/proc/19299/psinfo", O_RDONLY) = 3
*/1: 1.3170 read(3, "02\0\0\0\0\0\011\0\0 K c".., 416) = 416*
/1: 1.2401 close(3) = 0
/1: 0.0002 stat("/dev/tty", 0xFFFFFFFF7FFFE830) = 0
It seems that the read() spent the most time.
Anyone can help?

Not enough memory, page-outs is too large
8.91 GB Page-outs
After removing adware, and do a safe boot of Safari and remove extensions, then reset cache history etc. You need to do a boot into Recovery Mode and run Disk Repair from there. Also boot the system in Safe Mode.
On startup it sounds like you have a problem with the directory which would also account for long startups and checking the directory. Along with or instead of DU Repair Disk you can use Single User Mode and fsck -fy to try to fix the directory but in some cases that may not be enough.
Backups from before you got this adware and problems helps and should always be ready and able to restore a system from known good backups or system restore image.
4GB of RAM may have been fine originally but "Early 2011" is now 5 years and 4 OS version changes. You can upgrade the memory and while at it consider a nice SSD internal drive which will help as well. Take a look and see what prices and options there are from http://www.macsales.com for your 2011 MacBook Pro.
http://www.everymac.com
Community for MBP MacBook Pro

Satellite U500 - Copy process is very slow

Similar Messages

Maybe you are looking for