Satellite U920T - display, touchscreen and camera has stopped working

My U920 has been goten worst every day, first it was the thouchscreen, then the cameras and finnally today the screen has stoped working.
The ribon attachment has problems, don't know if I'm the only one or if is a design problem, but the main problemhas been the total lack of support from Toshiba.
Amazing how bad can costumer service be....

I dont understand why you are not satisfied with the consumer service but fact is that in case of hardware problems, you should always contact the local Toshiba authorized service provider which is available in your country.
How to now if its really an hardware problem or maybe just an software issue (corrupt system)?
There is a very simple method and workaround:
In most cases if you recover the notebook back to the factory settings, the software issues should be fixed the notebook should work properly.
In case the recovery does not solve the notebook problems, the notebooks hardware might be affected. In such case (as already mentioned above) you will need additional help from notebook engineer.

Similar Messages

  • Satellite T130: inbuilt web camera has stopped working

    Hi, I have the same problem of the question bellow, like I have looked around and I was not able to find the answer I need.
    I have a Satellite T130 and, suddenly, the inbuilt web camera has stopped working properly. A blue light is on, but there is no image. What can I do?
    Thank you

    Hi,
    the blue light is beside the web cam, on the top of screen. But this light is on when I try to use the web cam in anywhere, like Skype, Msn or even in programs in the computer that only take a pictue or make a video of you, without ineternet (I do not know the name of this program). But it seems that computer and the programs recognize the web cam, because there is no messages when I turn on the web cam.
    In Skype settings is the same, there is nothing wrong, there is no different message. The only thing is when I try to take picture a message appears: "failed", but the video seems to record normally, although everythng is black.
    Could you understand what I meant?
    Sorry about my english....

  • My macbook camera has stopped working - tried on Skype, Facetime, and Photobooth. Any ideas how to fix this?

    My macbook (purchased in 2007) Mac OSX Lion 10.7.5 camera has stopped working - tried on Skype, Facetime, and Photobooth. Any ideas how to fix this?

    If restarting doesn't fix, use the relevant suggestions from Apple's How to Troubleshoot iSight.  If nothing else there works, the repair by an Apple-Authorized Service Provider suggested there and by spudnuty will get it sorted.
    (Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
    Message was edited by: EZ Jim
    Mac OSX 10.10

  • My built in camera has stopped working since Skype...

    Since recent Skype updates the camera has stopped working - but it works in other applications. I am running on Windows 7 - do I need to uninstall and load n older version - anyone else suffering these problems?
    Solved!
    Go to Solution.

    You didn't state what camera you are using. There have been some issues with Dell XPS models. If that is the case, the problem has not been resolved as of yet. You can try downgrading to an older release to see if the camera works once again.
    You have two options to try to resolve this:
    1. Try 3rd party software like manycam (manycam.com). See if your camera works in the manycam software. If it does, select the manycam virtual driver in Skype and see if your camera still operates with the latest release. If you go this route be sure to do a custom install to install only the main program.
    2. Your other option would be to revert/downgrade to a prior release or a version that exists to address video/camera compatibility issues like the Skype special version:
    Skype 6.3
    http://download.skype.com/msi/SkypeSetup_6.3.0.105.msi
    Skype Special Version (6.1.999.130):
    http://www.skype.com/go/getskype-sse
    Depending on which versions work may determine if the compatibility issue was introduced in the newest versions or if you camera is not compatible with the new way video is rendered (Skype 6.2 and above).

  • HT1338 built in camera has stopped working, how can I update or reinstall the drivers

    Built in camera has stopped working, how can I reinstall the respective drivers?

    Here are my best suggestions for your camera problem, Stephen:
    •  If you have not already done so, shut down Mac, restart,
        and try again.  If the camera still does not work, continue.
    • Try ALL relevant suggestions from Apple's Troubleshooting
       article: http://support.apple.com/kb/HT2090
    (Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
       If you need to use the "reset" suggestion, use the correct reset for your Mac.
    • Use your Mac's Disk Utility to repair permissions and then
       download and apply the latest Combo Update.  For your Mac OS,
       the current version is at http://support.apple.com/kb/DL1640
    • Repair permissions again immediately following the system restart
       that completes the Combo update.
    Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of the camera.
    • If nothing else resolves your problem, yours is likely a hardware issue.
       Unless you have a current backup, make one now.
    Then use the final "Troubleshooting" suggestion:
    "... contact Apple or an Apple-Authorized Service Provider for service."
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • My FaceTime HD camera has stopped working on my 2013 11" MacBook Air.

    Recently, my FaceTime HD camera has stopped working. The green LED indicating that it's on will turn on for a second, then turn off. The camera is never activated, and it constantly repeats this cycle. I contacted Apple for help after I had tried repairing permissions, resetting the SMC, and reinstalling the OS as a last resort. I don't know what to do at this point. I'm running Mac OS X Mavericks, and the camera had no problems with the OS. The camera has just suddenly stopped working. Can anybody please help?

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    FIX:  
    1. You need Time Machine
    2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
    3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
    4. Go to Time machine in date that skype work fine.
    5. Change AppleCamera.plugin with file from Time Machine
    6. Restart system, Now skype need to work with camera.
    If that doesnt pass,
    Suggest looking here, much success has been found:
    http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

  • Camera and camera roll stopped working

    A week after updating to the ios5, my camera and camera roll stopped working. It shuts down as soon as it opens. I have tried to retrieve them from my phone to put on my computer, but my computer no longer recognizes my phone. I DONT want to lose any pictures. Can anyone help please?

    I'm having the same problem. I found that if I can get the camera roll to open long enough to select viewing photos by places rather than albums I can access my photos that way. You could then forward them to yourself on another device.
    However, I have no clue on how to fix the issue. I've tried resetting my phone (Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo)  and restoring my phone to default settings. Neither has helped.
    If anyone knows a fix, please let me know.

  • My internet and bbm has stopped working !?

    hi my bbm and internet has stopped working since about 5 o`clock yesterday , when i click on the internet "error " and i can click on the bbm but the recent updates has gone and i will try and send a message and it has the red clock next to it.

    Are you receiving or able to send email?
    ashlee, Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
    After reboot give it a few minutes and see if your data starts working again.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • MY COMPUTER (ISIGHT) CAMERA HAS STOPPED WORKING.... HOW DO I TURN IT BACK ON?

    MY COMPUTER (ISIGHT) CAMERA HAS STOPPED WORKING.... HOW DO I TURN IT BACK ON?

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • IPod Touch 5th generation front-facing camera has stopped working

    After updating to ios 7, my front-facing camera has stopped working on my ipod touch 5th generation. I have tried doing a full restore to factory settings, resetting data settings, turning it on and off, and all the basic things. Here are a few pictures:
    This is with the rear-facing camera, it works just fine.
    Now this is the front-facing camera:
    When i try to use the front-facing camera, the screen goes like this and the camera app freezes, i can't switch back to read camera or anything. Other applications like snapchat don't have a button to switch the camera.
    It's like the camera app is detecting that the version of ipod has a camera, but it can't seem to find it. Btw, i live in Australia and am an apple developer.
    I like srsly need to get my front camera working. Thanks
    I am also using iOS 7.1 beta.

    Likely a hardware problem as other has experienced the same problem
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                              

  • 'Attach photo' to emails and messages has stopped working. Help?

    'Attach photo' to emails and messages has stopped working.
    The function is grayed out. Help?
    — Relatively new iPhone 6+ with latest system ...
    If on a mac, I'd be running a disk utility or looking to overwrite an app, or re-install the system.
    Although over 25 years on Macs, this is my first iPhone... and I'm missing a few (probably) subtle things to do to resurrect this function.
    Help?
    Thanks

    Hi CartoonBob,
    If you are having issues with being unable to attach a photo from Mail on your iPhone, you may want to try some things to troubleshoot.
    First, quit all running applications and test again -
    Force an app to close in iOS
    Next, I would try restarting and if needed resetting the iPhone -
    Restart or reset your iPhone, iPad, or iPod touch
    If the issue is still present, you may want to restore the iPhone as a new device -
    How to erase your iOS device and then set it up as a new device or restore it from backups
    Thanks for using Apple Support Communities.
    Best,
    Brett L  

  • Installed new Premier Elements 12 and dymamiclinkmanager has stopped working

    The Sw does not start at all I get several error messages:
    Installed new Premier Elements 12 and dymamiclinkmanager has stopped working
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    dynamiclinkmanager.exe
      Application Version:    6.0.0.0
      Application Timestamp:    523cc6d3
      Fault Module Name:    MSVCR100.dll
      Fault Module Version:    10.0.40219.1
      Fault Module Timestamp:    4d5f0c22
      Exception Code:    40000015
      Exception Offset:    0008d6fd
      OS Version:    6.3.9600.2.0.0.256.48
      Locale ID:    1035
    and after those a Message:
    Adobe Premier Elements 12 has stopped working
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    Adobe Premiere Elements.exe
      Application Version:    12.0.0.0
      Application Timestamp:    523cd4d5
      Fault Module Name:    dvamarshal.dll
      Fault Module Version:    11.0.0.0
      Fault Module Timestamp:    523cc62d
      Exception Code:    c0000005
      Exception Offset:    0000000000034961
      OS Version:    6.3.9600.2.0.0.256.48
      Locale ID:    1035
    So did I purchase piece of crap, or what should I do to get the SW working?
    Br
    -H

    First, note that this is a user-to-user forum. If you want to contact Adobe, you'll need to call or write them on their main site.
    That said, as the note says at the top of the forum, you're going to have to provide us a lot more information if you want us to help you. "Stopped working" doesn't tell us much. Does this mean that it was working in the past but then stopped? What stopped? What did it do that it's not doing now? What were you doing when it stopped? Was it when you were adding video to your project, for instance?
    What operating system are you using? If Windows, have you manually gone to Windows Update and made sure you've got the non-critical updates, which don't download automatically to your system? Have you ensured you have the latest version of Quicktime, per the program's requirements?
    How fast is your processor, how much RAM do you have and how much free, clean, defragmented space is on your hard drive?
    What model of camcorder is your video coming from and what format and resolution is it? Did you use Premiere Elements to get the video from your camcorder to your Premiere Elements project?

  • My daughter has an iPod and FaceTime has stopped working as she is not able to verify her email address please can you help.

    My daughter has an iPod and FaceTime has stopped working as she is not able to verify her email address please can you help.

    As long as you can't get a hold of the device, you can't do anything more than talking to your daughter about it.
    Erasing the device could also be an option to keep her from using apps you don't want her to have on her device.
    Try talking first

  • Satellite L500D-144 - CCC Host Application has stopped working

    Ladies and Gentlemen,
    my PSLT6E-007004GR is almost a year old.
    Earlier this month there was an update - possibly from Microsoft - and since then popt always at startup in Windows 7 this window and look for solutions:
    Catalyst Control Center. Host Application has stopped working, it is searched for a solution.
    A new installation of the graphics card driver and Catalyst Control Center did not change. Instead, a standard graphics card driver from Microsoft is installed.
    Resetting the system to the month of October also brought nothing, for after fresh updates, the problem occurs again.
    So it is reproducible.
    Have already reported more customers or am I the first?
    What can you do to the problem?
    Sincerely,
    CBluebaerchen

    Hello
    > Resetting the system to the month of October also brought nothing, for after fresh updates, the problem occurs again.
    Do you get this display driver update from Windows Update?
    If yes restore the system to an earlier point and disable this display driver update and choose only the important updates from Windows. Thats enough.
    Otherwise you could try to run CCleaner. It can clean and fix registry problems.

  • Satellite A110-195 PSAB0E - sound card has stopped working

    Hello,
    My sound card has stopped working it was working fine but suddenly the sound quality started to faint and finally it stopped working i have tried the following methods:
    Realtek is default audio
    Control Panel/ Sound & Audio Devices/ Audio tab/ Sound Playback click on down arrow and check that the correct audio is selected. Typically the problem will be they something like "modem line 0 playback" might have been substituted for the proper audio device.( Didn't Worked)
    Chipset Utility - install ( Did'n't Worked Aswell)
    Start / Control Panel / Administrative Tools / Component Services / a separate window will open in left pane click Services(Local) from the tree / Scroll down to Windows Audio service / if the service is Disabled or Manual right click > select Properties > under Startup Type change to Automatic > click Apply / click Start > OK Reboot. (Worked) But First The Quality Was Not As It Was Before And Then Sound Card Stopped Working Again.
    Try a System File Check
    go to Run - type "sfc /scannow" No Success.
    I have installed windows again but no success. :(
    Here Is The Detailed Model No. Satellite A110-195
    PSAB0E-00F00KAR
    Windows XP Home Edition SP2

    No It Appears In Device Manager And In Control Panel.
    This Method Worked But The Sound Level Was Not As Good As it Used To Be:
    tart / Control Panel / Administrative Tools / Component Services / a separate window will open in left pane click Services(Local) from the tree / Scroll down to Windows Audio service / if the service is Disabled or Manual right click > select Properties > under Startup Type change to Automatic > click Apply / click Start > OK Reboot.

Maybe you are looking for