Satellite X200-15K - Flash Cards has stopped working

Hi
I have a Satellite X200-15K with Vista Home Premium.
The laptop is two week old, and all of a sudden every time the laptop startup, I get the following message:
"Flash Cards has stopped working"
What can I do to fix this?
thanks
Leon

Hi
Try please with Start-All Programs-Toshiba-Utilities-Restart Flash Cards.
Hopefully you will be able to use Flash cards again.

Similar Messages

  • Satellite A110-195 PSAB0E - sound card has stopped working

    Hello,
    My sound card has stopped working it was working fine but suddenly the sound quality started to faint and finally it stopped working i have tried the following methods:
    Realtek is default audio
    Control Panel/ Sound & Audio Devices/ Audio tab/ Sound Playback click on down arrow and check that the correct audio is selected. Typically the problem will be they something like "modem line 0 playback" might have been substituted for the proper audio device.( Didn't Worked)
    Chipset Utility - install ( Did'n't Worked Aswell)
    Start / Control Panel / Administrative Tools / Component Services / a separate window will open in left pane click Services(Local) from the tree / Scroll down to Windows Audio service / if the service is Disabled or Manual right click > select Properties > under Startup Type change to Automatic > click Apply / click Start > OK Reboot. (Worked) But First The Quality Was Not As It Was Before And Then Sound Card Stopped Working Again.
    Try a System File Check
    go to Run - type "sfc /scannow" No Success.
    I have installed windows again but no success. :(
    Here Is The Detailed Model No. Satellite A110-195
    PSAB0E-00F00KAR
    Windows XP Home Edition SP2

    No It Appears In Device Manager And In Control Panel.
    This Method Worked But The Sound Level Was Not As Good As it Used To Be:
    tart / Control Panel / Administrative Tools / Component Services / a separate window will open in left pane click Services(Local) from the tree / Scroll down to Windows Audio service / if the service is Disabled or Manual right click > select Properties > under Startup Type change to Automatic > click Apply / click Start > OK Reboot.

  • Flash Player has stopped working...over and over again!

    I get this message whenever I try and watch a video, same message for any page that uses flash, same message no matter which browser I'm using. This problem began with version 10, and I was using older versions of Flash Player until the other day when it would no longer work due to security issues--the message was that the older version of flash would no longer work...I needed to update the player. So, I did, and we're back to the same problem of Flash Player has stopped working message popping up over and over again. It doesn't seem to be the browsers since I get the same message in all of them. Possibly it is the hardware acceleration, but the two pathways to disabling hardware acceleration don't work.   When I try to see the current version (so I can right click and get to settings), the version won't show. The other strategy, right cliking on the video, also won't work because the video won't show after Flash Player has stopped working. My graphics card is a Radeon x1950, and I'm running 32 bit Vista Home Premium.  There is a ton of information on line about dealing with a balky flash player, but nothing that seems to address this problem. Any help will be appreciated.  Thanks in advance. RAS
    PS, sorry, I wasn't paying attention and first posted this in "installing flash player."
    One more thing....when I go to Flash Player Find Version page, the video does not show up, nor does the version....two big blank spaces.  But Flash Player is installed.

    I replied over on your other post.
    What browser are you using that is giving you the blank spaces on the versions page?

  • I use chrome on windows. Every time I am on Facebook and I am trying to play a game I get a message that says flash player has stopped working. how do i make it work?

    I use chrome on windows. Every time I am on Facebook and I am trying to play a game I get a message that says flash player has stopped working. How do i make it work?

    Hi juderocks14,
    Please first take a check with the other Players and see if they could play the MP4 file normally. If it can't be played, which means it might be corrupted. You may ask at the Bandicam side, or save the files again.
    If issue insists, take a try with the Troubleshooter (For Windows 7, 8 and 8.1):
    Open the Windows Media Player Settings troubleshooter
    Fix Windows Media Player video, and other media or library issues
    Or you may try to turn Windows Features on or off to reset Windows  Media Player:
    Turn Windows features on or off (Before turn it on again, please remember to reboot first)
    More reference:
    What happens if I turn off Windows Media Player?
    Best regards
    Michael Shao
    TechNet Community Support

  • Keep getting a message over and over that Adobe Flash Player has stopped working.

    Keep getting a message over and over that Adobe Flash Player has stopped working.   Uninstalled and then reinstalled. Did not help.

    Hi ebombardi,
    Have you looked at our [https://support.mozilla.org/en-US/kb/firefox-crashes-or-flash-plugin-crashes Flash plugin troubleshooting section]? There is a lot of useful information in there that should help you get to the bottom of your issue.
    Hopefully this helps!

  • I get the error "adobe flash player has stopped working...

    I get the error "adobe flash player has stopped working...something about a data execution.... Can someone tell me why this happens? Would appreciate if you email me at [removed] because I don't  visit this site often.     Thank you

    This is a public forum; please do not post your email address or other private data!  You will get an email notification if someone replies to your topic.

  • Adobe flash player has stopped working how to rectify please help

    adobe flash player has stopped working how to rectify please help

    Can you please tell us your operating system and browser version?  In addition, please try going to this page to see if Flash Player loads and reports its version.
    http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html

  • Flash Player Has Stopped Working!

    All of a sudden, flash player has stopped working on my computer. I have a 64-bit PC, running Windows 7. Flash was running perfectly one day; the next it was not. Hasn't worked since. I've tried downloading the latest version and even installing an older version. Still does not work! (No changes or additions were made to the computer to cause this problem.) Any ideas as to what might be going on and how to fix it? I've done all I know how to do.
    Ron.

    All of a sudden, flash player has stopped working on my computer. I have a 64-bit PC, running Windows 7. Flash was running perfectly one day; the next it was not. Hasn't worked since. I've tried downloading the latest version and even installing an older version. Still does not work! (No changes or additions were made to the computer to cause this problem.) Any ideas as to what might be going on and how to fix it? I've done all I know how to do.
    Ron.

  • 3 weeks after installing Yosemite Flash Player has stopped working

    Hi Apple Community,
    Is anyone else experiencing this problem?
    I installed OSX Yosemite about 4 weeks ago, no problems until now.
    Just this week Flash Player has stopped working on an education site I belong to.
    The college say there's no problem at their end or for the other students.
    I am using Chrome which I understand updates Flash Player automatically; has there been an update this week or something that might have caused this problem?
    I have tried every suggestion I can find on the internet:
    - uninstalling Flash
    - tried using Firefox, Chrome, Safari and Opera
    - installing the latest Flash
    - Rebooting
    - checking Flash is installed (it is)
    Is there anything else I can try?
    Or is Flash simply not compatible with Yosemite now?

    Hi ...
    No problems with Flash on Safari 8 with Yosemite here so try testing with Safari.
    First, make sure Allow Plug-ins is selected in Safari > Preferences > Security
    Then from your Safari menu bar click Safari > Preferences then select the Privacy tab.
    Click: Remove All Website Data
    Now open System Preferences > Flash Player then select the Advanced tab.
    Click Delete All under Browsing Data and Settings
    Then delete the cache. Open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.
    If that doesn't help, troubleshoot Safari extensions.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

  • I have two graphics cards in my PC . after I had to reinstall windows again has been slower pc and stuff not play 4k footage . Can you help me find out about it " Raks " graphics card has stopped working ?

    I have two graphics cards in my PC . after I had to reinstall windows again has been slower pc and stuff not play 4k footage . Can you help me find out about it " Raks " graphics card has stopped working ?

    I'm not aware of any, not to say that there aren't any issues.
    it may have nothing to do with ntpd, there are a lot of things running.
    ntpd just happen to make the log entry at the same time as the panic.
    I would check to see if there are any updates available for you system.
    if this is the first time that this has happened. it may be (pick one):
    cosmic rays
    sun spots
    the trilateral commission
    if this happens more frequently and that traces look the same, then
    there may be a real problem that needs to be looked into further.

  • My debit card has stopped working on itunes, as it is asking for an issue number which my card does not have?

    My debit card has stopped working on itunes, as it is asking for an issue number which my card does not have? I don't know why it is not working.

    Andy ...
    If you are going to use a debit card it you must enter a security code.

  • "Adobe Flash CS5 has stopped working" error anytime i do anything - HELP PLZ!

    Hi there,
    I have used Macromedia Flash MX for many, many moons. Finally, when I got Windows 7, I was VERY excited to get updated on MX and move to Adobe Flash Professional CS5. However, i have never once been able to use this program, as it crashes pretty much every time i try to do anything. However, since my upgrade, i've noticed a lot more crashing in MX as well (i still have it installed on my old HD and have been using it to build videos rather than CS5 since it crashes less frequently). Now, i'm at my wit's end. I get the above error message when i do pretty much anything, but most recently it's EVERY time i try to select all unused files from the library. The error message i get in MX is "Flash 6.0 r25 has stopped working," but it's the same exact problem in the problem signature as CS5's:
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    Flash.exe
      Application Version:    11.0.0.485
      Application Timestamp:    4badda9d
      Fault Module Name:    Flash.exe
      Fault Module Version:    11.0.0.485
      Fault Module Timestamp:    4badda9d
      Exception Code:    c0000005
      Exception Offset:    005c0478
      OS Version:    6.1.7601.2.1.0.256.1
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    If i try to select "Check online for a solution," in MX it just kills out of the program, but in CS5 it gives me a second error before killing out:
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    Flash.exe
      Application Version:    11.0.0.485
      Application Timestamp:    4badda9d
      Fault Module Name:    ntdll.dll
      Fault Module Version:    6.1.7601.18247
      Fault Module Timestamp:    521ea8e7
      Exception Code:    c0150010
      Exception Offset:    0008482b
      OS Version:    6.1.7601.2.1.0.256.1
      Locale ID:    1033
      Additional Information 1:    2865
      Additional Information 2:    2865b1bb537c4d5e61b79207bc968f0a
      Additional Information 3:    2116
      Additional Information 4:    2116da8c99f9527466231198673244ae
    PLEASE tell me there's a way to fix this. I've tried everything I can think of and have to get this video done in the next few days!!!! I would love to be able to start using CS5 and ditch the ancient MX on my slaved drive, but I can't get CS5 to work!
    Thanks.

    3. (Windows) Disable Compatibility Mode. 
         For information on compatibility mode, see Using Windows 7 or Vista compatibility mode. 
    Windows Compatibility Mode can cause errors to occur with Adobe Creative Suite products. To disable it, do the following:
    Navigate to C:\Program Files\Adobe\[application name]. 
    Right-click the product application file and choose Properties.  
    In the Compatibility tab, deselect all options under Compatibility Mode, Settings, and Privilege Level.   
    Click OK, and relaunch the Adobe Creative Suite 5 product. 
    4. Disable startup items and services. 
         Applications running in the background can prevent Creative Suite 5, CS5.5, and CS6 products from launching. For instructions on temporarily disabling these items, see the following documents:
    Disable startup items and Services (Windows XP)
    Restart Windows in a modified mode (Windows 7 and Windows Vista)
    Start the system in Safe Boot mode (Mac OS)
    5. Log in using a new local administrative user account. 
         A new local administrative account can rule out network policies, corrupt profiles, and incorrectly setup administrative accounts as the cause of a failed launch. To create a local administrator account, see the following:
    Windows XP: Choose Start > Help And Support and see the article "Add a new user to the computer," or contact your system administrator.
    Windows Vista/Windows 7: Create new local administrator account (Windows Vista) (kb404912)
    Mac OS: Creating and modifying user accounts on the Apple support website. This video demonstrates the procedure to create a Standard user account. To create an Administrator account, select Administrator in the New Accounts menu.
    6. Delete all Adobefnt*.lst files 
    Search for and delete all copies of the AdobeFnt*.lst file that you find on the hard disk: 
    (Mac OS) In the Finder, choose File > Find (Command + F).
    (Windows XP) In Explorer, click the Search button (Ctrl+F).
    (Windows Vista/7) In Explorer, use the search box in the upper right (Ctrl+F).
    Type Adobefnt*.lst and then click the Search icon. If you have more than one hard drive, only search the system (OS) drive.
    (Windows XP Search Assistant) Choose All Files and Folders. Under More advanced options select Search System Folders, Search hidden files and folders, and Search subfolders.  
    Click within the search results. Choose Edit > Select All, and then drag the selected files to the Trash (Mac OS) or Recycle Bin (Windows).  
    (Mac OS) Choose Finder > Empty Trash.  
    Restart the application. 
    If an Adobefnt*.lst file becomes damaged, it can cause the application to crash, freeze, or quit when you try to start it. Adobefnt.lst files (for example, Adobefnt10.list for InDesign) are font cache files that Adobe applications use to quickly gather and store information about available fonts. If you delete or rename an Adobefnt.lst file, the application re-creates it the next time you start the application.  
    7. Troubleshoot font issues. 
    Remove or disable nonessential fonts and then restart your Creative Suite application. See:
    Reduce the number of active fonts (Windows XP)
    Reduce the number of active fonts (Windows 7 and Windows Vista)
    Troubleshoot fonts (Mac OS)
    8. (Windows) Update your video card driver. 
    Download the latest driver from your video card manufacturer's website or contact the manufacturer for an updated driver. 
    9. Search the knowledgebase for errors. 
    Search the Adobe knowledgebase for any errors that appear:
    Go to the Adobe Support website and choose your product from the Select Product Support Center menu.  
    Type the error into the search field and click Search. 
    Note: Omit file paths and registry keys from the search string.
    10. Run the Adobe Support Advisor. 
    The Adobe Support Advisor is an AIR app that helps identify and resolve installation issues. It can also assist with errors that occur when AMT is running. For more information, see Using the Adobe Support Advisor (kb405816) and Troubleshoot launch errors using Creative Suite launch logs (cpsid_83478).
    11. Perform system troubleshooting steps 
    Follow the steps in Troubleshoot system errors and freezes | Adobe software on Windows (cpsid_82252) or Troubleshoot system errors and freezes | Adobe software on Mac OS (cpsid_82414).

  • Satellite A60-652: ati2dvag driver has stopped working

    Hello,
    Recently I have some problems with my graphics. My satellite freezes up, and goes to a low resolution with a few colours. A message says the ati2dvag driver has stopped working. After rebooting the satellite shows a blue screen and reboots...same thing happens. Only shutting down and retrying after a few minutes gets me back to normal Windows.
    I tried to look for some new drivers, but I can't indicate my model (SA60-652)... is this model too old for updates???
    Toshiba SA60-652
    ATI MOBILITY RADION 7000 IGP
    ati2dvag driver (6.14.10.6430)
    Windows XP (SP2)
    AVG virus scan
    Hitman Pro anti-spyware
    ATI hydravision installed but never used :-/
    Notebook recently has been rising in temperature...I will deal with this after my final thesis (8 may)
    Please can you help me?
    If you can, please be clear in instructions, 'caus I don't know a lot about computers... (PEBCAC)
    Thanks!

    Thank you for this answer,
    I found the driver myself, uninstalled the old one and installed the new one (same driver, so actually just a reinstallation).
    I use the programm Speedfan to monitor my cpu-temp, and I noticed a few months ago that temperature stayed between 60 and 70 degrees. Now my laptop is easily rising to temperatures of about 87 degrees. Think this is the answer... The notebook even completely stopped working suddenly a few weeks ago, due to high temp. I will look into it to clean the fans and stuff. Guess I'll find some more info on that on other forumthreads.
    Thank you for your help
    Jeroen

  • Satellite T130: inbuilt web camera has stopped working

    Hi, I have the same problem of the question bellow, like I have looked around and I was not able to find the answer I need.
    I have a Satellite T130 and, suddenly, the inbuilt web camera has stopped working properly. A blue light is on, but there is no image. What can I do?
    Thank you

    Hi,
    the blue light is beside the web cam, on the top of screen. But this light is on when I try to use the web cam in anywhere, like Skype, Msn or even in programs in the computer that only take a pictue or make a video of you, without ineternet (I do not know the name of this program). But it seems that computer and the programs recognize the web cam, because there is no messages when I turn on the web cam.
    In Skype settings is the same, there is nothing wrong, there is no different message. The only thing is when I try to take picture a message appears: "failed", but the video seems to record normally, although everythng is black.
    Could you understand what I meant?
    Sorry about my english....

  • Adobe r700 flash player has stop working

    I have the most up to date flash player but it keeps crashing still. I uninstalled and reinstalled and still dosnt work and it's in protecting mode and have try to disable protecting mode and still the same thing . Now when I try to load a page with flash it stalls out until it finally crashes some times. I have Windows and it's  been doing this two years now.So how to fix this problem now it's causing blue screen and saying hard ware not fix and can not be updated with  1 detected  ?
    Here some reports Ids
    bp-5b62e477-f2c4-45e8-abe3-4597f2130412
    bp-89856962-1e9f-4960-9ee5-85c852130411
    bp-e83d6773-59b4-4862-afd4-e26702130411
    bp-8f305a27-02fc-4723-a27f-a00cd2130411
    This is what showing up on crash info on my pc of the flash player
    Version=1
    EventType=BEX
    EventTime=130102897802900390
    ReportType=2
    Consent=1
    UploadTime=130102897803623046
    ReportIdentifier=ad6de88a-a3d8-11e2-9bd0-bc5ff4572552
    IntegratorReportIdentifier=ad6de889-a3d8-11e2-9bd0-bc5ff4572552
    WOW64=1
    Response.type=4
    Sig[0].Name=Application Name
    Sig[0].Value=FlashPlayerPlugin_11_7_700_169.exe
    Sig[1].Name=Application Version
    Sig[1].Value=11.7.700.169
    Sig[2].Name=Application Timestamp
    Sig[2].Value=5155fb9a
    Sig[3].Name=Fault Module Name
    Sig[3].Value=NPSWF32_11_7_700_169.dll
    Sig[4].Name=Fault Module Version
    Sig[4].Value=11.7.700.169
    Sig[5].Name=Fault Module Timestamp
    Sig[5].Value=5155fd7e
    Sig[6].Name=Exception Offset
    Sig[6].Value=000b98aa
    Sig[7].Name=Exception Code
    Sig[7].Value=c0000409
    Sig[8].Name=Exception Data
    Sig[8].Value=00000000
    DynamicSig[1].Name=OS Version
    DynamicSig[1].Value=6.1.7601.2.1.0.256.1
    DynamicSig[2].Name=Locale ID
    DynamicSig[2].Value=1033
    DynamicSig[22].Name=Additional Information 1
    DynamicSig[22].Value=389d
    DynamicSig[23].Name=Additional Information 2
    DynamicSig[23].Value=389d5569fec7712bc4af6cc460bf9818
    DynamicSig[24].Name=Additional Information 3
    DynamicSig[24].Value=fd05
    DynamicSig[25].Name=Additional Information 4
    DynamicSig[25].Value=fd058154fb8a8c334279579bcb43a205
    UI[2]=C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerPlugin_11_7_700_169.exe
    UI[3]=Adobe Flash Player 11.7 r700 has stopped working
    UI[4]=Windows can check online for a solution to the problem.
    UI[5]=Check online for a solution and close the program
    UI[6]=Check online for a solution later and close the program
    UI[7]=Close the program
    LoadedModule[0]=C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerPlugin_11_7_700_169.exe
    LoadedModule[1]=C:\Windows\SysWOW64\ntdll.dll
    LoadedModule[2]=C:\Windows\syswow64\kernel32.dll
    LoadedModule[3]=C:\Windows\syswow64\KERNELBASE.dll
    LoadedModule[4]=C:\Windows\syswow64\WININET.dll
    LoadedModule[5]=C:\Windows\syswow64\msvcrt.dll
    LoadedModule[6]=C:\Windows\syswow64\api-ms-win-downlevel-user32-l1-1-0.dll
    LoadedModule[7]=C:\Windows\syswow64\user32.DLL
    LoadedModule[8]=C:\Windows\syswow64\GDI32.dll
    LoadedModule[9]=C:\Windows\syswow64\LPK.dll
    LoadedModule[10]=C:\Windows\syswow64\USP10.dll
    LoadedModule[11]=C:\Windows\syswow64\ADVAPI32.dll
    LoadedModule[12]=C:\Windows\SysWOW64\sechost.dll
    LoadedModule[13]=C:\Windows\syswow64\RPCRT4.dll
    LoadedModule[14]=C:\Windows\syswow64\SspiCli.dll
    LoadedModule[15]=C:\Windows\syswow64\CRYPTBASE.dll
    LoadedModule[16]=C:\Windows\syswow64\api-ms-win-downlevel-advapi32-l1-1-0.dll
    LoadedModule[17]=C:\Windows\syswow64\api-ms-win-downlevel-shlwapi-l1-1-0.dll
    LoadedModule[18]=C:\Windows\syswow64\shlwapi.DLL
    LoadedModule[19]=C:\Windows\syswow64\api-ms-win-downlevel-version-l1-1-0.dll
    LoadedModule[20]=C:\Windows\system32\version.DLL
    LoadedModule[21]=C:\Windows\syswow64\api-ms-win-downlevel-normaliz-l1-1-0.dll
    LoadedModule[22]=C:\Windows\syswow64\normaliz.DLL
    LoadedModule[23]=C:\Windows\syswow64\iertutil.dll
    LoadedModule[24]=C:\Windows\syswow64\CRYPT32.dll
    LoadedModule[25]=C:\Windows\syswow64\MSASN1.dll
    LoadedModule[26]=C:\Windows\syswow64\OLEAUT32.dll
    LoadedModule[27]=C:\Windows\syswow64\ole32.dll
    LoadedModule[28]=C:\Windows\syswow64\IMM32.dll
    LoadedModule[29]=C:\Windows\syswow64\MSCTF.dll
    LoadedModule[30]=C:\Windows\syswow64\SHELL32.dll
    LoadedModule[31]=C:\Windows\system32\USERENV.dll
    LoadedModule[32]=C:\Windows\system32\profapi.dll
    LoadedModule[33]=C:\Windows\syswow64\urlmon.dll
    LoadedModule[34]=C:\Windows\syswow64\api-ms-win-downlevel-ole32-l1-1-0.dll
    LoadedModule[35]=C:\Windows\system32\WINMM.dll
    LoadedModule[36]=C:\Windows\syswow64\PSAPI.DLL
    LoadedModule[37]=C:\Windows\system32\Secur32.dll
    LoadedModule[38]=C:\Windows\system32\MPR.dll
    LoadedModule[39]=C:\Windows\system32\WINSPOOL.DRV
    LoadedModule[40]=C:\Windows\syswow64\COMDLG32.dll
    LoadedModule[41]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_ 5.82.7601.17514_none_ec83dffa859149af\COMCTL32.dll
    LoadedModule[42]=C:\Windows\system32\uxtheme.dll
    LoadedModule[43]=C:\Windows\syswow64\CLBCatQ.DLL
    LoadedModule[44]=C:\Windows\system32\dwmapi.dll
    LoadedModule[45]=C:\Windows\SysWOW64\Macromed\Flash\NPSWF32_11_7_700_169.dll
    LoadedModule[46]=C:\Windows\system32\DSOUND.dll
    LoadedModule[47]=C:\Windows\system32\POWRPROF.dll
    LoadedModule[48]=C:\Windows\syswow64\SETUPAPI.dll
    LoadedModule[49]=C:\Windows\syswow64\CFGMGR32.dll
    LoadedModule[50]=C:\Windows\syswow64\DEVOBJ.dll
    LoadedModule[51]=C:\Windows\syswow64\WS2_32.dll
    LoadedModule[52]=C:\Windows\syswow64\NSI.dll
    LoadedModule[53]=C:\Windows\system32\mscms.dll
    LoadedModule[54]=C:\Windows\system32\mlang.dll
    LoadedModule[55]=C:\Windows\System32\MMDevApi.dll
    LoadedModule[56]=C:\Windows\System32\PROPSYS.dll
    LoadedModule[57]=C:\Windows\system32\AUDIOSES.DLL
    LoadedModule[58]=C:\Windows\system32\mswsock.dll
    LoadedModule[59]=C:\Windows\System32\wshtcpip.dll
    LoadedModule[60]=C:\Windows\System32\wship6.dll
    LoadedModule[61]=C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live\WLIDNSP.DLL
    LoadedModule[62]=C:\Windows\system32\DNSAPI.dll
    LoadedModule[63]=C:\Program Files (x86)\Bonjour\mdnsNSP.dll
    LoadedModule[64]=C:\Windows\system32\Iphlpapi.DLL
    LoadedModule[65]=C:\Windows\system32\WINNSI.DLL
    LoadedModule[66]=C:\Windows\system32\rasadhlp.dll
    LoadedModule[67]=C:\Windows\System32\fwpuclnt.dll
    LoadedModule[68]=C:\Windows\system32\avrt.dll
    FriendlyEventName=Stopped working
    ConsentKey=BEX
    AppName=Adobe Flash Player 11.7 r700
    AppPath=C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerPlugin_11_7_700_169.exe
    Version=1
    EventType=APPCRASH
    EventTime=130101882892587890
    ReportType=2
    Consent=1
    UploadTime=130101882894091796
    ReportIdentifier=60075641-a2ec-11e2-a42a-bc5ff4572552
    IntegratorReportIdentifier=60075640-a2ec-11e2-a42a-bc5ff4572552
    WOW64=1
    Response.BucketId=3518770049
    Response.BucketTable=1
    Response.type=4
    Response.CabId=-690012942
    Sig[0].Name=Application Name
    Sig[0].Value=FlashPlayerPlugin_11_7_700_169.exe
    Sig[1].Name=Application Version
    Sig[1].Value=11.7.700.169
    Sig[2].Name=Application Timestamp
    Sig[2].Value=5155fb9a
    Sig[3].Name=Fault Module Name
    Sig[3].Value=NPSWF32_11_7_700_169.dll
    Sig[4].Name=Fault Module Version
    Sig[4].Value=11.7.700.169
    Sig[5].Name=Fault Module Timestamp
    Sig[5].Value=5155fd7e
    Sig[6].Name=Exception Code
    Sig[6].Value=c0000005
    Sig[7].Name=Exception Offset
    Sig[7].Value=007b588e
    DynamicSig[1].Name=OS Version
    DynamicSig[1].Value=6.1.7601.2.1.0.256.1
    DynamicSig[2].Name=Locale ID
    DynamicSig[2].Value=1033
    DynamicSig[22].Name=Additional Information 1
    DynamicSig[22].Value=0a9e
    DynamicSig[23].Name=Additional Information 2
    DynamicSig[23].Value=0a9e372d3b4ad19135b953a78882e789
    DynamicSig[24].Name=Additional Information 3
    DynamicSig[24].Value=0a9e
    DynamicSig[25].Name=Additional Information 4
    DynamicSig[25].Value=0a9e372d3b4ad19135b953a78882e789
    UI[2]=C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerPlugin_11_7_700_169.exe
    UI[3]=Adobe Flash Player 11.7 r700 has stopped working
    UI[4]=Windows can check online for a solution to the problem.
    UI[5]=Check online for a solution and close the program
    UI[6]=Check online for a solution later and close the program
    UI[7]=Close the program
    LoadedModule[0]=C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerPlugin_11_7_700_169.exe
    LoadedModule[1]=C:\Windows\SysWOW64\ntdll.dll
    LoadedModule[2]=C:\Windows\syswow64\kernel32.dll
    LoadedModule[3]=C:\Windows\syswow64\KERNELBASE.dll
    LoadedModule[4]=C:\Windows\syswow64\WININET.dll
    LoadedModule[5]=C:\Windows\syswow64\msvcrt.dll
    LoadedModule[6]=C:\Windows\syswow64\api-ms-win-downlevel-user32-l1-1-0.dll
    LoadedModule[7]=C:\Windows\syswow64\user32.DLL
    LoadedModule[8]=C:\Windows\syswow64\GDI32.dll
    LoadedModule[9]=C:\Windows\syswow64\LPK.dll
    LoadedModule[10]=C:\Windows\syswow64\USP10.dll
    LoadedModule[11]=C:\Windows\syswow64\ADVAPI32.dll
    LoadedModule[12]=C:\Windows\SysWOW64\sechost.dll
    LoadedModule[13]=C:\Windows\syswow64\RPCRT4.dll
    LoadedModule[14]=C:\Windows\syswow64\SspiCli.dll
    LoadedModule[15]=C:\Windows\syswow64\CRYPTBASE.dll
    LoadedModule[16]=C:\Windows\syswow64\api-ms-win-downlevel-advapi32-l1-1-0.dll
    LoadedModule[17]=C:\Windows\syswow64\api-ms-win-downlevel-shlwapi-l1-1-0.dll
    LoadedModule[18]=C:\Windows\syswow64\shlwapi.DLL
    LoadedModule[19]=C:\Windows\syswow64\api-ms-win-downlevel-version-l1-1-0.dll
    LoadedModule[20]=C:\Windows\system32\version.DLL
    LoadedModule[21]=C:\Windows\syswow64\api-ms-win-downlevel-normaliz-l1-1-0.dll
    LoadedModule[22]=C:\Windows\syswow64\normaliz.DLL
    LoadedModule[23]=C:\Windows\syswow64\iertutil.dll
    LoadedModule[24]=C:\Windows\syswow64\CRYPT32.dll
    LoadedModule[25]=C:\Windows\syswow64\MSASN1.dll
    LoadedModule[26]=C:\Windows\syswow64\OLEAUT32.dll
    LoadedModule[27]=C:\Windows\syswow64\ole32.dll
    LoadedModule[28]=C:\Windows\syswow64\IMM32.dll
    LoadedModule[29]=C:\Windows\syswow64\MSCTF.dll
    LoadedModule[30]=C:\Windows\syswow64\SHELL32.dll
    LoadedModule[31]=C:\Windows\system32\USERENV.dll
    LoadedModule[32]=C:\Windows\system32\profapi.dll
    LoadedModule[33]=C:\Windows\syswow64\urlmon.dll
    LoadedModule[34]=C:\Windows\syswow64\api-ms-win-downlevel-ole32-l1-1-0.dll
    LoadedModule[35]=C:\Windows\system32\WINMM.dll
    LoadedModule[36]=C:\Windows\syswow64\PSAPI.DLL
    LoadedModule[37]=C:\Windows\system32\Secur32.dll
    LoadedModule[38]=C:\Windows\system32\MPR.dll
    LoadedModule[39]=C:\Windows\system32\WINSPOOL.DRV
    LoadedModule[40]=C:\Windows\syswow64\COMDLG32.dll
    LoadedModule[41]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_ 5.82.7601.17514_none_ec83dffa859149af\COMCTL32.dll
    LoadedModule[42]=C:\Windows\system32\uxtheme.dll
    LoadedModule[43]=C:\Windows\syswow64\CLBCatQ.DLL
    LoadedModule[44]=C:\Windows\system32\dwmapi.dll
    LoadedModule[45]=C:\Windows\SysWOW64\Macromed\Flash\NPSWF32_11_7_700_169.dll
    LoadedModule[46]=C:\Windows\system32\DSOUND.dll
    LoadedModule[47]=C:\Windows\system32\POWRPROF.dll
    LoadedModule[48]=C:\Windows\syswow64\SETUPAPI.dll
    LoadedModule[49]=C:\Windows\syswow64\CFGMGR32.dll
    LoadedModule[50]=C:\Windows\syswow64\DEVOBJ.dll
    LoadedModule[51]=C:\Windows\syswow64\WS2_32.dll
    LoadedModule[52]=C:\Windows\syswow64\NSI.dll
    LoadedModule[53]=C:\Windows\system32\mscms.dll
    LoadedModule[54]=C:\Windows\system32\mlang.dll
    LoadedModule[55]=C:\Windows\System32\MMDevApi.dll
    LoadedModule[56]=C:\Windows\System32\PROPSYS.dll
    LoadedModule[57]=C:\Windows\system32\AUDIOSES.DLL
    LoadedModule[58]=C:\Windows\system32\mswsock.dll
    LoadedModule[59]=C:\Windows\system32\DNSAPI.dll
    LoadedModule[60]=C:\Windows\system32\Iphlpapi.DLL
    LoadedModule[61]=C:\Windows\system32\WINNSI.DLL
    LoadedModule[62]=C:\Windows\system32\rasadhlp.dll
    LoadedModule[63]=C:\Windows\System32\wshtcpip.dll
    LoadedModule[64]=C:\Windows\System32\wship6.dll
    LoadedModule[65]=C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live\WLIDNSP.DLL
    LoadedModule[66]=C:\Program Files (x86)\Bonjour\mdnsNSP.dll
    LoadedModule[67]=C:\Windows\System32\fwpuclnt.dll
    LoadedModule[68]=C:\Windows\system32\avrt.dll
    State[0].Key=Transport.DoneStage1
    State[0].Value=1
    State[1].Key=DataRequest
    State[1].Value=iData=1/nDumpFile=//Upload//iCab//7b68e4c1b59841918a5c29551c92a632-5dbda545 8abaa906ce159cc652059f6d-1--776197247-AppCrash32-6-1-7601-2.cab/nDumpServer=watson.microso ft.com/nResponseServer=watson.microsoft.com/nResponseURL=//dw//StageFour.asp?iBucket=-7761 97247&szCab=7b68e4c1b59841918a5c29551c92a632.cab&EventType=AppCrash32&BucketHash=5dbda5458 abaa906ce159cc652059f6d&MID=BFFCD447-13D7-441A-93AF-B4B94630CA0B/nBucket=-776197247/nBucke tTable=1/nResponse=1/n
    File[0].CabName=WERInternalMetadata.xml
    File[0].Path=WER8E92.tmp.WERInternalMetadata.xml
    File[0].Flags=851971
    File[0].Type=5
    File[0].Original.Path=C:\Users\zahmniva\AppData\Local\Temp\WER8E92.tmp.WERInternalMetadata .xml
    File[1].CabName=AppCompat.txt
    File[1].Path=WERAB52.tmp.appcompat.txt
    File[1].Flags=851971
    File[1].Type=5
    File[1].Original.Path=C:\Users\zahmniva\AppData\Local\Temp\WERAB52.tmp.appcompat.txt
    File[2].CabName=minidump.mdmp
    File[2].Path=WERB1EB.tmp.mdmp
    File[2].Flags=2949123
    File[2].Type=2
    File[2].Original.Path=C:\Users\zahmniva\AppData\Local\Temp\WERB1EB.tmp.mdmp
    File[3].CabName=Report.cab
    File[3].Path=Report.cab
    File[3].Flags=196608
    File[3].Type=7
    File[3].Original.Path=Report.cab
    FriendlyEventName=Stopped working
    ConsentKey=APPCRASH
    AppName=Adobe Flash Player 11.7 r700
    AppPath=C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerPlugin_11_7_700_169.exe

    Can you please tell us your operating system and browser version?  In addition, please try going to this page to see if Flash Player loads and reports its version.
    http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html

Maybe you are looking for