Satellite X200-191 - Error message with new BIOS

I have a Satellite X200-191 whit BIOS 2.70 on it when I wont to install Configfree than I get the messege that my laptop is not a Toshiba. And I got the program that you can install from Toshiba that downloads the drivers of your laptop that is not a Toshiba. But when I load the old BIOS 2.50 every thing is good no message that it is not a Toshiba laptop nothing white the same drivers. Is there somthing whit the BIOS update?
It doesn't happen when you update the BIOS from 2.50 to 2.70 only when you have 2.70 and do a clean install of Windows 7 64bit
Greetings

Hello
> But when I load the old BIOS 2.50
How you have installed the old BIOS? Older BIOS versions are not available on Toshiba website and downgrade can only be done from an authorized service provider because special BIOS update program is necessary.
Satellite X200-191 belongs to PSPB9E series so have you downloaded the update for this model or other model (PSPBUE) that would be wrong?
I read about similar messages here in forum and the reason was a replaced mainboard and the ASP did forget to write the DMI information. Did you exchange the mainboard?

Similar Messages

Windows has stopped working error message with new iPad2

Can some one please help me. I have the latest iTunes software 10.4 which has been working fine up to today when i tried to get my iPad2 up and running. I have also updated my iPad to the latest software as well. When syncing either books or photos, the program will work for some time anywhere between 50 & 150 books or 300 & 450 photos and then I get the error message that iTunes has stopped working and windows has shut it down. I am running win7 64bit with 6gig RAM on a HP DV7 laptop.

How much storage space do you have available on your iPad 2? if could by running out of space. Also try restarting your iPad 2 by holding down the on/off and home buttons at the same time until you see the Apple logo.

Satellite X200-20S runs slower with new motherboard

I wonder if anybody can help - under warranty I have just had a replacement motherboard. (Before the replacement the computer switched off within ten seconds of startup). Since replacement the computer is runnning at about 90% of the speed than while it was working pre-replacement. I have spoken with the Toshiba support who claim that without "hard facts" about the speed there is nothing they can do (ie. they won't book it back in). In some ways this is fair, however it simply is not as good as before and various tests I have done (which they claim to be subjective) consistently show that the computer is slower.
Toshiba support really like the Windows Experience Index (WEI) which I currently have as 4.8 - I think this is the same as before the replacement - but I have read that even this isn't that reliable. Can anybody with a X200-20S please tell me their WEI score, and a 3DMark'06 score?
After the motherboard was replaced I also got a new drive (BD-ROM) on E: Of course X200-20S models don't have Blu-Ray so this does show that the motherboard is different to the original, albeit the part number apparently being the same (according to Toshiba support).
I would like to know if anybody else has had a similar problem, and whether they managed to find a resolution. I am aware that the warranty expires in November and therefore must get things done quickly if anything can be done.
If you can help, please let me know.
Many thanks!

Hi Tonny,
Thanks for your suggestion. In all the time I've had the computer I've never bothered changing power management options, so am treating like for like. Since you mentioned it I've just had a look to see what the cpu option is, and it's 100% for the maximum output. However it is running more slowly as mentioned in the previous post.
I am convinced beyond doubt that the motherboard (which is the only thing to be replaced) is the cause of the problem. I have reset the computer to factory settings, installed the latest drivers; everything I can possibly do - and every test (including my memory of how games ran before) proves beyond doubt that the machine is running more slowly.
I simply am at a loss as to how to get the machine back to the previous speed. I can only think it isn't possible because the new motherboard replacements don't work as efficiently as the originals - although with the advance in technology over two and a half years that doesn't seem quite right. I can't get Toshiba support to take this problem seriously, because nothing is "broken". I wonder if it's some jumpers, or settings on the board which weren't done correctly when it was replaced.
Thanks again.

Error Message with new iMessage

I just installed the Beta version of iMessage on my iMac. Then I go through the set up it asks for my apple ID which I enter and it works. Then it asks for my iMessage password. This is the same password on my iPad and iPhone, but it will not work here. Any ideas?

Ok I have a question.
Why do you want to use Beta software? Especially since you are having this problem with it?
Uninstall it and forget about it until it is released as a real piece of software.

My mac book pro does not start but has error message with a question mark on screen. took it in and was told probably the hard drive as could not reconize it so bought new one but still not connecting.what do i do

My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was sure a new hard drive would fix it.So putting faith in someone who deals with them i purchased a new hard drive to find it was still not working although he said the computer did know reconize the hard drive and i may have to send it away to get it checked .After already paying 120 pounds for a new hard drive and they wanting another 80.00 pounds to diagnose it i am a little sceptical.
That's why i am interested on anyone's help.

Welcome to the Apple Support Communities
I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html

I keep receiving a server error message with the new beta version of iMessage. What can I do to fix this?

I keep receiving a server error message with the new beta version of iMessage. What can I do to fix this?

Ok I have a question.
Why do you want to use Beta software? Especially since you are having this problem with it?
Uninstall it and forget about it until it is released as a real piece of software.

Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?

Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?

downloaded new version but I keep getting error message with download.
What does the error message say, andrea? (Precise text, please.)

Satellite X200-191 = Laptop turns on 4 seconds, black screen,humming sound

_*Satellite x200-191*_
Core2 Duo T7700
*Original:* 1024MB + 1024MB Memory 667MHZ / 512MB VRAM *Replaced:* Kingston Kingston KVR667D2S5/2G (I have this 2x)
*Original:* 200GB + 200GB Harddisk Drive (4200RPM) SATA *Replaced:* Only 1 HDD left, other one I will get back in 2 days.
17 WSXGA+ TRUBRITE TFT Screen
HD DVD-ROM Drive
56K Modem / Lan
W-Lan (802.11 A/G/N)
1/3MPixel Web Camera
Bluetooth
Microsoft Vista Home Premium 32 Bit
_*My Problem:*_
I take out the battery, plug it in the power. Charging light turns on.
I press the power button, power led turns on. Followed by the hdd led turn on, which blinks real quick, stays on for 1 second, then turns of. The power led stays on during all the time.
2 seconds after the power button, a fan starts blowing, while the above mention hdd led blinks for 1 second, 2 seconds after the fan starting to blow, it turns off.
We are now 4 seconds farther, pretty much, everything stopts, except a very tiny minor humming sound. (I just left it on for a couple minutes, sound remains, nothing happens.) (While writing this all I left it on for 10 minutes, the laptop heats op a bit, the adapter gets hotter, but still only the very tiny minor humming sound.)
+So my laptop works for 4 seconds, wont give any screen (black screen) wont load even BIOS. What could be wrong ?+
_*Fixing?:*_
Ok so I left the laptop after a couple of months, being told it was dead, just getting it dusty. (Read history to get this)
But since last week, I figured its getting dusty, I never opened a laptop before, why wont I try doing that.
_+*I replaced the Memory modules, Slot A and B , both memories , same time, one at a time, all possible ways.*+_
_+*Since I have only 1 HDD, I used it in both slots. Looks to no difference. Using NO HDD, I do NOT have the very tiny minor humming sound!!!*+_
I followed a guide [http://www.irisvista.com/tech/] to open my laptop, to see what is inside.
Finding no lose plugs, but did find a certein oil, and some white paste.
Closing the laptop, to try it out, I accidently screwed a couple wrong screws in the laptop, piercing the top cover of my laptop, but no chips were hit during this :P (Yeah, Im a bit to strong, I should have figured using force for a couple of the screws wasnt the best thing I could do, but now i know :p)
*SOOO* My question, while I wait for the extra old HDD (getting it in 2 days). (Probably making no difference)
What could be wrong, more precisly. Should I like try taking out the video card or something ?
Is there something I should do with some soldering?
Any tips/tricks that could work, wether to fix the laptop, or to narrow down the problem , to a small part which i could replace ?
BEST REGARDS
Danny Visser
The Netherlands
_*History:*_
Not sure if this is any important, but just to let you know, if intrested what happend all to the laptop ;)
I bought the laptop at Shape Computers (in the netherlands) Asking this laptop mentioned above, with 2 things changed. I wanted more Memory, and I wanted windows XP. The shop told me this was possible. They bought me the laptop in, they replaced the Memory with the kingston memories. They installed windows XP instead of the Vista. They laptop did work at this very moment. So I bought the working laptop, with 1 year warranty.
With the folders extra given with the laptop, I was able to increase my warranty from 1 to 2 years for free, so I did.
After probably a couple of weeks I noticed that the laptop was getting real hot, after longer usage. But according to the manual this was normal.
I did use the laptop for gaming, but also 2 months for a gaming study. So I did take it several times to school in a backpack.
After not using it for school anymore I reinstalled Windows Vista 32 BIT
At a very point not sure when precisly I noticed that it wouldnt turn on (probably same problem as I have now) but I was really relaxed about it, tried it later, and somehow it did work again. This happend perhaps about 5 times in total.
Knowing something was wrong, I took it back to Shape Computers. They checked it. (Not showing me what they did to it) But they told me I had nothing to worry about.
After about 2 years I actually sold this laptop to my mom. She used it a couple times (she is like realy noob, just about computers in generally, not even knowing if she should double click icons or not) She took it with her a couple times on trips, and they after about 2 years and 2 months ... this problem happend.
My mom knows a guy, and a friend of that guy, works alot with broken laptops, which told me that the problem was the _+motherboard+_.
I decided to take it back to the shop. After a long progress being down there (about 6 to 8 weeks)(Me going to the shop like 15 times). The shop managed to tell me it was the motherboard. That the motherboard couldnt be fixed and that a new one would be way to expensive.
+(I Known at this very point, after getting the motherboard back, that this laptop was not screwed open yet. The screws were still brand new.)+
Funny information(not for me), during this period of about 8 weeks, they actually told me lies like ... I left a message at your voicemail, I DONT HAVE A VOICEMAIL ... sorry for the caps but im still xxxxxx about those lies.
So still believing the shop ... my laptop is gone .... dead ... but then since last week, I started looking into the laptop myself ...(Fixing)

Ok, the company did not reply at all ... I ended up sending another email. And they did reply with a automatic message. Now weeks later still nothing more then that auto reply.
While I was waiting I contacted another guy that knows alot from these laptops. Getting a new part would cost me about 300 euros, and thats just the part, not even replace time.
Considering the toshiba help I have gotten ... (pretty much none) in these last years.
I declare my laptop dead. And decide at this very moment, that I (ofcourse) never will buy toshiba hardware again.
I might pay a bit more at my Dell computers, but the support in the last 8 years with 5 different computer systems and 1 laptop. Has been perfect in compare to the toshiba support I have gotten in the last 3 years, which just fails.
Thx tho all you guys for the replys.
Danny Visser

Error message with offer to download the 4.1.B.0.587 update and note: "installation not possible" (because it's already there) cannot partition SD card

Hi - Recently I put the latest update on my LT15i (4.1.B.0.587), after this I rooted the phone, and everything seemed okay. But since then I keep getting an error message with an offer to download the 4.1.B.0.587 update and the note: "installation not possible" (because it's already there). The news line on top shows a red exclamation mark all the time. It seems to me that it is due to this error that I cannot partition my SD card. Does anybody have an idea how to fix that? Thanks much in advance, and happy holidays - nerissa

Moved thread to Android development.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Displaying an error message with a link to the error field

By default, ADF validation usually displays an alert with an error message and a link to the error field.
I have some custom validations where I finally display the error message with this:
public static void MessageError(String messageText){
    //String messageText="No se han encontrado estos datos";
    FacesMessage fm = new FacesMessage(messageText);
     * set the type of the message.
     * Valid types: error, fatal,info,warning
    fm.setSeverity(FacesMessage.SEVERITY_ERROR);
    FacesContext context = FacesContext.getCurrentInstance();
    context.addMessage(null, fm);
My customer is asking for displaying a link to the error field in this kind of error alerts as standard errors do.
Is there any way to get this ?

Can't you include this in your message?
You may want to check Duncan's blog https://blogs.oracle.com/groundside/entry/get_more_from_your_messages whichgives more inside on what you can do
Timo

Error message saying "new itunes library"

downloaded the latest itunes now when i try to open itunes just get error message saying "new itunes library"

Try this approach:
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
If that doesn't work go into the Control Panel for progams and try to repair the iTunes installation, or remove it and then reinstall.
tt2

Just got an ipod touch software version 2.2.1 and everytime I download an app get error message requires newer version of software. Did all updates, and same.

Keep getting error message require newer version of iPod software to install apps on ipod touch v2.2.1. Is there a version limitation for using apps with the iPod touch? Loaded the latest updates etc.

I sounds like yu have a first generation (1G) iPod. You can update that as far as iOS 3.1.3. To get that update go here. You may have to use a different browser to get the sublink to work correctly.
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
Identify your iPod here:
Identifying iPod models

Whenever I try to buy a song on iTunes it gives me an error message with this number:0x800B0101. Help!

Whenever I try to buy a song on iTunes it gives me an error message with this number:0x800B0101. Help!

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

[SOLVED] Error message with GDM 2.20-1

I got this error message with executing GDM 2.20-1 on Arch 64 bit:
gdm-binary[5740]: WARNING:Didn't understand ' ' (expected true or false
What does this error means? and how do in fix it? Thanks in advance for helping.
Last edited by zodmaner (2007-10-14 13:48:31)

About the gdm error:
jgc wrote:
This is caused by the empty values in defaults.conf:
TimedLogin=
I'll remove them from the default configuration file soon, they're harmless though.
About the firefox segfaulting, open a new topic with more information about your problem

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

I replaced the hard drive to a 30gig on my Ipod 4th gen. click wheel but it is still not recognized on my computer or in itunes......I get an error message with a folder and "!"....what can I do to fix??

Have you recharge the battery for at least 2 hours, or just leave it connected for 4 hours?
(When you replaced the Hardisk, you should also replace the battery.)
Some other iPod SSD sites, says that you may have to format the CF in FAT32, as Mac dont read NTFS drive so if Windows is the 1st PC that your CF is connected, it may be formatted to NTFS.
You can try erasing the CF using Disk Utilty, so that Mac can recognise it. (but not Windows)
Have a nice day!

Satellite X200-191 - Error message with new BIOS

Similar Messages

Maybe you are looking for