Satellite X200 20G - Fn pop-up screen doesn't appear anymore

Hello there,
(I made a post on this subject yesterday evening but I cannot find it anywhere.... sorry if both appear later)
I would need your help as the pop-up screen with the Function keys doesn't appear anymore when I place the cursor on the top of my screen....
I don't think I have changed any settings. I have installed the SP1 for Vista but I cannot tell if this is linked.
I found Toshiba "Accessibility", but when I click on the accessibility icon, I get a Toshiba Accessibility Error screen telling "This system, can not use Toshiba Accessibility" ...
Could you please advise?
Thank you,
Guy

HI!
I Have a X200-212 running Vista w/out SP1.
When I was upgrading drivers(after i buy it) i somehow lost the FN function and the popup toolbar. That happened after i installed or update(dont remenber) the toshiba bluetooth stack.
I unisntalled the toshiba bluetooth stack and installed the windows vista bluetooth support as an alternative, and the FN thingy started to work again.
But in your case im guessing its something related to the sp1 ?:| ,lets see if Toshiba updates the X200 drivers to support the Vista SP1.
Cheers

Similar Messages

  • Satellite X200 20G - Fn keys pop-up screen doesn't appear anymore

    Good morning, I hope you could help me on the following:
    I have just noticed that when I place the cursor at the top of the screen, the pop-up screen with the functions keys no longer appears...
    What did I do??? I don't think I have made any change to the settings.... I have installed the Vista SP1 but I couldn't tell you if the problem has just followed this installation (sorry). I usually don't use this functionality, I would even say that usually it annoys me a lot, but now that it doesn't work anymore, I miss it and I would say I discover a lot a usefulness to this feature...
    How to get it back? That is the question.
    I have looked in the Toshiba screens, I found Toshiba "Accessibility", but when I hit this icon I get a 'Toshiba Accessibility Error" pop-up screen telling: "This system can not use "Toshiba Accessibility" ".
    Could you please advice?
    Thank you
    Guy

    Hello *marina4000* , first of all thank you very much for coming into my post.
    Second, I really think you have identified the area where the problem is.... I would have never looked into the "flashcards" area as to me this was related to memory cards...
    You were right, I found in the Toshiba folder, Utilities, the Flashcards related topics. I hit "Restart Flash Cards" and the bar at the top of the screen appeared again, GREAT!....
    But, as unfortunately there is a "but", the bar didn't appear at the next boot. I went back to the menu and found a line called "Settings for Flash Cards". It opened me a window where I found a box called "Disable all functions keys" but it was unchecked. I then checked this box, hit OK, then again uncheck it and clicked OK and the bar appeared, but again, at the next boot, it was not present...
    It looks as if this is the right direction to dig into, but there is still something to fix so the bar is loaded at boot time.
    I am hectic to read your next post!
    (thank you again)
    Guy

  • Installing a second operating system (Windows XP) on a Satellite X200 20G

    Hello everybody, I would need your help on the following:
    I know lot of posts describe parts of what to do (I spent sometimes on then), but I would like to limit at maximum the risks so I am looking for the most simple and exhaustive guideline for this change.
    Why XP? Just because I run lot of astronomy hardware and software,and, well, Vista is not ready yet...
    I am happy with Vista for other uses so I will keep it, install XP on the second hard drive and make a dual boot.
    First fear: will I have all the appropriate drivers to jump?
    I run a Satellite X200 20G PSPB9E-02G021FR and I have found on the Toshiba support site "some" drivers for XP, but it looks as if the display (at least) is missing...
    ==> 1) could you pls give me a link to a page which lists all the drivers for my specific system?
    ==> 2) could you pls point me to a post which describes the steps to follow?
    ==> 3) it looks as if nLite is the right choice to make the XP installation CD, but I assume I could not just launch it under Vista and capture my drivers for XP, is this right?
    Thank you very much for your help
    Guy

    > {quote:title=Gipsyman wrote:}{quote}
    > The XP BIOS for the X200-G20 was not released. I didn??t find any XP BIOS for this notebook series on the Toshiba European driver page.
    > Please note that you can use only the BIOS which were designed especially for this notebook series!!!
    Well, excuse me *Gipsyman* I surely don't want to be a pest, but the need to install XP on the Toshba X200 20G (for example) is not a dream, it is a hard reality and in Europe I know tens of people (if not much many) who had to do so because their preloaded Vista was not at all answering their needs, and there was no longer Toshiba laptops available preloaded with XP.
    I am member of a forum which is dedicated to the Toshiba X200, I can tell you that we love our Toshiba and are very happy ( /proud ?) of it and I am not sure how many have kept the original platform, but definitely it's very few.
    By the way, Toshiba releases 32 drivers for XP in his European download page, so this does not happen by chance.
    In fact lots of people are wondering for the BIOS compatibility under XP, so my purpose, asking this question earlier in this post, and trying to make our position clear in this one, is to make the part between what is the theory: e.g. "The Toshiba X200 is preloaded with Vista, all changes to XP is under customer responsibility and at his own risks" (let me smile a bit here as Thoshiba still kindly provides XP drivers....) and the reality: e.g. "hei guys!, be careful, if you update your BIOS while you are running XP, you take the risk to break something".... see what I mean?
    I hope this clarifies what I (my European friends and I) need to know: what is the real risk of making BIOS updates while our laptops are running XP because we had to.
    Pls, again, don't see anything aggressive in my lines (I really appreciate your help), just a willingness to make things clear.
    Guy

  • Satellite X200-20G: Question about BIOS 2.20

    Hello,
    Could you please bring me some lights on the warning which introduces the BIOS 2.20 upgrade:
    *!!!* Upgrade the BIOS from Windows XP BIOS V5.10 only to VISTA BIOS V2.20 or higher *!!!*
    Mainly I am interested in understanding what is the relationship with XP.
    I have a Satellite X200-20G with the first hard drive loaded with Vista (default configuration) and a XP Home edition on the second Hard drive and I use the BIOS menu to boot on one side or the other.
    Thank you
    Guy.

    Hi
    On some notebooks the BIOS must be updated to the XP version if the Win XP OS was installed.
    The warning message says that if you have already updated the BIOS to XP version 5.10 then you could update it again only to the BIOS 2.20 Vista version.
    But it looks like the XP BIOS version for Sat X200 doesnt exist at this time and in my opinion you could overlook this ;)
    Best regards

  • All of a sudden my screen doesn't respond anymore? i-pad 2.

    I turned on my i-pad 2 and now the screen doesn't respond anymore. I got the slider to unlock it, to move once, but that was it? Help?
    Thanx in advance
    Tim

    Did you drop the iPad?
    Yes, a wireless keyboard will work with the iPad, but you'll need the iPad to work so you can set it up.
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • The Cluster Node Selection screen doesn't appear installing  RAC 9i

    The Cluster Node Selection screen doesn't appear installing RAC 9i with OCFS on Windows 2003
    We are using patch #2878462 OUI 2.2.0.18.0
    The Oracle Cluster check was successful !

    more info ...
    We are following the doc. id. #178882.1 "Step-By-Step Installationg of RAC with OCFS on Windows 2000" instructions.

  • If i selected to "Create a new backup" and then cancelled that option but want to go back and select "Inherit backup history"; how do i go back and do that since now when i plug in my HD, that option doesn't appear anymore?? Any Help?

    If i selected to "Create a new backup" and then canceled that option but want to go back and select "Inherit backup history"; how do I go back and do that since now when I plug in my external hard drive, that option doesn't appear anymore?? Any Help? I bought a MacBook Air, but decided to return it for the newest model, and I wanted to back it up so that I can then back it up on my new MacBook Air. I didn't understand the option to Inherit or start a new back up, and therefore selected the option to create a new backup. I believe I should have selected to Inherit backup history so that when i back it up on the new MackBook Air, it appears the same as the one I'm returning.... Is there anyway that i can re-select the option to Inherit backup history for time machine?

    Thanks for sharing this link.
    I've posted a question here https://discussions.apple.com/message/22049103#22049103 describing my situation. Are you able to suggest me the right option?

  • I-Pod touch doesn't appear anymore

    Hi , Yesterday I did the update for i-tunes and since my I-Pod doesn't appear anymore when I connect it ...   I tried a few things suggested on apple but still doesn't work . I have a pc on windows 8 and i-pod touch 5gen . WHAT do I do ???   HELP ME PLEASE !!!     thanks for your help in advance .

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • 6 year-old battery makes horrible sounds, the charging light doesn't appear anymore

    Hello!
    My battery (and my laptop HP Pavillion zt3019ea) are 6 years old and for few weeks now my battery has made horrible sounds (like a loud mosquito) when connected to the charger. When it's not connected to the charger the sounds stop but it looks like the battery hasn't been charged at all.
    The charging light doesn't appear anymore, or very rarely.
    Is it the end??!
    Is it worth buying a new battery for a 6 year-old laptop (i already changed the hard drive few months ago)?
    Thanks a lot!!!
    Marine.
    This question was solved.
    View Solution.

    I will definately recommend buying a new battery for the unit since you still work on your notebook.
    It is bettery to buy geniune spares from HP than buying third party spares as you will have a warranty on the battery purchased.
    Although I am an HP Employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

  • Pop-up screen does not appear for inspection point- In-process inspection

    Hi,
    We havs set up inspection points( time-based) in the master recipe. In that inspection point , we have defined date,time and inspector name as 3 fields to be maintained , before the results recording can start for each characteristic.
    Even though the inepction point is assigned in the header QM data of recipe , system does not give the pop-up at all to record the date , time and inspector's name.
    Please let me know what settings might be missing to get this pop-up screen to record the inspection date,time and inspector's name.
    Regards,
    Manohar

    The Sampling procedure with free inspection points radio button is chosen. However, we are not getting the pop-up screen of QE11.
    What we are trying to get in QA32 , is when we click on "results recording" push button , we want to get QE11 screen to pop-up so that the inspector's name and date and time are recorded , before the results recording screen comes.
    Please suggest whether this is a personal setting or master data setting or config setting or some exit to be used.
    Regards,
    Manohar

  • The initial white screen doesn`t appear, but the computer starts normally.

    Hi, I'm worried about something. I have a MacBookPro 15 ", and since yesterday when I turn it on, the initial white screen, with the loading bar, doesn`t appear. At first everything is black and then the computer turns on normally.` That is not normal, can anyone help me?

    Yes, I normally get this white screen when I turn the machine on. Whithout seen nothing behind it. But now is not appearing anymore. I turn it on > everything goes black (should be white with the apple and the loading bar) > then the screen of the user and password to access the computer appears normally.
    What can this be? I searched in the internet, and found nothing. I`m hoping to find the solution here.

  • Pop Up Menu Doesn't Appear

    Hi, I put together a navbar in Fireworks and added a 6 item
    vertical pop up menu to one of the buttons. I used the advice from
    http://www.adobe.com/devnet/fireworks/articles/fw8_popups.html
    I did it once and it worked fine, then had to redo it in
    Fireworks and re-exported it to DW based on the instructions above.
    Now the pop up menu won't appear when I preview the revised webpage
    that includes the new navbar. When I preview the navbar in
    Fireworks or DW everything's fine so I seem to have built it
    correctly in FW. The problem seems to just be when I add it into
    the webpage in DW. I'm using Insert > Image Objects >
    Fireworks HTML and select the htm file that was created by the
    export but it won't work!! I get the proper rollovers for all the
    buttons but not for the one with the pop up and no pop ups at all.
    Also, when I insert it into the webpage in DW design view I get the
    buttons randomly separated by spaces across the cell (but the
    positioning is fine when previewed) and all of the pop up submenu
    items appear below it as name anchors.
    Anyone have any tips?

    Show us your page. My article just didn't go far enough to
    warn people not
    to use these menus....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "maitlandclark" <[email protected]> wrote in
    message
    news:epj6m2$kni$[email protected]..
    > Hi, I put together a navbar in Fireworks and added a 6
    item vertical pop
    > up
    > menu to one of the buttons. I used the advice from
    >
    http://www.adobe.com/devnet/fireworks/articles/fw8_popups.html
    >
    > I did it once and it worked fine, then had to redo it in
    Fireworks and
    > re-exported it to DW based on the instructions above.
    Now the pop up menu
    > won't
    > appear when I preview the revised webpage that includes
    the new navbar.
    > When I
    > preview the navbar in Fireworks or DW everything's fine
    so I seem to have
    > built
    > it correctly in FW. The problem seems to just be when I
    add it into the
    > webpage
    > in DW. I'm using Insert > Image Objects >
    Fireworks HTML and select the
    > htm
    > file that was created by the export but it won't work!!
    I get the proper
    > rollovers for all the buttons but not for the one with
    the pop up and no
    > pop
    > ups at all. Also, when I insert it into the webpage in
    DW design view I
    > get the
    > buttons randomly separated by spaces across the cell
    (but the positioning
    > is
    > fine when previewed) and all of the pop up submenu items
    appear below it
    > as
    > name anchors.
    >
    > Anyone have any tips?
    >
    >
    >
    >
    >

  • My ipod nano 6th gen doesn't appear anymore in iTunes since firmware update.

    My IPod nano was upgraded to the firmware update to 1.2. 
    I've lost all my music on it during the firmware upgrade (not sure this is normal).
    I can't see it anymore in ITunes.  I got some windows blue screen when trying to solve the problem.
    I've tried to uninstall-reinstall all Apple products on my windows 7 (following the apple support, with bonjour, quicktime, ...).
    I've also tried to connect it on 2 other fresh windows machines, but it doesn't appear either ...
    I've tried with other software but impossible to use because the first libray must be created with iTunes.
    The iPod seems normal and the screen is reactive ... but I can't use it without any music on it.
    I've reset my ipod with no luck. Tried in disk mode also, .... what can I do more ?
    I cannot restore it because it's not visible in iTunes.
    Many thanks for your help !

    flacaasampson wrote:
    I have already tried the troubleshooting through Apples website, I need to know what to do next because NOTHING has worked this far.
    Thanks!
    No can do.  You haven't told us what you have done!  

  • BTMM orange. Miniserver doesn't appear anymore.

    We used to have a perfect working file sharing server that we could access as well locally as remotely. For about one week now, the miniserver doesn't appear when connecting remotely anymore. This started to happen after I accessed the server to do two things
    1- Upgrade to 10.6.7
    2- I kept receiving a "Miniserver.local certificate is void" or something of that style. So I went into the certificate manager and tried to update the certificate, didn't really manage to, probably did something stupid... whatever
    The point is that from that moment I could not access the server remotely anymore.
    Any suggestions (apart from going back to school and learn more about unix based servers, which I will not do...

    ¿Chile? ¿Qué hora es? Might those recent daylight saving time (DST) changes for your timezone be involved here?
    Pending an update from Apple, y'all probably need to [update your timezone rules|http://juretta.com/log/2007/10/05/newzealand_daylight_saving_time_change_mac_os_x_andjava> to match the current scheme for the switch-over.
    Do have a full disk backup before making these changes, just in case.
    And FWIW, if using Miniserver.local as your DNS host name for your server (outside of Bonjour), then that tends to cause things in DNS to go wonky; that .local top-level domain (TLD) is best left exclusive to Bonjour, and you'll want to establish your own DNS services in your own registered domain or (less desirably) in a completely bogus domain. Multicast DNS (mDNS, Bonjour) doesn't mix all that well with unicast (classic) DNS.

  • Satellite A300 - Function taskbar doesn't appear anymore on Windows 7

    I have problem with FN button. It was worked when the operating system was vista, but after I upgrade my operating system to Windows 7 the function task bar that should appear at the top of screen when I press FN bottom does`t appear!
    So, can you tell me how I can solve this problem, please?
    My Laptop mode is Satellite A300-29N

    Hi
    I had the same problem after upgrade to Windows 7 but the solution was pretty easy: I have searched a little bit here in forum and founded out to install the newest Toshiba Value Added Package.
    You can download it here:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Check this!!!

Maybe you are looking for