Satellite x200-252 USB Hub driver

Hi.
I removed USB Host Controllers and USB Root Hubs from the device list of device manager. After restart system, USB Root Hubs is not installed properly, but as "unknow devices". It works, but vista is trying to find properly driver, but unsaccesfully (after every restart, after input any usb device...).
Thanks for help
I HATE VISTA

Hello.
Have you already tried to reinstall the chipset drivers? Normally those install this needed USB driver.
Check the Toshiba download page here:
http://eu.computers.toshiba-europe.com (Support & Downloads)
Select your notebook model and Vista as your operating system, download driver, install it, and restart you machine.

Similar Messages

  • Satellite X200-252 and Vista sound mixer problem

    Hi,
    My Satellite X200-252 is running under Vista Home Premium operating system.
    I have strange problem with sound mixer. After (I think) some security patches applied my vista stopped from recognizing the sound device.
    The taskbar sound icon on the right side of the screen is marked with red cross and while im clicking the icon the info-window states that there is no sound device connected.
    When I select the properties, I see all 3 output devices, i.e. internal speakers, hdmi and digital output. However no icon is displayed in the window. But the configuration is working.
    Moreover the keyboard shortcuts as well as touchpad works as expected. I mean I can mute/unmute etc..
    But I can not change the volumes per channel. For this I need the mixer app.
    What I can do to repair my comp?
    /Arek

    Hi
    In your case I would recommend reinstalling the sound driver.
    As far as I know this notebook supports an Realtek sound card.
    You could visit the Realtek website and could download the sound driver directly from this page.
    You need an HD sound driver.
    Greets

  • My USB hub driver is not installing on my macbook pro windows 7 partition ?

    hey there, my USB hub driver is not installing on my macbook pro windows 7 partition .. any clue?

    yes am talking about windows 7 on my mac pro ... i did the following troubleshooting steps but no use and still the device is not recognized.
           - i changed the usb port .
           - i changed the hub it self .
         - i seaarched online for the driver automatically
            - i searched online for the driver manually ie. hardware id ..
             - i checked the connections,,
    anything else should i do ??

  • How to install recovery image on Satellite 5200 using USB DVD drive

    Hello,
    I have this problem with a Satellite 5200-902 that has the DVD-ROM corrupt and I don't find the part to change. (model DVD: uj-810b)
    But I would like to reinstall the notebook with the CD recovery and I don't be able to enter in the BIOS for change the boot order and start with a USB DVD-ROM.
    I removed the HDD and reinstall the WXp Prof by another machine but when I restart the 5200 I read this message " errore nel caricamento del sistema operativo".
    When turn on I press F2-F10-F12 but if I select another peripheral for boot the notebook start only by network.
    Can you help me to recover this notebook by an external USB DVD-ROM?
    Thanks
    Andrea

    I have an usb floppy drive model ibm TEAC FD05pub, I think it's incompatible or the notebook don't has the power in the usb port because the led of the floppy is of.
    When I tried to press ESC + F1 in the bios I set only the date and the password but no the boot order and other function.
    I really do not know what to do and how to solve.
    I can not execute any BIOS update I can only do so because the boot from network or DVD-ROM (unfortunately broken).
    I installed the operating system by connecting the hard disk on another machine but when I go to connect to my notebook S5200 gives me error.
    Andrea

  • Iodata GUH284R card reader / usb hub driver?

    I just bought an Iodata card reader / usb hub to use with my new iMac. According to the manufacturer it works with OSX, but they don't provide a driver for for anything above OSX 10.2 on their web site. As a hub, it works great, but it doesn't seem to 'see' the memory cards. The cards are formatted in Fat16 by the camera. Is this a problem? This is my first Mac so it could be that I'm missing something obvious.
    iMac G5 (Intel)   Mac OS X (10.4.5)  

    I have a Sandisk card reader and I do not need any drivers to make it work. Normally OS X will detect those thinks without any additionnal drivers.
    Have you tried it on another computer? Maybe the card reader portion is just not working.
    I suggest you contact IOData support and ask them.

  • Satellite X200-22U - FN key driver for Windows 7?

    Hi all!
    I use a Satellite X200-22U notebook, and I want to install Windows 7 32bit on it.
    The problem is, that my FN key functions don't work.
    They worked fine with the factory installed Vista, but the multimedia keys were dead.
    Now, under Win7 my multimedia keys are working fine, but the FN key functions are dead.
    I installed almost all the drivers (Value Added Package, Controls, Flashcard, Assist, Chipset, Bluetooth, etc.) but some of them is available only for Win XP, some others only for Vista, there is no Win7 support. Despite this (as I see) my only problem is the FN key support. I want to switch the displays, set the brightness, mute the speakers, so it's problem.
    My tfncky.exe doesn't run under Win7 and I got a message about it after startup.
    Is there any newer version available for Win7, or can I use the driver(s) of an other notebook?
    Could you help me?
    Thanks,
    McLawrence

    Hi mate
    Ive got a older notebook and the Win 7 drivers were not released for my series.
    I downloaded simply the Value Added Package and Flash Card Support Utility from the Toshiba European driver page: chosen the tools which were released for Satellite L500 series.
    I installed first VAP and after new reboot I followed with Flash Card installation.
    After second reboot I tested the Fn buttons and could get this functionality and the control bar appeared at the top of the display.
    You could also check if you could restart the Flash Card in All Programs > Toshiba -> FlashCard restart

  • Satellite X200-253: Need BIOS driver

    Hi
    I have a X200-253 and I need bios driver but not BIOS.ROM only BIOS.WPH.
    Can you help me
    Message was edited by: chowano

    Why do you want this specific file?
    It is enough to perform BIOS update via the setup file provided in the BIOS package you can download from Toshiba download page.
    Just tried and downloaded this package and it contains only setup.exe and rom file.
    I think there is no way to get this file you want, as it is not included.

  • Satellite X200-252 - Toshiba hardware utility - cant launch under Win7

    I have installed HW utility, I can see its icon in Toshiba Assist but it doesnt launch. I see in task manager process "control.exe" appears for a sec. I tried launch it as admin, tried with vista compatibility but no luck. Anybody has it working under Win 7?

    You have installed Vista version of Toshiba HW Settings?
    I don't know if this will help but try to remove preinstalled version from the system and try to install Win7 version for other notebook model like Satellite P300. Maybe it will work.
    Problem is that Win7 drivers, tools and utilities are not available for your notebook model.

  • Can I use a USB hub to connect more than 1 hard drive/flash drive device to the EA4500?

    Can I use a USB hub to connect more than 1 hard drive/flash drive device to the EA4500?

    That's not possible, it was designed to handle one device at a time. 
    I don't work for Cisco. I'm just here to help.

  • Setting up a USB external Drive with USB Hub on Airport Extreme

    I have successfully hooked up the Airport Extreme Base Station (n) with two printers using a USB Hub. I am now trying to hook up an external hard drive(acomdata 250 gb). When I plug the hard drive into the Hub and turn the drive on the Airport Extreme Base station resets to amber and flashes green for a second then resets to amber again and it keeps doing that until I shut the drive down. I have a Mac Book Pro and an iMac on the network as well as a HP pavilion a730n on the network. I am able to share files between the PC and the Macs; however I can't seem to share the external hard drive. I tested the external hard drive by hooking it up directly to the Mac book and after a few seconds it mounted correctly and I was able to read and write.
    Any help with this would be greatly appreciated.
    Thank you.
    Nick

    I have successfully hooked up the Airport Extreme
    Base Station (n) with two printers using a USB Hub. I
    am now trying to hook up an external hard
    drive(acomdata 250 gb). When I plug the hard drive
    into the Hub and turn the drive on the Airport
    Extreme Base station resets to amber and flashes
    green for a second then resets to amber again and it
    keeps doing that until I shut the drive down. I have
    a Mac Book Pro and an iMac on the network as well as
    a HP pavilion a730n on the network. I am able to
    share files between the PC and the Macs; however I
    can't seem to share the external hard drive. I tested
    the external hard drive by hooking it up directly to
    the Mac book and after a few seconds it mounted
    correctly and I was able to read and write.
    Any help with this would be greatly appreciated.
    Thank you.
    Nick
    What version of the AE firmware are you running? If you upgraded to 7.1, LOTS of people have discovered that Apple broke the USB connectivity for both disks and printers big time. With the 7.1 firmware version a few people can see the disks, but most people CANNOT see the printers.

  • Why do USB drives plugged into USB hubs make my Mac Book Pro (Retina late 2013) wake from sleep?

    I have 2 x USB hubs, a Logitech USB 2.0 hub and a Broway USB 3.0 hub. Tested both and both seem to be the cause of my late 2013 Mac Book Pro waking from sleep. I ran syslog to find out why (syslog |grep -i "Wake reason") and the reason I got back was "kernel[0] <Notice>: Wake reason: XHC1" - this means nothing to me, but it didn't take too much mucking about to hunt the problem down and figure out it was the USB hub with any USB drive attached. If the drive is attached directly to the computer. No problem, computer sleeps fine.
    This was a problem I encountered (and never solved) with OSX 10.6.8, a 2008 Macbook Pro the same Logitech USB 2.0 hub, but with different drives. I put the problem down to a bug that never got solved in an old system. But I am simply AMAZED after my update to a new MBP and new system that it is still about almost 6 years, a dozen MBP's and 4 systems later.
    The other problem is that not only does the USB drive/ USB hub combo wake the computer it also loses the drive upon sleep and mounts it again upon wake. Then repeats this process every couple of minutes. And it obviously doesn't eject the drives properly because each time I return to the computer after I put it to sleep or let it go to sleep I get a giant list of "Disk Not Ejected Properly" notifications about it. Which I'm guessing could eventually cause some file damage.
    I've tried combinations of different drives, different hubs (a Belkin and a no-name Chinese brand 2.0 hub) and the problem persists. Is there a solve to this problem? I'm surprised to see so little posts on forums about this. Am I just unlucky and got another combination of faulty/problematic hardware, or is this a real problem that exists for everyone? If not I would love to know if people have found winning combos of USB hubs and drives. But if it is, then it HAS to be solved.
    If you have a Macbook Pro, then you are limited to 2 USB outlets, this is obviously a bare minimum and I would say that 95% of people using their laptop computer in the office or at home have a hub, and very likely a USB drive attached to it. I know actual Apple reps don't really pay much attention to the community support posts, but I've got 6 months worth of Applecare left and would like suggestions about how to get Apple's attention about this problem.
    BTW Jettison (a 3rd party app that ejects drives properly before sleep) is not a solve. It is a 3rd party app that tries to fill a hole in a broken system. I don't want to eject my drive upon sleep, I want it to got the **** to sleep.

    Is there a pattern to the time of day or other detail that may be
    traced back to a OS X system cause of this odd phenomenon?
    Are there any copies of system files on any of the attached USB
    external drives? Any libraries, such as iTunes, iPhoto, etc?
    Once the drives are indexed by Spotlight, are their permissions
    ignored by the OS X? Content, if neutral, should not affect the
    wake or sleep cycle; especially if they're ignored by the OS X.
    Could there be a bad cable or other component? If so that would
    be a difficult process of elimination to detect it. Usually replacing
    most suspect components in the USB stream (external to Macs)
    is a rote way to mechanically test that idea; & not 100% sure.
    Does the equipment all have a good ground to the utility or house
    electrical field? An intermittent ground may affect more than sleep.
    Hard to say at this point. Maybe a late-night talk radio guru on
    remote viewing could peer into your situation and sleuth it out?
    Sorry to have run out of ideas, but the process must be electrical
    & mechanical to some extent. - Or perhaps odd software inspired.
    Do you have any phone-home spyware items inside, just jumping
    at the chance to spill your information? Little Snitch may help.
    PS: Perhaps the computer needs to go into Apple & have a genius
    or product specialist at AASP test the unit thoroughly... BlueTooth?
    see:
    https://www.google.com/?gws_rd=ssl#q=Wake+reason:+XHC1
    Good luck & happy computing!
    edited 2x

  • External Drive won't show up when connected to Airport via USB Hub

    I just got a new external HD and hooked it up out of the box. There were no problems until I tried copying 117 files to it. An error was encountered (Couldn't complete command due to something or other) and after that I never showed up on my computer again. I tried rebooting... hooking it up directly to the computer...the whole bit. Nothing.
    So I then hooked it up to our laptop. It was found, I erased it, hooked it up to the desktop... it was found there as well... but whenever I hook it up wirelessly via the USB Hub and Airport... I can't get it.
    Everything else that's hooked up to the hub is still working wirelessly (Printer Internet).
    Is this an isssue with the drive?

    Ya' know.. I'm not totally sure. I went to Airport Utility... selected my base station, clicked on Manual Setup... clicked on Disks and saw that my USB Drive was listed. After that I opened the finder, went to network, connected to my base station from there and my USB Drive popped up and I mounted it.
    It's been working fine since.

  • Time capsule won't recognise external hard drive, even when formatted correctly and connected to a powered USB hub

    Hey
    i have an apple time capsule (not the very latest one, but the one before that) and i am trying to connect my 1.5TB toshiba hard drive to it. i understand that it needs to be powered, so i purchased a usb hub ("usb hub man" by Gadget Geek) and bought an adapter to power it.
    The hard drive won't show up in finder or disk utility, however i can see it in airport utility.
    it is formatted correctly - Mac OS Extended (Journaled, Encrypted) and works perfectly fine from my macbook pro usb port.
    Also, when i connect a smaller hard drive to the hub (16GB) that shows up in finder as normal.
    so it seems that everything is perfectly fine, however this 1.5TB hard drive just wont show up in finder.
    Does anyone have any suggestions as to why this is the case? my guesses are that i need to get a better quality usb hub, or that i might have to get a powered hard drive altogether rather than trying to power it with the hub.
    Thanks

    The hard drive won't show up in finder or disk utility, however i can see it in airport utility.
    You would not expect it to show up in disk utility .. it does not work on network drives.
    Finder may or may not be able to see it.
    If the airport utility is showing the drive you have some possibility.
    Did you GUID partition the drive .. or is it still MBR.. ie if it was originally formatted for PC it will be MBR and won't work.. so put it on the Mac again and change the GUID partition.. I would also set a smaller partition size.. the internal drive of the TC is partitioned though you cannot see them.. put a first partition less than 1TB and see how it goes.
    In finder.. don't forget ML has issues with network drive.. make sure you tick all the extras in finder preferences.. and if the drive won't mount try to do it manually.. go .. connect to server.
    AFP://TCname or TCIPaddress.. where you use the actual name or IP.
    Also is the power supply for the hub at least 2A preferably more.. so the hub is powered but the disk is not powered??

  • Can I use Airport Express to connect to a printer, Time Machine Back up drive, second b/u drive, and scanner through a USB hub? if so, how?

    I have an Airport Express that connects to my printer. I'd like to add a scanner, and two back up drives (one for use with Time Capsule, another specifically for photographs backed up from Adobe Lightroom.
    The printer connects to the Airport Express through a USB hub and is recognized.  I cannot get the scanner nor either of the back up drives to be recognized.  Is there a way to do it or will I need to rely on a USB hub wired to the USB port of the MacBookPro?  If it is possible, can you walk me through the set up for each? 
    Thanks,
    Doug Earle

    I'd like to add a scanner, and two back up drives (one for use with Time Capsule, another specifically for photographs backed up from Adobe Lightroom.
    Unfortunately, the USB port on the AirPort Express will only work with a compatible printer.
    It will not work with a scanner, copier, or hard drive.
    It should be possible to do what you want by connecting a powered USB hub to your Mac and then connecting the devices to the powered hub.
    The setup for the scanner and hard drive would be covered by the manfacturers documentation, so providing specific advice for those types of products would be outside the realm of this support area.
    But, if you can provide model numbers, it is always possible that another user who is using those products might see this post.

  • Do i need a powered usb hub to connect my external hard drive and printer to my airport extreeme

    I tried a usb hub from Belkin that is not powered. Is this why I cannot get my hard drive to work on my Airport Extreme?

    I am assuming that you are using the newer "square" version of the AirPort Extreme, not the older "round" version.
    The USB port on the AirPort Extreme is under powered. I have had to use a powered USB hub with any type of hard drive that I've ever used on the Extreme, even if the drive had its own power supply.
    You might want to also check to make sure that the drive is formatted in Mac OS Extended (Journaled) or MS-DOS FAT32. The normal Windows format of NTFS will not work at the AirPort Extreme.

Maybe you are looking for