Satellite X200: The cloned image on my TV is out of scale

Ive connected my x200 laptop to my plasma TV through a HDMI cable.
After much deliberation I managed to figure out how to get the sound working through the TV.
However the image which appears on the TV is slightly out of scale. i.e. the image on the TV is slightly too large, therefore all four corners are missing.
Any suggestions on how to fix this problem?
Regards

Hi
Im not an X200 owner but I presume this unit uses the NVIDIA graphic card.
So I think this issue is related only to the wrong settings in the nVidia control panel.
I cannot provide you an exactly solution but I would recommend checking the settings in the control panel -> Nvidia control panel -> Video & television.
You could change to the Advanced view go through the single options.
Good luck

Similar Messages

  • Indesign CS6 - interactive pdf with the hidden image can't be print out

    Hi all,
    I am creating a interactive pdf with "Hidden until triggered" function when roll over to apper and roll out to disapper and also selected a "printable" function (Button and Forms/ PDF Options/ printable).
    The image can be print out when opened in very begining, but after triggering those hide image... those images just cant be print out!
    Is it any way to print out the hiden image after triggered?
    Thanks

    Pressumably an Indesign question.
    Try posting in the Indesign forum
    http://forums.adobe.com/community/indesign/indesign_general

  • How do I backup my MacBook Pro when the disk image is grayed out?

    I have a MacBook Pro (15 inc. four years old) running OSX 10.6.8 and last night I got the color pinwheel of death.  I could not force quit anything and had to manually power down.
    When I powered back up I got the folder with the question mark.  I ran Disk Utility and tried to Repair Disk, but I got:
    Disk Utility stopped repairing "diskOs2"
    ...Back up as many of your files as possible
    Details: Invalid B-tree node size
    The volume could not be verified completely
    Volume repair complete
    Error: Disk Utility can't repair this disk, Back up... at the disk, and restore your backed-up files
    I hooked up an external hard drive and tried to make a copy of the disk image, but it is grayed out.  I also tried to partition the main Hitachi drive and make a "New Image" but I got: "Unable to create backup (input/output error)
    So I now have a Genius Bar appointment for tomorrow, but I can't even back up my computer before going.  I can have them tell me what to do, but then I'll have to go home and do it, and then make a second appointment.
    Any suggestions?  Oh, and I backed up this computer about six weeks ago on Time Machine, but I'd love to make a copy of all new files I've created since then.
    Thanks!

    You have two options. Purchase Disk Warrior or erase the drive. The former would require your ability to install a download of DW on a bootable disk so you could repair your hard drive. And, DW costs $99.00. The latter requires a Snow Leopard installer DVD from which you can boot, erase the hard drive, then reinstall Snow Leopard. Then download and install Mac OS X 10.6.8 Update Combo v1.1. You can then restore from your Time Machine backup. There is no way now for you to backup files unless you can access the drive. Open Disk Utility, select the entry for your disk volume then click on the Mount icon in the toolbar. If your volume mounts on the Desktop then you may be able to copy files to an external drive or even run a Time Machine backup.

  • I'm having trouble with my clone tool. When I am cloning it appears OK (the image within the brush circles is the correct colours) however once the cloning is done, it processes leaving me with a darkened blur. Any help with what's going on would be appre

    I'm having trouble with my clone tool. When I am cloning it appears OK (the image within the brush circles is the correct colours) however once the cloning is done, it processes leaving me with a darkened blur. Any help with what's going on would be appreciated.

    Which tool in Camera Raw, exactly? The Spot Removal Tool? Adjustment Brush?

  • Satellite X200-1AA - After recovery I have the previous BIOS version?

    I recently updated the BIOS of my Toshiba Satellite X200 1AA with Windows Vista SP!. After a few days, I made a product recovery using the recovery CD. When the recovery is made, does the BIOS return to the previous version?

    Hi!
    No, the BIOS dont return to the previous version. The Toshiba recovery disk contains the factory settings of the software on your notebook and not the BIOS. The BIOS has nothing to do with the software on your notebook.
    So dont worry, the recovery disk doesnt touch the BIOS and you have still the new version.
    Bye

  • Satellite x200 - how to reset the Bios password

    Hello,
    I purchased a used Satellite x200 to replace my old p100.
    When I received it, I remarked the bios is locked and the person I got it from is unable to tell me the password, arguing she used the finger imprint only four long.
    Is there a way to reset the bios password and how much would it cost?
    Regards

    Hi
    The BIOS password can be removed only by an authorized service provider in country where you live.
    So get in contact with Toshiba service partner and ask for BIOS password reset.

  • Re: Satellite X200-22E - Can I use Vista 64bit BIOS for Windows 7?

    Hello!
    Can I use the Vista-64 bit BIOS-Update 2.50 for my Satellite X200-22E? I just installed Windows 7 HOME PREMIUM 64 bit and it works fine.
    Before this I had XP-32 bit running.
    Thank you in advance!
    Tom

    I have a X200-20S and am running Windows 7 64bit with BIOS Ver 2.5 for 32bit Vista. If I try to install ver 2.5 for 64bit Vista I get an error message which tells me the ROM image is identical to the one already installed!!! I can only assume that the installer software can't distinguish beteen the 32 and 64bit versions? Not sure what the difference is but I haven't had any problems with Windows 7 so far apart from the subwoofer not working.

  • Satellite X200-245 can i install a second HDD

    on satellite X200-245 : can i install a second hard drive ?
    is it possible ?
    There is a place for it but no sata connection on the mother board where can i find this connector

    No you cannot install the second HDD because there is no HDD connector which would allows to connect the HDD to the mobo.
    And No, its not possible to upgrade the mobo with such connector.
    The X200 has the two HDD bays because some X200 support 2 HDDs and some dont support it.
    Your X200 doesnt support 2 HDD

  • Satellite X200-191 = Laptop turns on 4 seconds, black screen,humming sound

    _*Satellite x200-191*_
    Core2 Duo T7700
    *Original:* 1024MB + 1024MB Memory 667MHZ / 512MB VRAM *Replaced:* Kingston Kingston KVR667D2S5/2G (I have this 2x)
    *Original:* 200GB + 200GB Harddisk Drive (4200RPM) SATA *Replaced:* Only 1 HDD left, other one I will get back in 2 days.
    17 WSXGA+ TRUBRITE TFT Screen
    HD DVD-ROM Drive
    56K Modem / Lan
    W-Lan (802.11 A/G/N)
    1/3MPixel Web Camera
    Bluetooth
    Microsoft Vista Home Premium 32 Bit
    _*My Problem:*_
    I take out the battery, plug it in the power. Charging light turns on.
    I press the power button, power led turns on. Followed by the hdd led turn on, which blinks real quick, stays on for 1 second, then turns of. The power led stays on during all the time.
    2 seconds after the power button, a fan starts blowing, while the above mention hdd led blinks for 1 second, 2 seconds after the fan starting to blow, it turns off.
    We are now 4 seconds farther, pretty much, everything stopts, except a very tiny minor humming sound. (I just left it on for a couple minutes, sound remains, nothing happens.) (While writing this all I left it on for 10 minutes, the laptop heats op a bit, the adapter gets hotter, but still only the very tiny minor humming sound.)
    +So my laptop works for 4 seconds, wont give any screen (black screen) wont load even BIOS. What could be wrong ?+
    _*Fixing?:*_
    Ok so I left the laptop after a couple of months, being told it was dead, just getting it dusty. (Read history to get this)
    But since last week, I figured its getting dusty, I never opened a laptop before, why wont I try doing that.
    _+*I replaced the Memory modules, Slot A and B , both memories , same time, one at a time, all possible ways.*+_
    _+*Since I have only 1 HDD, I used it in both slots. Looks to no difference. Using NO HDD, I do NOT have the very tiny minor humming sound!!!*+_
    I followed a guide [http://www.irisvista.com/tech/] to open my laptop, to see what is inside.
    Finding no lose plugs, but did find a certein oil, and some white paste.
    Closing the laptop, to try it out, I accidently screwed a couple wrong screws in the laptop, piercing the top cover of my laptop, but no chips were hit during this :P (Yeah, Im a bit to strong, I should have figured using force for a couple of the screws wasnt the best thing I could do, but now i know :p)
    *SOOO* My question, while I wait for the extra old HDD (getting it in 2 days). (Probably making no difference)
    What could be wrong, more precisly. Should I like try taking out the video card or something ?
    Is there something I should do with some soldering?
    Any tips/tricks that could work, wether to fix the laptop, or to narrow down the problem , to a small part which i could replace ?
    BEST REGARDS
    Danny Visser
    The Netherlands
    _*History:*_
    Not sure if this is any important, but just to let you know, if intrested what happend all to the laptop ;)
    I bought the laptop at Shape Computers (in the netherlands) Asking this laptop mentioned above, with 2 things changed. I wanted more Memory, and I wanted windows XP. The shop told me this was possible. They bought me the laptop in, they replaced the Memory with the kingston memories. They installed windows XP instead of the Vista. They laptop did work at this very moment. So I bought the working laptop, with 1 year warranty.
    With the folders extra given with the laptop, I was able to increase my warranty from 1 to 2 years for free, so I did.
    After probably a couple of weeks I noticed that the laptop was getting real hot, after longer usage. But according to the manual this was normal.
    I did use the laptop for gaming, but also 2 months for a gaming study. So I did take it several times to school in a backpack.
    After not using it for school anymore I reinstalled Windows Vista 32 BIT
    At a very point not sure when precisly I noticed that it wouldnt turn on (probably same problem as I have now) but I was really relaxed about it, tried it later, and somehow it did work again. This happend perhaps about 5 times in total.
    Knowing something was wrong, I took it back to Shape Computers. They checked it. (Not showing me what they did to it) But they told me I had nothing to worry about.
    After about 2 years I actually sold this laptop to my mom. She used it a couple times (she is like realy noob, just about computers in generally, not even knowing if she should double click icons or not) She took it with her a couple times on trips, and they after about 2 years and 2 months ... this problem happend.
    My mom knows a guy, and a friend of that guy, works alot with broken laptops, which told me that the problem was the _+motherboard+_.
    I decided to take it back to the shop. After a long progress being down there (about 6 to 8 weeks)(Me going to the shop like 15 times). The shop managed to tell me it was the motherboard. That the motherboard couldnt be fixed and that a new one would be way to expensive.
    +(I Known at this very point, after getting the motherboard back, that this laptop was not screwed open yet. The screws were still brand new.)+
    Funny information(not for me), during this period of about 8 weeks, they actually told me lies like ... I left a message at your voicemail, I DONT HAVE A VOICEMAIL ... sorry for the caps but im still xxxxxx about those lies.
    So still believing the shop ... my laptop is gone .... dead ... but then since last week, I started looking into the laptop myself ...(Fixing)

    Ok, the company did not reply at all ... I ended up sending another email. And they did reply with a automatic message. Now weeks later still nothing more then that auto reply.
    While I was waiting I contacted another guy that knows alot from these laptops. Getting a new part would cost me about 300 euros, and thats just the part, not even replace time.
    Considering the toshiba help I have gotten ... (pretty much none) in these last years.
    I declare my laptop dead. And decide at this very moment, that I (ofcourse) never will buy toshiba hardware again.
    I might pay a bit more at my Dell computers, but the support in the last 8 years with 5 different computer systems and 1 laptop. Has been perfect in compare to the toshiba support I have gotten in the last 3 years, which just fails.
    Thx tho all you guys for the replys.
    Danny Visser

  • WLAN has stopped working - Satellite X200/N00, Vista 32-bit Ultimate (SP1)

    When I purchased this laptop earlier this year, everything worked pretty well with no significant issues. A few weeks ago, however, my WLAN connection stopped working -- specifically, it does not get a valid IP address from the router.
    Notebook is a Satellite X200/N00 (PSPBUA). OS is 32-bit Vista Ultimate (SP1).
    It was working fine right up to the point where it stopped working. The router itself still works fine -- I have used the wireless connection with a completely different laptop since having the problem on the Toshiba.
    This seems to be a fairly common Vista issue, but so far everything I've tried has failed to get me anywhere.
    The router is a D-Link DSL-G604T. I have updated it to the latest version of firmware, but this has not made any difference.
    In Vista I have disabled IP v6.
    I have installed the latest version of the Intel wireless driver (v12.1.2.1). The hardware passes all self-tests, the only thing that fails is obtaining the IP address.
    I don't know why the wireless connection just stopped working -- as best as I can recall, I had not installed any new software or updates just prior to it stopping working. It doesn't seem to be a hardware fault.
    One thing I have not yet done is test the connection with a completely different wireless router (e.g., at a public access point).
    That may be instructive, but not really useful, since I need to get it working with the router I have!
    Any thoughts?

    Hi
    There are many different reasons why the IP address cannot be obtained.
    In first case you should check if your firewall is disabled or doesnt prevent the IP address from receiving.
    Secondly you should check if the TCP/IP protocol was set to automatic
    You can find such settings in TCP\IP protocol properties.
    Last but not least I would recommend disabling all security settings on the router and trying to establish the WLan connection.
    Please check if the Mac address filtering was disabled, disable the WLan encryption, and check if the right SSID is in use.
    If it will be possible to establish the Wlan connection then you could enable step by step the single WLan security settings on the router.
    Bye

  • Satellite X200-191 - Error message with new BIOS

    I have a Satellite X200-191 whit BIOS 2.70 on it when I wont to install Configfree than I get the messege that my laptop is not a Toshiba. And I got the program that you can install from Toshiba that downloads the drivers of your laptop that is not a Toshiba. But when I load the old BIOS 2.50 every thing is good no message that it is not a Toshiba laptop nothing white the same drivers. Is there somthing whit the BIOS update?
    It doesn't happen when you update the BIOS from 2.50 to 2.70 only when you have 2.70 and do a clean install of Windows 7 64bit
    Greetings

    Hello
    > But when I load the old BIOS 2.50
    How you have installed the old BIOS? Older BIOS versions are not available on Toshiba website and downgrade can only be done from an authorized service provider because special BIOS update program is necessary.
    Satellite X200-191 belongs to PSPB9E series so have you downloaded the update for this model or other model (PSPBUE) that would be wrong?
    I read about similar messages here in forum and the reason was a replaced mainboard and the ASP did forget to write the DMI information. Did you exchange the mainboard?

  • Satellite X200: WLan driver does not work using WXP

    Hi
    I'm trying to get the WIFI working under XP on my Satellite X200. I've downloaded these "wlan-intel-1244-7147" drivers but still no luck, also after installing these drivers I get an error when I shut down saying 'Sample program not responding'.
    This is a complete clean XP install, I gave up with Vista.

    Hi,
    if the intel drivers did not worked then try the atheros drivers which should then definetly work.
    Cheers

  • Installing a second operating system (Windows XP) on a Satellite X200 20G

    Hello everybody, I would need your help on the following:
    I know lot of posts describe parts of what to do (I spent sometimes on then), but I would like to limit at maximum the risks so I am looking for the most simple and exhaustive guideline for this change.
    Why XP? Just because I run lot of astronomy hardware and software,and, well, Vista is not ready yet...
    I am happy with Vista for other uses so I will keep it, install XP on the second hard drive and make a dual boot.
    First fear: will I have all the appropriate drivers to jump?
    I run a Satellite X200 20G PSPB9E-02G021FR and I have found on the Toshiba support site "some" drivers for XP, but it looks as if the display (at least) is missing...
    ==> 1) could you pls give me a link to a page which lists all the drivers for my specific system?
    ==> 2) could you pls point me to a post which describes the steps to follow?
    ==> 3) it looks as if nLite is the right choice to make the XP installation CD, but I assume I could not just launch it under Vista and capture my drivers for XP, is this right?
    Thank you very much for your help
    Guy

    > {quote:title=Gipsyman wrote:}{quote}
    > The XP BIOS for the X200-G20 was not released. I didn??t find any XP BIOS for this notebook series on the Toshiba European driver page.
    > Please note that you can use only the BIOS which were designed especially for this notebook series!!!
    Well, excuse me *Gipsyman* I surely don't want to be a pest, but the need to install XP on the Toshba X200 20G (for example) is not a dream, it is a hard reality and in Europe I know tens of people (if not much many) who had to do so because their preloaded Vista was not at all answering their needs, and there was no longer Toshiba laptops available preloaded with XP.
    I am member of a forum which is dedicated to the Toshiba X200, I can tell you that we love our Toshiba and are very happy ( /proud ?) of it and I am not sure how many have kept the original platform, but definitely it's very few.
    By the way, Toshiba releases 32 drivers for XP in his European download page, so this does not happen by chance.
    In fact lots of people are wondering for the BIOS compatibility under XP, so my purpose, asking this question earlier in this post, and trying to make our position clear in this one, is to make the part between what is the theory: e.g. "The Toshiba X200 is preloaded with Vista, all changes to XP is under customer responsibility and at his own risks" (let me smile a bit here as Thoshiba still kindly provides XP drivers....) and the reality: e.g. "hei guys!, be careful, if you update your BIOS while you are running XP, you take the risk to break something".... see what I mean?
    I hope this clarifies what I (my European friends and I) need to know: what is the real risk of making BIOS updates while our laptops are running XP because we had to.
    Pls, again, don't see anything aggressive in my lines (I really appreciate your help), just a willingness to make things clear.
    Guy

  • Satellite X200 - How to find BIOS setup for Intel Storage Matrix?

    Hi everyone,
    I'm willing to enable the Matrix Storage feature on my Satellite X200-24X. The problem is I can't find any relevant option in the BIOS setup...
    Thanks !

    Hi
    The Intel Storage Manager is a driver and not an option in BIOS. The only option that you have in BIOS is the HDD access mode. There you can change between AHCI and Compatible.
    For AHCI mode that is faster you need Intel Storage Manager driver. For Compatible mode you dont need additional drivers.
    You want to know how to install Storage Manager? Just use the forum search, you will find hundreds of results. ;)

  • Satellite X200-21W - Does multi DVD drive have labelfash and securedisc?

    I have an Satellite X200-21W Modell Nr. : PSPB9E-03U01WGR with the multidvd TS-L632H.
    My question
    Does this drive have labellash and securedisc, or only one of those, or nothing
    Thx for your support

    Unfortunately, I didn't find any details about the Labelflash burning technology but from my knowledge only the Sony NEC Optiarc, TEAC, Quanta Storage, und Pioneer drives supports this Labelflash burning technology.
    The TSST TS-L632H is no listed as a supported product so I think it doesn't support the Labelflash but *Lightscribe*.
    Best regards

Maybe you are looking for