Satellite X200 with Windowa 7 became slow with JAva 6 update 17

After installing Windows 7 on my Satellite X200 I made the upgrade of Java from update 10 to update 17. The computer became very slow when ther a Java window opened in IE8. I uninstalled update 17 and installed update 10 again at no avail. Please help!

I agree with you and will try to get an answer on a Java forum. I tried a recovery to an earlier date but the recovery failed, probably because I had already unninstalled the original java update 10. The same happened even after I reinstalled update 10 (which, by the way, is not shown on the list of programs of the Control Pane remove programs list.

Similar Messages

Offline Web Start app fails to launch with Java 7 Update 25

So it seems that another issue with Java 7 update 25 and Web Start applications is that a signed application will not launch when offline.
It fails when attempting to check the revocation status of the signing certificate.
Anyone have any ideas to get around this exception aside from uninstalling update 25?
Thanks!
com.sun.deploy.security.RevocationChecker$StatusUnknownException: java.net.UnknownHostException: ocsp.usertrust.com
               at com.sun.deploy.security.RevocationChecker.checkOCSP(Unknown Source)
               at com.sun.deploy.security.RevocationChecker.check(Unknown Source)
               at com.sun.deploy.security.TrustDecider.checkRevocationStatus(Unknown Source)
               at com.sun.deploy.security.TrustDecider.getValidationState(Unknown Source)
               at com.sun.deploy.security.TrustDecider.validateChain(Unknown Source)
               at com.sun.deploy.security.TrustDecider.isAllPermissionGranted(Unknown Source)
               at com.sun.javaws.security.AppPolicy.grantUnrestrictedAccess(Unknown Source)
               at com.sun.javaws.security.JNLPSignedResourcesHelper.checkSignedResourcesHelper(Unknown Source)
               at com.sun.javaws.security.JNLPSignedResourcesHelper.checkSignedResources(Unknown Source)
               at com.sun.javaws.Launcher.prepareResources(Unknown Source)
               at com.sun.javaws.Launcher.prepareAllResources(Unknown Source)
               at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
               at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
               at com.sun.javaws.Launcher.launch(Unknown Source)
               at com.sun.javaws.Main.launchApp(Unknown Source)
               at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
               at com.sun.javaws.Main.access$000(Unknown Source)
               at com.sun.javaws.Main$1.run(Unknown Source)
               at java.lang.Thread.run(Unknown Source)
               Suppressed: com.sun.deploy.security.RevocationChecker$StatusUnknownException
                              at com.sun.deploy.security.RevocationChecker.checkCRLs(Unknown Source)
                              ... 18 more
Caused by: java.net.UnknownHostException: ocsp.usertrust.com
               at java.net.AbstractPlainSocketImpl.connect(Unknown Source)
               at java.net.PlainSocketImpl.connect(Unknown Source)
               at java.net.SocksSocketImpl.connect(Unknown Source)
               at java.net.Socket.connect(Unknown Source)
               at sun.net.NetworkClient.doConnect(Unknown Source)
               at sun.net.www.http.HttpClient.openServer(Unknown Source)
               at sun.net.www.http.HttpClient.openServer(Unknown Source)
               at sun.net.www.http.HttpClient.<init>(Unknown Source)
               at sun.net.www.http.HttpClient.New(Unknown Source)
               at sun.net.www.http.HttpClient.New(Unknown Source)
               at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(Unknown Source)
               at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
               at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
               at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
               at sun.security.provider.certpath.OCSP.check(Unknown Source)
               at sun.security.provider.certpath.OCSP.check(Unknown Source)
               at sun.security.provider.certpath.OCSP.check(Unknown Source)
               ... 19 more

Disregard. I found that the user had changed the java security settings to "Very High" in addition to upgrading to update 25.

HT1338 II need to use Java 6 to run a web application because it isnt compatible with java 7 update 7. is this possible? need to use Java 6 to run a web application because it isnt compatible with java 7 update 7. is this possible?

II need to use Java 6 to run a web application because it isnt compatible with java 7 update 7. is this possible?

MadMAC0 posted at https://discussions.apple.com/message/20107182?ac_cid=tw123456#20107182 that:
Apple has posted (10/22/12) the approved solution for restoring the Java 6 plug-in:
Java for OS X 2012-006: How to re-enable the Apple-provided Java SE 6 applet plug-in and Web Start functionality.

ASA Rdp plugin not working with Java 7 Update 55

When accessing the clientless VPN on an ASA 5510 with Java 7 Update 51, the RDP and VNC plugins work exactly as they should. But now that Java 7 Update 55 is out, the plugins once again are useless, as they throw Java security exceptions about "attempted to open a sandboxed jar <applet url here> as Trusted-Only".
This happens even with the most up to date RDP and VNC plugins available on the Cisco website. Is anyone else having these problems, and know of any solutions or if Cisco is working on this problem at all?
Thanks

I've tried various Java Versions but no luck at all.
Last try was with:
Java-Plug-in 11.5.2.13
JRE-Version verwenden 1.8.0_05-b13 Java HotSpot(TM) Client VM
I am also getting following error:
Missing Application-Name manifest attribute for: https://<mywebsite>++/rdp/properJavaRDP14-1.1.jar
All known workarounds are done to fix the problem. Could anyone confirm that this is fixed with ASA version 9.1.4 ? Its a productive ASA so i do not want to test around for a maybe :)
Best Regards
Ayhan

Java web start security dialog with Java 7 update 51

I build a Java Web Start application signed with a valid certificate.
When I star the application the security dialog appear correctly as show in this figure
http://www.java.com/en/img/download/trusted_signed.jpg
My issue is about the "do not show again" checkbox.
If the attributes href are present in the jnlp tag of the jnlp file the checkbox appear.
If the attribute are not present, the checkbox doesn't appear and the run needs to be confirmed every time.
(Example:
<jnlp spec="1.0+" codebase=
"http://docs.oracle.com/javase/tutorialJWS/samples/deployment/webstart_ComponentArch_DynamicTreeDemo"
href="dynamictree_webstart.jnlp">
This is a problem because my jnlp file is under a password protected directory and if href is specifed, the Java Web Start application try to retrieve it as the other resources. ( result in access denied because only the browser session is authenticated and the run fails)
The documentation at Deploying a Java Web Start Application said:
The codebase and href attributes are optional when deploying Java Web Start applications that will run on at least the Java SE 6 update 18 release or later. You must specify the codebase and href attributes when deploying Java Web Start applications that will run with previous releases of the Java Runtime Environment software.
What is the right code? With href or without?
Is this a BUG or a feature?
How can I show the "don't show again" checkbox without having to specify the href attribute?

From the documentation at JAR File Manifest Attributes for Security
If the Application-Library-Allowable-Codebase attribute is present and matches the location from which the RIA is started, then a single host is listed in the Location field for the prompt and the option to hide future prompts is provided.
This issue is also discussed here: Java Web Start security dialogs with Java 7 update 51 - Stack Overflow

OATS Compatability with Java 8 update 25

Hello All,
Question regarding OATS compatibility with Java 8 update 25.
We are currently running OATS 12.2.0.1 with Java 6 update 7 without any problems but now we have to update our Java,
Does anyone know if OATS 12.2 will support Java 8?
Or will OATS 12.4 support Java 8?
Also, is it possible to run OATS on Google Chrome as the default browser?
Any feedback regarding the above will be appreciated.
Thank you!

Hi,
Using of Java 8 with Discoverer 11.1.1.7 is not supported. PLz. check the Certification Matrix:
http://www.google.de/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CCEQFjAA&url=http%3A%2F%2Fwww.oracle.com%2Ftechnetwor…
Regards
Borys

HT201263 Hi Concern,i have updated my iphone 4 to ios7, now it becomes too much slow.all the applications take time to open, its touch response also became slow. How to update it again to ios6 please help

I have updated my iphone 4 to ios7 few days back, After that it becomes too much slow.all the applications take some time to open,
its touch response also became slow. .
One of my friends has also updated his iphone 4 to ios7,it is also facing the same problem.But the friend having iphone 4s is not facing any
problem with this new version.What i think iphone 4 has not too much good processor like iphone 4s & 5 to get it updated to ios7.
It destroys all the entertainment of using iphone.
How to update it again to ios6.
iphone 4 users please dont update iphone 4 to ios7.please

Sorry, but Apple does not provide a downgrade path for iOS.
Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any device.
Note that you will void the warranty and loose official support by Apple.
Feel free to let Apple know at http://www.apple.com/feedback
Anyway, give a try resetting all your settings:
Settings > General > Reset > Reset All Settings

What is the issue with Java 7 Update 6 windows installer?

Hi guys,
I know that this is not the forum to ask Java Installation issue, but I couldn't find a forum that specifically deals with such issues. Also, as the issue in hand concerns JavaFx, I thought it appropriate to post the question here. Let me begin...
I ran the installer for JDK 7 Update 6 on my Windows 7 64-bit machine, and it installed Java successfully, but no JavaFX SDK. So I uninstalled it, and ran the installer again, and it produced the same output i.e. Java installation O.K. but no JavaFX. It also didn't show any error message.
Puzzled, I looked at the system requirements for JavaFX 2.2, and it says SP1 for Windows 7. Sure my Windows 7 is not updated to SP1 yet, but JavaFX 2.1.1 was successfully installed on it, and it had same requirement ie. SP1. Since my numerous attempts to update to Windows 7 SP1 failed, I downloaded and installed separate installer for JavaFX 2.2, which the Oracle site says is for Java 6 only. Now, I am able to compile and run JavaFX 2.2 applications on my system without any problem. It has left me puzzled because if JavaFX 2.2 is compatible with my system, then why the JDK installer for 1.0.7_06 is not able to install JavaFX?
Are other users facing the same issue?
-Dinesh

Check JDK folder. You should see jre/lib/jfxrt.jar there.Yes it is there. And in Netbeans IDE, I specified the JDK home folder where it asks for JavaFX SDK folder location, and it accepted it; the IDE found all the required JavaFX SDK files in that folder as it is able to compile the program without any problem.
Thanks for pointing me to the right direction. All the while I was looking for the folder named "JavaFX 2.2 SDK", and not founding one, assumed it to be some problem with the installer.
Thanks again.
-Dinesh

Satellite L850 with broken BIOS update

Hello! I'm posting here because I'm desperate. I have a Satelitte L850-1PD (EU model - please don't say me I can't write here beacuse is an EU model, I'm sure that I'll get better support here than EU support forums). I recently update laptop BIOS to v6.80 (InsydeH2O UEFI) but after the restart process the laptot didn't boot. It only powers on and it doesn't show anything on the screen and it immediatly shuts down if I press power button again (here a video of what it does). I was Googling days looking for a solution and I've read of a recovery procedure that uses a USB stick to reflash the FD BIOS file, but I don't know the keys to start it and how the FD file has to be renamed.
Thank you in advnace for everyone who'll help me

Up :'(

Java Reports not working in CUE 7.1 with Java 8, update 25

I'm using CUE 7.1 and under the 'Reports' menu there is a 'Real time Reports' selection.
This came up with a Java window and allowed a number of reports. I've found it quite useful and even found an issue with it.
It now longer works- I'm not sure which Java update may have broken it. I'm using 8 update 25 currently.
Any ideas?
Mark

I had a similar problem with a different type of java applette.
Colsky1's suggestion fixed my problem.
I went into security prefernces and selected the Manage Website button.
Then you have to pick the Java applette that you want to allow access.

Why isn't Discoverer Plus working with Java 8 Update 25

I updated Java to version 8 update 25, my discoverer plus version 11.1.1.7 is not longer working due to "Application Blocked by Java Security". The detailed message is "your security settings have blocked an application from running due to missing a "Permissions" manifest attribute in the main jar.
I tried to enter the URL to the exception list, and I tried to uncheck "use TLS 1.2", still nothing worked. Any ideas?

Hi,
Using of Java 8 with Discoverer 11.1.1.7 is not supported. PLz. check the Certification Matrix:
http://www.google.de/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CCEQFjAA&url=http%3A%2F%2Fwww.oracle.com%2Ftechnetwor…
Regards
Borys

Satellite X200 - disk management

Hello to all,
I've a Satellite X200 notebook and I have a question for it.
I would like to know if it's possible change Hard Disk configuration (RAID0 instead RAID1 and so on) and how to do it?
I tried to find change option in BIOS environment but nothing!!
Can anyone help me?
Marry Christmas to everybody.
ik8wtd

Hello Andrej,
first of all thank you to answer to my question.
I have a Satellite X200 with two HDDs. I have to say you that I contacted customer care to have explanations about and they told me that there are no possibilities to change configuration. Notebook doesn't have a RAID controller so it is not possible to do any change in BIOS.
If you have different info please let me know.
Thank you in advance
Felice - IK8WTD

Java 7 Update 11 Not Working with Firefox

For me, the problems described in the thread "Java 7 Update 10 Not Working with Firefox? " Java 7 Update 10 Not Working with Firefox?
are continuing with Java 7 Update 11.
Windows 7 64 bit
Firefox 18
The problem is that "Java(TM) Platform" is missing from the plug-in list.
I've uninstalled Java 7 Update 11 and reinstalled Java Update 9 which correctly installs the plugin and restores Java functionality which was broken immediately upon installing both Java 10 & 11.

981243 wrote:
So why not using Ju11 ? You can workaround the issue. It would sucks but still be safer than using Ju9.
Also ask Mozilla forums if Firefox has options where to search for plugins.
Or try 64-bit Firefox.As I explained in both threads ...
Java 7 Update 10 Not Working with Firefox?
Java 7 Update 11 Not Working with Firefox
... neither jre7u10 nor jre7u11 are working ... and they are BOTH broken with the same problem ... "Java(TM) Platform" pliugin is missing from the plug-in list. It cannot be enabled, because it simply is NOT there. A suggestion was made the jre7u12 will be the "fix" for this issue ... so I installed the Update 12 Preview and it sis ALSO broken, no "Java(TM) Platform" in the plug-in list.
The ONLY Java version that actually works for me is jre7u9.
As far as installing Firefox 64bit ... I see no future in installing a browser that has been discontinued.
http://www.computerworld.com/s/article/9233976/Mozilla_suspends_work_on_64_bit_Firefox_for_Windows
Even though Mozilla relented due to backlash, I continued development will be a somewhat low priority.
http://www.computerworld.com/s/article/9234997/Mozilla_compromises_on_x64_Firefox_after_user_backlash

JTDS not connecting with SQL Server 2008 R2 SP2 + SSL with Java 6 U34-35

Environment:
Windows 7 Pro 32-bit
SQL Server 2008 R2 SP2 (Forced Encryption = Yes, No Certificate provided to server)
Java 6 Update 27-35 and Java 7 Update 2-7
jTDS 1.2.2 and 1.2.6
Under the following setup, our Java application is able to connect to the SQL Server database:
- SQL Server 2008 R2 SP2
- Java 6 Update 27-33 or Java 7 Update 2-5
just switching the JVM to the following would cause the application to be unable to connect to the database:
- Java 6 Update 34 or 35, or Java 7 Update 6 or 7
Browsing through the Java 6 Update 34 release notes, it looks like nothing big was changed, so I'm wondering what has changed with Java 6 U34 and Java 7 U6. I was also looking through a packet sniffer, and indeed the behavior of Java 6 Update 33 and lower was different from Java 6 Update 34 (although I couldn't understand the messages being passed, the number of connections and messages were different).
* This is different from the issue with Java 6 Update 29-30 and Java 7 wherein they were patched for the BEAST SSL vulnerability. That was fixed with the SP2 patch for SQL Server 2008 R2, and for SQL Server 2008 you'd need a hotfix aside from SP3. After patching the server with those updates, Java 6 Update 29-33 and Java 7 U1-5 should be able to connect to the database.
* If I do switch off Force Encryption, all Java versions are able to connect to the database.
Edited by: user1357749 on Oct 12, 2012 1:20 AM

Hi,
It's four months later, but my colleague and I have reproduced the same behavior in both our commercial product, and a very simple example class. It's exactly as you describe it, where the latest versions of both Java 6 and 7 (and several previous versions) hang during the first jTDS SQL query to the DB (immediately after the SSL and handshake). It also happens with the Microsoft JDBC driver.
If you disable the BEAST SSL fix (-Djsse.enableCBCProtection=false), then the connections work without any problems. So, while this is different from the original BEAST SSL problem and subsequent fix, it really seems like some additional changes were made to the fix in a later Java release that broke things.
My colleague has filed a bug with Oracle, and is awaiting a response. We also filed a bug at the jTDS project (#690 - http://sourceforge.net/p/jtds/bugs/690/) that has simple reproduction steps. A contributer at the jTDS project agrees that this seems to be a problem with the JRE, and is not specific to jTDS.
I hope that Oracle will address this issue soon. We need to periodically update the JRE due to vulnerabilities, and we need to have SSL for our JDBC connections for security reasons. This bug puts us and others in a difficult position.

Clientless SSL RDP Plugin Issues with Java 1.7 update 45

Hi All,
It appears the latest Java update (1.7 Update 45) has caused some issues with the Cisco RDP plugin for Clientless SSL VPN.
When attempting to run the plugin to connect to a host, the following error message is receieved:
I believe this may be because the plugin is unsigned which on the previous version of Java seemed to cause pop-ups prior to running. This error seems to occur in both IE and Firefox. The OS is Windows 7.
I can confirm that the previous version of Java (1.7 Update 25) worked OK with this plugin apart from the warning mentioned above.
Does anybody know of a work around or a fix for this? Does Cisco have to update their plugin for this to work on the latest Java version?
Regards
David

Hi Jouni,
Thanks for the reply. From the thread you linked:
The workaround posted in the Cisco Bug is to uncheck the setting "Keep temporary files on my computer" which is found in the Java Control Panel under the General Tab / Temporary Internet Files / Settings ...
This workaround has worked for me with Jave 7 Update 45 on both PC and Mac.
I've just tested this and it has resolved the issue for me.
Thanks!
David

Satellite X200 with Windowa 7 became slow with JAva 6 update 17

Similar Messages

Maybe you are looking for