Satellite Z830-10U does not power on

Greetings;
I plugged my Satellite Z830-10U into power and left it powered on for half an hour and then I saw it like hibernated (screen off). Then it was left for 20 hrs from yesterday plugged into power outlet.. Now it has
its "DC-in" indicator flashing orange, power on indicator is green steadily, the eco indicator is also on and green. The screen is off and it is like the system shutdown.
The problem is that the power botton does not work and pressing it (either for a short or long time) has no
effect. I plug the AC adaptor into power while connected to the computer and I see the battery indicator goes
green and stays green until I unplug the AC adaptor from power outlet or disconnect the charger from
computer.
How can I turn it on and get back my files?
Thanks in advance.
M. Shams

> How can I turn it on and get back my files?
Well, the files are on the HDD
So you can remove the HDD from the notebook and you can use an external USB to SATA controller /enclosure in order to connect the HDD to another computer.
This would be the easiest way to get the access to the files
The other story is the notebook power functionality
For me it looks like its hardware related issue and in such case the unit needs to be checked by service technician hopefully its not a motherboard because in such case the mobo needs to be replaced and this might be a costly affair
Is warranty valid?

Similar Messages

Satellite 5205-S703 does not power up

I know this is an old notebook but Im hoping someone here is familiar with it.
I have had it for many years with no problems till now. It will not power up with AC connected or just battery. I do have the green ac connected symbol on the front LED and also the battery symbol. Also orange battery symbol.
I have tried taking battery out with only AC connected. I have tried just battery with no AC adapter. I have disconnected both battery and ac. I have removed hard drive and checked memory. No help.
Tried holding down power switch for 3 seconds 5 seconds etc. Computer does not even start to power up. I did get the fan to run at one point but there was no other power. On the front LED there is some sort of round symbol in black that I dont know what it stands for. If anyone has any ideas I would appreciate the help.
One other question: Does the battery have to be installed for it to power up even with AC adapter connected?

Hi
What you could do is to disconnect the battery and AC adaptor from the notebook and could wait about 20-30min.
Then connect both parts again and try to power up the notebook.
If it doesnt help then I dont see big chances to solve this issue without an additional help from a notebook technician.
PS; regarding your last question;
If the AC adaptor was connected then a battery is not needed.

Satellite L775-11N does not power ON with new battery

Hello
I recently bought a new battery for my Toshiba Satellite L775-11N.
When I plug the battery in, the battery led stars flashing (according to the manual, it means the battery has no energy anymore and is not charging).
When it is plugged, I cannont start the computer, I have to take it back and put it after.
What can I do to make my battery work?
This is the second i buy, from two different websites, the modele number is strickly the same.
Thanks in advance, sorry for my bad english (french is my mother tongue)

Hello
I recently bought a new battery for my Toshiba Satellite L775-11N. When I plug the battery in, the battery led stars flashing (according to the manual, it means the battery has no energy anymore and is not charging). When it is plugged, I cannont start the computer, I have to take it back and put it after.
What can I do to make my battery work? This is the second i buy, from two different websites, the modele number is strickly the same.
Thanks in advance, sorry for my bad english (french is my mother tongue)

Satellite A105-S2051 does not Power up

I have a customer who brought in their laptop, the A105-s2051 that when you powered the unit on, it would go on then off. So as you hit the power button, it would loop on for about 2 seconds, then off, then on ect for 6 times and stay off.
I first replace the RAM, still looped, then took off hardware one by one and tested, still looped. I then had the MB out of the case, plugged in power, still looped on and off. Checked voltage of power supply, that was correct. Also, tried each startup with missing hardware with/without battery on each piece.
So I installed a new CPU, still looped. Only thing left was MB. Ordered MB, guess what, still looping. Repaired several hundred laptops, haven't run into this with a Toshiba before. (Had a other manufactor do same thing once, turned out PS would loose slight voltage after 5-6 seconds).
I'm stumped here, any help would be great. Thanks.

Thats a really strange issue because you changed a lot of hardware.
So I would go to an official ASP. Here you will find one:
http://www.csd.toshiba.com => Repair => Locate a Repair Centre

Satellite M50 does not power up

Hi,
My Satellite M50 notebook does not power up. The laptop itself has been working fine, but I cannot use it as the battery has drained. I have checked the AC cable and this seems ok. Does the notebook have an internal fuse which I should check? If not, what should I do?
Thanks.

Hello
If I understand you well you cannot use notebook with AC power supply only. Am I right about this?
The switching between AC or battery power supply, do the boards power supply electronic and there is no some kind of switch that you can check.
When you connect your notebook to AC power supply is the power LED ON?

Satellite Pro 440 CDT does not power up

Hi, I have an old 440 CDT which does not power up. Anyone any ideas???
AC is connected, power light is on, green. Battery is dead (as in buried). When I press the power button, the following happens:
- On light is green
- Num lock key (the one with the "A" on it) flashes 3 times: long-short-short
- HDD light flashes on 1 time, green
- CD light flashes on 1 time, orange
- Popping sound in the speakers
Then it turns off again, with the power light burning green constantly.
Nothing happens on the display (tried FN F5). I also switched CD/floppy, attached both, with or without battery, no help.
I am puzzled, please help!
thx, Eric

Hello Eric
Like you know, on this way it is not possible to give any precise diagnostic, just speculate what the problem can be. In my opinion it is definitely because of defective electronic on board but what exactly it is not easy to say. Try to contact someone who has experience with notebook repair procedure.

Satellite L100-113 does not start after memory upgrade

Hello.
Our integrator bring to our company memory modules KVR800D2S5, but notebook doesn't start :(
I read manual - this notebook supports 533 PC4200 memory modules.
But SO-DIMM 533MHz will be delivered only in a month...
What memory modules we can install to Toshiba L100-113?
Thank you.

Hi
I think the notebook does not power up due to a faulty or not fully compatible memory module.
Please check this 3rd party memory website:
[Memory for Toshiba Satellite L100-113|http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=22360&ft=m&st=3]
As you can see the Satellite L100-113 memory can be upgraded up to 2GB (2x 1GB) and you have to use the DDR2 533MHz (PC2-4200) 200-PIN SODIMM
Regards

8800 does not power on but shows the charging symbol! HELP!

Hello everyone,
I have been searching for days now across the web for a solution to a very bugging situation. A'las i am close to giving up. someone please try and help. So here is the problem: I recently bought a 8800 rim (branded for cingular/AT&T but UNLOCKED) from ebay powerseller with 100% rep. it was advertised in MINt condition.
It arrived two days later and seemed in great physical condition.
So i plug in the charger and let it charge for more than 8 hours. I try turning it on but to no avail. During the charge the screen goes dimly on and shows a battery with an electric bolt going through (I assume that means charging..).
It initially seemed to me as a battery problem. So i took it to a local store and borrowed one of their batteries for 8800 and the phone started working fine also made a call with my temporary T-mobile sim inserted. (although their battery was also on low charge)---
So i come home and with a new OEM 8800 battery. plugged it in and charged for like 4 hours and the screen goes on with the charging symbol but does not power on.
I have repeatedly searched through the WWW and came across wide variety of dilemmas but none were any helpful. I also tried installing the latest OS...which also spectacularly failed [got an error that ...loading failed during the mult-load seesion...or something like that. I followed several very well written guides [advising that the manager and OS be installed on PC and etc.].
SO I MAKE A DESPERATE REQUEST FOR HELP FROM ANYONE OUT THERE WHO CAN HELP. WHAT'S THE DIAGNOSIS WITH THIS BB. IT WAS ABLE TO WORK WITH THE BORROWED BATTERY FROM A LOCAL STORE..EVEN MADE A CALL AND EVERYTHING...BUT WITH THE BATTERY THAT CAME WITH THE eBay PURCHASE AND THE THE BRAND NEW THAT I BOUGHT....IT DOES NOT POWER ON.
BESIDES HOW LONG SHOULD I BE CHARGING IF IT IS NEW OR IF THE PHONE HAS NOT BEEN IN USE FROM SOME TIME??
THANKS IN ADVANCE.
Please help ASAP.
Mirza

How are you charging the BlackBerry? Do you have a wall charger or are you charging via USB cable from your PC? Its also possible that the charging circut in your BlackBerry is faulty. This would explain why a charged battery works while your uncharged battery is not.

HT1339 My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

Time to replace it: $49 2nd Gen shuffle at online Apple Store...

I have had my iMac for 55 days now and twice I had to power off/on and then It does not power up correctly. I verified my disk and found errors that could not be repaired. I erased the drive and restored system back to the previous day.

I have had my iMac for 55 days now and twice I had to power off/on and then It does not power up correctly. I verified my disk and found errors that could not be repaired (errors were associated with boot drive) I erased the drive and restored system back to the previous day. Has anyone else experienced this problem?

Since it's a new machine, contact Apple's Support and let them deal with it. Allen's already recommended an Apple repair station visit. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you might be eligible for an onsite repair since yours is a desktop machine (depends on where you're located). BTW, the AppleCare Protection Plan's the best warranty policy available for desktop machines. Get it if you don't have it before contacting Apple.
27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

Screen/Computer does not Power Up when life the Display from being Closed

Sometimes (not always), when i come back to my MacBook Pro and open the display after it has been closed for a bit, the screen and computer does not power back up or anything. If you look at the screen there is a very FAINT image on the screen of whatever was open when the screen was closed, but you can't do anything, nothing is responsive, etc. I have to hold down the power button until it turns off, and then right before it turns off the screen will power up for one second and then shuts off. Any ideas?

I am having a similar issue when transitioning from my external display via the Mini Display to DVI adapter back to the internal LCD. The screen will go black, the machine will not sleep if I close the lid, and none of they key commands appear to work. The only response I can get is the caps lock key will turn off and on. When I restart the machine, I get no details on a Kernel Panic, or anything else, so wondering if it has something to do with the video drivers.

HT4061 HOW CAN I GET MY SERIAL NUMBER WHEN MY PHONE DOES NOT POWER ON

ERROR 4005
ALWAYS MAJOR TROUBLES WITH YOUR #@#@#@ UPDATE....
Since I have done the update for IOS 7.1 my iphone 5S does not power on anylonger or more exactly remains stucked on the apple logo until there is battery...
I am in europe right now and for 10 more days and I do not have phone anylonger.....
I have tried to reset, restore.... connect on Itunes....
Once the IPhone 5S is powering on by pressing both general button and the power switch more than 5 sec,
It says please connect this iphone to Itunes for being restored,
Once the procedure completed, extracted, loaded etc,
then the iphone is shutting down for restarting,
On itunes it says looking for iphone.... and you wait you wait you wait,
the iphone is stucked on the apple logo and ?
Nothing for then having a pop up saying "the iphone "iphone" could not be restored. An unknown error occurred (4005)
Of course I cannot provide the serial # because my telephone DO NOT WORK !
Nothing. so frustrating.
The connection is made with apple chords and connected to my last macbookair... nothing strange.
file:///Users/erikherve/Desktop/ERROR%204005.png

Not sure why you need the serial # if you phone is locked.
Plug it into iTunes, and you can get the serial #, and also unlock your phone.

Nomad Zen Xtra does not power

I have just recieved my Zen Xtra today. But when I power it on, per the manuals proper instruction, it does not power on. I have also tried to charge the battery with the mp3 player both on & off. When I had it on the "using AC outlet" icon would show. It does seem I need a new battery. But I fear something else, could the charging mechanism be dead? This player is a refurbished product by the way. It works on the AC outlet, I can transfer files to it, and I can successfully connect it to the USB port. the hard dri've sounds fine. It seems I need to buy a new battery right? Where else besides Creative.com can I buy one? Thanks.

First, read/try the advice here
Failing that, I would suggest buying a replacement battery. Check froogle.com (that link is set to the best deals) for a good price.

T61p 14.1" Does not power up

My 14.1" T61p Type: 8891-CTO laptop does not power up.
After my last successful use, it was sitting idle for 2-3 days with battery & AC adapter connected. When I turned it on nothing came up, no battery charging light or display. I do not have mini/advanced dock.
So far I've tried the followings:
1.) Removed Battery & switched on with AC adapter (with & without circuit breaker)
2.) Removed AC adapter & switched on with Battery
3.) Removed HDD, RAM, DVD Drive one at a time & again used step 1 & 2 with no luck.
I bought it new in Dec'07 & still under warranty. I have never used Lenovo support before but from what I've read, their on-phone support sucks.
a.) Have you faced similar problem or know the solution?
b.) Does Lenovo have any local repair center in NJ or NC where I can physically carry the machine & get it fixed?
c.) What will be the fastest/sure-shot way of getting it fixed?
Thank you!
Warm regards,
Hitesh
Thank you!
Warm regards,
Hitesh P
Solved!
Go to Solution.

Ok! It's fixed! I disconnected AC, removed the battery. Then, I took out / reinserted the MEMORY CARDS. As soon as I plugged in the AC, VIOLA! Indicator lights were on. I replaced the battery. I powered up the pc -- battery showed only 2% juice. Moral of the story: if you leave the pc in hibernate (prolly sleep mode too) for an extended period without plugging in, the battery will lose juice and the pc memory will remain in the previous mode, unable to register when AC is available. Not ideal, but what I think that's what it is. OR - someone else suggested that the PC needed a longer time to recharge after wasting all the battery juice -- and that I should've been more patient. But, the PC had been on the AC for 2 hours and no indicator lights were on, which made seemed to indicate that the PC was unable to register that it was attached to the AC power. I needed to get some work done, so I was ready to try anything. When in doubt, take the mem cards out. And reset them.
Sayonara!

Ipod does not power up unless plugged in

My ipod touch does not power up unless plugged in or connected to the computer. It is fully charged and when I unplug from the power outlet or computer it will stay on for a minute and then turn off again. It only shows the apple icon when I try to turn it on unplugged and then turns back off.

Likey the battery is dead.
Try the following to rule out a software problem
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

Satellite Z830-10U does not power on

Similar Messages

Maybe you are looking for