Satellite Z930-14F - cannot install Win 8.1 from SCCM 2012 R2 environment

Dear all,
Sattelite Z series laptops cannot install OS (win 8.1) from our SCCM 2012 R2 environment.
Either no installation is starting, or pxe boot aborted error is showed.
The environment is used to successfully install OS (win 8.1) on different other vendor computers (dell) and virtual machines (hyper-v and vmware).
I've tried both UEFI and CMS boot options and tried to switch off the secure boot. Please advice.
Also, i've read about the "SCCM installation package for Toshiba". Will it help in my situation or is it just driver packages for SCCM?
Best Regards, Evgeny.

I guess you are speaking about this Toshiba package:
http://www.toshiba.eu/services/on-demand/business-computing/sdp120gs-v/
I dont have much experience using such SCCM drive package but it definitely compatible with the Toshiba business notebooks. The Satellite / Portege Z930 belong to the business range and I think the package should be compatible.
This package seems to be for all IT administrators who manage devices on the corporate network with SCCM 2012 R2. Toshiba offers with the new Toshiba SCCM package a solution to integrate other notebook into an existing IT infrastructure quickly and smoothly and all Toshiba Driver and application packages and a demonstration task sequence are integrated.
However, it seems that you could get more details about this package directly from Toshiba [email protected]
By the way: The Win 8.1 installation requires the UEFI mode (in case the UEFI BIOS is available). But booting from another, external source requires the disabled secure boot option.
So maybe you should use the UEFI mode but should disable the secure boot option in order to boot from LAN.

Similar Messages

(SOLVED)Cannot install WINE (x86_64 Arch)

Hey.
I cannot install WINE. I already enabled =multilib=, did "pacman -Syu", restarted.
sudo pacman -S wine
error: target not found: wine
I did "pacman -Scc" a few times and chose "Yes" when I was asked to clear unused Repos.
Any thoughts?
Thanks
Last edited by archie0 (2012-03-21 09:40:11)

Next time, please copy the text instead of using a screenshot.

I had my hard drive cleaned and cannot install cs6 master collection from disk. I am getting error message failed to initialize. please download adobe advisor support. I have a pc and am using windows 8

I had my hard drive cleaned and cannot install cs6 master collection from disk. I am getting error message failed to initialize. please download adobe advisor support. I am using a pc and have windows 8. Please help.

start at the top and work your way down applying applicable fixes until your problem is resolved.
if cc (win): https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
if, your error is:
"Installer failed to initialize. File not found." or "Installer failed to initialize. This could be due to missing files."
first, rename OOBE Folder to OOBE.old.
to find OOBE:
64 bit win OS: Program Files x86\Common Files\Adobe\OOBE
32 bit win OS: Program Files \Common Files\Adobe\OOBE
mac os: HD>library>application support>adobe>caps
mac os: USER>library>application support>adobe>OOB
if that fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
if you're using a dvd to install:
copy the disc contents to a desktop directory and install from that directory.
if you're using a mac:
1. Try to Create a new user account in Mac with Administrator Priviledges.
2. Login to the New user, Navigate to Mac HD> Application> Utilities> Adobe Installer folder, Locate products like Adobe Reader, Adobe Flash, Adobe Air and un-install them
3. Navigate to User Library> Application Support> Adobe and move Adobe to Trash.
4. Navigate to Mac HD> Library> Application Support> Adobe and move Adobe to Trash.
5. Start the installation again.
if everything applicable above fails, check your installation logs:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html

How to find using SQL query application deployed on win 7 machines with SCCM 2012 server or user installed manually.

Hi,
how to find using SCCM SQL query, application deployed on win 7 machines with SCCM 2012 server or user/technician installed manually. Please let me know.

Thanks, is it not possible via any script also?
Like Torsten said, how can you tell the difference between CM12 installed applications and locally installed? Once you can answer that, then you can write report.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Cannot install Photoshop or Bridge from CC. Get message 'close bridge.exe', but it is not open.

Cannot install Photoshop or Bridge from CC. Get message 'close bridge.exe', but it is not open. I have CS5 installed on my PC. Help!

Terminate the process in task manager.
Mylenium

Unable to install Cumulative Update 2 for SCCM 2012 R2

Hi,
I am trying to install the CU2 update for SCCM 2012 R2 and I am getting the following error during prerequisite checks:
Server update status: This update applies to product version 5.0.7958. The installed version on this computer is 5.0.7804.1000. This update is not applicable to this computer.
Console update status: No serviceable configuration manager role was found on the local system.
Can anyone provide me some guidance or thoughts on how to get to the correct version to install this update?
Thank you

You are running
ConfigMgr 2012 SP1 – 5.00.7804.1000 - build 7804
The CU2 you are trying to apply is for SCCM 2012 R2.
http://www.systemcenterdudes.com/sccm-2012-version-numbers/
For SP1 the latest CU is CU5 : http://support.microsoft.com/kb/2978017/en-us
Benoit Lecours | Blog: System Center Dudes

How to uncheck "install new versions automatically" from INTERNET EXPLORER 11 from SCCM 2012

We have deployed "Internet Explorer 11" application through SCCM 2012 console .the deployed application was customized using "Internet Explorer customization wizard 11" tool.
issue:
we are getting "install new versions automatically" check box as checked
when we see from help about "about internet Explorer"
seeking solution:
how to uncheck "install new versions automatically" check box from SCCM 2012 console.
please let me know if we have any solution for this instant
thanks,
Gc.Hanumareddy

Hi,
For option: "install new versions automatically", we can simply prevent it via GPO or registry (the registry entry can also be deployed via GPO)
Computer Configuration - Administrative Templates - Windows Components - Internet Explorer - Install new versions of Internet Explorer automatically
Or
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Main]
"EnableAutoUpgrade"=dword:00000000
Yolanda Zhu
TechNet Community Support

Win PE 4.0 SCCM 2012 R2

Hi
Wondering if somebody could assist - Have an environment where there is a requirement to upgrade from SCCM 2012 RTM SP1 to SCCM 2012 R2 with CU 1.
There are multiple Boot Images created already that are managing a Windows 7 deployment.
Due to the Windows 7 Deployment I am reluctant to move to WINPE 5.
Is there anyway of upgrading to SCCCM 2012 R2 without a requirment to rebuild the WIN PE Bootimages and still have customisible/managable WINPE 4.0 Boot Images through SCCM 2012 R2.
Any guidance is appreciated
RDunne76

Hi,
it is possible to deploy Windows 7 using WinPE 5.0 without issue (like Torsten mentioned before)
If you want to use WinPe 4.0 have a look at this description:
Customizing WinPE 3.1
and WinPE 4.0 boot images for use in ConfigMgr 2012 R2
Greetings
Eric
Eric Berg -- http://www.ericberg.de -- MCSE: Private Cloud MCSE: Server Infrastructure MCSE: Desktop Infrastructure

Satellite L50-A-1d5 - cannot install Win 7 (32bit or 64bit)

Hi guys.
Very strange problem when i trying to install win 7.
I changed the bios setting to boot from cd and it works graet.
After the windows 7 install finish, the laptop resets and when the Windows 7 flag appears it's just freeze.(the keeps moving but nothing happend).
I allready tried 3 versions of windows 7 and always the same problem.
I also use Arconis via Hiren's and i cleaned the hard drive and installed again but..... the same problen accured.
any suggestions??
thanks a lot

What BIOS settings did you change exactly?
Usually you need to disable the secure boot and have to change the boot mode from UEFI to CSM mode.
By the way: did you use the clean original Microsoft installation disk to install the system or did you use an image backup for OS installation?

Recover Satellite C850-F12S - currently installed Win 8.1

hi!
i bought my Satellite C850-F12S with Win 7 Starter now i installed Win 8.1 and i want to restore it to its original state back to Win 7 Starter but dont know how to do that.
I didnt create recovery image so m lost on how to recover it.
Anyone help me please

If you did not create the recovery medium in the past, then you will not be able to recover the notebook.
The HDD recovery isnt possible anymore because the HDD recovery partition was deleted during Win 8.1 installation.
You have only one option to do that: you have to order such recovery disk:
http://backupmedia.toshiba.eu/landing.aspx

Cannot install Win 8 on a late 2013 iMac using bootcamp on 10.9

I'm trying to install Win 8 on a late 2013 iMac (purchased a couple of months ago)
I have a win 8 pro DVD, but obviously there is no DVD in this iMac. I usally use the DVD drive in my older 2009 iMac for any disk based installs but I can't appear to use it here.
I followed the instructions and downloaded a Win 8 Pro ISO from Microsoft to use with my authentication code, created a bootable USB using bootcamp, created the partition and rebooted. Once I'd entered the code I get to the install location but it says I cannot install on the partition created by bootcamp. Even if I format the partition it says I need a GPT drive but I have MBR, so won't let me install.
I tried several suggestions including creating aprtitions in various other programs and once I even got past that screen, but as soon as it tried to install I got another error saying the MBR was formatted incorrectly and it failed.
I had no issues installing Win 7 via bootcamp on the older iMac, but this one has me stumped. I used to think I knew a bit about computers, but I'm fairly new to Mac related issues as the older iMac has always just worked.
Any help would be greatly appreciated.

Hello,
I just installed Windows 8.1 on my Late 2013.
There are just a couple of things I had to do that deviated from the Boot Camp Installation Manual.
1. I downloaded my copy of Windows 8.1 as an ISO image AND as a bootable USB from the Microsoft site.
Not sure why I did that but it came in handy because Bootcamp was taking a very long time to copy the ISO onto the USB stick..
The ISO copying seemed to freeze up, but it's likely that it was just taking a long time, probably 20mins.
So, instead of waiting, I took the contents of the the USB startup stick and simply moved them over to the stick that Bootcamp had formatted for the ISO copy (I cancelled that copy function and deleted any files that had copied but didnt complete).
Once that was done, the machine rebooted from the USB stick and began the normal Windows setup process.
All went very smoothly except that my mouse was not working.
2. To get around the mouse issue, I simply plugged in a MS USB Mouse and it worked immediately.
The Bootcamp manual advised that the way around this was to 'click in upper right corner and search for Bootcamp'. Problem was, it was nowhere to be found.
So, using my MS mouse, I navigated to the 'DESKTOP' icon in Win 8.1 and found File Explorer, which showed my USB stick connected along with Bootcamp and the MS Support File (i.e. All the Apple Drivers).
I began manually clicking on all the driver files until realizing that there IS a Bootcamp executable which will automatically install the drivers for the Nvidia card, keyboard, camera, mouse, etc....
Once that was done, my installation was completed.
The entire process took about an hour, but now that I've done it, it really shouldnt take much more than 45 mins.
I have the late 2013 iMAC, with the GTX780M and 1TB Fusion Drive i5 Quad Core.
For those who are leery about doing this, please note that I'm a PC 'lifer' and this is my very first go-around with doing anything on an Apple product.
It all went much more smoothly than I could have imagined, but if you are not a PC person, you might be a little challenged finding the Bootcamp in File Explorer or doing anything in Win 8.1 to get over these minor hurdles.
Good luck!
I'm looking forward to getting STEAM up and running to see how this thing games!

Cannot install WINS Server Role on Windows Server 2008 R2 Standard x64

Hi,
We are trying to install WINS Server Feature on a brand new Windows Server 2008 R2 Standard x64 (Virtual Machine). It seems that WINS is getting installed and right at the very end it gives an error 0x80070002.
We have tried rebooting the server multiple times , DNS/DHCP roles have been installed successfully as
well . It is just the WINS server feature that we are unable to install on this server.
Can someone point us to right direction. Are there any pre requisites we need to ensure before installing this feature. Are there any alternate ways to install
the WINS feature .. if yes please let us know.

The error indicates a File was not found:
C:\Users\Mark\Documents\Tools>err 0x80070002
# for hex 0x80070002 / decimal -2147024894
COR_E_FILENOTFOUND
corerror.h
# MessageText:
DIERR_NOTFOUND
dinput.h
DIERR_OBJECTNOTFOUND
dinput.h
STIERR_OBJECTNOTFOUND
stierr.h
# as an HRESULT: Severity: FAILURE (1), FACILITY_WIN32 (0x7), Code 0x2
# for hex 0x2 / decimal 2
ERROR_FILE_NOT_FOUND
winerror.h
# The system cannot find the file specified.
# 5 matches found for "0x80070002"
I would check a few things:
1) Is the OS activated (Control Panel/System)
2) Is the OS fully patched and has it been rebooted since it was patched?

Cannot install win xp by boot camp

acturally, I install the Win Xp sp2 before, but I found the network very unstable, so I uninstall it. and the HD has already separated in two parts. however, when I want to install the win xp sp2 again, the Boot Camp showed that it cannot install in the HD which has two parts. to , How can I combin the two parts as original? use boot camp or others? thank you so much`!!

My guess is you deleted the Windows OS not using Boot Camp Assistant (which for future reference is the easiest way to to do it) & now you have an empty partition plus the normal OS X one, what you call 'separated parts.'
If so, just as the Boot Camp documentation mentions, Boot Camp Assistant will refuse to set up the drive for Windows since it only does this for a drive with a single OS X partition.
One simple solution is to run Disk Utility, select your HD from the list (not the volume name like "Macintosh HD" indented under it), & click on the "Partitions" tab. Locate the empty Windows partition in the window -- it should be the lower one of the two you see -- & click the minus button to remove it. Then drag the tab at the bottom right of the OS X partition down all the way to the bottom so that it uses all the space the just deleted partition occupied. Click Apply, wait for the procedure to end, & quit Disk Utility.
Now run Boot Camp Assistant again, following the instructions in the documentation, & it should be fine.

Satellite P300-156 - Cannot install any OS

Hi
i have had a P300-156 for some time now.
It was fine up untill recently, when the DHCP client stopped workin and wouldnt start,
So i tried to restore from disc and had no dice with that attempt.
So i attempted to recover from HDD again no luck the laptop keeps freezing after the install.
So i tried to install Ubuntu on the laptop but again same problem, linux says "Buffer error I/O sdo" ??
I'm not sure what that is, it did however manage to wipe the entire drive.
And i cannot XP to install because it wont find the HDD.
So the situation is that i have no recovery methods and cannot install another OS.
Guys im really confused about what to do here, so if anyone can help please i need it.

Hi James
Im not quite sure if your HDD died or not but you should know that your Win XP Setup will not recognize the HDD too if the SATA driver was not included.
The point is that your P300 was equipped with the SATA HDD controller and the SATA driver is necessary and needed if you want to install any of the operating system.
The SATA driver is a part of the Intel Matrix Storage Manager.
So if you want to install the XP on your P300 you should firstly include the SATA drive into the XP installation CD.
This can be done very easily using a free software called nLite.
This Toshiba doc would be helpful for you because if describes step by step how to include a SATA driver;
Check this:
[How to integrate a SATA AHCI driver in a Windows XP Setup CD|http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]
bye

Satellite A210-183: cannot install Realtek RTL8187B WLAN under XP

Hello
I have downloaded from the Toshiba download section the driver: RTL8187B_5_6.1135.0625.2008_Silent_Install , but when i try to run the setup i get that the setup has encoutered a problem..
When i try to install manually the driver from device manager I get the message; driver isn't appropriate for that hardware: "The specified location doesnt contain ifo about your hardware"
What can i do???

Hello
I don't know for sure but maybe it has something to do with wrong installations order. The right installations order for this Satellite model is as follow:
WXP SP2
ATi Display Driver V8.401-070815m-052613C
CardBus Controll /Card Reader Driver Memory Stick 6.0.1.10
Synaptics TouchPad Driver V10.0.11.1
Realtek Audio Driver
TOSHIBA Software Modem
Realtek Wired LAN Driver V5.674.807.2007
Realtek WirelessLAN 802.11a/g Driver V5.1097.718.2007
Bluetooth Stack for Windows by Toshiba
Bluetooth Monitor V3.01 (Build 20070215)+ReadMe1st
UPEK Finger Print Driver version
Chicony Camera
TOSHIBA Common Modules
TOSHIBA Hotkey Utility
TOSHIBA Touchpad ON/OFF Utility
TOSHIBA Utilities
TOSHIBA Power Saver
... and so on
Have you started installing all stuff following this order? I don't have experience with Realtek drivers but maybe it is important to install all stuff in this specific order.

Satellite Z930-14F - cannot install Win 8.1 from SCCM 2012 R2 environment

Similar Messages

Maybe you are looking for