SatelliteA300: standby or hibernate fails with network cable connected

I am unable to get my laptop to stay in standby or hibernate for more than a minute, unless I remove the router cable.
All programs have been stopped first, no other viruses have been detected or other unexpected behaviour.
Can anyone advise please?
Thanks
M

Hi
Maybe you should disable the Wake up on LAN in BIOS.
Check it!

Similar Messages

S20 Won't boot to windows with network cable connected

S20-4157, Windows 7 x64
Every time I reboot my machine, I have to unplug the network cable. I can plug it back in after I log in. If I don't, it gets stuck on the windows startup screen.
I think this is related to the lenovo power manager. I get the following event log error on boot:
The following boot-start or system-start driver(s) failed to load:
TPPWRIF
When I go to control panel, and start the power manager app, it does not start. Locked up with splash screen. I tried uninstalling the program as well, and cannot. Get an "unable to run on this system" message when I try to uninstall.

That's odd to say the least. DId this app come installed from the factory? I'm not sure why a thinkpad power manager utility would be included in our preloads. The fact that you're not able to uninstall it sort of concerns me. Have you tried uninstalling via safemode or when logged in as administrator?

I connected the TC T2 with the iMac and used Air Port Utility to have it join my existing network. Now I have green lights on Apple Base Station and TC with the cable connected to the Base Station because hen connected to TC -- I get only yellow lights fl

I connected the TC T2 with the iMac and used Air Port Utility to have it join my existing network. Now I have green lights on Apple Base Station and TC with the cable connected to the Base Station because hen connected to TC -- I get only yellow lights flashing on both devices>
When Connected through the Apple Base station I have perfect internet wireless capability thru-out house.
Lamont

I connected the TC T2 with the iMac and used Air Port Utility to have it join my existing network. Now I have green lights on Apple Base Station and TC with the cable connected to the Base Station because hen connected to TC -- I get only yellow lights flashing on both devices>
When Connected through the Apple Base station I have perfect internet wireless capability thru-out house.
Lamont

Since Mavericks Upgrade iMac won't shutdown with network cable plugged in

Since Upgrading to Mavericks my iMac won't shutdown - just stays on grey timer screen.
I tried multiple fixes from forum suggestions.
If I unplug the network cable it seems to shutdown fine.
How can I fix this issue?

I am working with a T42 (old computer) and it will not boot into Windows with network cable plugged in. It hangs just after the Windows splash screen. Unplug the cable turn off and back on and it works fine.

Startup Chimes with audio cable connected?

My Mini has started to sound it's healthy startup chime even when there is an audio cable connected to the audio/headphone output. The output works fine and sends audio to the speakers, but how can I mute the chime at startup?
Previously it always muted that sound with a cable connected and I believe it started chiming when I updated to 10.5.4.
TIA.

The mini generates the startup chime via the internal speakers regardless of whether external speakers are connected or not - the necessary support for the hardware audio port isn't loaded until after the power-on self test (which is what generates the chime) so in common with the iMac range, the chime comes from the internal speakers.
The only way to mute the chime at startup is to set the Sound preference pane to Mute (check the 'Mute' box in the Sound Effects tab). There are also some utilities such as Startup Sound (http://www5e.biglobe.ne.jp/~arcana/index.en.html) which variously succeed in muting the chime, though these tend to get broken with MacOS updates.

P2V Failed with the Error : "Connection closed at byte 11086778368. Giving"

hi,
P2v gets failed with the error: Connection closed at byte 11086778368. Giving up
i checked the p2v log from /tmp/
10826600K .......... .......... .......... .......... .......... 12% 18.5M 60m9s
10826650K .......... .......... .......... .......... .......... 12% 22.0M 60m9s
10826700K .......... .......... .......... .......... .......... 12% 22.1M 60m9s
10826750K .......... .......... .......... .......... .......... 12% 21.5M 60m9s
10826800K .......... .......... .......... .......... .......... 12% 4.69K 61m26s
10826850K .......... .......... .......... .......... .......... 12% 15.7M 61m26s
10826900K .......... .......... .......... .. 12% 1.50K=8m52s
13:29:53 (19.9 MB/s) - Connection closed at byte 11086778368. Giving up
please suggest if anybody had come across with problem....

Raja Kondar wrote:
P2v gets failed with the error: Connection closed at byte 11086778368. Giving upDo you have enough drive space on the target server? You'll need at least 3x as much drive space as is available on the physical box you're converting. For example, if your physical server has a 72GB disk, you'll need ~200GB of free disk space on the Oracle VM Server.

No audio with HDMI cable connect - need optical cable?

I have just connected my AppleTV 2 with my Pioneer ELITE 910 HD Plasma TV system. I have a hard wire ether net connected. I have a great picture coming out of the HDMI connection from AppleTV plugged into my ELITE 910 HDMI Media Receiver. But I am not hearing audio. I have gone through the 'settings' menu on the AppleTV screen and have every setting correct (I believe) It might appear that I may have to purchase an Optical Digital Audio Cable that would input into my Pioneer ELITE VSX-54TX receiver (that does have an Optical Digital Input that has not been used.)
Am I on the right track? I was hoping the video AND audio would travel through the HDMI connection. I don't want to spend money on the cable if I don't need it.

Re: No audio with HDMI cable connect - need optical cable?
Yes, audio and video should go via HDMI.
Do other peripherals work ok with the pioneer over HDMI.
My LG BlueRay player works fine. My TIVO works fine -- good audio and video
AppleTV is a bit odd with audio at times.
Does the pioneer media box handle doilby digital and linear PCM?
I don't know what "linear PCM" is. All the specs on this 2004 system are here:
http://plasmatvbuyingguide.com/plasmatv/pioneer-pro910hd.html
If you have Dolby Digital set to Auto I'd expect you to get some audio - if set to On and media box can't decode DD then you may get no sound.
Try cycling those settings as well as the one for audoo bit depth.
Have done all this. Still no audio

Time Machine and Time Capsule - Failing with Network Problem

My problems with TM/TC have been ongoing for a couple of months now and I am going round in circles - need help.
This is the second post I have made, the first got lost in people suggesting the obvious - so I will try to be a little more specific if I can.
I will detail the current state first - i.e. where I am now - after I will list what I have done so far to get to this point.
Currently, my iMac (intel) is directly connected by Ethernet 1GB to the Time Capsule. The TC is then connected to a Netgear router which in turn is connected to Internet.
I have no network problems at all - internet connection is fine. the Netgear Router has the latest firmware version and is working fine. The porblems i have are nothing to do with this.
The time Capsule is in Bridge mode and getting a reserved dhcp IP address from the Netgear router.
The Time Capsule has been fully reset - i.e. power cable out, hold the reset button, plug in power cable (spark, spark), hold reset button, fast blink for 20 seconds or so, light goes out, release button.
I have re-applied the latest Time Capsule firmware.
I have renamed the disk on the Time Capsule.
I have renamed my iMac and deleted all the time capsule entries from Keychain.
I have re-installed Mac OSX and re-updated to the latest 10.5.6 release.
At the moment I have kicked off a backup with a lot of large files - like music folder, video folder etc excluded. I also have parallels and have excluded the disk image. I have 1 other 50GB disk image which is also excluded.
I am expecting the first initial backup will complete successfully.
I will then remove music and video from exclusions and allow them to backup. I am expecting this will complete no problem. (I do this because the upcoming problem will happen if I move away from the machine - and I dont want to sit there for 2 days).
So up to this point TM and TC have performed flawlessly. The issue that follows started happening before the 10.5.6 update after backing up with no issues for months. At this point I will be able to use TM to browse the backup and restore files. I will be able to mount the sparse bundle and browse files. Spotlight reports no issues and indexes quickly.
If I leave my machine after a successful backup and the hourly update kicks in it will fail with 'A Network problem' basically saying the backup has filed because of a network problem, but is not any more specific, logs show far too much to put the whole thing here, but the following is an excerpt
Dec 23 05:19:49 MickMac /System/Library/CoreServices/backupd[1499]: Backup destination mounted at path: /Volumes/Backup
Dec 23 05:19:50 MickMac hdiejectd[1519]: running
Dec 23 05:19:51 MickMac kernel[0]: jnl: disk1s2: replay_journal: from: 28864512 to: 30084096 (joffset 0x1d0f000)
Dec 23 05:21:49 MickMac kernel[0]: jnl: disk1s2: journal replay done.
Dec 23 05:21:49 MickMac /System/Library/CoreServices/backupd[1499]: Disk image /Volumes/Backup/MickMac_001ec215ce76.sparsebundle mounted at: /Volumes/Backup of MickMac
Dec 23 05:21:49 MickMac /System/Library/CoreServices/backupd[1499]: Backing up to: /Volumes/Backup of MickMac/Backups.backupdb
Dec 23 05:21:49 MickMac com.apple.launchd[1] (com.apple.netauth.sysagent[1500]): Stray process with PGID equal to this dead job: PID 1503 PPID 1 check_afp
Dec 23 05:21:55 MickMac fseventsd[38]: event logs in /Volumes/Backup of MickMac/.fseventsd out of sync with volume. destroying old logs. (3627 125 5482)
Dec 23 05:27:33 MickMac /usr/sbin/ocspd[1539]: starting
Dec 23 05:30:27 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 5 reqID 5400 flags 0x9 afpCmd 34 so 0x7e78cc0
Dec 23 05:30:27 MickMac kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x7e78cc0
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Backup prevTrigger 0 currTrigger 1
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot -1 error 89 reqID 1 flags 0x9 afpCmd 0 so 0x7e78cc0
Dec 23 05:31:26 MickMac KernelEventAgent[34]: tid 00000000 received VQ_DEAD event (32)
Dec 23 05:31:26 MickMac KernelEventAgent[34]: tid 00000000 type 'afpfs', mounted on '/Volumes/Backup', from 'afp_0V1fqC1mgalO00mE1H0Pyetl-1.2d00000a', dead
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Open Session failed 57 /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: max reconnect time reached 60 > 30 /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: posting to KEAType IO] [ErrNo 5] [IOType Read] [PBlkNum 1248] [LBlkNum 155] [FSLogMsgID 501572642] [FSLogMsgOrder First]
Dec 23 05:31:26 MickMac kernel[0]:
Dec 23 05:31:26 MickMac fseventsd[38]: failed to unlink old log file /Volumes/Backup of MickMac/.fseventsd/0000000000ccb02b (Input/output error)
Dec 23 05:31:26 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED)."
It goes on and on and is repeated every hour. For each one I get an error message on screen saying backup failed due to a network error. However I have tried a manual download over the same period set at an extremely slow rate so that it was downloading during this time and it showed no errors. I.e. the network connection from imac, through TC to netgear and out to internet - and monitored this while time machine showed these errors (i.e. at the same time) and this showed no connection problems at all and completed succesfully.
I know TM uses an internal address to do backups, but uses the same cable and network card to get the job done. I am simply removing the cable as a source of issue although I have also replaced this making no difference.
Applecare are involved and have so far been sent 2 sets of logs and so far have not been able to find the cause. New TC is on its way to try that, although they think it is something on the imac that is causing this.
Sleep mode is turned off although screen sleep is on. The tick is not in the box for putting hard drives to sleep whenever possible.
Now, after this has happened, and back at the machine. I restart both imac and TC. Try running a backup, spotlight starts to re-index - i.e. will mount the backup volume and start the index process, gets to about 90% then fails - again excerpts from log
"Dec 23 09:18:50 MickMac /System/Library/CoreServices/backupd[161]: Backing up to: /Volumes/Backup of MickMac/Backups.backupdb
Dec 23 09:18:50 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexCI in ContentIndexOpenBulk:Unclean shutdown of /Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/li ve.0.; needs recovery
Dec 23 09:18:57 MickMac com.apple.launchd[67] (com.apple.netauth.useragent[147]): Stray process with PGID equal to this dead job: PID 152 PPID 1 check_afp
Dec 23 09:19:48 MickMac mds[32]: (Error) Server: machmsgdispatch: (ipc/send) invalid destination port [msgh_id 14016]
Dec 23 09:29:35 MickMac /usr/sbin/ocspd[197]: starting
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 11 reqID 3204 flags 0x9 afpCmd 60 so 0x8051b28
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 12 reqID 3205 flags 0x9 afpCmd 34 so 0x8051b28
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x8051b28
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Backup prevTrigger 0 currTrigger 1
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Logging in with uam 10 /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Restoring session /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot 11 error 35 reqID 3204 flags 0x19 afpCmd 60 so 0x8051b28
Dec 23 09:42:49 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot 12 error 35 reqID 3205 flags 0x19 afpCmd 34 so 0x8051b28"
And later....
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x39 (UNDEFINED).
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 received VQ_DEAD event (32)
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: hfs_clonefile: cluster_read failed - 5
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 type 'afpfs', mounted on '/Volumes/Backup', from 'afp_0V1fqC1mgalO00mE1H0Pyetl-1.2d000005', dead
Dec 23 09:45:49 MickMac kernel[0]: HFS resolvelink: can't find iNode791959
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x39 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]: ore-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431/store.db] [FSLogMsgID 1580919258] [FSLogMsgOrder Last]
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 found 1 filesystem(s) with problem(s)
Dec 23 09:45:49 MickMac kernel[0]: jnl: disk1s2: dojnlio: strategy err 0x5
Dec 23 09:45:49 MickMac kernel[0]: jnl: disk1s2: end_transaction: only wrote 0 of 49664 bytes to the journal!
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexSDB in dbcheckdatastore:store.db : dbgetdatastore: ERR: could not read 4096 bytes
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexCI in CIMetaInfoSync:write err: 5
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed /Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexSDB in adddirtychunk:/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/st ore.db : ERR: Can't write DST header (Input/output error)
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexSDB in dbflushdatastore:/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/st ore.db : dbsyncdatastore: write-errors flushing cache/writing map.
Am I the only one having these problems? any help from anybody please...

Got the same problem with a 3 months old TC.
The replacement TC, does it work now flawless?

WebDav using https fails with network name cannot be found.

When I attempt to connect to a Webdav server from a Windows 8.1 box it fails with
System Error 67 has occurred.
The network name cannot be found.
I am using the net.exe USE command with the following syntax:
net.exe use Z: https://dav.DomainYaya.com/ <PASSWORD> /user:USERNAME
This exact syntax works for Windows 7.
I have more than one Windows 8.1 box where this fails.
There are various suggestions found all over the internet for various other situations. They do not apply or do not work.
For example, you will find an issue involving sending Basic authentication over http where there are suggestions about changing HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WebClient\Parameters
That does not work. There is also discussion about the Webclient service. (it is running). One can find discussion of the redirector. (The SYS file is present and is installed with Windows 8+ anyway.)
Using HTTP only fails similarly but with error 53 (but I only did that as a test.) The issue is the HTTPS version.
I have BTW tried this with two different webdav servers.
Any help is appreciated.
Joe

Hi Joe,
Based on our research, the error 67 have the following several possable causes:
•IIS is not installed or is not running on the server that you are attempting to connect to.
•You have not installed the WebDAV Redirector on your client system.
•The WebClient service is not running on your client system.
•You have not enabled WebDAV on your web site.
•You are using Basic Authentication and connecting to your web site using HTTP instead of HTTPS.
•You are connecting to a web site on your local network that is using Fully-Qualified Domain Names (FQDNs) for name resolution, your web site uses Windows Authentication, and you have not added the web site's FQDN to the proxy server bypass list on your client.
For more information, please refer to the article as below:
Using the WebDAV Redirector
http://www.iis.net/learn/publish/using-webdav/using-the-webdav-redirector
According to the test, I am able to reproduce this issue in my lab. By default, the Webclient service is not running on windows 8.1 client. But for windows 7 client this service is running by default.
So please try to start the WebClient service on windows 8.1 client to check if it helps.
If you have any question, please don't hesitate to let us know.
Karen Hu
TechNet Community Support

HP P2055dn locks up when network cable connected

We have just moved offices on a university campus and our HP LaserJet P2055dn locks up as soon as a network cable is connected to it. The control panel locks up and none of the menu buttons do anything.

After re-installing iTunes, and doing a full restore on my iPod, I have determined that it was some album cover art that seemed to be causing the problem. The iPod would start to sync, and then hang on one song. Deleted that song, and it synced a little more, and got hung up again on another song from the same album.
I deleted the entire album from my iTunes library, and the iPod synced just fine. I re-ripped the CD in question, this time with out adding ablum cover art, and it worked perfectly.
Now I wonder why iTunes is getting stuck on certian album cover art. The CD in question is Eric Clapton's "Crossroads". iTunes was unable to retreive the album cover art when I ripped the CD [perhaps because iTunes has it listed as "Crossroads (Box Set)"], so I just scanned the cover of the CD and added it that way. I have done this with other CDs, and had no problems what so ever. Anyone have any clue as to why this would happen?

Grid installtion failing with error Cannot connect to Node Manager. : Conf

I am trying to install Grid, however its failing with following error
I installed Weblogic server 10.3.4 and 11g R2 database
==============================================================
Code of Exception: Error occured while performing nmConnect : Cannot connect to Node Manager. : Configuration error while reading domain directory
Use dumpStack() to view the full stacktrace
Thu Mar 03 21:49:03 IST 2011
<traceback object at 1>
Connecting to Node Manager ...
This Exception occurred at Thu Mar 03 21:49:03 IST 2011.
Thu Mar 03 21:49:03 IST 2011
SEVERE: Exception: during stop of admin server
Thu Mar 03 21:49:03 IST 2011
Name of Exception: main.WLSTException
Thu Mar 03 21:49:03 IST 2011
Code of Exception: Error occured while performing nmConnect : Cannot connect to Node Manager. : Configuration error while reading domain directory
Use dumpStack() to view the full stacktrace
Thu Mar 03 21:49:03 IST 2011
<traceback object at 2>
Connecting to Node Manager ...
This Exception occurred at Thu Mar 03 21:49:03 IST 2011.
Thu Mar 03 21:49:03 IST 2011
Node Manager is not running
Mar 3, 2011 9:49:03 PM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil execCommand
INFO: error messages of the command :
weblogic.nodemanager.NMException: Configuration error while reading domain directory
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:301)
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:249)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:200)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:206)
at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:53)
at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:179)
at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx2.nmConnect$3(<iostream>:118)
at org.python.pycode._pyx2.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.pycode._pyx41.stopManagedServer$6(/u02/oracle/Oracle/Middleware/oms11g/sysman/omsca/scripts/wls/start_server.py:142)
at org.python.pycode._pyx41.call_function(/u02/oracle/Oracle/Middleware/oms11g/sysman/omsca/scripts/wls/start_server.py)
at org.python.core.PyTableCode.call(Unknown Source)

I am still getting error, even after installing Weblogic server 10.3.2
ar 4, 2011 10:44:42 AM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil execCommand
INFO: error messages of the command :
weblogic.nodemanager.NMConnectException: Connection refused. Could not connect to NodeManager. Check that it is running at node1.slksoft.com:7,403.
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:525)
at weblogic.nodemanager.client.SSLClient.createSocket(SSLClient.java:38)
at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:227)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:199)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:205)
at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:52)
at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:175)
at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:168)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
and also i am getting below error.
oracle@node1 grid]$ export ORACLE_SID=prod
[oracle@node1 grid]$ emctl status agent
EM Configuration issue. /u01/oracle/product/11.2.0/db_1/node1.soft.com_prod not found.
[oracle@node1 grid]$

Laptop and Network cable connection

I am thinking of buying the HP - 17.3" Pavilion Laptop - 8GB Memory - 750GB Hard Drive - Dark Umber laptop [ http://www.bestbuy.com/site/HP+-+17.3%22+Pavilion+Laptop+-+8GB+Memory+-+750GB+Hard+Drive+-+Dark+Umbe... ]
But I want to be able to hook it up to my cable internet connection instead of going wireless. Can it do this [out of the box ] or do I need to adapt it somehow, or find another machine?
Regards,
Chuck {Removed per Forum Guidelines}

No, all you need is a Cat-5 or Cat-6 network cable.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

Tuxonice hibernate fails stopping network

I just started using the kernel26tp for aur on my T60 thinkpad and am trying to get tuxonice to work for hibernation. The problem seems to be with stopping the network. I use netcfg2 from testing to connect.
hibernate.log
Resumed at Sat Mar 1 00:53:47 PST 2008
Starting suspend at Sat Mar 1 15:52:52 PST 2008
hibernate: [01] Executing CheckLastResume ...
hibernate: [01] Executing CheckRunlevel ...
hibernate: [01] Executing LockFileGet ...
hibernate: [01] Executing NewKernelFileCheck ...
hibernate: [05] Executing XStatusSuspendBegin ...
hibernate: [10] Executing EnsureSwsusp2Capable ...
hibernate: [11] Executing XHacksSuspendHook1 ...
hibernate: [20] Executing XStatusProgress ...
hibernate: [30] Executing ServicesStop ...
hibernate: [30] Executing XStatusProgress ...
hibernate: [40] Executing XStatusProgress ...
hibernate: [50] Executing XStatusProgress ...
hibernate: [59] Executing RemountXFSBootRO ...
hibernate: [60] Executing NetworkStop ...
Bringing down interface wmaster0
Bringing down interface wlan0
Bringing down interface irda0
hibernate: Aborting suspend due to errors in NetworkStop (use --force to override).
hibernate: [60] Executing XStatusProgress ...
hibernate: [60] Executing NetworkStart ...
Bringing up interface irda0 (from auto)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:20 errors:0 dropped:0 overruns:0 frame:0
TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1000 (1000.0 b) TX bytes:1000 (1000.0 b)
wlan0 Link encap:Ethernet HWaddr 00:1B:77:08:AB:A2
inet addr:192.168.0.4 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::21b:77ff:fe08:aba2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:420 errors:0 dropped:0 overruns:0 frame:0
TX packets:433 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:311720 (304.4 Kb) TX bytes:89616 (87.5 Kb)
wmaster0 Link encap:UNSPEC HWaddr 00-1B-77-08-AB-A2-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Bringing up interface wlan0 (from auto)
Bringing up interface wmaster0 (from auto)
hibernate: [59] Executing RemountXFSBootRW ...
hibernate: [50] Executing XStatusProgress ...
hibernate: [40] Executing XStatusProgress ...
hibernate: [30] Executing XStatusProgress ...
hibernate: [30] Executing ServicesStart ...
hibernate: [20] Executing XStatusProgress ...
hibernate: [15] Executing XStatusProgress ...
hibernate: [11] Executing XHacksResumeHook1 ...
hibernate: [05] Executing XStatusProgressKill ...
hibernate: [01] Executing XStatusReportErrors ...
hibernate: [01] Executing NoteLastResume ...
hibernate: [01] Executing LockFilePut ...
hibernate: [00] Executing RemoveSwsuspProcCruft ...
Resumed at Sat Mar 1 15:52:55 PST 2008
The lines in common.conf are:
### network
DownInterfaces auto
UpInterfaces auto
I also tried specifying each of my network devices and had the same result.
Any suggestions on where to go from here to get this working?

Hi
Maybe you should disable the Wake up on LAN in BIOS.
Check it!

Hibernate fails with open source radeon driver

I have set up hibernate properly and it worked on Catalyst.
Today I switched to the open source driver and I can't put my computer in hibernate or hybrid sleep mode. When I try, both of my monitors turn off then immediately turn back on with a completely blank picture. They both report that they are getting the correct mode for them. At this point my HDD led is not blinking (I'm pretty sure the HDD itself has stopped, didn't check), and the reset button is ineffective. If I forcefully power of the PC and turn it back on it boots as if nothing has happened.
I tried linux-ice and uswsusp but neither solved my problem.
Further debugging shows that this is due to KMS (booting with nomodeset lets me hibernate successfully but I'd like to run X). Using the kernel documentation's debug procedures (https://www.kernel.org/doc/Documentatio … ugging.txt) I found that it happens when the kernel suspends devices. I can't really provide much more info unless you guys know how to squeeze it out of the kernel.
It's worth mentioning my GPU is an HD7970 (I can list other things if needed), and that the driver works perfectly fine otherwise. I do recall that hibernating worked at one point but I can't remember when it was broken as I first discovered the bug a few months ago after switching back from catalyst.
I found some guy on the Gentoo forums with the same issue (http://forums.gentoo.org/viewtopic-p-7642484.html) so it might be an upstream bug in the driver. If anyone could shed some light or tell me where to report this bug in particular (kernel ? freedesktop.org ?) I'd be grateful.
Thanks in advance.
Last edited by Streetwalker (2014-12-23 19:56:07)

Alright I found the culprit. Adding radeon.dpm=0 to the kernel command line lets me hibernate on the current kernel. I lose power management but it's fine for now, will definitely check things out in the source when I have time.

Creating physical standby using rman fails with ORA-19558: error de-allocat

Dear All,
We are creating physical stadnby database from 2 node RAC ( 2 node RAC to standalone physical standby).
While in the rman duplicate process we are getting below error, we were not able to sorted out..
No third party storage has been used ....
DB version : 11gR2 and the OS is RHEL5
Appreciate if any one hepl us to resolve this issue ...
Thanks in advance ...
RMAN-03009: failure of backup command on prmy1 channel at 10/05/2011 17:59:26
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03113: end-of-file on communication channel
Edited by: 889828 on 2011/10/06 2:17 AM

The problem is well decribed in your alert log.....you are using Oracle Managed File names which means you will not be able to duplicate the database as RMAN won't be able to automatically generate new names for the files using the DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT initialization parameters.
Youll have to use the SET NEWNAME command to specify the names of the database files. Done this a few times , and I don't recommend using OMF specifically beacuse of this hassle.
WARNING: OMF is enabled on this database. Creating a physical standby controlfile, when OMF is enabled on the primary database, requires manual RMAN intervention to resolve OMF
datafile pathnames.
NOTE: Please refer to the RMAN documentation for procedures describing how to manually resolve OMF datafile pathnames.
Problem handling is described in
Oracle® Database Backup and Recovery Reference
10g Release 2 (10.2)
Part Number B14194-03

SatelliteA300: standby or hibernate fails with network cable connected

Similar Messages

Maybe you are looking for