Satelllite A100-773 and WIN 7: Card Reader and Fn-Hotkeys not working

Hi,
I hope that this question was not asked 100 times before. (I haven't found an answer in this forum)
Problem:
Card Reader and FN-Keys are not working, where can i get drivers?
I installed Win 7 Pro on my Satellite A100-773 Notebook. All works fine and Win 7 has all drivers installed but the FN-Keys and the Card Reader are not working.
On the Support Homepage is no driver oder anything given for this Notebook with Win 7.
Can anyone help me with that?
Tahnks.
PS: it was not un upgrade version.

hi at all,
by now i tried the toshiba value added package for serveral model for win 7 and vista, but before finishing the installation there is an error.
the card reader is now working with card reader criver for win vista.
Does no one know how to fix this?!

Similar Messages

SD card reader on Pavilion g7 not working

I have a Pavilion g7 notebook, and lately the sd card reader hasn't been working. I use it to drag music files onto my phone's sd card (I have an adapter) but when I tried to do so today, it kept saying the drive was busy although it wasn't.
I read through the forum and kept seeing the recommendation to reinstall the Realtek SD reader. SO I did that, yet nothing has happened. Please help! I would love to have my music on my phone

FYI - to fix problem i had to do a manual install from Device Manager using the "have disk" feature. From that popup, pick the SD Reader, then Ricoh as the manufacturer, THEN click on Have Disk and choose the location for the extracted driver (C:\WIN\DRIVERS\MEDIA).
Good luck!

I just bought a Quantaray All-in-one card reader. It does not work with my Macbook OSX.

I just bought a Quantaray All-in-one card reader. My Macbook OSX does not seem to read it. I have tried attaching it with iphoto on both before and after attaching the card reader to the computer and also have tried another card. Directions say that a green light should come on to prove that connection has been made; I only get a red light. I am Europe with no help and am desperate. Can anyone out there please help? Thanks.

There is no way to use the Thunderbolt display with a computer that has no Thunderbolt port.
Swap the display for the Mini DisplayPort version
<http://store.apple.com/us/product/MC007LL/A/apple-led-cinema-display-(27%22-flat -panel)>
The price is the same.

T450s -- Display, NGFF SSD, Smart Card Reader, and m.2 SSD slots

I'm looking to order a T450s and have a few questions about options when configuring the order:
1080 Display -- Does anyone know if the 1080 display (non-touch) is made by LG or AUO or someone else? There was extensive discussion about the T440s, and people got different brands and the AUO was the preferred brand.
16GB m.2 NGFF SSD -- If I remove this option, and want to add a 3rd party compatible NGFF SSD later, can I do this?
3rd m.2 SSD Slot -- The options are None, 3rd m.2 SSD slot, or Smart Card Reader. If I select the Smart Card Reader option, can I later remove the Smart Card Reader and use it as a 3rd m.2 SSD slot? Or, if I select 3rd m.2 SSD slot and later want to use it for a Smart Card Reader, can I buy a Smart Card Reader and plug it into the slot?

Lenovo uses different FHD diplays for the T450s: one by AU Optronics and the other by LG Display.
However, the T450s uses a different LG display than the T440s. The LG screen of the T450s ("
LP140WF3-SPD1") seems to be much better than the LG screen of the T440s.
If you remove the 16GB M.2 SSD option, you can add a M.2 SSD later.
If you have a device with two M.2 slots, you can't use a M.2 SSD and WWAN at the same time.
If you have a device with three M.2 slots, you can only use single-sided M.2 SSDs in the third M.2 slot.
Both the SmartCard reader and the third M.2 slot are attached to the mainboard via a flexible flat cable.
If you choose the SmartCard reader, the warranty might be lost if you want to use the third M.2 slot, because you have to replace some parts that aren't so-called CRUs (consumer replaceable units).

Compaq 6910p Smart card reader and a sim care

I have a compaq 6910p laptop, what is a Smart card reader and the sim card use for

Hey marionholt,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
I worked on behalf of HP

Hi I am a keen photographer and I have just bought you SD card reader for ipad. This works well but was winding if there is an app that I can view the images on the SD card full screen without having to import them to the iPad or is there a way to do thi

Hi
I am a keen photographer and I have just bought you SD card reader for ipad. This works well but was winding if there is an app that I can view the images on the SD card full screen without having to import them to the iPad or is there a way to do this on the iPad
The reason for buy this was for when I was out and about to get a better view off my images.
I have a iPad 2 16gb
Hope you can help!
Thanks

A couple of weeks ago, (after reading a review in TUAW) I bought a wireless hub/ SD card reader called RAVPower. its app comes with a built in viewer, so you can load it up, and see the pics full screen.

Connection between the ACR122U card reader and an emulated card is failed

Hello,
I write a code to connect the ACR122U card reader and a host-based card emulation on my android 4,4 phone that act as a card. When I run a code, I got this error:
javax.smartcardio.CardException: connect() failed
at sun.security.smartcardio.TerminalImpl.connect(Unknown Source)
at HostCardEmulationCardScanner.run(HostCardEmulationCardScanner.java:18)
at POS$11.actionPerformed(POS.java:567)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
Caused by: sun.security.smartcardio.PCSCException: SCARD_E_SHARING_VIOLATION
at sun.security.smartcardio.PCSC.SCardConnect(Native Method)
at sun.security.smartcardio.CardImpl.<init>(Unknown Source)
... 39 more
what does the "SCARD_E_SHARING_VIOLATION" means?
these are my code line that the error tell:
For POS.java,
@SuppressWarnings("deprecation")
CardTerminal cardTerminal = TerminalUtils.getAvailableTerminal().getCardTerminal();
HostCardEmulationCardScanner cardScanner = new HostCardEmulationCardScanner(cardTerminal);
cardScanner.run();
For HostCardEmulationCardScanne.java
Card card = cardTerminal.connect("direct");
ApduTagReaderWriter readerWriter = new ApduTagReaderWriter(new AcsDirectChannelTag(TagType.ISO_DEP,
null, card));

OK
It's been awile but, I'am sure that we could only
print an index from a card them print photo with that
sys. The G3 was 8.6 upgraded to 9.2 with Photo Shop.
Option was just a thought.
Dennis
Sorry for answering my own question kinda of. I just got my first IMac 3 weeks ago so I am still learning and exploring how to do stuff on my IMac.
Nope in Windows XP it mounts as a network HD under "my computer" and you can copy files to and from any of the cards in printer card reader. It even shows up fine under paralles as network HD drive letter Z:. Does not matter if the printer is connected via USB or Ethernet.
Btw after my first post I started to play with it. I figure a way to manually mount Hp printer's card readers confirmed to work on 2 different printers models Laserjet 2840 and Photosmart 3310. This trick only seems to work if you have your printer connected via ethernet tho. Goto the "Finder" then "Go" then "Connect to a server" and enter "cifs://IP of your printer" dont enter the quote and replace ip of your printer with the ip address of your printer. Btw you must remove the PW protect from printer for this to work. Not sure why if you have a password why it will not work.
So if this work around works to manually mount the card reader in OS X is their a way to make a script or a short cut for mounting the card reader without going and entering the IP of the printer every time I want to use the card reader?

I connected a USB card reader and can't see it.

I connected a USB card reader and cant find it to download the pictures on the card.

To tell you the truth, I don't know. I am pretty knew to Apple products. I did get the card reader to work. All I did was leave the card reader connected and pulled the card out. I waited a little bit and then reinserted and a pop up window came up with all my pictures. I don't know why it didn't work the first few times I tried it. Thanks for the reply babowa.

Not green: No sleep when using integrated card reader and hub in Dell 2709

Hello,
here's a little weird sleep and wake-up problem with a Mac Mini.
I hooked up a Mac Mini Mid 2010 model to a Dell 2709 monitor which has an integrated and self-powered card reader built in and this is connected by USB to the Mac. To the mac this appears correctly as a usb self-powered hub. I am using a so called master/slave power socket to put every periphal to sleep when the Mac enters sleep (stand by) mode. The Mac itself plugs into the Master socket and when turned on it also switches on the Slave sockets, and the monitor. Shutdwon and sleep turns the slaves off. This works good until the monitor USB hub is connected to the Mac. Then, when the Mac enters sleep state, it wakes itself up again within 1-2 seconds. The wake-up reason seems to be the USB hub from the monitor, because the hub looses power due to the master/slave power panel and disconnects from USB, which in turn wakes the Mac up again.
Now, i got also a Bootcamp partition with Windows 7 installed on the same machine. To my surprise this works as expected. It enters sleep state (called StandBy Mode in Windows) without wakening up again immediately by itself. I assume the reason for this different behaviour is just the different approach from the two OS's. OS X wakes up even when disconnecting USB gear, but Windows does not.
It took some hours to find out this. Apparently other users in this forum also have this problem in this particular scenario, like here:
http://discussions.apple.com/thread.jspa?messageID=11031781&#11031781
Unfortunately the topic is unanswered and archived.
What would solve this problem is of course to change the power connection for the monitor in a way that the integrated USB stays powered. That would be pragmatic but not be "green".
Another approach would be to change the behaviour of the Mac to not wake up when a USB device is disconnected - which makes no sense to me personally at all. I'm new to OS X and didn't found any command to achieve this.
Would be nice to make real power saving working again.

Hi David,
thanks for your reply. You mentioned that the hub in the monitor is sending some sort of signal when powered down and this causes the wake up. Good idea. To inspect this i played around a bit with some other different USB gear on the same Mac.
I discovered that any&every device that is disconnected by just unplugging it from the sleeping Mac Mini wakes the computer up again.
This example from the kernel log shows a connected Canon ip4000 printer:
Sep 16 00:26:52 MacMini2010 kernel[0]: AFPSleepWakeHandler: going to sleep
Sep 16 00:26:56 MacMini2010 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
Sep 16 00:26:56 MacMini2010 kernel[0]: System Sleep
Sep 16 00:27:00 MacMini2010 kernel[0]: Wake reason = OHC1 EHC1
Sep 16 00:27:00 MacMini2010 kernel[0]: System Wake
Sep 16 00:27:00 MacMini2010 kernel[0]: Previous Sleep Cause: 5
Sep 16 00:27:00 MacMini2010 kernel[0]: USB (EHCI):Port 4 on bus 0x24 connected or disconnected: portSC(0x101803)
Sep 16 00:27:01 MacMini2010 kernel[0]: The USB device iP4000 (Port 4 of Hub at 0x4000000) may have caused a wake by being disconnected
Sep 16 00:27:02 MacMini2010 kernel[0]: AFPSleepWakeHandler: waking up
OK, this device is also self-powered. But what about a thumb drive?
The same can be reproduced with USB thumb drives (all other USB devices were unplugged before, the Mini was sent to sleep via the power button):
Sep 16 18:16:29 MacMini2010 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
Sep 16 18:16:29 MacMini2010 kernel[0]: System Sleep
Sep 16 18:16:43 MacMini2010 kernel[0]: Wake reason = EHC1
Sep 16 18:16:43 MacMini2010 kernel[0]: System Wake
Sep 16 18:16:43 MacMini2010 kernel[0]: Previous Sleep Cause: 5
Sep 16 18:16:43 MacMini2010 kernel[0]: USB (EHCI):Port 1 on bus 0x24 connected or disconnected: portSC(0x301002)
Sep 16 18:16:43 MacMini2010 kernel[0]: The USB device Cruzer Crossfire (Port 1 of Hub at 0x24000000) may have caused a wake by being disconnected
So, either:
- OS X or the Firmware can not distinguish between connect and disconnect and wakes up the computer at both events. The log above shows the opposite in the last line.
or:
- This behaviour is by design. (But makes no sense for non-block-level devices. Unplugging = Wake-Up?)
or:
- Something with EFI ?
Now i am poking in the dark.
The Unibody-Mini is really a light-sleeper...

Is fox 35 and win. 8.1 and theAMD A8 compatable ?

Have loaded and uninstalled fox 35 several times----no error warnings---set fox for default-----but the result is a Franken browser part Explorer 11 and part Fox 35 and not usable . On the 1st uninstall Explorer 11 vanished but it's still there---when I reload Fox it's the same Franken browser and I found Exp. 11 when I tried ''new internet connection'' it seems 11 is already running but not showing any longer on desktop or in programs but it is intact and not a franken browser. Is there conflict with using Fox 35 and Win. 8.1 and the AMD A8 ??

Hello,
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

Itunes is not working on my mac. I'm trying to redeem a gift card and everytime I enter my password it does not work. Also, when I try and browse songs, everything is blank

HELP!
Itunes is not working on my mac. I'm trying to redeem a gift card and everytime I enter my password it does not work. Also, when I try and browse songs, everything is blank

It's been a while but it should work on a Mac because Macs can read Windows formatted devices. Otherwise, you can perform a restore operation to return it to the Mac format. If you go to support.apple.com/manuals/ you can find a copy of the user manual for the model you have in which this is all explained.

I'm in Camera Raw and for no reason my adjustment brush will not work. Any suggestions

I'm in Camera Raw and for no reason my adjustment brush will not work. Any suggestions

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Restoring my legally unblocked (and pricey) Apple-Store-purchased iPhone 4 did not work.

Restoring my legally unblocked (and pricey) Apple-Store-purchased iPhone 4 did not work.
iPhone does recognize my SIM card.
I would be grateful for help.
Many thanks!
iPhone4 GSM — Model A1349

Thanks for yor reply Lawrence.
RE:
Lawrence Finch wrote:
Take it to an Apple store for diagnosis. I assume you have a receipt that says you purchased an unlocked phone.
Valid, but sadly, this is immediately impossible.
CHALLENGE
I am Brazil and I need my phone to work here.
ASK
Isn't there a more immediate option?
VENTING:
It's painful ot have spend that cash for an unblocked iphone,
confirm in person at Apple Store that it would work in Brazil,
and then have it not.
What you think? Other ideas?

My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working.

My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.

Hello Kierasully,
I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/ts2570
Regards,
-Norm G.

My iphone 4's display is completely blackout and even its battery is not charging. I tried to restart my iPhone by pressing home and on/off button but it is also not worked. Now I'm in Nepal and here not even a single apple service center. What to do? Ple

Its been one month, my iphone 4's display is completely blackout and even its battery is not charging. I tried to restart my iPhone by pressing home and on/off button but it is also not worked. Now I'm in Nepal and here not even a single apple service center. What to do? Please help me.

You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

Satelllite A100-773 and WIN 7: Card Reader and Fn-Hotkeys not working

Similar Messages

Maybe you are looking for