Sattelite L300D won't start on battery, needs adapter to start

Hi!
I've have my Sattelite L300D since April last year, and suddenly my laptop won't start when the net adapter is not connected. Battery says 100% (Fully loaded) when I'm connected, and started the system.
Anyone any idea why my laptop's not starting on battery alone?
I already updated the BIOS to version 1.50 but that does not change a thing!
(My warranty is till April, so should I send it in for repair?)
Thanks a lot in advance!

Hi!
In your case I would go to a local ASP (authorized service provider) and let check your laptop from these technicians.
I think its a hardware problem, maybe the battery is faulty and so you can only start the laptop with AC/DC adapter.
Bye

Similar Messages

  • HT1414 My iPad Air, 32 gb will not start up. It had 97% battery charge, last time I used it. I tried connecting to my iMac but iTunes said I needed to add my password to my iPad Air, which I can't do since the iPad Air won't start up. The iPad air is one

    My iPad Air, 32 gb will not start up. It had 97% battery charge,last time I used it. I tried connecting to my iMac but iTunes said I needed to add my password to my iPad Air, which I can't do since the iPad. Air won't start up. The iPad air is one week old. Bummer, eh?

    Auld Dave wrote:
    . I tried connecting to my iMac but iTunes said I needed to add my password to my iPad Air, which I can't do since the iPad. Air won't start up.
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Hi, I need help. My iPad 2 won't start even if I already went through pressing the home and start buttons simultaneously. I also tried charging the battery for more than 30 minutes. Still won't power on. what should I do?

    My iPad 2 won't start even if I already went through pressing the home and start buttons simultaneously. I also tried charging the batteries for more than 30 minutes (done this procedure twice) but it won't still power on. What should I do next? Could it be a hardware issue then?

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • PB won't start, has no power, won't charge BUT I NEED THE INFO desperately

    Hello!  As the subject states, it won't start, has NoOoOoOo power, cannot get it to charge (and it's been plugged in now for 2.5 days).  While RIM CS said they might fix it, I need to get the information off the tab first as it's REALLY really REALLY important.
    I did post in another thread, but it seems my issue is just a little more challenging that most, as I've tried ALL the "ideas" that I have come across - here and in other site forums.  If only it were as easy as the pins being bent or getting another charger.....
    So not only will mine NOT start up, and is COMPLETELY dead, but (and here's the fun part) the USB port has been busted since purchase.  (Thought we'd manage without, but hah....)
    - the battery was NOT fully depleted when it crashed as it does every second day (this was Friday)
    - have a Rapid Charger, and have been using it all along
    - it has been plugged in for DAYS and nothing IS happening; no lights whatsoever
    NO light red, yellow, green, or otherwise that comes on when plugged in (or otherwise)
    - Looks like this "stacking" that keeps coming up refers only to when plugged into computers, which I cannot do,
    though I did try the 2 min interval anyhow for awhile
    - I DID hold down the power button for 10, 20, 30 seconds per notes on these boards
    - I DID hold down the power button for 2 whole minutes even per some suggestion
    - I DID try the power button with Volume + then with both volumes and power all at once
    - In fact, if anyone anywhere wrote to jump up on one foot, I tried that too!
    AND the reason it matters . . . there are photos or someone who has passed away on there that I need to get off before sending for repair (or better yet replacement if there are any left anywhere) and really need to get this thing started again.  Been a long time that I've been trying to get these images off, though I think that's another discussion for when it gets started hm...)
    Anything, oh wise BB PB peeps??
    Thanks in advance!!

    chaosdivine thanks for the idea!
    Had to laugh at the comment that the USB would be wobbly after some time had gone by.  Mine was broken after first attempt to even use it!
    Anyhow, good post, but did all that already.  Plugged in and sit, plug and unplug, plug and try to turn it on, leave it off, etc. and then some etc.

  • Nokia Lumia 800, Depleted battery Won't start up.

    Hi,  After being away for home for 5 days with no charger for my Nokia lumia 800, I foolishly allowed it to run out of battery, Unaware of the problems this can cause due faulty hardware, thanks to Nokia I returned home and plugged the phone into charge. I have allowed my Phone to run out of battery many times before in the past as you wouldn't expect any problem to come of it. After many hours of the phone being on charge I went to turn it on, it vibrated and came up with the phone providers image then no further, it stayed on this image for hours until I held down the power button and  it would turn itself off. Not being to worried at this point I went online to the many chatrooms, helpline, youtube videos you name it to source a solution. Having tried absolutely everything, about 10 times nothing has worked to multiple button combinations, heating the phone up, plugging into PC with zune - everything. Now slightly worried as I really do want this phone to work and not have to buy a new one at a great cost.  This is not a problem I have cause, it's a problem with Nokia, and the manufacturing of the phone, So if no one on  here will be able to aid me in fixing the phone, once I return to the UK I shall take it into a Nokia store to get it looked at, which i won't be happy to do as many of the Nokia outlets are in unconventional locations such as Glasgow.
    Thank in advance for any Help which is much appreciated,
    Lambtj
    Solved!
    Go to Solution.

    You are posting to a user to user support forum here and not contact ing Nokia Care. If the 800 will not start anymore and you have done all you say you have done it's likely the battery needs to be replaced. 
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Running an old MacBook Pro 2.5ghz core 2 Duo. Battery went chemical meltdown and expanded out of its housing. Removed it and was running off the power cord. This worked for a while. Now it won't start up. Have a Replacement on order. Is there a bigge

    Running an old MacBook Pro 2.5ghz core 2 Duo. Battery went chemical meltdown and expanded out of its housing. Removed it and was running off the power cord. This worked for a while. Now it won't start up. Have a Replacement on order. Is there a bigger issue or does a battery need to be in the compartment to boot up? Appreciate any help. Thanks.

    Working battery needs to be in for the computer to function.

  • MacBook won't start on battery/shuts down when power adapter is removed

    Help & advice needed please.
    My MacBook won't start without external power, it gives a whir then a click then nothing. Once started up, if I remove the external power it just shuts off.
    The battery shows at 98% & charging. Coconut Battery shows the following:
    Current battery charge 4126 (& increasing as I type)
    Maximum battery charge 4200
    Current battery capacity 4200
    Original battery capacity 5200
    80%
    Battery loadcycles 111
    Age of your Mac 6 months
    Charger connected yes
    Battery is charging yes
    Does anyone have a clue why the Mac won't power itself on the battery when everything else seems like it works?
    Cheers!

    As of today, my MacBook and I have been together for 40 days. Yesterday, while I was happily surfing (on battery), it powered down with no warning. Okay, these things happen. I plugged it in, restarted, and all seemed to be fine. Battery was about 70%. I did other things on my other machines and when it was about 90%, unplugged it and everything was good. This morning after using it unplugged for 1.5 hours it did the same thing, but decided to only work with the power adapter, not on battery alone. When trying to boot without AC, it would try to spin the CD and then fall back into off. When on AC, if I pulled the adapter, it would last two seconds and go blank. I made an appt. with the Apple store (Fashion Show Mall, Las Vegas) for 3:20pm. I got there right at 3:20pm and the monitors showed I was 5th in line. Store was fairly packed, at least one patron at every display item. Monitors also said the next MacGenius appt. was "approx. 8:30pm." Glad I made an appt! I was served about 15 min. later, during which time the monitors had changed to "No more MacGenius appts. available today, please try tomorrow." However, one guy came by without an appt. and was told he would be put on standby and to come back in 30 min.
    Once I explained my issue with my MacBook battery, my Genius tried one of his batteries. "I just want to make sure it's your battery and not your motherboard." My machine worked fine, so he said "No problem, I'll have you out of here in 10 minutes." He got me a brand new battery, tested it, and put my old one in a box on the rear counter with four others. He pulled the serial number from the "About this Mac" area, didn't need my receipt for purchase date or anything. I had even printed this page: http://www.apple.com/support/macbook_macbookpro/batteryupdate/ to use as ammunition, but didn't need it. He did approve highly of my dashboard widget "iStat pro", available here: http://islayer.com/.
    So the battery issue is a very common problem, and one that Apple has tried to deal with as painlessly as possible for the consumer. My Genius did ask if the battery showed an "X" in the icon bar, and I said no. Just wouldn't run on battery. On the way out of the store, one of the 3 MacBooks, in fact the one closest to the door, had an "X" on the battery icon. When I unplugged the power, it shut down immediately! The moral of the story is to contact Apple immediately with problems and give them a chance to fix them. Hope this helps others.

  • Charger stays green, battery won't charge and MacBook won't start up

    My son just gave me his old MacBook.  While visiting him it worked fine, stayed charged up a long time.  When I got home & plugged in the charger and it stayed green, didn't turn amber. Read the user manual and checked the battery level which is 1 blinking light only.  It won't power up (I tried all the troubleshooting tips on pg 54) and the battery is not charging.  Does anyone think I just need a new battery or do you think I need a new power cord?
    So excited to have my first MacBook and now it won't start!  I'm an  unhappy camper :-(

    Battery Information:
      Charge Information:
      Charge remaining (mAh):          0
      Fully charged:          No
      Charging:          No
      Full charge capacity (mAh):          0
      Health Information:
      Cycle count:          0
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          0
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          60
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          30
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Wake On LAN:          No
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      Battery Power:
      System Sleep Timer (Minutes):          15
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          15
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          No
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          Yes
      ID:          0x0100
      Wattage (W):          60
      Revision:          0x0000
      Family:          0x0085
      Serial Number:          0x004e206d
      Charging:          No
    I recieved mine in christmas 2009.... know what's wrong???

  • X200S won't start using a battery

    X200s works fine when connected to AC but won't start using the battery.  The on button has no impact, no indicator lights , nothing.  I have tried it with two different batteries, in both cases the battery condition shows good and fully charged in Lenovo Power Manager - any ideas?

    The fuses are not considered replaceable. They are soldered to the motherboard and are not a job for a "radio shack" soldering iron. A quartz preheater and a temperature controlled rework station is the minimum equipment you would need. It requires a complete disassembly to determine whether the problem is a fuse or something else. I do not have an x200s motherboard to look at to be sure, but the charging fuse for the main battery is usually near the battery connector. I will add that the problem you describe more likely to be a power transistor than a fuse, unless there was some sort of event that happened at the time it stopped working.

  • If my MacBook won't start, is there a way to access my data without replacing the battery? Someone mentioned removing the hard drive?

    I'm assuming that my MacBook won't start because it's been spilled on... It's happened once before and when I brought it in, all that was needed was a battery replacement. I have a brand new MacBook Pro and all I really want is my pictures, videos, music & other documents from my old MacBook.. Is there a way of getting all of that without buying a new battery, and then using Mavericks to switch over everything? A friend suggested that I just get all of it from the hard drive, but I don't really know much about that. Help?

    If you can take the computer to somewhere or someone who has a known-good battery, and if the MacBook is dry, you could tell in quick order if a replacement battery would be worth it. Likely, you won't have been as fortunate more than once; electricity and water don't mix well, and short circuited or fried electronics result.
    {There used to be a way to access one Mac from another if you could get the bad one to boot into Target Disk mode, but Intel-based macs didn't always work; they both needed FireWire ports & correct cable. If In an enclosure, you may be able to use a migration assistant utility.}
    An authorized service tech with Apple certification in portable computers should be able to remove the internal hard disk drive, install it into an external enclosure, & test it, for a fee; once in an enclosure it may be accessed to see if the hard drive's data files on the drive, or at least sees them. Labor + parts?
    Once the hard disk drive is removed, your user files would still have whatever account password protection needed to access them, but there are ways to migrate data from drives into another computer; in some cases the information on this may be tilted toward using a device you don't have, such as a Time Machine. If the data had been backed up on a Time Machine, it may have been possible to get it from that device using a method available in a Support article and put directly into another Mac.
    If the computer has failed due to contact with moisture or a drink pouring over it, more than once, it may require more than a new battery to see if it'd work well enough to run and get data from its hard disk drive. You may pay quite a bit of money to have someone do anything at all.
    How long ago did the MacBook get wet again? If several weeks ago, it may be dry inside. But may be damaged and the main logic board short-circuited or toast. So, it may not work even with the MagSafe attached due to other damages beyond a new battery. That could be a waste of money to buy one.
    There are repair guides at http://ifixit.com which may help you determine if you can extract the HDD from the failed MacBook, but even then you'd have to install it into a suitable USB enclosure to gain access to data. Some drive enclosures already have a hard disk drive inside, so try and get one that would work with the MacBook's SATA hard disk drive, and with no HDD installed. One less thing to do.
    So I know only enough about it to be dangerous.
    And to troubleshoot the old MacBook may not
    be worth the cost, if logicboard now is toasted.
    Maybe someone else can say it direct w/ less words? LOL
    Good luck & happy computing!

  • IPad is full but says it needs charging and won't start

    After charging my iPad all night long from a wall plug in sleep mode, it says it needs charging when I unplug it and won't start. Even holding the two buttons doesn't do anything. I know it's charged because after leaving it unplugged for some time (can take from a quarter of an hour to a whole day) if i reset it, it miraculously decides to work, and when it does, the battery level is at 100%. This is a real pain.
    Anyone else has had the same issue? Any idea how to fix it?

    Work through the tips in http://support.apple.com/kb/YS3281 and see if that helps.  If not, a visit to an Apple store genius bar for testing by the techs would be in order.

  • Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

    Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

       Did you download the new iTunes update that was also released this afternoon? That might be the problem. The new iTunes update came out today as well as the new iOS 7 update and if you haven't downloaded the new iTunes update it may be a compatibility problem so if you didn't, first update to the new iTunes and try again.

  • Downloaded firefox 5.0.1 last night, worked fine, Turned computer on today, Mozilla Firefox, it won't start. Get error message, Error: Platform version '5.0' is not compatible with minVersion =5.0.1 maxVersion =5.0.1" What do I need to do to fix it?

    We downloaded firefox 5.0.1 last night, began working with it. It did fine. After about an hour, I turned off my computer. When I turned on my computer, I click on Mozilla Firefox and it won't start. I get this error message, " Error: Platform version '5.0' is not compatible with minVersion >=5.0.1 maxVersion <=5.0.1" from XUL Runner. What do I need to do to fix it?

    The updater wasn't able to update all the files and some were left as older versions.<br />
    Do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/Profile_backup

  • Lenovo G510 won't start when battery is on and it's fully charged

    Hi there. I have my Lenovo g510 i5 notebook for 10 months, and my battery is wrong. I haven't used it on battery too much, but when I used it, I empty all of it and then charged it when it's turned down. Couple of days ago, the battery was empty I put it to charge, the orange light appears that it's charging, and day after when I put the battery on the notebook won't start, but with the battery and adapter start normally and show that the battery is 100% (fully charged). Why I can't use it on battery? Please help me.

    Hi Kocevski_91,
    Welcome to Lenovo Community!
     As per the query we understood that you are facing issue with system not starting with battery in your G510 laptop.
    Please remove the battery and connect only adapter and check for the issue, also try to perform a power drain by removing all the external devices connected to the devices and shutdown the system, now remove battery and adapter, press and hold the power button for 30 seconds, connect battery and adapter and check for the issue.
    If still the issue persist, perform battery gauge reset, go to power manager select advance mode and select battery tab and click on battery maintenance under this option click perform under battery gauge option. Please perform and reply with results.
    Hope this helps. Do post back if issue persists!
    Best regards,     
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • After update, Itunes won't start, saying I need QT 7.3 but only have 7.2

    I just did their update download to Itunes 6 after they informed me it was available. But the QuickTime version for windows is 7.0.2. But my windows computer won't start Itunes saying I need 7.0.3. I've had itunes for close to two years and have never had a problem. Until now. Now I can't open Itunes, can't get support help, and it doesn't seem like I can even go back to Itunes 5 which worked great. Any suggestions? Thanks in advance.

    well you HAVE TO HAVE quicktime in order for iTunes to work sorry
    ok try these articles http://docs.info.apple.com/article.html?artnum=302538
    http://consumer.installshield.com/kb.asp?id=Q111019
    http://docs.info.apple.com/article.html?artnum=302775
    http://error1603.windowsreinstall.com/
    check and make sure you firewall and antivirus is turned off during installation because it will block it from downlaoding.

Maybe you are looking for

  • Can't connect to iTunes Store for in-app purchase from one apple ID to another?

    I downloaded an app on ID1. I tried to then sign out and sign in with a new ID2 to do an in-app purchase.  I got an error message saying that I couldn't connect to iTunes store. I read the message boards and found that you can't do this since the app

  • Point-in-polygon performance  -large polygon w many vertices

    Dear Everybody, I was experimenting with the performance of point-in-polygon queries for very different polygon layers. My experience was that queries can be extreme slow, if the polygons are large and have many vertices (e.g., the administrative bou

  • Web-services Error with 6.1sp3 that doesn't occur with sp2

    I have recently began testing of our application using the newly released weblogic server 6.1 sp3. I took our existing compiled ear file and generated web-services client.jar file from our last weblogic 6.1 sp2 compile, deployed it on the new install

  • Can't Connect to my WiFi after ios 6 update

    My iPhone 4 recognizes my wireless network, but it doesn't automatically connect to it anymore. Everytime I try to have it connect a screen pops up that says "Log In" at the top but is a link to the apple.com website that says "Page Not Found". Anyon

  • T42 & T43 Thinkpad Keyboards not working after taking from docking station

    I have a t42 and t43 thinkpads, both are having the same problem. The keyboards appeared to be disabled, I have uninstalled, reinstalled drivers etc. Reseated keyboards physically and they still wont work. The glide pads work. The only way I can get