Sattelite L505-S5988 cd drive is stuck

hi
my laptop sattelite L505-S5988 cd drive is stuck, the orange light is blinking but the drive is not comming out or read. I hav also opend it from the pin but later when i closed it it got stuck again...
what is wrong?

There is a third way to eject a CD. Go to My Computer/Right click the CD Drive/Click EJECT on the context menu.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Similar Messages

Window detected a hard disk Problem on my Satellite L505-S5988

Hi,
I have a Toshiba Satellite L505-S5988 with window 7 Home Premium 09 Service pack 1. It is 2+ years old and my hard drive is Toshiba MK3263GSX 287GB. Lately, I got a window warning message as “ Windows detected a hard disk Problem. Back up your files immediately to prevent information loss, and then contact the computer manufacturer to determine if you need to repair or place the disk….. The following hard disks are reporting failure: Disk Name: TOSHIBA MK3263GSX Volume: C:\ “.
Since then, I have imaged my laptop and run malware/spyware softwares, and it looks like my computer is clean. The laptop device manager said my hard drive is working properly. However the warning keeps pops up. I opened Administrative Event Viewer and found the below warning:
“Log Name: System, Source: Disk, Event ID: 52.
The driver has detected that device \Device\Harddisk0\DR0 has predicted that it will fail. Immediately back up your data and replace your hard disk drive. A failure may be imminent.”
EventData
\Device\Harddisk0\DR0
0E00030001000000000000003400048002000000000000000000000000112
D000000000000000000000000
Besides this warning, there are also other errors and warnings back to years ago, such as AFS failed to load, print service… Despite all these errors and warnings, my laptop seems to be running OK. I was not prevented from doing anything that I usually do.
Questions:
Is there a tool I can run to verify that my hard drive is truly bad?
Can any tool further identify where?
Can it be repaired? Reformat? Or I have to replace with a new one?
What options I have if I have to replace with a new one?
What is average cost of it?
Any help will be highly appreciated.

Satellite L505-S5988
Event ID: 52 - Source: Disk
..the warning keeps pops up.
That's good enough for me. I would replace the disk.
You can verify it with the free trial of HD Tune.
-Jerry

Windows Detected a hard disk problem Toshiba Satellite L505-S5988

It has been about 2 months since I had my new laptop and first I coudnt get the flash cards to work so I finally fixed that and now everytime I start windows an error message comes up and keeps coming up every 10 minutes saying:
Windows detected a hard disk problem
Back up your files immediately to prevent information loss, then contact computer manufacturer to determine if you need to repair or replace the disk.
-> Start the back u process
-> Ask me again later
Show details
Which disk is failing?
The following hard disk are reporting failure:
Disk Name: Toshiba MK3263GSX
Volume: C:\
Please tell me how I can fix this because I called Toshiba support and the guy couldnt even figure out the drivers name for flash card.
Toshiba Satellite L505-S5988
Thanks

your hard drive is failing. you need to do what it says. back up everything and then either call toshiba to have it replaced under warranty or buy a new one and change it yourself. this is where all of your info and files are saved so if it fails without you backing it up you lose everything.
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

No web cam since windows 8 l505-s5988

I hope this is the best subforum for this (wasnt sure if this one or windows 8 subforum or another one).
I recently bought a really good Satellite l505-s5988 & had to put Windows 8 on it. Everything has seemed to work great except apparently the built in web cam is not getting recognized. When I went to device manager it only shows under imaging devices is a usb cam. I cant seem to find any drivers or info about it for if you are using windows 8. Any help please???
Thank you very much for your time & assistance.
P.S. I know at least before installing windows 8, it did work. Not sure about if it ever has since windows 8

Hmmmm. Oh and the problem is that in Device Manager the built-in webcam doesn't show up at all in imaging devcices! All that shows is a usb cam driver. When I go to Camera like you normally would, it looks like its starting up (because has Camera Options, Change Camera, Timer, & Video icon buttons at bottom but it never loads a image or anything & then it says at top of page that There Is A Problem With The Camera.
This is the only thing we've had not work correctly so far on this with Windows 8 installed (which has been about a month & half of daily use. Other than this, this laptop runs EXCELLENT with 8 including when I go to PCpitstop & test it, it ranks in Everything in Top 40% at very lowest rating out of all the tests (most things rank much higher). We've been surprisingly impressed so far.

Scanning and Repairing drive C stuck at 100%. - toshiba satellite l70d-a

Hello and thanks in advance:
Laptop model: toshiba satellite l70d-a
Age: 3 months old
Problem: when loading laptop Scanning and Repairing drive C stuck at 100%. Nothing elso than removing the battery. Started suddenly. I have tried to see if there were hd problems but found nothing. Ideas?
Not sure what to do. Can anyone help?

Here i what I have found running glary utilities:
Volume label is TI80145100B.
Glary Utilities 4 is verifying files (stage 1 of 3)...
329216 file records processed.
File verification completed.
1778 large file records processed.
0 bad file records processed.
Glary Utilities 4 is verifying indexes (stage 2 of 3)...
Index entry sessionstore.js in index $I30 of file 59559 is incorrect.
Index entry SESSIO~1.JS in index $I30 of file 59559 is incorrect.
Index entry e6eccf9166454d22f9ad07abdb6da390.png in index $I30 of file 59927 is incorrect.
Index entry E6ECCF~1.PNG in index $I30 of file 59927 is incorrect.
Index entry fb70939c8ecbd4faff2338ee6c5d2529.png in index $I30 of file 59927 is incorrect.
Index entry FB7093~1.PNG in index $I30 of file 59927 is incorrect.
Index entry 44 in index $I30 of file 75218 is incorrect.
Index entry 34 in index $I30 of file 77338 is incorrect.
Index entry 8E in index $I30 of file 77338 is incorrect.
Index entry 55 in index $I30 of file 104698 is incorrect.
Index entry 02 in index $I30 of file 132634 is incorrect.
Index entry FA in index $I30 of file 140243 is incorrect.
426568 index entries processed.
Index verification completed.
Errors found. Glary Utilities 4 cannot continue in read-only mode.
CheckDisk found 1 disk errors as follows:
C:\

My iCloud drive is stuck in a continuous loop. How do I fix

My iCloud drive is stuck in a continus loop after ios 8 upgrade hoe do I fix. It has been this way snice yesterday

To resolve issue with iCloud Drive continuously upgrading:
Sign out of iCloud account
Choose keep on my phone
Sign back into iCloud account
Choose Merge
iCloud Drive should be off now
iCloud Drive is only compatible with iOS devices running iOS 8 and Macs running OS X Yosemite, which is not yet available.
As OS X Yosemite is still pre-release (and not yet available) upgrading to iCloud Drive will prevent you from syncing with Clear for Mac until both OS X Yosemite is released and you upgrade to OS X Yosemite,”. Please make sure you pay close attention to the iCloud Drive screen shown after you update to iOS 8.”
After updating to iOS 8, one of the steps in the setup process will ask whether you want to enable iCloud Drive, at which point you should select "Not now."

After ios 8.02 update iCloud Drive is stuck in a loop that reads "upgrading" with a spinning wheel spokes for the last 48 hours.

After ios 8.02 update iCloud Drive is stuck in a loop that reads "upgrading" with a spinning wheel spokes for the last 48 hours.

There's a solution posted here that may work for you: iCloud Drive won't stop upgrading.

JDBC Driver: Messages stuck in processing started at rwb

Hi,
I have ABAP Proxy (7.1 EHP1) -> JDBC (MS SQL Server) scenario.
I'm trying to do INSERT_UPDATE. The interfases works fine for the first 5 messages. If I check the DB I see rows inserted correctly, but the first five messages stucks in processing started, and the others JDBC messages stuck in Pending to be delivered The interfase is developed as asynchron, i'm not affraid in the response.
I tryed to do just an INSERT, send just one message, or change the isolation level. But the messages continues stucking in processing started status.
One of the lasts possibilities is transform the interface to sync or increase the max number of threads of queue "JDBC_http://sap.com/xi/XI/SystemRecv" via ConfigTool. But I can't stop the j2ee stack until next weekend.
The audit Log:
- The message was successfully received by the messaging system. Protocol: XI URL: http://sapdev:51000/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
- Using connection JDBC_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
- Message successfully put into the queue.
- The message was successfully retrieved from the receive queue.
- The message status was set to DLNG.
- Delivering to channel: CC_C0400_IM01_MES_INTEG
- JDBC Adapter Receiver processing started, required QoS ExactlyOnce
- JDBC Adapter Receiver Channel CC_C0400_IM01_MES_INTEG: processing started; party / service XXXXXXXXX_DES.
- INSERT INTO XXXXXXXXXX_TST (CodArticulo, Descripcion, EAN13, Vidautil, bolsasporestuche, estuchesporcaja, estuchesporpalet, gxu, UNISTK) VALUES (XXXXXX, XXXXXXXXX, , 270 , 1, 0 , 0.000 , 1000 , KG)
Maybe is a problem in DB side, but the experience tell me that is more inestable a SAP PI than MS SQL Server
Any Idea?
P.S. In the same PI is coexisting diferents JDBC interfaces that works fine. I have tried to use their channels but still stucking.
And this is not my first PI :P

Hi Xavier,
have a look at the documentation of this option:
db.autoCommit=NO|YES
Use this parameter to deactivate the logical unit of work required by the JDBC adapter to guarantee that the data in the database is consistent. This option is required for JDBC drivers that do not support transactions. To avoid data inconsistencies in the database when the logical unit of work is deactivated, ensure that multiple database transactions cannot access the database simultaneously.
The default value is NO.
Do not set this parameter to YES if the JDBC driver supports transactions, that is, if the system does not display a corresponding error message during normal operation.
Netweaver Documentation
I'm sure MS SQL Server JDBC Driver is able to support transactions. By default the whole message will be treated as one transaction against the database.
Regards
Sven

Copying to ex-hard drive has stuck

In trying to copy my hard drive to my western digital ex-hard drive, the copying has stuck in progress and the computer won't let me reboot as it says I must
stop first the action in progress. How do I stop it ? The ex-hard drive will not let me eject it either. What to do??

Hold down Option key and Right Click on Finder’s Dock icon, select Relaunch

My dvd drive is stuck, can´t update from 10.5.8 ,what to do?

Hi!
I cant get out an old dvd (it`s stuck in the drive) is there a way to update from 10.5.8 whitout a working dvd player ?
thanks /mac

Have you tried all manner of getting the old DVD out?
Check out the post below that may have a method you have not tried yet..
https://discussions.apple.com/thread/2509053?start=0&tstart=0

Solid State Drive = Gets stuck

Hello,
I recently bought Intel's 520 Series Solid State Drive. I swapped my hard drive with the SSD, booted on a Snow Leopard disk. Opened Disk Utility, formatted my drive (Mac OS Extended Journaled) and installed Snow Leopard. After I installed the applications I needed, I finally upgraded to OS X Lion. But now I can't browse the net, work on applications or do any other task without getting a beach ball every 2 - 3 minutes. My MacBook Pro gets stuck a lot for some reason. (I never had this issue with my older hard drive)
I have the latest version of OS X Lion, but no firmware update was available for my SSD. I have an early 2011 MacBook Pro.
Does anyone have any suggestions on how this can be fixed?
Thanks.

What model MBP do you have? Older systems don't handle SSDs as well as newer system. Especially systems that don't do the 6GB SATA interface, which is what the Intel 520 series is. Although they state the drive interface is baclwards compatible that does always mean it will work correctly on older systems that only do SATA 1 transfers, 1.5GB.
You could try a Clean Fresh install of Lion without first installing SL. That may or may not work.
Just boot to the recovery HD partition and erase the Macintosh HD partition then re-download and install Lion.

Drive tray stuck open...where does the paperclip (manual eject) go?

I've got the Sony drive which has stuck with the tray half out. I cannot remove the drive because the tray prevents any movement sideways. If I get any firmer with the tray or little metal door something will break... My only solution appears to be the manual eject but this is hidden by the door which is stuck in place by the tray. There must be a simple answer but I must admit I can't find it.

The Great Escape?
After these previous posts I really 'took to' the drive tray and I thought I would let any passers-by know what happened.
I did some more pushing and pulling. much harder than before and started paying more attention to what was going on in the drive and decided to bend the tray in a middle up, sides down way and pulled... two nasty cracks (noises) and a complete and undamaged tray was in my hand. I took the drive out, used a paperclip to reset the manual eject and gently pushed the tray back in. Two nasty cracks (noises) later and the tray runs in and out as it should. The whole mechanism does feel a little looser than before but I risked re-installing the drive and grabbed the top CD from the nearest pile 'The Great Escape".
I have already had delivered a Pioneer 112D which takes over as top drive. So now I have two working drives although the second I know I'll never really trust.
Moral of story: If you have the Sony in your Mac Pro and the tray stays out it can be removed without breaking it using carefully targetted brute force but at the cost of some worry any time a valuable disc goes in.

Hard drive c stuck at scanning and repairing 100% complete

My laptop had to start up because of a hard drive problem. During the restart, the laptop was apparently scanning and repairing itself, but it got stuck at 100%. So i force it to shut down. This happened many times, and eventually I decided to refresh the laptop. It was fine for a few months, then it happened again. What's wrong with the computer and what can I do/should I do?
Thank you in advance :)

Hi Watermelons,
As the last replyer told, the hdd might be defective...
You can test this with am external diag utility. Many harddisk manufacturer have utilities for free. The best is, you use a tool which can be done with a self booting medium like CD-ROM. So, no operatind system ore other software could have influence on your HDD.
But (!) be carfully and read all information about this tool you will use. Some test funktion can destroy your data! The best is, you take a tool *in your language*. So you will understand everything. *First of all you should backup your data!!!* Why? Although most tools do not wipe your data, a crash during the tests could make your HDD inaccessable. And so your data!
Hope I could help
kind regards
Stefan

Door on Super Drive is stuck

Hi everyone,
I'm growing increasingly frustrated because I am unable to eject a disk from my super drive on my Powermac G5. The problem isn't that I don't know the key combinations or the assigned buttons for ejecting a disk. The drive simply will not eject the disk when the correct buttons are pushed. I can hear the drive "wanting" to eject it but it won't. The door seems to be stuck. Is there a fix to this problem (such as an adjustment that I can make regarding the alignment of the drive within the bay) or something like that?
Or do I need to go out and purchase a new drive from Apple or somewhere else? Please advise!
Thanks everyone! I appreciate the help.

The Power Mac G5 manual has the following
*You are unable to eject a disc.*
A file on the disc may be in use. Quit applications that are open, then try again.
If that doesn’t work, choose Apple () > Restart and hold down either the mouse
button or the Media Eject key on your Apple Keyboard.
If that doesn’t work:
1 Shut down the computer.
2 Carefully press down the front panel covering the front of the drive tray and locate the
small hole below the drive tray.
3 Carefully insert the end of a large straightened paper clip into the hole.
4 Push firmly until the tray opens.
5 Pull out the tray, remove the disc, and push the tray to close it.

Drive bay stuck

My drive bay is stuck. I think there is a screw come loose and jamming it up. It will only protrude a cmetre or so then stops dead. The push button is making a scratching noise when pushed.
Any alternative ways to remove the bay/ I removed the keyboard but couldnt find the screw or another way to push it out.
This happened before and eventually it just came out after i fiddled with it but this time it just isnt going anywhere...
I need to remove the drive as i have a new ssd and it wont be as fast as i need it through usb 3 run in an external enclosure. I cant use my main C ssd for this work as i requires more spance than I have.
Help!! Thanks!
Solved!
Go to Solution.

w520
its ok i got my dad to fix it. needed to unscrew the main bottom part of the laptop to get a bit more clearance and it came out eventually.
thanks ayway,

Sattelite L505-S5988 cd drive is stuck

Similar Messages

Maybe you are looking for