Saturation Blend Mode Does Not Perform As Specified

This question was asked two days ago by another poster on the Photoshop Macintosh Forum. There were no responses, so I am re-asking the question here.
According to ALL authorities out there, the Saturation Blend Mode is supposed to produce a result having the saturation of the blend color. It does not consistently do so (and the inconsistencies are not limited to gray areas). Why?

Hi,
Thanks for the answers,
yes the two vlans are just switched on the catalyst, they enter into the routed process with the other layer-3 vlans.
The default gw of the servers is the csm (the alias ip). We are totally sure there is not an asymmetric routing, the vlan servers talk with other vlans only by being bridged by the CSM.
We tried a similar catch-all configuration in the past days, now we'll check your last configuration: our aim is not to lose "src port" infos when the ACK comes back from the server to the client. We saw that nat client/natpool work as a PAT.
The other problem we had with our original catch-all configuration (listed below) is that we can't have two of them for different vservers/serverfarms (VIP) on the same vlan. We'll check it and we'll let you know
Our "check-all"
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
natpool NAT_UDP 1.1.1.4 1.1.1.4 netmask 255.255.255.192
serverfarm EXT_UDP_NAT
no nat server
nat client NAT_UDP
predictor forward
vserver EXT_UDP_ALBBE
virtual 0.0.0.0 0.0.0.0 udp 0
serverfarm EXT_UDP_NAT
vlan 4
persistent rebalance
client 1.1.1.1 255.255.255.255
client 1.1.1.2 255.255.255.255
inservice
Andrea

Similar Messages

I have a mac which plays the boot sound but the screen stays black. Recovery mode does not work, as the keyboard is wireless. What do I do?

What it says in the title.
I have an older mac and it worked perfectly until about an hour ago when I shut it down because we needed the room dark for a presentation and the screen saver was putting out light.
Now it won't turn back on. It plays the start up music but the screen stays blank.
The CMD+OPT+R for recovery mode doesn't do anything, the keyboard is wireless so the command doesn't get to the computer and that's the only keyboard I have since that's the one it came with.
I'm looking at making a USB recovery disk but it says that I should click on "Options" in the Disk Utility but there is no options button or menu to click.
From here: OS X: About Recovery Disk Assistant in step 3 I get stuck.
Also it says that if I make a drive on this computer which has an older OS it might not work on the broken machine with Mavericks.
This machine literally worked and I turned it off and now it does not work and there seems to be nothing I can do... ***...

kodemage wrote:
well, then recovery mode does not work. I've tried all the key combinations I've seen on line. Command+R, Command+Option+R, Command+Option+P+R, none of these work.
I don't believe there is anything we can do on a forum to help then, you need to take it into a AASP and have it professionaly diagnosed. If you don't know how to locate an AASP in your area you can begin by using Contact Apple for support and service
Good luck.

HT2404 how do you get your money back for software that does not perform as advertised?

how do you get your money back for software that does not perform as advertised? I purchased the batch coverter to watch .swf video which it states it supports, but it will not open the files and I want my money back!!!!!

tell Apple. http://www.apple.com/feedback/
iTunes Store Terms and Conditions specifically states: All sales and rentals of products are final.

Datetime value does not match the specified format

Hi All,
I am writing this function for a template
case when "Employment Events (Current)"."Most Recent Hire Date" is NULL then NULL else CAST(TIMESTAMPDIFF(SQL_TSI_YEAR,cast(cast("Employment Events (Current)"."Most Recent Hire Date" as char)as timestamp),Cast(Cast(@{EndDate}{CAST('2011-01-01' AS DATE)} AS CHAR) AS TIMESTAMP)) AS CHAR)||' year(s) ' end
but when it runs, it throws me this error
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 46046] Datetime value 2011-01-01 does not match the specified format. (HY000)
What am I doing wrong? "Employment Events (Current)"."Most Recent Hire Date" is set to max - aggregation in the rpd.

I found the solution as well.
The ODBC driver on the Windows server was old (Version 6). I upgraded that to SQL Server Native Client 11.0 and everything works fine.

Videos have stopped playing on all sites, just get black screen. Clearing cache and cookies and restart in safe mode does not fix.

Clearing cache and cookies and restart in safe mode does not fix.

Hi castaway, you are using a old version of firefox . Please update it . goto '''Help->About Firefox''' and it will be automatically updated.

Process does not perform an update.

I have this PL/SQL process in my page:
UPDATE tag_order
SET order_date = SYSDATE
WHERE order_number = :P16_Order_Number;
COMMIT;
Unfortunately, it does not perform the update. What could be wrong?
FYI: In order to get to the page where this process is located, you first go to a page that contains an Interactive Report region (Page 15). When you click on one of the rows in that report region, page 16 is loaded and the :P16_Order_Number item is loaded with the order number from the report page. I'm not sure if that has anything to do with the problem, but I mention it because :P16_Order_Number is referenced in the update statement. Could it be that its session state is not set?
Any advice would be appreciated. Thanks.

Thanks for your responses. Your answer seems perfectly logical, unfortunately, it did not work.
I made a copy of P16_Order_Number and called it P16_Order_Number_Visible and made it a 'Display as Text'.
Then I changed P16_Order_Number to 'Hidden' The report was already set up to set P16_Order_Number to Order_Number, so nothing had to be changed there, or in the Process that referenced P16_Order_Number, since it is now referencing the Hidden item.
But when I ran it, loaded page 16 and clicked Session, P16_Order_Number had the correct value 172, but P16_Order_Number_Visible had no value, even though its Source has been set to P16_Order_Number and the value 172 was actually displayed from P16_Order_Number_Visible on page 16.
Furthermore, the update did not work. So what is wrong here?
Thanks.

CM Repository created in fsdb mode does not displaying in KM Content

Dear KMC friends
CM Repository created in fsdb mode does not displaying in KM Content.
Any extra confiugration i need to do?
plz reply me
kantha

https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/284
Message was edited by:
Hadar Morchi

Error the entered value does not match the specified field type

Hi,
When I try to insert a null value to a field of the User Defined Table I am getting the error "The entered value does not match the specified field type" in SAP Business One version 2007 PL 42.
Any help would be appreciated.
Thanks in advance.
Sudha.

Hi Sudha,
It probably have to do with how you defined the field.
Is Null value allowed?
What are the field definitions?
Thanks,
Jesper

Digital ICE epson scan (professional mode) does not work

Hello,
I am running the latest Mountian Lion OS on my IMAC and have recently started running some test scans with my Epson Perfection V700 scanner. The supplied Epson software , Epson Scan offers a variety of operating modes, "professional mode" offering the most features. Professional mode offers Digital ICE as an option, however when selected, the Digital ICE does not work.I have compared scans with and without digital ICE and they are exactly the same. Scratches and dirt are not removed by the scan.
If I select a more basic mode ("Home Mode") Digital ICE does work. But this other mode does not offer the range of options offered in porfessional mode.
Has anyone out there used Epson Scan software? Has anyone else experienced this problem? Is there other scanning software out there which could fully exploit the features of the Epson scanner I have? I tried Vuescn and it does not seem to be compatible with my scanner, so that is off the table.
Dean

You should first read the user manual that came w/your scanner and/or contact Epson tech support.
How is the scanner connected to your iMac? USB cable? Wireless? Firewire?
Has anyone out there used Epson Scan software?
I have an Epson scanner. It only work when it's connected directly to my iMac via USB cable.
Has anyone else experienced this problem?
Initially.
Is there other scanning software out there which could fully exploit the features of the Epson scanner I have?
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print/scan
Sometimes, installing the GIMP drivers help with printing/scanning issues: http://gimp-print.sourceforge.net/MacOSX.php

HELP: InDesign CC 2014 simply does not perform the action pack

HELP: InDesign CC 2014 simply does not perform the action pack. Why?

Exactly! I meant the Package command. Someone else it happen the same?
Sorry for my english, friends.

ORB does not perform clean up after destroy() is called.

hi,
the HelloClient example (POA model) which is provided in the Java IDL tutorials, does not perform clean up after the execution is complete.
i.e. i can still find the Socket descriptors in the file system under the path (/proc/p_id/fd). Do we need to explicitly destroy the sockets inorder to perform the required clean up??the OS i'm using is Linux.
if yes, then how do i do that.... the following are the steps to reproduce the problem:
1)start HelloServer
2)start HelloClient
3)check file count in /proc/process_id/fd before calling init.
4)invoke ORB.destroy() method.
5)check file count in /proc/process-id/fd after destroy completes.I have included Thread.sleep(25000) inorder to check the file count dynamically at each stage of execution.
Any help in this regard is welcome....!!
thanks in advance

Hello:
This reply may be long after the time that you need it ... but the problem
that you are experiencing sounds very much like a bug that was fixed in the J2SE 1.5.0_10 release.
It is bug 6354718 ....
In the evaluation section of that bug they note:
Yes. It's a known bug in ORB connection management. What's happening here is, the connectionCache that maintains both inbound and outbound connections does not reclaim connections, upon ORB destroy() call. There is a connection reclaim() logic in place, but does not kick in, until it reaches certain watermark levels. Since, a single client can have a multiple ORBs and thereby multiple outbound connections (in the reported case) , with each cache having exactly one connection which leaks up on ORB exit. This leak multiplies based on the number of ORBs and time period over which client stays live, up and running.
The solution is, to walk through the connection cache and close each connection,
no matter what the watermark levels are. This can be done at the corba transport manager close() call.
Note: In the above evaluation they tell you how to fix it yourself but I believe (I haven't tested it yet ....) that if you upgrade to JDK 1.5.0_10, you should find that it has been fixed for you.
I hope that I'm not steering you wrong, but that's my take on your situation.
John

[nQSError: 46046] Datetime value -09-05 does not match the specified format. (HY000)

Hi,
I am getting the following error while selecting the date column from Report. Please suggest the solution or work around.
SET VARIABLE QUERY_SRC_CD='Report';SELECT
   0 s_0,
   "PPMC SA"."Dim Workplan"."Project Id" s_1,
   "PPMC SA"."Dim Workplan"."Project Name" s_2,
   "PPMC SA"."Dim Workplan"."Task Actual Start Date" s_3
FROM "PPMC SA"
ORDER BY 1, 2 ASC NULLS LAST, 3 ASC NULLS LAST, 4 ASC NULLS LAST
FETCH FIRST 65001 ROWS ONLY
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS.
[nQSError: 46046] Datetime value -09-05 does not match the specified format. (HY000)
My Observations: Task Actual Start Date is a date column in SQL Server 2008, the column imported in obiee Physcial layer as Varchar(10). So i converted the column as Date in Physical layer.
Thanks in Advance,
Pradeep

Hi Pradeep,
    One or more rows in 'Task Actual Start Date' does not have date time format which is why you will be getting this error. You may have to fix this at data level to get rid off this error.
To test, apply a filter to see 5-10 rows of data, it should work fine as you would have excluded that data.
Pls mark if correct/helpful.

The installed file can not be activated. Since the system does not perform the registration. What can I do?

The installed file can not be activated.
Since the system does not perform the registration.
What can I do?

I have the same issue. When trying to open the acrobat XI Pro for the first time, you are obligated to sign in with your account. But signing in is taking about an hakf hour now, while I have no problems signin in trough adobe.com with the same username and password.

I have upgraded to latest IOS 7 software and the vibration on silent mode does not last long enough

I have upgraded to latest IOS 7 software and the vibration on silent mode does not last long enough

I think you're using a Lion developer version. Open  > About this Mac > More Info, and copy Software here. Did you purchase Lion in the App Store?

I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?

I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?

Other suggestions, and more info about the nature of the problem, may be in this Apple tech note.
http://support.apple.com/kb/HT1365
For example, you might find that the brick wall is not the only problem. There may be other devices pumping out enough wireless interference to be making things even worse.
I agree with Bob Timmons that Ethernet is best and most reliable. And that powerline (which I use) is easier and potentially faster than wireless...but only if your power lines do not have electrical devices plugged in which produce electrical noise on the line. Powerline will be slower than Gigabit Ethernet.
Ethernet cable is the only way to ensure that the signal goes directly there in a shielded way for a clear fast signal. Wireless and powerline are much slower because of all the other things the signal has to fight past to get to the other device.

Saturation Blend Mode Does Not Perform As Specified

Similar Messages

Maybe you are looking for