Save a file in the right format to uplaod to dreamweaver?

After I finish photoshopping a picture how and in what format do I save it in in order to uplaod it to dreamweaver with the changed made? Please copy/paste the steps for me.
Thx,
Gabe

Try the forums for photoshop or dreamweaver.

Similar Messages

QuickTime Player 10.1 no more includes the ability to save a movie file in the same format as the original movie after editing it? No, it doesn't!

Since upgraded to Lion, I have to wait for QuickTime Player 10.1 to "CONVERT" every file that I edited in it.
Yes, it might save some disk space for me.(Which is not always the case though.) But it also takes almost 10 times or more as it did when back on Snow Leopard with QuickTime Player 10.0 there I could save any file in the same format as the original movie WITH NO NEED TO CONVERT IT.
Now I have to wait like 10 minutes to delete just a few frames.(The time it takes depends upon the original size of that movie. The larger the longer.) And guess what? If you have two clips originally split up from a movie and sperately getting saved(converted actually) with a loooooooot of time, and you naively added one of them to the other's end and then saved the finished one. It converts AGAIN! Doing so back on Snow Leopard with QuickTime Player 10.0 only takes you even a few seconds only!
Seriously, are we eating Apple or dirt this time?

My existing movies are all the following types straight from FinalCut
Apple Intermediate Codec, 1920 × 1080, Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
This particular movie is 6.66 Gb
The new Quicktime player in OS Mavericks converts these to the following format:
Apple ProRes 422, 1920 x 1080
Linear PCM, 16 bit little-endian signed integer, 2 channels, 48000 Hz
And a movie size of 6.48 Gb
It seems obvious from other forum posts this is a planned move so that everything is the "new mobile device" ready state/format. To use Marc Speth's post as material....
https://discussions.apple.com/message/23749558#23749558
this is probably about dumbing down desk top OS to that pf iPhones and iPads. This is not what I paid good money to own a Mac Book Pro for....
Today I rolled all the back to Snow Leopard. Really good move...... All those new features hey? I lost the ability to work in spaces and of course the whole Quicktime debacle.
The rolling back process was easy, restored from a point prior to installing Lion and Mavericks and the only issue was my iPhoto libraries. Thank my stars that I still had back ups that I had not converted yet.... viva la Mavericks...NOT. Apple can keep it.
Unsure if you are just venting or if there is supposed to be a question here. Basically, I assumed this to be Apple's idea of an improvement. That is, I really believe the ProRes 422 codec is a better intermediate codec than the AIC codec but most of my old HDV camcorder family tapes were imported by iMovie (for compatibility with my wife's non-FCP computer configuration) and, like your content, is/remains stored as AIC/PCM MOV files. At first I thought this might be a generalized change affecting all QT X based apps but when I went to check the latest iMovie v10.0 update, became confused when I noted that AIC source files were not automatically updated to ProRes 422 and continue to play natively in the iMovie source media viewer.
I guess this is supposed to be a logical evoluption and we were supposed to have seen the "handwriting on the wall" dating back to when Apple's first released the free ProRess "player" ProRes 422 codec. Still, it would have been nice if Apple had given some warning during the last few years so users could plan and prepare for such a drastic change. For the moment, I am just thankful that AIC remains, at least temporarily, supported nativelyby the iMovie video editor under Mavericks. Thank goodness for small favors.

How can I save a file in the server?

Hello,
I am writing a Java Web Start program that it will generate a html file, how can I save the generated file in the server, fro example, the directory where I stored my JAR files. Because right now, it will create the html file in the local client mahcine instead of the server. Can anyone tell me how can I do this? Thanks you.

Yeah, thanks but that's not what I was trying to ask.
I know that you can save and open a document by performing these three steps:
1. Confirming to save a file to the Downloads folder
2. Open the download manager by clicking the temporarily green arrow
3. Clicking on the downloaded file
What I would like to know is whether or not it is possible to have Firefox open a saved file ''automatically''. At the moment, if I choose to open it automatically, it is only saved to my temp folder.
It would be great though if it was saved to my Downloads folder ''and'' opened with the respective program on my pc. Is there a way to do this?

How can I save a file in the Downloads folder and automatically have it opened?

Often, I'd like to download a file, save it to my Downlaods folder and have it opened right away.
Currently, you can only decide between the two options "open" or "save to...". There's seemlingly no way Firefox can do both at once.
I know I can download it, open the downloads manager and open it manually. But when working with over a dozen documents a day, that doesn't quite do the trick.
In Chrome, you only have to click twice: Once for downloading and once for opening it from the download bar on the bottom of the screen. You do not have to open a download manager.

Yeah, thanks but that's not what I was trying to ask.
I know that you can save and open a document by performing these three steps:
1. Confirming to save a file to the Downloads folder
2. Open the download manager by clicking the temporarily green arrow
3. Clicking on the downloaded file
What I would like to know is whether or not it is possible to have Firefox open a saved file ''automatically''. At the moment, if I choose to open it automatically, it is only saved to my temp folder.
It would be great though if it was saved to my Downloads folder ''and'' opened with the respective program on my pc. Is there a way to do this?

How can I save my vis in the old format

I'm using Labview 9, but would like the be able to save my files in the old 8.5 format so if I need to open them on a machine that only has 8.5 that I can open them. Is there a way to do this?

http://forums.ni.com/ni/board/message?board.id=170&message.id=447806&query.id=250273#M447806
J-M
Jean-Marc
LV2009 and LV2013
Free PDF Report with iTextSharp

Creating a flat file in the IDOC format

Hi everybody,
Need help.....urgently. Can somebody please tell me how to create a flat file in the IDOC format? I am creating a bill of lading/Documentary payments (EDI 858) and can't figure out a way to write the data generate through the report in a flat file in IDOC format. My deadline is right around the corner and I need help.
Thanks,
M

Hi Minal,
I still don't understand your question.
So, you have a report which selects data and puts it into an internal table. This part looks fine.
You want to create a flat file? Ok, to create a flat file on the application server then use the commands OPEN DATASET, TRANSFER, and CLOSE DATASET. To create a flat file on the presentation server then use the FM GUI_DOWNLOAD (or the GUI class, I forgets its name for the moment).
In both cases you should build up an internal table which has the exact structure required for your (EDIFACT?) EDI message, and then use the appropriate method to write the file.
If the following steps are manual then there is nothing more for you to do.
I don't see any need to use Idoc technology, or make any reference to it in your solution.
I hope that helps. If not, please be more specific when asking your questions.
Brad

Cannot open file in the "GenRandom290" format

Just updated yosemite and when I go to open a file i get the message cannot open file in the "GenRandom290" format. Before i updated never had a problem.

Hi,
In the current format of the Apple Discussions you can "tag" a Thread starting post with the sub folders such as the "Mail" section or "Messages" and other App based section or ones like "Using Yosemite" to pin down the knowledge you need.
The experienced posters can add the word Content at the base level of the Forum folder like this
"https://discussions.apple.com/community/mac_os/os_x_yosemite/content"
This changes the View but you can then select a specific section.
I use Messages which converts to:-
OS X Yosemite
So in looking for posts about the Messages app I found this Thread tagged for Messages.
The issue is not one I recognise from Messages.
If you Right Click the File and use the Open With option what do you see ?
This might tell us what area we should be looking at.
Example of Screen Shot on my Desktop
8:37 pm Tuesday; February 3, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I have no share tab to share videos and get them in the right format for posting on youtube, is this because i have got the trial version, someone please help.

I cant export my movie, as there is no share tab and when i go file>share it isn't in the right format what should i do?

The trial version of FCP X is the same as the paid version - it just stops working after 30 days, so that's not your problem.
What version of FCP X is it, and what is the spec of the footage you're editing?
(Open it in QuickTime and press Cmd+I to show the spec in the Inspector, then post back with the full details or a screen grab).
Andy

Boot Camp Assistant does not allow partiton when my disk is the right format

Boot Camp Assistant does not allow partiton when my disk is the right format - (Mac OS Extended (Journaled) volume).
When I go to the Boot Camp Assistant to partition the Macintosh HD disk, an error comes up saying,
"The disk cannot be partitioned because some files cannot be moved
Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
Please help me out! I would really appreciate it!

I was not allowed the Repair Disk option. I tryed Verify Disk, and an error came up saying,
"The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk."
What should I do?

I own an iPod Classic. In iTunes, some podcast videos cant be played on teh iPod, so I set it to convert the video to the right format for the iPod. It used to work perfectly, but now for some reason, it doesnt convert properly! When I play the video,

I own an iPod Classic. In iTunes, some podcast videos cant be played on teh iPod, so I set it to convert the video to the right format for the iPod. It used to work perfectly, but now for some reason, it doesnt convert properly! When I play the video, it is just a white screen, but the sound can be heard. Can anyone help??????

Your source video file is probably muxed.
Neither QT Pro or iTunes has the ability to successfully encode a muxed video file with audio. You'll end up with video and no audio.
See: iPod plays video but not audio of some exported files.
You'll need to use some other third-party software to do the conversion. There's a handful of software available. Just search the forums and you'll find many titles mentioned.
Try MPEG Streamclip.

I recently updated my macbook, i don't know if that has any effect to my recent problem, but when i try to download and save .mp3 files from the internet, like i have done in the past, it downloads but not as an mp3 file, its "blank"

i recently updated my macbook, i don't know if that has any effect to my recent problem, but when i try to download and save .mp3 files from the internet, like i have done in the past, it downloads but not as an mp3 file, its "blank" and when i try to open it, i can't? I NEED HELP !

Here is the download page

I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?

I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?
Thank you

So it seems from reading the COMMAND manual that my first issue is that I used a 16GB SD card, and the manual says it will only recogize up to a 2GB SD card. I did use my MB Air's SD card slot and crated a folder and dragged the music files to it, then to the card. So I am going to get a 2GB card and try that next. Otherwise just stick with the iPOD connected. At least that is 8GB

Finder cannot open files in the "volume" format.

I had to downgrade from the second Yosemite beta in order to run one of my applications for work that didn't run on Yosemite. I've successful reinstalled Mavericks to the chagrin of finder not working at all. Whenever I mount a DMG I get "Finder cannot open files in the “volume” format." Also, whenever I click to open a folder or a new window in finder, it just crashes and relaunches. I'm going to try to do a fresh install of Mavericks and recover from a backup. Let me know if you guys have faced this same issue and found a solution.
I also had to regain admin privileges for my user which I have done successfully.

I fixed my problem by installing Mavericks again. No need to fully restore.

I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet. I get a dialogue box saying the QuickTime plugin has failed. I have tried to download the latest plugin but this doesn't work. Can anyone help?

I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?

Is this what you downloaded: iTunes 10.7?
When the update fails what if any error report do you get, specifically? Please do this before trying again:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Infopath submit - how to hide - Save as dialog box - You can only save this file to the current site

HI,
I have a infopath form. In the submit options, i have used the below:
submit options -
sharepoint document library
Data connection - Sharepoint Library Submit
Doc library - lib location
File name: concat("User Info - ", ResourceName, "-", PersonalID)
Allow overwrite if file exists is checked.
When I try to save a record, I am getting a popup:
Save As:
You can only save this file to the current site
File Name: textbox
save location: doc lib.
save, cancel buttons.
How to override this save as option(save as option should not be shown to user), and save the file using the file name mentioned?
Thanks

Are you clicking "Save" when you're using the form or "Submit"??
You should be using "Submit" and it will ... submit your form to the document library with the file name you specified.
To disable the "Save" button, click on "File" then "Form Options". Under the "Filler Features" area you can uncheck the box beside "Save and Save As". Click OK then re-publish your form.

Save a file in the right format to uplaod to dreamweaver?

Similar Messages

Maybe you are looking for