Save a movie and play at the same time

HI. Am having a problem to save a movie(both video and audio) to a temporary file and playing from that temporary file at the same time.
Infact the movie in coming from a server. Am using AVReceive2 to receive the movie. The temporary file will be growing while am playing it.
Can anyone help me? PLZ.

Hi all,
I have a problem,
I have managed to create a player and a processor that plays and records live video and audio(i have merged the datasources at the sender).
when i create a clone for sinking the video, i donot get track[1] (audio) control of the processor.
i think the problem is with cloning. when i gave the player the clonable interface instead of the original DS, it also did not give any audio.
thanks ahead for your help

Similar Messages

  • IPod Touch 4g won't charge and play at the same time

    I used to have a 4g Nano that I would play in my car through an aux cable and charge through a cigarette lighter charger. I just got a 4th gen iPod Touch and it no longer lets me charge and play at the same time. If both wires are connected it will only charge and not play, once I pull the charger part out it will play through the speakers. Is there a fix to this? Do I need a different charger so that it won't think it's simply docked?

    You would need to turn off hard drive mode via iTunes iPod settings on your home system to do this. I don't know if you have this mode on or off already. I thought I read that there is a way to enable/disable hard drive mode via the iPod buttons but I don't remember how.
    Thanks,
    Steven

  • Two clips overlayed and playing at the same time..

    Hello!
    Is there anyway to play two clips at the same time?
    The same way cross-disolve layers the images??
    a thousand thanks!!

    Hi (again)
    I figured it out.. So if anyone is interested, all you have to do is go to Modify and then change the composite mode to Overlay. Then it has to be rendered. Piece of cake!!
    Thanks!

  • Cannot download content and play at the same time

    Hello Again,I am not sure if this is thanks to the last update but during this week I have not been able to download a game and play others game at the same time.I leaved the game downloading then went to play something (online or campaign) and a couple of minutes later the game that I was downloading appear with an error cannot download, error connection etc.I checked my network and is fine, even purchased a new router with the same results.Is somebody else experiencing this problems or know a solution for this?

    Hello Apparently the problem was the game I was downloading i downloaded 2 games today an no error

  • HT1222 The music in my iTunes library run together and play at the same time.

    The music in my iTunes library run together andplay at the same time.

    The "bar" at the bottom does not say anything about all of your songs being on the iPod.  It just shows you how much of its storage capacity is being used, based on what is on the iPod.
    If you see "On This iPod," that means the iTunes sidebar (along left side of window) is not visible.  This is easier to describe with the sidebar visible, so from the iTunes menu bar, under View, select Show Sidebar. 
    Select the iPod in the sidebar, under DEVICES.  There is a bar of buttons near the top, starting with Summary.  Click on Music next to Summary.  This is the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
    Check the box for Sync Music.  You can choose to sync Entire music library, if (?) your iTunes music library fits on the iPod.  With this setting, your entire iTunes music library syncs to the iPod, and new songs get synced automatically.  A 7th gen iPod nano is 16GB, so your iTunes music library would have to be less than 16GB (not counting non-music content on the iPod).  Otherwise, you can choose to sync Selected playlists, artists, albums, and genres.  Then, select (checkmark) the playlists, artists, albums, and/or genres you want on the iPod from the lists below.  If you want newly added songs to sync to the iPod, they must be part of your selection.  For example, you can add them to a playlist that you have selected for syncing to the iPod.
    When you click Apply, the songs from your selection sync to the iPod.  Going forward, changes to your iTunes library (based on your settings on the iPod's Music screen) sync automatically to the iPod, the next time it is connected (or when you click Sync).

  • Can I automatically save a file and backup at the same time?

    My financial files are held in the cloud which means time machine does not back them up. Is there a way I can automatically backup the files whenever I save them?

    Anyone? Even if only to say it can't be done.

  • Multiclips and multiple audio tracks playing at the same time

    I've only just taken delivery of my first ever mac (only ever used PC) with FCP, and I'm loving it already! Done lots of reading and viewing of video etc etc, and it's not as daunting as I thought it might be. I have one question the books don't seem to answer, and I can only find one reference to this on this site, with no definitive response. FCP5 probably doesn't work this way, but just in case someone knows different......
    I film and edit motorsport (karting) programmes for television in the UK, using multiple cameras. I usually lay all the video and audio tracks on the timeline, (synched) lock the audio for each (as it is engine noise, and I want it playing without abrupt changes at cuts as each kart passes each camera, whether in shot or not) then cut the video tracks and delete those video segments not required.
    The most exciting aspect of FCP5 for me is the multiclip editing facility, which I have found very easy to learn and is going to save me hours of work! However, I want to know if there is a way of having each audio track from each camera used in the multiclip laid down on the timeline when you import the multiclip to the timeline from the viewer, in order that I can play each audio track from each of the cameras at the same time.
    I know how to cut from angle to angle, leaving the audio from the selected angle as the one audio track playing, but I want all of the tracks to appear in the timeline and play at the same time. I know there's a bit of a workaround by locking the video and importing each audio track from each clip independently, but if you do have to re-synch one of the multiclips, this means the audio is not then synched with the original clip, which will have had an in point set before being imported in as part of a multiclip.
    I can understand why you might want to keep audio from one camera only playing over the whole multiclip, or to switch between audio from each, but in my case I prefer all audio to play at the same time. The workaround is still do-able for me as I'm only talking about engine notes, which if they are a few frames out is not very noticeable at all, but I would like to know if I'm right in thinking I cannot do it the way I would like to?
    Wish I'd used FCP from the start, but glad I've got it now.....especially with the 30 inch screen! It's 4.40am, been going over 19 hours straight and I'm still making comments like...."WOW, that's brilliant"...every half hour!
    G5   Mac OS X (10.4.3)   Quad, 8gb ram, 2 x G-Media GRaid 500gb Raids, 30 + 20 inch Cinema screens

    ...

  • Hi there, Will be possible listen and charge at the same time my iPod shuffle in my car?

    Hi there, Will be possible listen and charge at the same time my iPod shuffle in my car? I have got a jack going to my sound system the issue i would like to solve is charging at the same time

    Since the shuffle (except for the 1st gen shuffle) uses the same "port" (the headphones jack) for sound output and charging, there is no way to do both concurrently.
    NOTE:  You can charge and play at the same time on the old white 1st gen shuffle that looks like a USB flash drive.

  • Reading and recording at the same time with AudioUnit

    Hi,
    I am trying to read and record at the same time on the iPhone with AudioUnit. For the reading part I made an AUGraph which works fine, constructed like that:
    NewAUGraph(&_graph);
    _outputUnitComponentDescription.componentType = kAudioUnitType_Output;
    _outputUnitComponentDescription.componentSubType = kAudioUnitSubType_RemoteIO;
    _outputUnitComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
    _outputUnitComponentDescription.componentFlags = 0;
    _outputUnitComponentDescription.componentFlagsMask = 0;
    AUGraphAddNode(_graph, &_outputUnitComponentDescription, &_outputNode);
    _mixerUnitComponentDescription.componentType = kAudioUnitType_Mixer;
    _mixerUnitComponentDescription.componentSubType = kAudioUnitSubType_MultiChannelMixer;
    _mixerUnitComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
    _mixerUnitComponentDescription.componentFlags = 0;
    _mixerUnitComponentDescription.componentFlagsMask = 0;
    AUGraphAddNode(_graph, &_mixerUnitComponentDescription, &_mixerNode);
    AUGraphConnectNodeInput(_graph, _mixerNode, 0, _outputNode, 0);
    AUGraphOpen(_graph);
    AUGraphNodeInfo(_graph, _outputNode, NULL, &_outputUnit);
    AUGraphNodeInfo(_graph, _mixerNode, NULL, &_mixerUnit);
    _generatorUnitComponentDescription.componentType = kAudioUnitType_MusicDevice;
    _generatorUnitComponentDescription.componentSubType = kAudioUnitSubType_RemoteIO;
    _generatorUnitComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
    _generatorUnitComponentDescription.componentFlags = 0;
    _generatorUnitComponentDescription.componentFlagsMask = 0;
    for(int i=0; i< [_urlList count]; i++)
    SoundBuffer* soundBufferTemp = [_bufferSoundList objectAtIndex:i];
    AURenderCallbackStruct renderCallbackStruct;
    renderCallbackStruct.inputProc = MyFileRenderCallback;
    renderCallbackStruct.inputProcRefCon = soundBufferTemp;
    AudioStreamBasicDescription* inputAsbd = [soundBufferTemp getASBD];
    err = AudioUnitSetProperty(_mixerUnit,
    kAudioUnitProperty_StreamFormat,
    kAudioUnitScope_Input,
    i,
    inputAsbd,
    sizeof(AudioStreamBasicDescription));
    UInt32 zero = 0;
    err = AudioUnitSetProperty(_mixerUnit,
    kAudioOutputUnitProperty_EnableIO,
    kAudioUnitScope_Input,
    kInputBus,
    &zero,
    sizeof(zero));
    err = AUGraphSetNodeInputCallback(_graph,
    _mixerNode,
    i,
    &renderCallbackStruct);
    This works well, for the recording AudioUnit I did the following:
    OSStatus err;
    AudioComponentDescription audioComponentDescription;
    AudioComponent audioComponent;
    audioComponentDescription.componentType = kAudioUnitType_Output;
    audioComponentDescription.componentSubType = kAudioUnitSubType_RemoteIO;
    audioComponentDescription.componentManufacturer = kAudioUnitManufacturer_Apple;
    audioComponentDescription.componentFlags = 0;
    audioComponentDescription.componentFlagsMask = 0;
    audioComponent = AudioComponentFindNext(NULL, &audioComponentDescription);
    err = AudioComponentInstanceNew(audioComponent, &_audioUnit);
    UInt32 size;
    size = sizeof(AudioStreamBasicDescription);
    err = AudioUnitGetProperty(_audioUnit,
    kAudioUnitProperty_StreamFormat,
    kAudioUnitScope_Input,
    1,
    &_soundFileDataFormat,
    &size);
    _soundFileDataFormat.mSampleRate = 44100.00;
    AudioUnitSetProperty(_audioUnit,
    kAudioUnitProperty_StreamFormat,
    kAudioUnitScope_Input,
    kInputBus,
    &_soundFileDataFormat,
    size);
    AudioUnitSetProperty(_audioUnit,
    kAudioUnitProperty_StreamFormat,
    kAudioUnitScope_Output,
    kOutputBus,
    &_soundFileDataFormat,
    size);
    AURenderCallbackStruct renderCallbackStruct;
    renderCallbackStruct.inputProc = MyRecorderCallback;
    renderCallbackStruct.inputProcRefCon = self;
    UInt32 one = 1;
    UInt32 zero = 0;
    err = AudioUnitSetProperty(_audioUnit,
    kAudioOutputUnitProperty_EnableIO,
    kAudioUnitScope_Input,
    kInputBus,
    &one,
    sizeof(one));
    err = AudioUnitSetProperty(_audioUnit,
    kAudioOutputUnitProperty_EnableIO,
    kAudioUnitScope_Output,
    kOutputBus,
    &zero,
    sizeof(zero));
    err = AudioUnitSetProperty (_audioUnit,
    kAudioOutputUnitProperty_SetInputCallback,
    kAudioUnitScope_Global,
    0,
    &renderCallbackStruct,
    sizeof(AURenderCallbackStruct));
    err = AudioUnitInitialize(_audioUnit);
    Then in I setup a file to write in:
    - (void) openFile
    OSStatus err;
    err = ExtAudioFileCreateWithURL((CFURLRef) _soundFileUrl,
    kAudioFileCAFType,
    &_soundFileDataFormat,
    NULL,
    kAudioFileFlags_EraseFile,
    &_extAudioFileRef);
    err = ExtAudioFileSetProperty(_extAudioFileRef,
    kExtAudioFileProperty_ClientDataFormat,
    sizeof(AudioStreamBasicDescription),
    &_soundFileDataFormat);
    err = ExtAudioFileWriteAsync(_extAudioFileRef,
    0,
    NULL);
    All this things works well (I check by printing err in the log which I removed here for clarity).
    And then in the callback for recording I do the following:
    static OSStatus MyRecorderCallback(void *inRefCon,
    AudioUnitRenderActionFlags* inActionFlags,
    const AudioTimeStamp* inTimeStamp,
    UInt32 inBusNumber,
    UInt32 inNumFrames,
    AudioBufferList* ioData)
    OSStatus err= noErr;
    AudioUnitRecorder* auRec = (AudioUnitRecorder*) inRefCon;
    [auRec allocateAudioBufferList:1 size:inNumFrames*4];
    err = AudioUnitRender(auRec.audioUnit,
    inActionFlags,
    inTimeStamp,
    inBusNumber,
    inNumFrames,
    auRec.audioBufferList);
    err = ExtAudioFileWriteAsync(auRec.extAudioFileRef,
    inNumFrames,
    auRec.audioBufferList);
    return err;
    (Then I close the file after recording at the same time I close the AudioUnit)
    Now the strange thing is that all this works perfectly well in the simulator: I can record and play at the same time but on the device, the callback for recording is not ran (I check by trying to print something in the log in the callback function.) which men no writing in the file and an empty file in the end.
    Any one has any idea of what could be causing this?
    Thanks
    Alexandre

    Just in case some one might need it, I solved my problem:
    I simply needed to initialize the AudioSession before playing/recording. I did so with the following code:
    OSStatus err;
    AudioSessionInitialize(NULL, NULL, MyInterruptionListener, self);
    UInt32 sessionCategory = kAudioSessionCategory_PlayAndRecord;
    err = AudioSessionSetProperty (kAudioSessionProperty_AudioCategory,
    sizeof (sessionCategory),
    &sessionCategory);
    AudioSessionSetActive(TRUE);

  • Nano 6 gen will not play at the same time it is charging

    My Nano 6 gen will not charge and play at the same time via USB on a windows computer.  It has in the past, but now it will only charge and be recognized to the computer as an external drive.  If I "eject" it, it stops charging.  Not sure what to do.

    Is it set to Manually manage music, or Enable disk use, on the iPod's Summary tab in iTunes? If so, it will not operate as an iPod (when connected to your computer's USB port) while it is recognized by iTunes (and Windows).  It is acting as a storage "disk."
    However, if you eject the iPod (using the button next to the iPod in iTunes) and leave it connected to the USB port, if should only receive power from the port.  It should then operate as an iPod.  It should also continue to charge, if it is not fully charged already.
    In the past, you probably had it set to automatically sync, instead of Manually manage music, with disk use NOT enabled.  Then, the iPod would operate as an iPod when connected, except during the time when iTunes syncs the iPod.

  • HT204370 why does my video and sounds not play at the same time when watching movies

    why does my video and sounds not play at the same time when watching movies

    Welcome to the unity.
    Upon which device are you watching your movies and are you using a home theatre system for your audio.

  • HT201303 I have rented 2 movies the past 9 days and they won't transfer to my iPad - error message says that they cannot be played on my iPad.  I haven't watched either movie and this is the first time I have ever had this happen.

    I have rented 2 movies the past 9 days and they won't transfer to my iPad (first generation).  Get the same error message that says they cannot be played on my iPad.  I haven't watched either movie and this is the first time I have ever had this happen after several successful movie rentals and transfers.

    When you have a query please post the feed URL rather than its contents. For the record, yours is at
    http://www.honywoodschool.com/podcast/44986
    I don't have an iPad to test this, so I can only refer you to Apple's Podcast Tech Specs page:
    http://www.apple.com/itunes/podcasts/specs.html#formattingvideo
    This says that the maximum video size for an iPad is 1024x768 - your latest episode is 1280x720.
    Slightly confusingly, it also says
    'iPad & Apple TV can play the following video formats:
    H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format'
    which suggests that mp4 files are even more limited.
    Incidentally your feed gives this URL for the media file:
    http://www.honywoodschool.com/user/59/133934.mp4
    However when downloaded this produces a file called 'howtosetupappeid.mp4' so soe sort of redirect appears to be in place, and these can sometimes cause trouble. It's better to link directly to the file - it's possible that the iPad doesn't handle the redirect.
    That's all I can suggest: if it still doesn't cover the problem I can only refer you to the iPad forum where someone may be able to actually try your podcast and offer a comment.

  • How to open and save pictures from 1 folder at the same time?

    Is there a way to open and save pictures from 1 folder at the same time?
    I'm creating a vi that resizes the picture but I want to do it with 1 folder at a time... Is this possible?
    greetings!

    Hi Kway,
    Here you are. I wrote a file a customer times ago & It did what you want!
    Just see the attachements and keep me inform.
    Regards,
    Julien Roland - District Sales Manager
    NI Belgium - Technical Support
    Don't forget to rate a good answer
    Attachments:
    Test existing Files.vi ‏23 KB
    Delete files from array of files (SubVI).vi ‏16 KB

  • An error ocurred while loading this content! Ive using my ATV for more than 6 months and last week i update the sw and since then i have rented two movies and keep seeing the same message. I have reset the ATV two times without success. Any suggestions?

    I keep getting this message: AN ERROR OCURRED WHILE LOADING THIS CONTENT
    ATV was working fine until i did a version update last week. Since then i have rented two movies and keep getting the same message
    I restarted the ATV - no success
    I reset my wireless - no success
    I reset my ATV - no success
    netflix is working fine since i was able to see a movie there. Youtube was also working fine. I think there should be something wrong with iTunes
    Any ideas?

    I keep getting this message: AN ERROR OCURRED WHILE LOADING THIS CONTENT
    ATV was working fine until i did a version update last week. Since then i have rented two movies and keep getting the same message
    I restarted the ATV - no success
    I reset my wireless - no success
    I reset my ATV - no success
    netflix is working fine since i was able to see a movie there. Youtube was also working fine. I think there should be something wrong with iTunes
    Any ideas?

  • Im worried about the battery percentage while play a game on my iphone 4s.so that,i decided to play a games and charging at the same time.is it problem on my battery ? im to worried.please give a conclusion.

    Im too worried about the battery percentage while playing a game on my iphone 4s.so that,i decided to play a games and charging at the same time.im too worried for my battery problem on the future.please give a conclusion.

    It is perfectly fine to use the phone while charging it.

Maybe you are looking for