Save a .wid file to the local machine.

hello,
I've just started developing a java jsp client using BO report engine sdk.
I'm looking for a way to retrieve a .wid from the CMS and save it on the local machine.
I have been looking around in the forum and I have seen that it could be done using [IIObject.getFiles()|Re: Save Webi Document Locally] collection.
I'm still new to BO programming so I need a hint on how to implement this.
Thank you.
Regards.
Bob

Hey Leo,
Actually, I found a KnowledgeBase article on our website which describes this exact process, and it's not necessary to modify the UUT container. I tried this method and was successful in saving the ASCII report to the table. This KB mentions a ModelNumber parameter as its example. Instead, for our situation, I made a new Local variable in my process model called "ASCIIReport" and stored the value of Locals.Report in there as soon as the report is generated. Then I log this Locals.ASCIIReport variable to the database using the method described in the KB. It appeared to work properly.
Also, please note that this method is only valid for the TestStand 2010 and older process models. In newer versions of TestStand, we've changed the way reporting and database logging works to use a plugin architecture, and this is partially what Scott was referring to when he mentioned that these two features don't "know" about each other. If you're currently using the TestStand 2012 or newer process model, or if you plan to migrate to those models in the future, further work will be required to log the text report to the database. The method in the linked KB should work for the legacy models, however.
Daniel E.
TestStand Product Support Engineer
National Instruments

Similar Messages

Getting Datapump Export Dump file to the local machine

I apologize to everyone as this is a duplicate post.
Re: Getting Datapump Export Dump file to the local machine
My initial thread(started yesterday)was in 'Database General' and didn't get much response today. Where do i post questions on EXPORT/IMPORT utilities?
Anyway, here is my problem:
I want to take the export dump of itemrep schema in orcl database (in a remote machine). I have an Oracle server (10G Rel2) running in my local Windows machine. I have created a user john with necessary EXPORT/IMPORT privileges in my local db. Then i created a Directory object,ie a folder named datapump in my local hard drive and granted READ WRITE privileges to john.
So john, who is a user in my local machine's oracle db is going to run the expdp utility.
expdp john/jhendrix@my_local_db_alias SCHEMAS=itemrep directory=datapump logfile=itemrepexp.log
The above command will fail because it will look for itemrep schema inside my local db, not the remote db where the itemprep is actually located. And you can't qualify the schemaname with its db in the SCHEMAS parameter (like SCHEMAS=itemrep@orcl).
Can anyone provide me a solution for this?

I think you can initiate the datapump exp utility from your client machine to export a schema in a remote database.But, Upon execution,oracle looks for the directory in the remote database and not on your local machine.
You're inovoking expdp from a client (local DB) to export data from a remote DB.
So, With this method, you can create the dumpfiles only on the Remote server and not on the local Machine.
You can perform a direct import instead of export using the NETWORK_LINK option.
Create a DBlink from your local and Remote DB and verify the connection.
Then,Initiate the Impdp from Your local machine DB using the parameter network_link=<db_link of the Remote DB> to import the schema.
The advantage of this option eliminates the Dumpfile creation at the Server side.
There are no dumpfiles during the import process. the Data is imported directly to the target schema.

Upload and save an Excel file from a local machine to SAP

I am looking for a transaction which allows me to upload an Excel file from a local machine to SAP and save this file (the users should be able to edit the file in SAP afterwards).
Then I would like to open and read the data from the file with the help of a function module which works as a background job.
Unfortunately, I cannot use the application server because our users do not have the authorization to save files on it. Besides, the application server is not able to process Excel files.
Thank you in advance.
Stephan Klumpp

Hi Stephan,
You can do this using OLE technology. Bu you will have performance issues.
Can you check the below demo programs? It has similar functionality. I am able to create excel sheet from sap and also able to save the data in the sap.
SAPRDEMOEXCELINTEGRATION
SAPRDEMOEXCELINTEGRATION2
Please also check the below rograms for more help.
SAPRDEMOACTIVEXINTEGRATION
SAPRDEMODOCUMENTCONTAINER
SAPRDEMODOCUMENTCONTAINER2
Thanks
Ramakrishna

Write a file on the local system with an applet

Hi,
I am programming a user interface using HTML and now I would need an applet to write parameters into a plain text file.All this running on the same machine,with no network connection at all,and with I.E.
All my attempts have failed because of security reasons,but I thought it was possible to write a file on the local machine where the applet source is.
Can someone help me ? Please note that I am not a confirmed java user,so be as detailed as possible in your response !
Thanks a lot !
Sebastien

pls go to ur jdk.13\bin and type POLICYTOOL.
Click Add Policy Entry.
Click Add Permission
From the Listbox select ALLPermission and Click OK.
Then Click Done.
Then from the menu bar,
File -> Save As
then give the file name as .java.policy in ur home directory(c:\winnt\profiles\urname\.java.policy).
close the window.
these are the steps to give all permission.

Alternative option to updating the services file on the local computer

Hi,
Our project needs to add updates to the file C:\windows\system32\drivers\etc\services in order to allow excel reports to work from the SAP enterprise portal.
The client will need to apply this change in the services file to all the desktop computers of the end-users. They are now asking whether there is an alternative solution to updating the services file on the local machine. Our team does not think that there is one but maybe one of you experts out there can provide some more insight.
Any help would be greatly appreciated.
Thanks.
Best Regards,
Giwan Persaud

For our normal sapgui rollout we never change the services file.
This is only possible if you change in saplogon.ini the MSSrvPort section, the names to numbers:
instead of
Item88=sapmsPS1
you use
Item88=3600
Then you don't need the services file ( excepte the standard ones which you can rollout once )
sapdp*
sapgw*
you to check if this works for Excel also!

Can somebody can tell me is CC for team can support to save the files in the local area without using the cloud ?

Can somebody can tell me is CC for team can support to save the files in the local area without using the cloud ?

The desktop applications are still installed on your computer, and the files are also saved on your computer.
Optionally you can upload files with a browser to https://creative.adobe.com/files, or sync up files using the file sync that is part of the Creative Cloud desktop application. The online file storage is private to you, no one else can see it your files.
If you do want to share your files there are two options:
You can Collaborate, which is sharing a folder with another Adobe ID. Only the person you collaborate with can see the folder.
You can use Send Link to send a publicly accessible url to a file or folder.

Check if the file exists in the local machine...

Hi,
I am getting a problem while checking if the local file exists or not. In the first case the server is same as my local machine. When I try to test if the file exists or not using FILE.exists() it works because I am looking for the file in my machine.
But when I move the code in Unix the file.exists( ) tries to look in the unix box and not the local machine. My question is how to read it from the local machine?
We are using jdk v1.2.2 and Iplanet App server v6.0.
Thanks
Amol

What do you mean by "when I move the code in UNIX..."?

Microsoft.Jet.OLEDB.4.0' provider is not registered on the local machine. at System.Data.OleDb.OleDbServicesWrapper

HI
when i copy asp.net 3.5 application from IIS7 to IIS 8 in windows server 2012 and browse the application and try to save data in oracle , i get following error in Event viewer
Log Name: Application
Source: ASP.NET 4.0.30319.0
Date: 4/6/2015 2:53:21 PM
Event ID: 1309
Task Category: Web Event
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 17/06/36 02:53:21 ?
Event time (UTC): 17/06/36 11:53:21 ?
Event ID: 34f214e1dcdf45f5ad8450739c954494
Event sequence: 24
Event occurrence: 1
Event detail code: 0
Application information:
Process information:
Process ID: 18724
Process name: w3wp.exe
Account name: TEST\splaw
Exception information:
Exception type: InvalidOperationException
Exception message: The 'Microsoft.Jet.OLEDB.4.0' provider is not registered on the local machine.
at System.Data.OleDb.OleDbServicesWrapper.GetDataSource(OleDbConnectionString constr, DataSourceWrapper& datasrcWrapper)
at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.OleDb.OleDbConnection.Open()
at printLawsuit.RetJudgement(Int32 x) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 2374
at printLawsuit.Page_Load(Object sender, EventArgs e) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 44
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
Request URL: http://-----:50/executionreq/printLawsuit.aspx
Request path: /executionreq/printLawsuit.aspx
User host address: ---3.184
User:
Is authenticated: False
Authentication Type:
Thread account name: TEST\Spfarm
Thread information:
Thread ID: 16
Thread account name: TEST\Spfarm
Is impersonating: False
Stack trace: at System.Data.OleDb.OleDbServicesWrapper.GetDataSource(OleDbConnectionString constr, DataSourceWrapper& datasrcWrapper)
at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.OleDb.OleDbConnection.Open()
at printLawsuit.RetJudgement(Int32 x) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 2374
at printLawsuit.Page_Load(Object sender, EventArgs e) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 44
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="ASP.NET 4.0.30319.0" />
<EventID Qualifiers="32768">1309</EventID>
<Level>3</Level>
<Task>3</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-06T11:53:21.000000000Z" />
<EventRecordID>174735</EventRecordID>
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data>3005</Data>
<Data>An unhandled exception has occurred.</Data>
<Data>17/06/36 02:53:21 ?</Data>
<Data>17/06/36 11:53:21 ?</Data>
<Data>34f214e1dcdf45f5ad8450739c954494</Data>
<Data>24</Data>
<Data>1</Data>
<Data>0</Data>
<Data>/LM/W3SVC/3/ROOT/ExecutionReq-1-130727947211114471</Data>
<Data>Full</Data>
<Data>/ExecutionReq</Data>
<Data>C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\</Data>
<Data>TSHAREPINT2013</Data>
<Data>
</Data>
<Data>18724</Data>
<Data>w3wp.exe</Data>
<Data>TEST\splaw</Data>
<Data>InvalidOperationException</Data>
<Data>The 'Microsoft.Jet.OLEDB.4.0' provider is not registered on the local machine.
at System.Data.OleDb.OleDbServicesWrapper.GetDataSource(OleDbConnectionString constr, DataSourceWrapper& datasrcWrapper)
at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.OleDb.OleDbConnection.Open()
at printLawsuit.RetJudgement(Int32 x) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 2374
at printLawsuit.Page_Load(Object sender, EventArgs e) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 44
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
</Data>
<Data>http://----:50/executionreq/printLawsuit.aspx</Data>
<Data>/executionreq/printLawsuit.aspx</Data>
<Data>10.169.3.184</Data>
<Data>
</Data>
<Data>False</Data>
<Data>
</Data>
<Data>TEST\Spfarm</Data>
<Data>16</Data>
<Data>TEST\Spfarm</Data>
<Data>False</Data>
<Data> at System.Data.OleDb.OleDbServicesWrapper.GetDataSource(OleDbConnectionString constr, DataSourceWrapper& datasrcWrapper)
at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection,
</Data>
</EventData>
</Event>
adil

Hi,
As this question is more relate to iis, I suggest you post it to IIS Forum, you will get more help and confirmed answers from there.
http://forums.iis.net/
Best regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

In Numbers 08 is it possible to add a link to a file on the local disc within a cell?

In Numbers 08 is it possible to add a link to a file on the local disc within a cell?

As it's a feature asked several times, maybe it will be available in the next version.
I don't know features available in Excel.
Sometimes ago I posted an AppleScript which may perhaps fit your needs.
If you insert in a table pathnames of files stored in your HD, select the cell, trigger the script, open the file.
Here is an updated version :
--[SCRIPT open_a_file]
Enregistrer le script en tant que Script : open_a_file.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Library:Scripts:Applications:Numb ers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner la cellule contenant le chemin d'accès
Aller au menu Scripts , choisir Numbers puis choisir “open_a_file”
ouvre le fichier.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
--=====
Save the script as a Script: open_a_file.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select the cell containing the pathname
Go to the Scripts Menu, choose Numbers, then choose “open_a_file”
open the file
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
Save this script as a … Script in the "Folder Actions Scripts" folder
<startupVolume>:Library:Scripts:Folder Action Scripts:
--=====
Yvan KOENIG (VALLAURIS, France)
2010/02/02
2011/04/28 - replaced the getSelParams handler by the get_SelParams one
--=====
on run
 set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
 tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
 set maybe to value of cell rowNum1 of column colNum1
 end tell -- Numbers
 tell application "Finder" to open maybe
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
on get_SelParams()
 local d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2
 tell application "Numbers" to tell document 1
 set d_Name to its name
 set s_Name to ""
 repeat with i from 1 to the count of sheets
 tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
 if maybe is not 0 then
 set s_Name to name of sheet i
 exit repeat
 end if -- maybe is not 0
 end repeat
 if s_Name is "" then
 if my parleAnglais() then
 error "No sheet has a selected table embedding at least one selected cell !"
 else
 error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
 end if
 end if
 tell sheet s_Name to tell (first table where selection range is not missing value)
 tell selection range
 set {top_left, bottom_right} to {name of first cell, name of last cell}
 end tell
 set t_Name to its name
 tell cell top_left to set {row_Num1, col_Num1} to {address of its row, address of its column}
 if top_left is bottom_right then
 set {row_Num2, col_Num2} to {row_Num1, col_Num1}
 else
 tell cell bottom_right to set {row_Num2, col_Num2} to {address of its row, address of its column}
 end if
 end tell -- sheet…
 return {d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2}
 end tell -- Numbers
end get_SelParams
--=====
on decoupe(t, d)
 local l
 set AppleScript's text item delimiters to d
 set l to text items of t
 set AppleScript's text item delimiters to ""
 return l
end decoupe
--=====
on parleAnglais()
 local z
 try
 tell application "Numbers" to set z to localized string "Cancel"
 on error
 set z to "Cancel"
 end try
 return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
Oops, I forgot that you are asking about Numbers '08 which hasn't AppleScript support.
Yvan KOENIG (VALLAURIS, France) jeudi 28 avril 2011 16:26:39
Please :
Search for questions similar to your own before submitting them to the community

The OraOledb.Oracle is not registered on the local machine.

Hi Everyone,
I am having Windows XP operating system with Service pack 2 on my computer. I also using Microsoft.Net 2003 & Oracle 9.x for creating a client-server Application. I installed the Oracle provider from OraWin9204.exe which i was downloaded from the Oracle's site. But I am getting the above mentioned problem "The OraOledb.Oracle is not registered on the local machine", while i m executing the open method of the Connection object of ADO.NET. I also checked the permission on ora92 (ORACLE HOME DIRECTORY) folder and gave full control to my username. But the problem remains same.
Can anybody have any idea? Please help me on [email protected]
Thanx
Rahul Ratnaker

make manual registration of following file.
[oracle_Home]\ora92\bin\OraOLEDB.dll
Enjoy
Rahul Ratnaker

"The 'VFPOLEDB.1' provider is not registered on the local machine" in SSRS 2008

Hi,
I installed Visual Foxpro OLE DB driver for accessing dbf file and tried to get the data from the dbs file through BIDS.
I made one report using BIDS its working fine.
But once i deployed this report to SSRS its giving an error that “The 'VFPOLEDB.1' provider is not registered on the local machine."
My SQL Report services is 64 bit i realaized that Visual Foxpro OLE DB will not work in 64 bit application.
Its there any work arround for these kind of issue. I need to keep 64 bit ssrs because this is production server other reports are there.
Please let me know is there any solution.

Hi iqbalkmk,
As you know the report designer is 32 bit, if you have installed the 32 bit data provider it will works fine in the designer but not work on the 64 bit report server.
When you deploy a report to a 64-bit report server (x86), the report server must have natively compiled 64-bit data providers installed. Wrapping a 32-bit data provider in 64-bit interfaces is not supported.
In your scenario, please try to do below setting to have a try:
Click the IIS manager in the start.
Edit the Advanced Properties of the application pool in which the application is running and set "Enable 32-Bit Applications" to "True". If you don't do this you see the error message that kicked off this whole thread.
More details information:
Data Sources Supported by Reporting Services (SSRS)
Similar thread for your reference：
The 'VFPOLEDB.1' provider is not registered on the local machine
The 'VFPOLEDB.1' provider is not registered on the local machine
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

I need help with Active Content running in the local machine

Hey. I'm in a dead line ... and I'm in trouble: I programmed
a web-site with a flash-menu that uses getURL to connect with the
pages. This web work in the internet but doesn't in the local
machine. I need to distribute it in a CD also, so i need the menu
working in the local machine. I'd tried all the tricks i found in
internet but....no success. Any suggestion....Thanks a lot.

quote:
I could make suggestion, but honestly ... I'm afraid I'll
only say
something you've already seen! I mean, *all* the tricks on
the Internet?
lol That's a lot. Have you tried inserting the "mark of the
web" on the
HTML page that contains the SWF?
http://msdn.microsoft.com/en-us/library/ms537628(VS.85).aspx
In Dreamweaver, see Commands > Insert Mark of the Web.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."
Of course I did. Anyway, in theory it will work only in
Explorer, but i have the same problem with the other navigators.
The problem is very simple: if I publish de flash-menu for
ACCESS LOCAL FILES ONLY I resolve the problem, but i lost the GET
variables than I'm using for trace the option selected in the menu
to mark it in the next page. In the other hand, if i publish for
ACCESS NETWORK ONLY simply the menu doesn´t work in a local
machine in any of the navigators.
I'm desperately seeking Su...sorry, Solution. (lol)

Delete flat file from the local drive after downloading in the program

how to delete flat file from the local drive after downloading in the program
I am using gui_upload to upload flat file data in internal table. and after that i dont want that flat file in the disk. i want to delete it.

Once the file has been uploaded into the internal table call the FILE_DELETE method of the class CL_GUI_FRONTEND_SERVICES.
DATA: v_rc TYPE i.
CALL METHOD cl_gui_frontend_services=>file_delete
EXPORTING
filename = 'C:\TEMP\MATERIAL.TXT'
CHANGING
rc = v_rc
EXCEPTIONS
file_delete_failed = 1
cntl_error = 2
error_no_gui = 3
file_not_found = 4
access_denied = 5
unknown_error = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Regards
Kathirvel

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How do I access my back up files from the time machine if my computer was stolen?

Hi, how do I access my back up files from the time machine if my mac book pro was stolen? I have a mac book air and mac too. But not sure how I can get back all the files from the stolen computer from my time capsule

On the Mac Book Air or other Mac that you have, use Migration Assistant to transfer files from the Time Machine backups of the Mac that was taken.
Macintosh HD > Applications > Utilities > Migration Assistant

Save a .wid file to the local machine.

Similar Messages

Maybe you are looking for