Save and make file name change

When I save as, I want the image to be the name of the file I type so that all subsequent changes can be saved only by clicking "save" and not having to browse to and rename the file EVERY TIME. Sometimes this works properly, sometimes it doesn't. It seems very random.
I think it has something to do with "save as a copy" but more often than not, that option is greyed out so I couldn't set it if I wanted to.

Photoshop invokes "Save As Copy" functionality when it senses you can't save all the things in your image document in the format you've chosen.
For example, if an image has layers, or channels beyond R, G, and B, or is in 16 bit mode, it will not be able to save all these things in a JPEG. Thus it invokes "Save As Copy" functionality, and makes the assumption you'd like to save the whole document, including all the extra stuff, in a separate master file in a format that can handle everything - e.g., .psd.
This leads to this (normal) behavior:
1. You work on a design or photo that has a bunch of fancy stuff in it (e.g., some layers, some masks, some extra channels, in 16 bit modes).
2. You Save As a master .psd file. This does NOT invoke Save As Copy, and DOES set the default save filename.
3. You work on it some more.
4. You Save As a .jpg file - for example to prepare for publishing it. This invokes Save As Copy and the default filename remains .psd.
5. You try to exit Photoshop and it tells you that you haven't saved your .psd master file, so you save it.
If you want the Save As operation to reset your default filename, flatten it, remove channels, lower color depth, or whatever to make it compatible with the format you're saving, so that Save As Copy isn't forced. Or Save As another different .psd or .tif that can handle all those features.
Hope this helps with understanding.
-Noel

Similar Messages

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

How do I get PDF files to *automatically* save as the file name provided by the source?

When I download a PDF file in Firefox, the file name changes from whatever name source used (e.g, important-report.pdf) to a miscellaneous group of characters (e.g., X2ba5zt.pdf). I often want to save the file using the 'source' name. I realize that can so do by changing the file name, but I would like to know if there is a way to set the default so that the source file name is used.

I am not seeing that behaviour. If I right-click a link to a .pdf file, I get the file saved with the original filename.
Maybe one of the settings in about:config controls that?
pdfjs.previousHandler.preferredAction is a setting that has a value of 4 with my setup. I have no idea what that means, and I could not find any explanation anywhere. You could try using different numbers for that value and see if any make any difference. Why has nobody bothered to explain that setting anywhere?

Saving/exporting issue in Windows 7-file name changes when trying to navigate

I just got Windows 7 on my computer and am running ID CS5. The weirdest problem happens when I try to save as or export a file. The dialog box comes up and normally, I would be able to select a folder I want to navigate to just by typing the folder name, but what is happening is that the first letter goes to a folder, but upon typing the second letter, it starts changing the name of my file.
So for example, I am saving a file ABC.indd and I go to navigate to save it in a folder called Project XYZ. When I type in "P" to get to that folder name, it jumps right to the first folder starting with P. However, upon typing "r" my file name changes from ABC.indd to "r.indd." If I kept typing, it would become "roject XYZ.PDF."
This happens when saving as a file or if I am exporting a PDF. Our entire marketing department or 6 people was recently upgraded from XP to 7 and we all have this problem in ID. This does not happen in Illustrator or Photoshop and it has our IT department baffled. It is driving us crazy though because we make dozens of files a day and now have to manually scroll through long file structures when exporting PDFs, which is so time consuming, not to mention aggravating.
In searching for this problem, I found another poster on a different website who has the same issue, but no one had any suggestions.

Tell whomever is emailing the file to zip it first.

InDesign CS4: File names change to string of numbers

Occasionally, one of our users will save an InDesign CS4 file, only to have the file name change. For example, a file originally named "#kwn25501.bcbsNM.indd" was saved as "#kwn25501.bc157-1223857848."
If the user is not aware that this has happened, things can go horribly, terribly wrong in our production environment. The "numbered" file may be missing key elements, or be somehow be corrupt in some fashion. In one case, this led us to having to reprint a job because the "numbered" file was missing a photo; somehow, that file was used (and perhaps renamed after the fact) to create the final output.
We use Macs running InDesign CS4 6.0.5. Some of our Macs are running Tiger 10.4.11, while others are running Leopard 10.5.8. The problem seems to related to the Leopard machines, although that is not 100 percent certain at this point. All of these Macs are bound to Active Directory and save files to a Windows 2003 server. I know Adobe recommends against working on files over a network, but perhaps there is an explanation for this file renaming aside from network issues.
Any light that can be shed on this issue will be greatly appreciated. Thanks!
Kevin Stauffer

Check to see if maybe your original filename is the problem.
You may need that particular name for a workflow reason, but some of the symbols in the middle of your filename are generally not a good idea. Especially working off of a server, file names should be ONLY alpha-numeric characters, no symbols, no periods (except for the file type) and only underscores or dashes to separate words, no spaces.
The reason is some of those symbols get picked up as machine language and all sorts of bad can happen as a result.
Message was edited by: Michael Riordan

Scripting a file name change as a data merge element.

My goal of the work being done with InDesign is to utilize the Data Merge functionality of InDesign and the, already available, ability to create a new document per record in your data source where the docuement name is changed based on data contained in the data source.
A very simple example of this would be the following:
EXAMPLE
======================
Given the following data source in excel:
First_Name
Last_Name
ResultingFileName
George
Smith
c:\A45.pdf
Mary
Lopez
c:\C99.pdf
Steve
Barns
c:\tmp\XM96TR.pdf
Along with a simple two text box InDesign documents, I would perform a standard data merge with First_Name linked to one text box and Last_Name linked to another. By setting the “Record Limits Per Document” to 1, I would end up with three different documents. By default, the documents would be named Untiltled-1, Untiltled-2 and Untitled-3.
Untitled-1 would contain George and Smith. Untitled-2 would contain Mary and Lopez and Untitled-3 would contain Steve and Barns.
At this point in time, I would run the new created script, which would do the following:
            Rename Untitled-1 to A45 and/or save Untitled-1 as C:\A45.pdf
            Rename Untitled-2 to C99 and/or save Untitled-2 as C:\C99.pdf
            Rename Untitled-3 to XM96TR and/or save Untitled-3 as c:\tmp\XM96TR.pdf
I am open to modifying the manner in which the data merge source is created. For example, separating the path and the file name into separate columns. In addition, I am flexible in putting preset information and/or file save types into the data merge document.
Please feel free to contact me directly at [email protected]
Thanks in advance for the help.
Matt

Hi Matt,
I think it’s better to use an XML-based approach for your task.
I’ve never scripted Data Merge process, but I don’t see a straightforward way of doing it. May be you can create the 3rd textbox on pasteboard or a non-printing layer, which will contain the file path from ‘ResultingFileName’ field, and the contents from which can be used for naming & saving the current file and exporting it to pdf-file. But this approach is so clumsy.
Instead, you’d better to keep your data in excel file, or even better Access or some other database program.
Export the data from it in XML-format.
Then import it to an InDesign file and process it by script. XML support is very powerful in InDesign: you can process your data by xml-rules. I once made a script for a newspaper, which processed data for classified ads. The script applied all formatting, changed colors for different headings and placed images.
Kasyan

WPA8.1 Feature to save and move files between folders and OneDrive Folders

Hi,
I would like to suggest to dev team a new feature to Adobe Reader on Windows Phone.
Today I was done a uggly workarround to save one PDF file on a OneDrive folder to send to my classmates. So I would like a feature to save and move files between folders on SD cards and OneDrive to keep my phone organized.
thank you for your time.

Here:
property aFolder : "a"
property bFolder : "b"
property cFolder : "c"
property dFolder : "d"
property eFolder : "e"
tell application "Finder"
try
set theLocation to the selection as alias
on error
set theLocation to (folder of the front window as alias)
end try
if not (exists folder aFolder of theLocation) then make new folder at theLocation with properties {name:aFolder}
if not (exists folder bFolder of theLocation) then make new folder at theLocation with properties {name:bFolder}
if not (exists folder cFolder of theLocation) then make new folder at theLocation with properties {name:cFolder}
if not (exists folder dFolder of theLocation) then make new folder at theLocation with properties {name:dFolder}
if not (exists folder eFolder of theLocation) then make new folder at theLocation with properties {name:eFolder}
set this_list to every file of theLocation
repeat with i in this_list
if (name of i) begins with "a" then
move i to folder "a" of theLocation
else if (name of i) begins with "b" then
move i to folder "b" of theLocation
else if (name of i) begins with "c" then
move i to folder "c" of theLocation
else if (name of i) begins with "d" then
move i to folder "d" of theLocation
else if (name of i) begins with "e" then
move i to folder "e" of theLocation
end if
set name of (the result) to items 3 thru -1 of (get name of (the result)) as string
end repeat
end tell
(98558)

When downloading files the file name changes name?

When I download files from yahoo email account the file name changes from actual name to securedownlad.doc. Why is this happening and how do I stop it? Is it an email client issue?
Example:
Original file name in email to download is called GeorgiaTechstinks.doc
when downloaded the dl box pops up and file name has changed to securedownload.doc.
I have to go and manually change file name back to GeorgiaTechstinks.doc
any help would be greatly appreciated

See here for information.
(24629)

Photoshop Elements 3.0 Back-Up - File Name Change

I currently run Photoshop Elements 3.0. When I back-up the catalog from within Photoshop, the file names are changed (i.e 100_2424.JPG to BO00012). All of my Premiere Elements 7 projects point to the original file name. If I ever lost that original JPG file, the back-up file would be recovered, but would not be recognized by Premeiere Elements, and thus not be found. Why does the file name change after back-up? How can I retain the original file name during back-up? Thanks.

Once you have taken the backup, all the files are renamed as you mentioned in the post. Its only when you restore the catalog through File->Restore, the files are restored by the original name.

A Good Reference for Aperture, Versions, File Names, Changing & Moving

I was wondering if there is a consensus on a good reference for understanding how Aperture handles files?
Versions and file names.
How do you change them in Aperture?
What happens if you change them in Finder?
Do I need versions? (can't I just us file names?)
What about moving the masters, or changing where there are located at in Finder?
Can I do that in Aperture?
Can I only do that in Finder?
Should I never do that in Finder?
The reason I'm looking for a good reference is because I haven't found one. The user guide (or manual) that comes with Aperture doesn't help with these issues. Search file name and nothing comes back.
I did get a copy Apple Pro Training Series book for Aperture 3. But I don't think it does a good job explaining how Aperture's file system works, especially in relation to Finder.
Rather than fill this forum with endless questions (which could be answered by reading the manual and using it the software) I'd like to get a better understanding, from a good source.
I've only used iPhoto for Mobile Publishing, ATV and now Photo Stream. I don't use it to organize my decades of photos. I don't like having all my photos inside a managed database, which I don't have to do with Aperture. I never understood why you'd want to change the name of a photo in iPhoto, when it never changes the file name. If you send it to someone, after you changed it's name, the other person gets the photo with the original (still in Finder) file name.
Thanks.

I never understood why you'd want to change the name of a photo in iPhoto, when it never changes the file name.
This may help or not but here goes.
There's a distinction to be made between files and the data they contain. The example I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune, some lyrics, recorded it and a copy of that recording is stored in the mp3 file. The file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly that Jpeg / tiff/ raw/ whatever is not your photo, it's a container designed to hold that kind of data. And along with that data comes opportunities: Metadata, for a start. Exif and IPTC contain vast amounts of information - some it very basic, like the date and time the shot was taken - some of it quite complex, like a lot of details of the settings used in the camera.
Aperture, iPhoto et al are all about the data and not the file. Import the file and forget about it. Process the image - crop it, fix red eye, run it through the whole gamut of tools in the App and the file never changes at all. Create multiple versions of the image. But there's still only one file. Name it. You name the photo - and that is an entry in the Exif or IPTC. The name of the photo has nothing to do with the name of the file. Because the file is just the tin for the beans.
Even when you export, unless you specifically choose to export the Master, you are exporting the processed Photo into a different container - that's why you can export Raw as Jpeg, or Jpeg as Tiff. Because the process of export just puts the image into a new container.
Basically, if you want to manage files you need to use a File Manager. But you're using a Photo manager and expecting it to behave like a file manager.
And, of course, apps like Aperture and iPhoto have the option to use the Title of the photo as filename on export to the new file.
Does that muddy the waters?

Dynamic bad and Log file names!!

Hi

Hi
I have the scenario like the data files would be passed as parameter to the mapping , and the mapping would have the premapping procedure which would change the file name in the external table definition. This works fine. But the one more issue I have is that, I would like to change the bad file,log file and discard file name also through this procedure. In other words, for each incoming data file I would like to create a bad ,log and disc file.So How do I accomplish in the present procedure which does the following alter table statement
execute immediate 'alter table '||p_table_name||' location('''
||p_file_name||''')';
Any suggestion would be greatly appreciated
Thanks
Balaji

CS4 Photoshop.exe file name changes

Has anyone had the CS4 Photoshop.exe file change names? I have had this happen on a couple of computers, one machine it happened twice. When CS4 is installed, the Photoshop file name is Photoshop.exe, at some point, the file name changes to PHOTOSHOP_CS4.EXE. I'm going to check with our sys admins to make sure they aren't doing some software push that might be changing it, but thought I would post here in case it was a known issue.

When you find the culprit you might let him know that different Photoshop versions always live in different Program Files subfolders.
-Noel

IPhoto file names changed

I have just noticed that in several of my events the underlying file name of several imported photos has been changed to my assigned Title. Since I didn't think Apple provided a way in iPhoto for Mac to change the file name, and I am not digging into the file structure of iPhoto, I can't change the file name back to that assigned by the camera (and I don't necessarily know it anyway). I see no obvious reason why specific file names were changed. Is there some non-obvious way to change file names that I accidentally stumble upon?

iPhoto 9.4.3. Not sure what you mean by history. It has been in use for some time. No other obvious problems. The file name changes, at least that I have noticed, are from this year and, in particular, this past week. One other observation is that I only happened to notice because I exported a group of photos and saw that a few of the exported names did not have the camera assigned names and then I looked back at iPhoto (hovering the cursor over the title - which gives the file name). Again, the files were exported as a group and no obvious reason for something to change for one rather than another file. It is possible the change took place when I exported the photos rather than earlier as I had no reason to check.

Opening a new file in photoshopcc and the file name is displayed but no white working canvas. you can see it as a layer in the layers panel and if i draw on the grey area i can see int on the layer but not on the main screen.

opening a new file in photoshop cc and the file name is displayed but no white working canvas. you can see it as a layer in the layers panel and if i draw on the grey area i can see int on the layer but not on the main screen.

Graphics card is the problem.
Trying to update drivers now.
Thanks for your help
john

I have a windows 7 desktop with an external hard drive setup on my home network, will i be able to access this on my home network to save and retrieve files from my mac air?

i have a windows 7 desktop with an external hard drive setup on my home network, will i be able to access this on my home network to save and retrieve files from my mac air?

Troubleshooting Home Sharing - http://support.apple.com/kb/TS2972

Save and make file name change

Similar Messages

Maybe you are looking for