Save and Send to Sharepoint error

I'm using Microsoft Word 2010 and a sharepoint 2010 site.
And I'm having troubles with file locations when saving files back to sharepoint library.
First, when I open a file from sharepoint site, edit and try to save, the default location is not the location of the library the file was at.
If I try to do 'File>Save and Send> Save to Sharepoint' and select a recent location,
or if I click onfind location, I get the following error message:
Could not Find http://xxxxx.xxx/DocumentLibraryA/FolderA
The only way I'm able to save is via 'File>Save as' and input the url on
the file name field.
This issue is not happening with every computer I try to open files from sharepoint. On some other computers, I am able to open the file from the library and it comes with the default location, and if I do 'File>Save
and Send> Save to Sharepoint', it opens normaly.
Does anyone knows how to fix this?

Hi,
Please try to add the "Desktop Experience" feature in your computer.
Go to All Programs –> Administrative Tools –> Server Manager. Choose Features –> Add Features
Next, check the "Desktop Experience" feature. On the popup, choose "Add Required Features".
More informaiton is here:
http://petervdberg.blogspot.com/2011/01/how-to-enable-save-and-send-option-in.html
Best Regards
Dennis Guo
TechNet Community Support

Similar Messages

Office 2010 MUI in Finnish and Save and Send function not working after upgrading to Lync 2013 MUI

Problem is as follows. Used to have Office 2010, Outlook 2010 and Lync 2010, everything was working. People used it in Finnish and seemly quite a many of them used the Talleta ja lähetä (Save and Send in Finnish) in Office products.
After upgrading Lync to 2013 version, with Finnish language pack installed with it, the Save and send does not work in Office 2010 if it is used with Finnish as display language. When you try to use it you get a Mapi error and reason is undefined or something,
hard to say what it is exactly in english as the error message is in finnish. On those machines if the display language is changed back to english the Save and send works as it should.
Any ideas?

The problem was caused by the Language Packs for Lync 2013 or Office 2013. Without them all works.
And if you want to just unisntall the 2013 lang packs, then you also need to repair install the office 2010 ones to make it work again.

Email Security Plug-in - Doesn't seem to work with right click or save and send

I've searched the knowledge base but have not located the answer yet.
We have the Encrypt Message plug-in installed to flag the email [SEND SECURE]. This works very well when in Outlook. It does not seem to work when right clicking a file to send outside of Outlook or performing Save and Send from within Microsoft Office. The add-in still shows and users are clicking it and the Send button but the emails are not going securely. We are on Microsoft2010 on mostly XP machines.
How can I get Encrypt Message to work in all instances?
Thank you.
Starla

Andreas
I am getting an error. See below for what I'm choosing and the response. let me know if I'm supposed to be trying to download from another area.
Thanks
Starla
Email Security Plug-in - Doesn't seem to work with right click or save and send
Cisco IronPort Email Security Appliance C370
Release:IPAS
Filename: CiscoEmailSecurity_7-2-0-039.exe
Remove
Details
Release
IPAS
Filename
CiscoEmailSecurity_7-2-0-039.exe
Release Date
25/Oct/2011
Description
Cisco IronPort Email Security Plug-in (Outlook)
Size
32541.84375 KB (33322848 bytes)
Router Checksum
0x553f
MD5
f0c864697d9e1a3e8f5297062943ac50
Email Security Plug-in - Doesn't seem to work with right click or save and send
Save the device to 'My Added Devices' list
More Info
'My Added Devices' list could be found by: 1. Clicking on 'My Cisco' Tab and expanding
    the 'Added Devices' section. 2. Selecting any task specific product
   selector and clicking on 'My Added
    Devices' in left pane.
Email Security Plug-in - Doesn't seem to work with right click or save and send
Set Cisco Notification Alert
More Info
All 'Cisco Notification Alerts' list could be found
by: 1. Clicking on 'My Cisco' Tab and expanding
    the 'Support Notifications' section.
Cisco service contract information indicates you are not authorized to download software for the following product(s):
Cisco IronPort Email Security Appliance C170
Cisco IronPort Email Security Appliance C370
Cisco IronPort Email Security Appliance C650
To download software for other product(s), remove the software for the product(s) listed above.
Or, if you feel this message is in error, please:
1. Email technical support for 24x7 assistance. To expedite your request, please include the following information:
         User ID (Cisco.com ID used to download software)
         Contact Name
         Company Name
         Contract Number
         Product ID
         Desired Software Release or File Name
2. Contact your Cisco Representative, Partner or Reseller to ensure product(s) listed above are covered on a service contract. The Partner Locator link may assist in locating your nearest partner.
3. Associate contracts for those products to your Cisco.com profile using the Instructions found in Profile Manager. After you submit your additional contracts, verification and updates may take up to 6 hours to complete.

Validation at "Save and Send for approval" in Create Expense Report

Hello gurus,
I have an issue where in at Create Expense report we have two options:
1. Save
2. Save and Send for Approval.
When this trip is SAVED and SEND FOR APPROVAL the validation should trigger and error message should appear if expense type XXXX is used in any of the line item of the trip.
I have been told that this can be done by user exit at the backend level. But, at the frontend we will have to make some changes as well.
I know WD JAVA, but a little short on knowledge in WD ABAP.
Could you please help me by telling me as to how to do a validation in this scenario or even if its necessary to do it ?? I mean, is it possible that the backend validation will hold true if someone will create a expense report from the frontend as well ??
Please explain me ...

Hello friend,
Its easy to handle this problem,
To know how you can use the message effectively see this details about the interface,
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/6c/7aae42cd7fb611e10000000a155106/content.htm
For clear understanding about the steps for creating messages see the code below,
http://e-university.wisdomjobs.com/sap-abap-web-dynpro/chapter-105-274/messages-exceptions-and-web-dynpro-abap.html
I think you will be clear after reading this code. Any queries please revert back to me.
Thanks,
Sri Hari

Save and send malfunctioning

i am using microsoft office 2010 and windows 7. no network.
in the last month or so "save and send" from word, excel and adobe pdf's have been malfunctioning. each of these programs delivers to my outlook 2010 outbox and thereafter to the sent box BUT the email is NOT sent - even though it shows in the
sent box!! emails generated within outlook with the same attachments send perfectly. this is very disturbing as there is no error feedback so you assume the email has been sent when it has NOT. this is a repeatable error and occurs every time.
i have tried repairing office from within the control panel/programs/change/repair and i have scan.pst the outlook data file. but this has made no difference.
please can you assist with this serious problem?
many thanks

here is extract from OPMLog.log when trying save and send from word:
2014.07.14 14:36:45 <<<< Logging Started (level is LTF_TRACE) >>>>
2014.07.14 14:36:45 [email protected]: Synch operation started (flags = 00000001)
2014.07.14 14:36:45 [email protected]: UploadItems: 0 messages to send
2014.07.14 14:36:45 [email protected]: Synch operation completed
2014.07.14 14:36:46 [email protected]: Synch operation started (flags = 00000030)
2014.07.14 14:36:46 [email protected]: DoPOPDownload(flags = 00000030, max msg = 000f9c00): full items
2014.07.14 14:36:46 [email protected]: Synch operation started (flags = 00000001)
2014.07.14 14:36:46 POP3 (pop.tiscali.co.za): Begin execution
2014.07.14 14:36:46 [email protected]: UploadItems: 0 messages to send
2014.07.14 14:36:46 [email protected]: Synch operation completed
2014.07.14 14:36:46 [email protected]: Synch operation queued
2014.07.14 14:36:47 POP3 (pop.tiscali.co.za): ========= Initial blob =========
2014.07.14 14:36:47 POP3 (pop.tiscali.co.za): +B104733-1176888802
2014.07.14 14:36:47 POP3 (pop.tiscali.co.za): +B104734-1176888802
2014.07.14 14:36:47 POP3 (pop.tiscali.co.za): +B104735-1176888802
2014.07.14 14:36:47 POP3 (pop.tiscali.co.za): +B104736-1176888802
2014.07.14 14:36:47 POP3 (pop.tiscali.co.za): +B104737-1176888802
2014.07.14 14:36:47 POP3 (pop.tiscali.co.za): +B104738-1176888802
2014.07.14 14:36:47 POP3 (pop.tiscali.co.za): +B104739-1176888802
2014.07.14 14:36:47 POP3 (pop.tiscali.co.za): +B104740-1176888802
2014.07.14 14:36:47 POP3 (pop.tiscali.co.za): +B104741-1176888802
2014.07.14 14:36:47 POP3 (pop.tiscali.co.za): +B104742-1176888802
2014.07.14 14:36:47 POP3 (pop.tiscali.co.za): +B104743-1176888802
2014.07.14 14:36:47 POP3 (pop.tiscali.co.za): +B104744-1176888802
2014.07.14 14:36:47 POP3 (pop.tiscali.co.za): +B104745-1176888802
2014.07.14 14:36:47 POP3 (pop.tiscali.co.za): +B104746-1176888802
2014.07.14 14:36:47 POP3 (pop.tiscali.co.za): +B104747-11768888

Infopath 2010 Save and Send does not attach .xsn file

Hello all, last year we had departments using the "Save and Send" to send their filler forms to a mail box, since that time we have upgraded from 2007 to 2010 InfoPath. Now when the Save and Send feature is used just the xml file is attached?
Any help? thanks

after a little discovery, my biggest problem is I have InfoPath 2010 and Outlook 2013. On a machine with IP 2010 and Outlook 2010 I tested and found only "Restricted" forms allow the template to be sent using Save and Send.
This setting is in the Options/Security and trust.
As long as you have Options/Email attachments set to Form and template + Options/Security and trust set to restricted + matching versions of outlook and InfoPath it works fine. This was nothing more than user error on my part

In our application we have CV Builder and after submit we want to show in pdf format. and also we want save and send option.

In our application we have CV Builder and after submit we want to show in pdf format. and also we want save and send option.

1. For the PDF see TCPDF
2. For saving see PHP Insert Data Into MySQL
3. For sending see Basic PHP mail() Function code to send emails from a form | InMotion Hosting

I am trying to save a large file on Illustrator CS6 and it does not save and instead says "Unknown Error Occurred." What do I do?

I am trying to save a large file on Illustrator CS6 and it does not save and instead says "Unknown Error Occurred." What do I do?
The file has 4 artboards with webpage designs. I tried to take two of the artboards, create a separate doc with those two, and save, but the result was the same.
However, I am able to save simpler, smaller files.
I need to not lose these files and I am afraid to quit and restart and lose my unfinished work.
Any advice?

What happens if you choose this option?

Change Expense report default to Save and Send

I have been looking for a way to override the default in an expense report to be the Save and Send radio button instead of the Save radio button.
I have worked within the configuration and the FITE_EXPENSES webdynpro configuration, but cannot identify any area to change this. Has anyone been able to override this SAP standard default to go to Save and Send?
JLM

There is no setting in standard to make "save and send" the default setting, but how about the option of also hiding the 'save' radio button via the content administration, that is one possibility?
I also saw a suggestion to add modificationby adding an implicit enhancement implementation before the end method statement of the mehtod CONFIGURESAVESTATUS of the component controller of view fite_vc_review. example
for the enhancement:
elem_generaldata->set_attribute(
      exporting
        name = `SETTL_STATUS`
        value = cl_fitv_constants=>gc_settled_status_requested ).
Of course this is a modification however..
Also check your setting for tcode PE03 for feature TRVPA for WRP, here you can select various status' on save"
The documentation in PE03 explains more
"Entry "WRP" for Employee Self-Service:
The entry "WRP" allows you to control the dialog for saving a trip. The
settings apply to the Employee Self-Service (ESS). With some statuses, a
distinction must be made between the process steps "Temporary Save" and
"Save and Send."
Hope these suggestions help.
Sally
Edited by: Sally Redmond on Sep 6, 2011 6:37 PM

How to save and send a form?

Okay, this is driving me NUTS.
I created a fillable form, closed the form for editing and hit file >save.
Went to my desktop, double clicked on the pdf and it opened in Adobe Reader. No interactivity. Can't type anything in the form.
So then I went back in and hit distribute, saved the file to my desktop and tried again. Nope. Still can't open it up and type in it.
What am I doing wrong? I feel so stupid right now. I just want to make a PDF where people can fill out the fields and send it. I've followed guide after guide and it works in the acrobat preview, but not in adobe reader!

I remember this happening to me before. If I'm not mistaken (I may be wrong), I believe you have to open the .pdf, click "file, save as, and "reader extended PDF" --- I am pretty sure that's what has to happen.

Customers are not able to open my Quote form I save and send on email.

I need your help. I have a company provided quote form that is fillable with information that I save and email to clients. I have had many customers say that they cannot open and see the quote I have attached to their email. What am I doing wrong or missing? Please help. Dan

Sorry for the delay; the new forum software does not make it easy to find old topics. But it's getting slowly better...
The forms you are sending out are PDF docs? How exactly are the recipients open them?
There are so many ways people receive emails that some are just bound to fail. E.g. if users use web-based mail, they may open it in a browser like Chrome or Firefox, which both use their own PDF viewer - not the Adobe Reader plugin.
Some people may open their mail on their mobile phone, which may or may not have Adobe Reader installed. Many other combinations are possible.
My advice: don't send e-documents as email attachments, but use a file sharing service like Adobe Acrobat.com and upload, then share the docs with the intended recipients.

I am on a job application wedsite powered by SuccessFactors. I have completed the application but cannot get back down to the bottom of the page for me to save and send the apllication. Please help. It took a long time to complete.

I have been to the bottom of the application site where you can hit either save and return later or apply. but now it stops before the end of the application and won't let me move any further down the webpage.

Samaia wrote:
Recently switched to Mac and I was a IBM keyboard shortcut maniac I love them.
So far I haven't been able to get my Cmd+Down or Cmd+Up working as described (e.g. move cursor to end or beginning of document) when using Word 2008.
So . . . I updated to Word 2011 - and it still isn't working . . . please tell me there is another short key that I haven't found yet. The Cmd+Down and/or Cmd+Up only take me up or down a paragraph and Fn+Up or Down seem to be the equivalent of clicking the scroll bar up and/or down one page worth.
Is it difficult to trigger the menu item entitled "Keyboard Shortcuts" in the Pages Help menu ?
Yvan KOENIG (VALLAURIS, France) mardi 22 mars 2011 19:38:46

Maintaining session problem... Save and send cookie?

Hello,
I have recently switched to programming in Java after programming for a while in C++, so bare with me if I ask dumb questions :) ... In the company I work I have a situation which requires me to connect to a webservice.
I have used WSDL2Java successfully to generate the stub from the WSDL. I can connect and login to the webservice, but for some reason I cannot keep the session active. I send the login request, I receive the correct response, together with the cookie. The thing is I don't know how to extract it and send it along...
I have tried to myStub._getServiceClient().getOptions().setManageSession(true) but that doesn't seem to work. Is there any way to extract the cookie string from the response I get to the login request and then pass it to the following data request?
Thank you very much!

Thanks for the reply... I've tried to find a way to inject it, but I can't really find it... This is what I have got so far:
X1OrderServiceStub stub = new X1OrderServiceStub();
X1OrderServiceStub.Login request= new X1OrderServiceStub.Login();
request.setEmail("[email protected]");
request.setPassword("thanks");
System.out.println("Request : " + request.toString());
X1OrderServiceStub.LoginResponse response= stub.Login(request);
System.out.println("Response : " + response.toString());
X1OrderServiceStub.AccountsList request2= new X1OrderServiceStub.AccountsList();
System.out.println("Request : " + request2.toString());
X1OrderServiceStub.AccountsListResponse response2= stub.AccountsList(request2);
System.out.println("Response : " + response2.toString()); // Result is session expired or not logged
Could you please give me more hints? Thanks a lot!

Save and Close goes to error page after modifying List in Infopath

Hi,
I have a list in Sharepoint 2013 which I have modified using Infopath 2013. After modification, If i open the list in Sharepoint site, i am not able to Save or Close the list. It gives "The webpage cannot be found" error.
Regards, Shreyas R S

Hi,
The new feature Minimal Download Strategy is activated on your site. Can you please deactivate
this feature and see?
It
is available under Site Actions -> Manager Site Features
15/start.aspx# -
This is due to MDS feature enabled on lyour iste.
Please remember to click 'Mark as Answer' on the answer if it helps you

Toplink doenst save and doesnt give an error :(

Hey :)
Sorry for bad english..
I have a method that i user UnitOfWork to save my objects but it doesnt work and doenst give me an exception.
I run on debug mode and i execute all lines without error...i dont know what to do....
Well, this is my methods:
     public void saveOrUpdate(CargaRemarcacaoVO cargaRemarcacaoVO){
          try {
               TbTpCargaRemarcacao tipoCarga = this.findTipoCarga(new Long(1));
               unitOfWork.registerObject(tipoCarga);
               this.saveRegistroCarga(cargaRemarcacaoVO, tipoCarga);
               unitOfWork.commit();
          } catch (Exception ex){
               ex.printStackTrace();
     private TbTpCargaRemarcacao findTipoCarga(Long cdTpCarga){
          TpCargaDAO dao = new TpCargaDAO();
          TbTpCargaRemarcacao pojo = null;
          TipoCargaRemarcacaoVO tipo = new TipoCargaRemarcacaoVO();
          tipo.setCdTpOferta(cdTpCarga);
          tipo.setNovoTipo(false);
          pojo = dao.getTpCargaRemarcacao(tipo.getCdTpOferta());
          return pojo;
     private void saveRegistroCarga(CargaRemarcacaoVO cargaRemarcacaoVO, TbTpCargaRemarcacao tipo){
          TbCargaRemarcacao pojo = new TbCargaRemarcacao();
          pojo.setCdTpCargaRemarcacao(tipo);
          pojo.setDtCarga(cargaRemarcacaoVO.getDtCarga());
          pojo.setDtEtiqueta(cargaRemarcacaoVO.getDtEtiqueta());
          pojo.setDtFaturamento(cargaRemarcacaoVO.getDtFaturamento());
          pojo.setDtFimVigencia(cargaRemarcacaoVO.getDtFimVigencia());
          pojo.setDtInicioVigencia(cargaRemarcacaoVO.getDtInicioVigencia());
          unitOfWork.registerObject(pojo);
The method find works and return me an object but i dont know how to save it...what im doing wrong?
Thanks

Hi,
Most likely you have to adjust WHENEVER SQLERROR and (or) WHENEVER OSERROR settings.
Consider an example below:
C:\> sqlplus /NOLOG
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Nov 1 02:55:29 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> conn max
Enter password:
Connected.
SQL>
SQL> whenever sqlerror continue
SQL>
SQL> exec raise_application_error(-20000, 'Error')
BEGIN raise_application_error(-20000, 'Error'); END;
ERROR at line 1:
ORA-20000: Error
ORA-06512: at line 1
SQL> whenever sqlerror exit
SQL>
SQL> exec raise_application_error(-20000, 'Error')
BEGIN raise_application_error(-20000, 'Error'); END;
ERROR at line 1:
ORA-20000: Error
ORA-06512: at line 1
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, Oracle Label Security, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
C:\>As you can see, with WHENEVER SQLERROR set to EXIT, SQL*Plus session terminates as it encounters any program error.
Similarly, for OSERROR setting:
C:\> sqlplus /NOLOG
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Nov 1 02:57:08 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> conn max
Enter password:
Connected.
SQL>
SQL> start C:\non_existent_file
SP2-0310: unable to open file "C:\non_existent_file.sql"
SQL>
SQL> whenever oserror exit
SQL>
SQL> start C:\non_existent_file
O/S Message: No such file or directory
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, Oracle Label Security, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
C:\>Hope this helps.

Save and Send to Sharepoint error

Similar Messages

Maybe you are looking for