Save as AIF on PC version

I don't see AIF as an option in save as. Is WAV the same? Right now I save as WAV, open in Audacity, save as AIF.

When you click File > Save As.. you should see an option for 'Audio Interchange File Format (*.aif)' If you do not see this option, you might need to make certain Quicktime is installed. This is a free download from apple.com - just make certain you download the Quicktime-only link, unless you need iTunes installed at the same time.

Similar Messages

How do I save a pdf file in version 1.3?

I'm currently using Adobe Acrobat 9.0 PRO.. and I need to save a PDF file in version 1.3. How do I do it?
Please help w/ any kind of reply!!!

Use either Reduce file size (under the Document menu now in AA8) or the PDF Optimizer under the Advanced menu.

How do I save InDesign in an Older version?

I am working with a partner who has an older version of InDesign and cannot open my files, How do I save mine as an older version so that he can work with them?
Thanks inadvance, Linda

What versions are involved? You'll have to export to Interchange format,but whethr you can do it only once, or if yo have to open and re-xport in all intervening versions depends on waht both of you are using.
This is not a great workflow for collaboration, expecially if you use any advanced features in your version that are not supported in theirs. Those will be lost entirely. There is a significant risk of text reflowing and changing line endings, too.

I have InDesign CS 5.5 and my printer does not - can I save it as an older version

I made a document using InDesign 5.5 and sent it as a packaged InDesign file to a printer who cannot open it. Is there a way for me to save it as an older version so I can send it to them?
Thanks

Is there definitely no other solution? I am having the same problem and I know a pdf is great for print ready documents, but I am an Indesign beginner and need to send a version of my document that my printer can work on. Will they be able to work on an .idml file?

Can't save 24 x 36 ai version 9 file when opened in CS6

Can’t save 24 x 36 ai version 9 file when opened in CS6, even when opened as an outline format. I was able to save the file when reduced to 8 x 11, once saved I resized it back to 24 x 36 but it still didn’t work. Any help would be greatly appreciated thanks

Sorry to have taken up your time, I have figured it out. I have about 50 layers and one was bad, process of elimination, I deleted one by one till I found the layer that was causing it to fail. Files I had converted from .DWG to AI coused an error

I am trying to save one picture in different versions- How do I do that- there is nothing that allows me to save as

I am trying to save one picture in different versions- How do I do that- there is nothing that allows me to save as- How do I do that??

http://www.apple.com/aperture/
Regards
TD

Why each time I try to save my day's work,version WITH mark-ups and version w/o, does it say "you have placed a large amount of text on clipboard do you want to access this? What is clipboard and how can I just save my work in its proper file?

I don't get this clipboard thing! I have created two files, one for the MS with mark-ups, and one for the unmarred version, each living in their own spot in my "house." It seems to be merging the two versions and I have to go in and re-paste and then it always says "you have placed a large amount of text on clipboard do you want to be able to access this?" and it prompts me to say no but I am afraid I'll lose my day's work so I just tap cancel. I highlight the day's revision and select "copy" to paste into the unmarked doc. before I save on the marked up or working doc. It is when I try to close that one that the clipboard issue pops up. What can you tell be about saving doc. in two places and how to NOT get it on clipboard? Thanks! I am not super computer savvy so layperson's language much appreciated!

Are you using Microsoft word? Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users. I have seen this message from Microsoft word. It's annoying.
As BDaqua points out...
When you copy information via edit > copy, command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information. Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
You should be saving your work more than once a day. I'd save every 5 minutes. command + s does a save.
Robert

Save as- for Dummies (Numbers version)

Here is a clean way to retrieve Save As… in Numbers.
--(SCRIPT Numbers_save_a_copy]
Enregistrer le script en tant que Script : Numbers_save_a_copy.scpt
déplacer le fichier créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Aller au menu Scripts , choisir Numbers puis choisir “Numbers_save_a_copy”
Le script enregistre une copie du document au premier plan
au format natif de Numbers en ajoutant la date et l'heure au nom du fichier.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
+++++++++
Save the script as a Script: Numbers_save_a_copy.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Go to the Scripts Menu, choose Numbers, then choose “Numbers_save_a_copy”
The script saves the frontmost document
in the native Numbers format in a date_time stamped file.
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox
--=====
Yvan KOENIG (VALLAURIS, France)
2011/08/12
on run
          local docPath, docName, docFolder, fileName, theExt, newName, newPath
          set major_OS to get system attribute "sysv"
Grab infos about the open doc at front *)
          tell application "Numbers"
                    tell document 1
                              set docPath to its path
                              set docName to its name
                    end tell
                    if major_OS ≥ 4208 then save docName (* Required for Lion *)
          end tell
Grab infos about the file from which the doc was open *)
          tell application "System Events" to tell disk item docPath
                    set docFolder to path of container
                    set fileName to name
                    set theExt to name extension
          end tell
Build an unique name for the new document *)
          if theExt is not "" then
                    set newName to (text 1 thru -(2 + (length of theExt)) of fileName) & (do shell script "date +_%Y%m%d_%H%M%S.") & theExt
          else
                    set newName to fileName & (do shell script "date +_%Y%m%d_%H%M%S")
          end if
Create the new file *)
          tell application "System Events"
make new file at end of folder docFolder with properties {name:newName}
          end tell
          set newPath to (docFolder & newName) as alias
Save a copy in the newly created file *)
          tell application "Numbers"
save document docName in newPath
          end tell
end run
--=====
--[/SCRIPT]
--{code}
Yvan KOENIG (VALLAURIS, France) vendredi 19 août 2011 22:18:22
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>

Here is an other one.
Read carefully the explanations given at the very beginning, in French then in English.
With this one you master the time when you save. CAUTION, Autosave is unable to do it's duty when you work on a document open with the script so don't forget to ask the script to save from time to time.
With this dedicated to Numbers script, the most interesting piece of code is the one used to grab the status of the document when we open it to be able to reset it after inserting the items storing the path to folder to save in and the doc shortname.
--(SCRIPT Numbers_without_autosave]
Enregistrer le script en tant qu'application sur le Bureau.
Glisser une icône de document Numbers sur l'icône de l’application
ouvre le document, le duplique, ferme l'original renomme la copie en ajoutant l'information date_heure
crée une table dans une feuille afin d'y stocker le chemin d'accès au dossier source et le nom court du document original.
Travailler sur le document et de temps à autres, cliquer sur l'cône du script application afin d'enregistrer
le document et repartir avec une copie qui n'ayant jamais été enregistré ne sera pas autoenregistré.
Bien entendu, quand vous aurez fini de travailler sur le document il vous faudra l'enregistrer comme autrefois.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
+++++++++
Save the script as an application on the Desktop.
Drop a Numbers doc icon on the application's one, open the document, duplicate it, save the original if it was created from a template,
rename the duplicate inserting a date_time stamp, create a table in a sheet to store the pathname to the source folder and the short name of the original.
After that you may work upon the document. From time to time, click the script's icon to save the document and replace it by a fresh replicate. So this one which was never saved will not be autosaved.
When you have finished to work upon the doc, save it as you did in the past.
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox
--=====
Yvan KOENIG (VALLAURIS, France)
2011/08/22
property permitted : {"com.apple.iWork.Numbers.numbers", "com.apple.iWork.Numbers.sffnumbers"}
property modeles : {"com.apple.iWork.Numbers.template", "com.apple.iWork.Numbers.sfftemplate"}
property boxName : "pathname_shortname_emantrohs_emanhtap"
--=====
on run
          local docName, path_infos, docFolder, nomCourt, docPath, nbd
          my controle_versions()
Grab infos about the frontmost Numbers document *)
          tell application "Numbers"
                    set docName to name of document 1
                    tell document docName
Try to extract the infos stored by the open handler          *)
                              try
                                        tell sheet boxName to tell table boxName
                                                  set docFolder to value of cell "A1"
                                                  set nomCourt to value of cell "B1"
                                        end tell
                              on error
                                        if my parleAnglais() then
                                                  error "The document “" & docName & "”" & return & "wasn’t open with this script !"
                                        else
                                                  error "Le document « " & docName & " »" & return & "n’a pas été ouvert avec ce script !"
                                        end if
                              end try
                    end tell -- document
          end tell -- Numbers
          set docPath to docFolder & docName
          tell application "System Events"
This test was useful during my tests, now it's useless *)
                    if not (exists disk item docPath) then
make new file at end of folder docFolder with properties {name:docName}
                    end if
          end tell -- System Events
          set docPath to docPath as alias
I don't understand why I must apply save - close - open          but without that it fails *)
          tell application "Numbers"
save document docName in docPath
close document docName
open docPath
                    set nbd to count of documents
          end tell
          my selectMenu("Numbers", 3, 9) (* Duplicate ( 9 in Numbers, 10 in Pages )*)
Wait the availability of the duplicate *)
          tell application "Numbers"
                    repeat 100 times
                              if (get count of documents) > nbd then exit repeat
                              delay 0.2
                    end repeat
Now we may close the 'old' document *)
close document docName without saving
          end tell -- Numbers
Build a date_time stamped name for next version *)
          set docName to nomCourt & my build_a_stamp() & ".numbers"
          tell application "Numbers"
                    set name of document 1 to docName
          end tell
end run
--=====
on open (sel)
          local docPath, docFolder, fileName, theExt, typeID, nomCourt, nouveauNomCourt, newPath, oldUnits, docName, nbd
Apply consistency checks *)
          my controle_versions()
          set docPath to sel's item 1 (* Here, docPath is an alias *)
Extract some infos about the original document *)
          tell application "System Events" to tell disk item (docPath as text)
                    set docFolder to path of container
                    set fileName to name
The try block may be useful if an user is fool enough to drag & drop a folder on the scrip’s icon *)
                    try
                              set theExt to name extension
                    on error
                              set theExt to ""
                    end try
                    try
                              set typeID to type identifier
                    on error
                              set typeID to ""
                    end try
          end tell
Check that the dragged item is a Numbers document *)
          if (typeID is not in permitted) and (typeID is not in modeles) then error number -128
Strip the name extension if there is one *)
          if theExt is not "" then
                    set nomCourt to (text 1 thru -(2 + (length of theExt)) of fileName)
          else
                    set nomCourt to fileName
          end if
If the original is a template, we will save the newly created file *)
          if typeID is in modeles then
                    set nouveauNomCourt to nomCourt & my build_a_stamp()
                    set fileName to nouveauNomCourt & ".numbers"
Create a new file *)
                    tell application "System Events"
make new file at end of folder docFolder with properties {name:fileName}
                    end tell
                    set newPath to (docFolder & fileName) as alias
          end if
          tell application "Numbers"
open docPath
                    if typeID is in modeles then
Original is a template so save the new doc once *)
save document 1 in newPath
                              set name of document 1 to fileName
                    end if
                    set docName to name of document 1
                    set nbd to count of documents
          end tell
          my selectMenu("Numbers", 3, 9) (* Duplicate ( 9 in Numbers, 10 in Pages )*)
Wait the availability of the duplicate *)
          tell application "Numbers"
                    repeat 100 times
                              if (get count of documents) > nbd then exit repeat
                              delay 0.2
                    end repeat
Now may close the 'original' document *)
close document docName without saving
          end tell
          set docName to nomCourt & my build_a_stamp() & ".numbers"
          tell application "Numbers"
                    set name of document 1 to docName
                    set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
                    tell document docName
make new sheet with properties {name:boxName}
                              tell sheet boxName
delete table 1
make new table with properties {name:boxName, row count:2, column count:3}
                                        tell table boxName
remove column 1
remove row 1
                                                  set value of cell "A1" to docFolder
                                                  set value of cell "B1" to nomCourt
                                        end tell -- table
                              end tell -- sheet
Reset the entry settings *)
                              if tName is "" then
                                        my selectSheet(dName, sName)
                              else
                                        my selectTable(dName, sName, tName)
                                        if rowNum1 > 0 then
                                                  tell sheet sName to tell table tName
                                                            set selection range to range (name of cell rowNum1 of column colNum1 & ":" & name of cell rowNum2 of column colNum2)
                                                  end tell
                                        end if
                              end if
                    end tell -- document
          end tell -- Numbers
end open
--=====
on build_a_stamp()
          return do shell script "date +_%Y%m%d_%H%M%S"
end build_a_stamp
--=====
on controle_versions()
          local app_Version, sysv
          tell application "Numbers" to set app_Version to version
          set sysv to system attribute "sysv"
          if (app_Version < "2.1") or (sysv < 4208) then error number -128
end controle_versions
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
Enhanced version returning the name of the selected sheet or the name of the selected table if no cell is selected *)
on get_SelParams()
          script myScript
                    property liste_feuilles : {}
                    local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
                    local sheet_size, i, r, s, t_index, sheet_row
                    tell application "Numbers" to tell document 1
                              set d_name to its name
                              set s_name to ""
                              repeat with i from 1 to the count of sheets
                                        tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                                        if maybe is not 0 then
                                                  set s_name to name of sheet i
                                                  exit repeat
                                        end if -- maybe is not 0
                              end repeat
                    end tell -- Numbers…
                    if s_name > "" then
                              tell application "Numbers" to tell document d_name to tell sheet s_name to tell (first table where selection range is not missing value)
                                        tell selection range to set {top_left, bottom_right} to {name of first cell, name of last cell}
                                        set t_name to its name
                                        tell cell top_left to set {row_num1, col_num1} to {address of its row, address of its column}
                                        if top_left is bottom_right then
                                                  set {row_num2, col_num2} to {row_num1, col_num1}
                                        else
                                                  tell cell

Save project created with trial version in Captivate 5.5 with license

I have a project created with Captivate6 trial version. Now I have a license for Adobe Captivate5.5. The content of my project with Captivate6 will expire when the trial period is over and will not be accessible. I cannot open the .cptx file with Captivate5.5. How can I save my work from the trial Captivate6 to the licensed Captivate5.5? This is the last day of my trail version. Please help as soon as possible.

Hello and welcome to the forum,
I'm so sorry, but there is no backwards compatility beteen 5.5 and 6. You cannot copy slides, objects from 6 to 5.5. You can try to export what is available in the Library, some objects you will hopefully be able to reuse in 5.5. But the project will have to be recreated from scratch.
Lilybiri

How do I create files in Captivate 6 and save them in a lower version?

I have Captive 6 at home and at work we are using 5.5.with no plans to upgrade. How do I create or edit in Captivate 6 and still save files so my coleagues can contribute using the software we are given at work?

Only between 6 and 7 this is possible, not with previous versions. And even between 6 and 7 you can have weird things happening. It has nothing to do with being a normal file or a template, I don't know why you tell that?
OP was talking about 5.5 and 6, and there this is NOT possible at all.

Export to iTunes where is save as AIF?

I don't get this I am trying to record a simple voice over. I have a Motu unit and a mic and I finally got the track to record in Garage Band and now I go to try to export the audio file so I can use it with my video editing program and the only option is Export to iTunes?? Am I missing something?
Where are the original recorded audio files located? Can you control what format they are recorded in? Can I just grab those?
I don't use iTunes how do I get a good quality AIF file out of this??
Thanks in advance,
Greg

Exactly (..why they don't bundle projects, events, etc in one package that you're free to move around..).
I have my projects on a disk known as "/Volumes/LaCie Disk". I cannot move it -- I tried. There is no option in the File menu or Preferences. When you import a movie you can specify where the Event files go -- that's it -- FOREVER.
You can actually drag the event directories around, just not the .rcproject files (the files that have my painstaken editing data).
Looking in the .rcproject directory there are several files - some binary - some ascii with compressed data in XML format. In both cases you see "/Volumes/LaCie Disk" hard-coded into the file. I tried editing the "/Volumes/LaCie Disk" entry, but, alas it didn't work. If I want to edit my .rcproject a year from now I will have to do it at a location called "/Volumes/LaCie Disk".
Apple, please, please add a Save As option to iMovie 08 -- soon!

PSE 7...Unable to save edited photos in a version set

I am suddenly unable to save my edited photos in a version set. The edited photo is being saved on the hard drive but is not linked to the previous photo nor is visable in the open catalog. This issue in occuring in only one catalog but not in others. Thanks for any help.

You may be encountering a known bug. To troubleshoot:
1. In the Organizer, select one of the problem photos (the original, not the edited), right-click it, and do Show Properties. What is the full, precise path of the photo, shown to the right of the yellow folder icon at the bottom of the Properties window?
2. Do Help > System Info. What is the precise path given for Catalog Location?

Can Lookout 6.7 open, allow editing, and then save programs written in previous versions of Lookout like 4.2 or 5.1?

I have several control stations provided by a 3rd party that need some tweaks made to them, however if I purchase Lookout, I will receive a much later version than they were originally written in. I do not want to change the OS the stations are using so would like to save the applications in their original version. Is this possible?
Thanks! Barney Rubble

Contact NI directly, they may be able to help.
If not I can get you the Install for Lookout 5.1 relatively easily. It will run in eval and may be enough to get you in to make some changes. I do not have 4.5 or older.
Forshock - Consult.Develop.Solve.

Save Converted Document from Previous Version without Confirmation in CC2014?

Hi Everyone,
Is there a way to save a converted document from a previous version of InDesign with the same name WITHOUT the save confirmation dialog box? By a converted document, I mean that when you open a version from CS6 for example the document tab shows [Converted], and will automatically prompt with a Save Dialog when saving. I've parsed over all Preferences but may have possibly overlooked something.
Thank you for your help!
-TT

If you are using OSX try this AppleScript:
http://www.zenodesign.com/forum/ConvertToCC2014.zip
There's a droplet and script panel version in the zip archive. It copies the chosen folder's ID files older than version 10 into an Archive subfolder then updates the files. Depending on the file size it can take some time—there's a done dialog when it completes. I would test it a few times to make sure it does what you expect.

New version of Reader 11.0.1 does not remember last save as folder like previous version

It is annoying having to navigate to the same location every time a document is saved.
Previous versions have used "sticky" folders so it remembers where to "save as" a file.
Is there a way to make it revert?

It is annoying having to navigate to the same location every time a document is saved.
Previous versions have used "sticky" folders so it remembers where to "save as" a file.
Is there a way to make it revert?

Save as AIF on PC version

Similar Messages

Maybe you are looking for