Save as .avi file settings for television movie

Can anyone tell me what settings should be used to save a
.avi file so that it will open correctly in a program such as
Pinnacle Studio?
We want to make this into a DVD and it keeps getting
distorted no matter what we try.
Thank you

What resolution is your original Flash movie?
- B

Similar Messages

Best settings for PP mov's?

Got a few videos SD 720x486 I need to export from FCP 7 (uncompressed timeline) for use in a Powerpoint - what's best settings for PP? mov, h264, audio at 44 or 48k, what? Should we keep them at full 720 size, probably?
Thanks
K

ON a Mac or a PC?
WMV for the PC but learning how to embed is a function of learning how to use Ppoerpoint, not FCP's tools.
H.264? Dunno, what does the manual for PP say about compatible movie filetypes?
If you are handing these movies off to an experience PP producer, they will be able to give precise specs. If your'e doing this yourself, give yourself some extra time to work out the screwups. We have two wiseguys who insist on doing their own PP instead of letting our PP wonks do the jobs. They have never been able to figure out how to embed or link to movies and they do not understand why we tell them to have the movines in the same folder as the PP files.
bogiesan

Best AVI export settings for a XDCAM EX 1080i60 35VBR FCP timeline

I've editted a couple of XDCAM EX 1080i60 35VBR timelines in Final Cut Pro. The dimensions of the source footage and timeline sequence settings are 1920 x 1080 XDCAM EX 1080i60 35VBR.
They will be used at a large conference center and the client has asked me to delivery HD AVI files.
So far, everytime I export an AVI file from either the FCP timelines, or HD Quicktime XDCAM EX 1080i60 35VBR composites that I've made from the timeline, the AVI file that results is either alot smaller than the 1920 x 1080 quicktime file and/or pixelated to some degree, and not as clean as the HD quicktime.
I have very little experience with AVI and was hoping someone could suggest appropriate export settings. As I said, the client only indicated they want AVI files, and that their equipment can display HD files.
So I'm trying to maintain the quality of the original and editted footage.
I'd like to work with the tools and export options available within FCP7 (FCS3) and quicktime, as opposed to having to purchase some AVI transcoder, but I guess I'd be open to that if I had to otherwise take a huge quality hit.
Thank you in advance for any assistance.

I'd like to work with the tools and export options available within FCP7 (FCS3) and quicktime, as opposed to having to purchase some AVI transcoder
As far as I know there are no tools/export options within FCP7 (FCS3) and/or Quicktime to do what you probably want to do (compressed HD AVI export). But if a fully uncompressed 1920x1080 AVI export is ok for you / your client then you can use Export > Quicktime Conversion, set the Format to AVI and change the Options >> Video >> Settings >> Compression type to "None" ... bear in mind that this will produce some pretty big exports file size wise (about 6-7 GB per minute).
Or instead, you can download and use MPEG Streamclip. Open your HD Quicktime XDCAM EX 1080i60 35VBR composites into MPEG Streamclip and choose File > Export to AVI ... then in the AVI Exporter window you can +choose the codec+ you need and press the "Make AVI" button (leave the settings at default, especially Frame Size which should be "unscaled"). Note that AVI is just a wrapper, not a codec. Make sure you chose an HD capable codec that your client can handle (it's unlikely that they will be able to play back any Apple XDCAM EX variant, or indeed any codec that starts with "Apple").
Or just send them an unscaled H264 test file and see how they get on with that (and you can export H264 from FCP, Compressor, Quicktime and/or MPEG Streamclip). It's scalable (handles any resolution including HD) and is pretty much universally supported delivery codec. I'd expect your client would be happy to accept it if you explain that the format will offer the quality the need.
However you proceed I'd strongly recommend you send the client a few test encodes first to have them confirm that they can indeed read / handle your encodes correctly.
Hope it helps
Andy

Exporting .dv files to supported files types for Windows Movie Maker

I am digitizing all of my friends' family videos with iMovie and I now have them all as Apple .dv files. Unfortunately some of my freinds do not have Macs, so I must convert them. There are many options for converting .dv files to formats that Windows Movie Maker can import, but every combination of wrapper and codec I have tried has either resulted in low quality or results in a size that it is at least double. Because these are family memories I do not want to lose quality compared to the Apple Mac .dv files that I have. On the other hand, I would prefer not to double the file size for the same quality that I had.
What converter do you recommend and what combination of wrapper (mpeg4, avi, mov, etc.) and codec (h264, jpeg, etc.) can convert Mac .dv files into full resolution files for Windows Movie Maker?
What I have tried:
I was advised by Applecare to try DivX converter, but it does not accept .dv files. I have been trying Mpeg Streamclip with the following combinations:
exporting to AVI with DivX Codec seemed low quality
exporting to AVI with H.264 was not readable by Windows Movie Maker
exporting to AVI with Apple Photo JPEG Codec was more than twice the orginal .dv file size
Thanks.

mkl111 wrote:
... There are variants of dv files and .. .
best to my knowledge - no.
.dv is a standard, created by movie-cams. iMovie handles this codec 'natively'.
only allowed differences are PAL and NTSC …
I copied a zillion .dv files without processing/editing directly from the Events folder onto a fat32-formatted HDD.
but even edited movies are compatible: Export using Quicktime and in the drop down DV-STREAM ...
afaik, in Movie Maker you have to choose 'Import file' - done.
sorry, no idea which of the hundred of versions of WMM is in use on the other side of the street

Best Web/Quicktime/AVI file settings.

I'm just getting into Web, Quicktime, and AVI Files/applications.
I understand the why of the format uses... my question is, what are the best settings for low file size and presentable quality, espically over web applications, or file exchange server.
My first project will be 2-3 min long.
Thanks Marv.

when you say you want it to be compatible with QT 6 and 7, what you really mean is that it must be QT 6 compatible (because that's automatically compatible with any higher version).
in Compressor, you'll find a QT 6 compatible preset setting way down in this folder: Apple -> Other Workflows -> Web -> Download -> QuickTime 6 Compatible.
you'll see a bunch of presets in there. oddly there's an MPEG-1 option, but in general you want to use any of the MPEG-4 options. They are labeled as low, med, or high bandwidth.
Mac OS X (10.4.9)

Cant incorporate odd AVI files into pre 7 movie

Dear Pros: Please help!
I recently had to recover some previously deleted camcorder download files, but when I recovered them they seem to have changed and I can't use them anymore. Let me explain: Usually, when I get media from camcorder download files I have an icon showing an actual single frame image from the video tape with a small pre box in the lower right. Now the recovered files have an icon of a generic film strip and a musical note(even tho it shows it is a large AVI file) and when I get media into my Premier it is received not as a video frame but a different icon of an intertwining red and green arrow. And, when I try to incorporate into the timeline I get an error box saying this type of file is not supported or codec required. Can anyone explain and suggest what can be done in simple steps?
Thanks in advance, Tom

Can you tell us about those AVI files? I would use either G-Spot, or MediaInfo for those details.
This ARTICLE will give you background on the AVI "wrapper," and some tips on "peeking inside" that wrapper.
Good luck,
Hunt

What are the best sequence settings for a movie to be put on youtube?

I am making a video that consists of mainly jpegs and audio. The final movie needs to be crisp and fairly high resolution because the pictures have some house plans that need to be easily read.
I have tried the following settings only to get a blurry image result in the end:
Frame Size: 960x720 Aspect Ratio: HD (960x720) (16:9)
Pixel Aspect Ratio: NTSC - CCIR 601 DV 720X480
Editing Timebase: 29.97
Quicktime Video Settings:
Compressor DVCPRO50 - NTSC
Quality: 100%
This seems to me like it should be a crisp enough image result but the end result is very poor. When I use the H.264 Compressor instead of DVCPRO50 - NTSC, the image is much sharper but the faded transitions are sometimes choppy, and you have to render the timeline with each change you make. Please help me find the best overall settings for smooth editing and sharper image.
Thanks,
Caleb

Your settings -- between the Compressor, Pixel Aspect Ratio and Frame Size -- are oil-and-water.
If this is going to YouTube (meaning not going to be viewed on traditional TVs) and it's mainly Photos, try using this:
Frame Size: 1280x720
Aspect Ratio: HDTV 720p
Pixel Aspect Ratio: Square
Editing Timebase: 29.97
Compressor: Motion JPEG A
Quality: 100% (though in a lot of cases, you could drag this down to about 75-80% and quality will not suffer)
Unfortunately, you won't get much (if any) real-time effects. Unless, of course, you're on FCP 6 or later, where you can use a ProRes compressor instead. But with your signature saying 10.4. something, I wasn't sure if it was safe to assume that. The Motion-JPEG setting should work in all versions.

Optimum Settings for Creating .MOV for Web

Hello,
I shot my video footage using a Canon XL-1 with a MiniDV tape. I then loaded this footage into Final Cut Pro (Version 4), running on MAC (Version 9.0), and then completed my editing. Besides creating a final 42-minute version to be shown on television, I would like to break up this 42-minute version into three separate pieces (a 21-minute, an 11-minute, and a 10-minute slice) for Web/Internet delivery.
To do this, I will create three separate .MOV files; however, I would like to know the 'OPTIMUM' configuration Final Cut Pro settings/considerations before creating these .MOVs for optimum audio/video quality when shown on a website. By the way, after I produce these .MOV files, I plan to encode them using FlixPro's ON2 V6 Codec to finally produce Flash 8 .FLV files for uploading to my web server.
Any and all advice regarding optimum Final Cut pro settings/considerations before creating these .MOVs would be aprreciated immensely!

Thank you for your reply. I take it then that current default settings are OK.

Export settings for quicktime movie to use in DVD Studio Pro

The workflow:
I created a movie and did extensive sound adjustments in iMovie and a few video edits, and exported it to a quicktime format:
compression H.264
Quality: High
Frame reordering: yes
Encoding mode: multi-pass
Dimensions: 1280x720
Since then I upgraded to FCS, and tried to create a DVD with DVD SP and import the movie, and I get this error:
Import error:
One or more files failed to import. Common reasons for this are that they do not match the current project's video standard or their file format is not supported.
I'm fairly sure I have matching video standard...and the file format has always been supported before.
I imported the quicktime (.mov) file to FCP and added some edits, recreated the chapter markers, and early on there was a pop-up that said my movie format did not match the project settings, so I checked the "okay" to adjust the video file to match.
When I finished, I exported the file from FCP to a quicktime movie with the "current settings" that have always worked with DVD Studio Pro before, and I'm getting the same error.
I don't know where the problem is. Both the original movie I created in iMovie and the movie I recreated in FCS will import to iDVD. I wanted the better quality production from DVDSP....
I no longer have the iMovie project file. (I thot I was done.) I do have the original footage, but I'm already three days in and hoping to avoid starting over.
I would sure appreciate any help!
Thanks!

2cute2b2smart wrote:
I don't know where the problem is.
compression H.264
Quality: High
Frame reordering: yes
Encoding mode: multi-pass
Dimensions: 1280x720
The specifications you listed are the problem.
I can't comment on iMovie -don't use it personally.
From FCP, you would export a self contained movie using the current Timeline settings (not H.264 ever)
Bring that file into Compressor and apply one of the time based DVD presets that the running time of your movie fits into. This will produce a MPEG 2 video file and an AC3 audio file. Bring both into DVDSP and author.
A DVD video is always standard def 720x480 (NTSC) or 720x576 (PAL).
Converting the output from FCP to H.264 is adding an unneeded compression stage that will compromize quality -because DVD assets are always MPEG 2 / AC3. Even if DVDSP accepts that H.264 file, it gets transcoded again using DVDSP's own compression system.
All of this is covered in the DVDSP user manual. Take the time to read it. DVD authoring is complicated if you just jump in and start poking around, simple if you take the time to understand the basics.

What are the best settings for Quicktime movies on the web?

I've created a movie and exported it from IMovie. One version is 7.3 megs, and loads fairly quickly when I have it on a web page. I used broadband medium settings from IMovie to create it. I also created a file that is 19.3 megs using broadband high settings from IMovie. That file is way too big to load in a reasonable amount of time. Thing is, I can't stretch the 7.3 meg version (or don't know how) to make it any bigger. Is there a way I can make it bigger in the web page? Maybe that's a Dreamweaver question. Thanks.

You would need to add a few lines of code to your Web page and that depends on which html "style" you've used.
For the "object/embed" style code you would change your dimensions from those found in the source file to those you want to use in your page. Then add scale="tofit" in the embed tag code and param name="scale" value="tofit" in the object tag.
Don't forget to add 16 pixels to the height to show the movie controller (if used).

Settings for 101 movement while accepting the service entry sheet

Hi All,
Please let me know the settings required to do a 101 movement in the background when a service entry sheet is getting accepted using ML81N.
Regards,
Ashwin

Hi
The PO is always account assigned for service PO.
Hence when you accept service entery sheet the system do GR for account assigned PO i.e.
Debit - KBX for account assignment
Credit _ WRX GR/IR account
You can check it in OMJJ under update control from left pan for movement type 101 and GR for account assigned

FILE Settings for Archiving

Hi All,
I'm having some trouble with archiving. Currently I am trying to archive production orders. I have gone through the steps of finding TECO orders, setting their deletion flags and indicators with PPARCHP1, and have done a test run with PPARCHA1 which is successful. However, when I try to do a production run, I recieve an error. Also, when I try SARA and object PP_ORDER, I get an error in the log saying "Operating system message: No such file or directory".
I believe this is a problem with the settings in FILE. I have made a logical path ARCHIVE_PROD and tried using a physical path to both my desktop, and another drive, such as I:\ARCHIVE\<FILENAME>. The logical file name ARCHIVE_PROD1 with data format WK1, and refers to Logical path ARCHIVE_PROD. I'm not sure what I should put for the Physical file.
Our BASIS admin has never worked with FILE either. Could someone help me out on how to configure the logical file path and name correctly?
Thanks,
J

Hi J,
Try this:
Logical Path- 'ARCHIVE_PROD'
Physical Path- 'I:\ARCHIVE\<FILENAME>'
( i assume you are using Windows OS; choose syntax group as windows)
Logical File Name: 'ARCH_PROD_LFN'
Physical File Name: '<SYSID><CLIENT>_<PARAM_3>_<DATE>_<TIME>_<PARAM_2>'
(enter the pysical file name as it is, without the quotes. at run time SYSID will be replaced by system id, CLIENT by client number, PARAM_3 by archive object id, DATE by date, TIME by time and PARAM_2 by a counter value)
also take care that the archive folder I:\ARCHIVE\ in this case has proper permissions so that the sidadm user can access this folder for writing.
all the best,
Naveen

Clean install - can I save my old internet settings for wireless router

I am upgrading to Leopard with a clean install. My only concern is that my sister got my computer hooked up to our wireless router ages ago and I'm afriad I won't be able to get back on wireless afterwards.
Is there a way to backup this information, these settings, to my external drive to reinstall once I've done the reinstall?
Thanks!

sarah steegar wrote:
uhhh, I think the 2nd thing you said...
We bought a wireless router to work with our pre-existing internet service. She had to put in some disk and go to some website with a bunch of numbers as an "address" and type in some stuff. Something about WEP keys and such (that I obviously don't understand enough to remember clearly). It was quite a hassle is mostly what I remember.
Yes, it can be. The web page is probably the configuration page for the router. The disk suggests she might have had to install some software to get it set up. You would need to reinstall that, I think. It also sounds as if she configured the router from your machine. Although the router is now configured, you don't want to lose the ability to re-configure it if necessary.
I'm going to suggest that you write down as much configuration information as you can.
Are you in a position to make a bootable backup - to clone your current system? You need an external drive big enough to house your system and which is suitable for use as a boot volume. I would strongly recommend this before upgrading in any case. If anything goes wrong, you can always boot from your backup until you sort the problem out. I don't know what sort of backups you keep - you mentioned an external drive but I gather you are backing up just selected files to that.
What kind of router do you have? Are any other computers sharing the connexion to the internet?
- cfr

Settings for Television

What is the best preset to use in Premier 5.5 for converting TV commercials in HD for broadcast? Is it H.264 HDTV? Also, if I am editing using various files such as RED, DVCPRO and other HD files which initial project settings should I use? This is with the end use to be for broadcast HD TV commercials.

Your broadcaster will have a published spec and requirements sheet with all the info required for deliverables.
Broadcaster specs vary from one to the other.
As Jim said match your footage to your edit sequence.....to which I would add..the lowest common denominator ( rez) of your source footages.

Outlook PRF file settings for Exchange 2013 environment

Hi Team,
Client - Outlook 2007
Existing environment - exchange 2007
New environment - exchange 2013
Recently migration of exchange 2007 to exchange 2013 happened in our environment subsequently some users mailboxes are moved from exchange 2007 to exchange 2013.
In the Exchange 2007 environment, users outlook profile settings are applied via importing the below prf file and it works fine.
;Automatically generated PRF file from the Microsoft Office Customization and Installation Wizard
; Section 1 - Profile Defaults
[General]
Custom=1
ProfileName=outlook
DefaultProfile=Yes
OverwriteProfile=Yes
ModifyDefaultProfileIfPresent=false
; Section 2 - Services in Profile
[Service List]
ServiceX=Microsoft Outlook Client
ServiceEGS=Exchange Global Section
Service1=Microsoft Exchange Server
ServiceEGS=Exchange Global Section
; Section 3 - List of internet accounts
[Internet Account List]
; Section 4 - Default values for each service.
[ServiceX]
CachedExchangeMode=0x00000002
CachedExchangeSlowDetect=true
[ServiceEGS]
CachedExchangeConfigFlags=0x00000900
MailboxName=%UserName%
HomeServer=mailboxserver.exchange.xxx.xx
[Service1]
OverwriteExistingService=No
UniqueService=Yes
MailboxName=%UserName%
HomeServer=mailboxserver.exchange.xxxx.xa
AccountName=Microsoft Exchange Server
; Section 5 - Values for each internet account.
; Section 6 - Mapping for profile properties
[Microsoft Exchange Server]
ServiceName=MSEMS
MDBGUID=5494A1C0297F101BA58708002B2A2517
MailboxName=PT_STRING8,0x6607
HomeServer=PT_STRING8,0x6608
OfflineAddressBookPath=PT_STRING8,0x660E
OfflineFolderPathAndFilename=PT_STRING8,0x6610
[Exchange Global Section]
SectionGUID=13dbb0c8aa05101a9bb000aa002fc45a
MailboxName=PT_STRING8,0x6607
HomeServer=PT_STRING8,0x6608
RPCoverHTTPflags=PT_LONG,0x6623
RPCProxyServer=PT_UNICODE,0x6622
RPCProxyPrincipalName=PT_UNICODE,0x6625
RPCProxyAuthScheme=PT_LONG,0x6627
CachedExchangeConfigFlags=PT_LONG,0x6629
[Microsoft Mail]
ServiceName=MSFS
ServerPath=PT_STRING8,0x6600
Mailbox=PT_STRING8,0x6601
Password=PT_STRING8,0x67f0
RememberPassword=PT_BOOLEAN,0x6606
ConnectionType=PT_LONG,0x6603
UseSessionLog=PT_BOOLEAN,0x6604
SessionLogPath=PT_STRING8,0x6605
EnableUpload=PT_BOOLEAN,0x6620
EnableDownload=PT_BOOLEAN,0x6621
UploadMask=PT_LONG,0x6622
NetBiosNotification=PT_BOOLEAN,0x6623
NewMailPollInterval=PT_STRING8,0x6624
DisplayGalOnly=PT_BOOLEAN,0x6625
UseHeadersOnLAN=PT_BOOLEAN,0x6630
UseLocalAdressBookOnLAN=PT_BOOLEAN,0x6631
UseExternalToHelpDeliverOnLAN=PT_BOOLEAN,0x6632
UseHeadersOnRAS=PT_BOOLEAN,0x6640
UseLocalAdressBookOnRAS=PT_BOOLEAN,0x6641
UseExternalToHelpDeliverOnRAS=PT_BOOLEAN,0x6639
ConnectOnStartup=PT_BOOLEAN,0x6642
DisconnectAfterRetrieveHeaders=PT_BOOLEAN,0x6643
DisconnectAfterRetrieveMail=PT_BOOLEAN,0x6644
DisconnectOnExit=PT_BOOLEAN,0x6645
DefaultDialupConnectionName=PT_STRING8,0x6646
DialupRetryCount=PT_STRING8,0x6648
DialupRetryDelay=PT_STRING8,0x6649
[Personal Folders]
ServiceName=MSPST MS
Name=PT_STRING8,0x3001
PathAndFilenameToPersonalFolders=PT_STRING8,0x6700
RememberPassword=PT_BOOLEAN,0x6701
EncryptionType=PT_LONG,0x6702
Password=PT_STRING8,0x6703
[Unicode Personal Folders]
ServiceName=MSUPST MS
Name=PT_UNICODE,0x3001
PathAndFilenameToPersonalFolders=PT_STRING8,0x6700
RememberPassword=PT_BOOLEAN,0x6701
EncryptionType=PT_LONG,0x6702
Password=PT_STRING8,0x6703
[Outlook Address Book]
ServiceName=CONTAB
[LDAP Directory]
ServiceName=EMABLT
ServerName=PT_STRING8,0x6600
UserName=PT_STRING8,0x6602
UseSSL=PT_BOOLEAN,0x6613
UseSPA=PT_BOOLEAN,0x6615
EnableBrowsing=PT_BOOLEAN,0x6622
DisplayName=PT_STRING8,0x3001
ConnectionPort=PT_STRING8,0x6601
SearchTimeout=PT_STRING8,0x6607
MaxEntriesReturned=PT_STRING8,0x6608
SearchBase=PT_STRING8,0x6603
CheckNames=PT_STRING8,0x6624
DefaultSearch=PT_LONG,0x6623
[Microsoft Outlook Client]
SectionGUID=0a0d020000000000c000000000000046
FormDirectoryPage=PT_STRING8,0x0270
WebServicesLocation=PT_STRING8,0x0271
ComposeWithWebServices=PT_BOOLEAN,0x0272
PromptWhenUsingWebServices=PT_BOOLEAN,0x0273
OpenWithWebServices=PT_BOOLEAN,0x0274
CachedExchangeMode=PT_LONG,0x041f
CachedExchangeSlowDetect=PT_BOOLEAN,0x0420
[Personal Address Book]
ServiceName=MSPST AB
NameOfPAB=PT_STRING8,0x001e3001
PathAndFilename=PT_STRING8,0x001e6600
ShowNamesBy=PT_LONG,0x00036601
; Section 7 - Mapping for internet account properties. DO NOT MODIFY.
[I_Mail]
AccountType=POP3
;--- POP3 Account Settings ---
AccountName=PT_UNICODE,0x0002
DisplayName=PT_UNICODE,0x000B
EmailAddress=PT_UNICODE,0x000C
;--- POP3 Account Settings ---
POP3Server=PT_UNICODE,0x0100
POP3UserName=PT_UNICODE,0x0101
POP3UseSPA=PT_LONG,0x0108
Organization=PT_UNICODE,0x0107
ReplyEmailAddress=PT_UNICODE,0x0103
POP3Port=PT_LONG,0x0104
POP3UseSSL=PT_LONG,0x0105
; --- SMTP Account Settings ---
SMTPServer=PT_UNICODE,0x0200
SMTPUseAuth=PT_LONG,0x0203
SMTPAuthMethod=PT_LONG,0x0208
SMTPUserName=PT_UNICODE,0x0204
SMTPUseSPA=PT_LONG,0x0207
ConnectionType=PT_LONG,0x000F
ConnectionOID=PT_UNICODE,0x0010
SMTPPort=PT_LONG,0x0201
SMTPSecureConnection=PT_LONG,0x020A
ServerTimeOut=PT_LONG,0x0209
LeaveOnServer=PT_LONG,0x1000
[IMAP_I_Mail]
AccountType=IMAP
;--- IMAP Account Settings ---
AccountName=PT_UNICODE,0x0002
DisplayName=PT_UNICODE,0x000B
EmailAddress=PT_UNICODE,0x000C
;--- IMAP Account Settings ---
IMAPServer=PT_UNICODE,0x0100
IMAPUserName=PT_UNICODE,0x0101
IMAPUseSPA=PT_LONG,0x0108
Organization=PT_UNICODE,0x0107
ReplyEmailAddress=PT_UNICODE,0x0103
IMAPPort=PT_LONG,0x0104
IMAPUseSSL=PT_LONG,0x0105
; --- SMTP Account Settings ---
SMTPServer=PT_UNICODE,0x0200
SMTPUseAuth=PT_LONG,0x0203
SMTPAuthMethod=PT_LONG,0x0208
SMTPUserName=PT_UNICODE,0x0204
SMTPUseSPA=PT_LONG,0x0207
ConnectionType=PT_LONG,0x000F
ConnectionOID=PT_UNICODE,0x0010
SMTPPort=PT_LONG,0x0201
SMTPSecureConnection=PT_LONG,0x020A
ServerTimeOut=PT_LONG,0x0209
CheckNewImap=PT_LONG,0x1100
RootFolder=PT_UNICODE,0x1101
[INET_HTTP]
AccountType=HOTMAIL
Account=PT_UNICODE,0x0002
HttpServer=PT_UNICODE,0x0100
UserName=PT_UNICODE,0x0101
Organization=PT_UNICODE,0x0107
UseSPA=PT_LONG,0x0108
TimeOut=PT_LONG,0x0209
Reply=PT_UNICODE,0x0103
EmailAddress=PT_UNICODE,0x000C
FullName=PT_UNICODE,0x000B
Connection Type=PT_LONG,0x000F
ConnectOID=PT_UNICODE,0x0010
I have changed the home server in [ServiceEGS] and [Service1] with the CAS Array VIP configured with the DNS name
autodiscoverservices.exchange.xxxx.xx but it is not working and getting "Exchange server unavailable" error. Some one have any idea how to
configure the user outlook profile via a prf file which works with exchange server 2013 autodiscover services. Is there any more settings to be applied to the PRF file to make it work.
[ServiceEGS]
CachedExchangeConfigFlags=0x00000900
MailboxName=%UserName%
HomeServer=autodiscoverservices.exchange.xxxx.xx
[Service1]
OverwriteExistingService=No
UniqueService=Yes
MailboxName=%UserName%
HomeServer=autodiscoverservices.exchange.xxxx.xx
AccountName=Microsoft Exchange Server

May I ask why you changed the home server to autodiscoverservices.exchange.xxxx.xx?
Basically, we set it to Microsoft Exchange server address.
Flynn

Save as .avi file settings for television movie

Similar Messages

Maybe you are looking for