Save as disc image to blank DVD

If I was to save a disc image on a blank DVD, can I still use it the disc image for the future to burn a new DVD for friends and family. I also like to use the disc image as a backup. Will this work for me.

To complement Gerfried's answer look at http://docs.info.apple.com/article.html?artnum=42724

Similar Messages

Error-29, Cannot burn a DVD or save a disc image from within FCPX using Mountain Lion

Really stumped on this one.
Running Mountain Lion, freshly downloaded version of FCPX, on a 2009 MacPro with 16 G RAM.
Trying to share a 4 minute movie I edited.
- No problem exporting as a quicktime move...worked fine
- Big problem trying to either burn a DVD, save a disc image, or export to an Apple device.
The progress bar gets about 90% complete, and then it stops and a message window comes up that says:
There was an error burning your disc. The operation couldn't be completed. (DSPPublishing error-29)
Thoughts?

From Crash Analyzer:
DSPPublishing error -29 (Final Cut Pro X)
This error can occur when burning a disc if your menu has incompatible assets.
Suggested Actions
If your menu has a background image, make sure the image is not too large. Try reducing the size of the image and saving it as a JPEG or PNG.
Report generated by Crash Analyzer in Pro Maintenance Tools

Can't do a save as disc image

I have iMovie '09 (8.0.6) iDVD 7.1.2 and am having a problem saving a large file (3.9gb) as a disc image. This file was made in iMovie with chapters and I "Shared to Media Browser" (I am using the .m4v file).I did a short (2 min.) test file in iDVD to make sure I could get the chapters to work and save a disc image before doing the large project. The short test project successfully saved a disc image and I was able to see it with the DVD player. When I try to save as a disc image the time remaining is 37 min (I have a main menu and 2 sub menus) and the process quits after "rendering menu video asset". It is like there is no movie file inserted. Can anyone tell me what I am doing wrong, or not doing right. Thanks for any help you can provide.

The file is .m4v and 71 min long.
• .m4v is also a container - Please open it with QuickTime Player and open Inspector and read in what codec it is.
• 71 min long - iDVD doesn't care about Gbs at all only time and this is Movie time AND MENU Time (as this can take 15 minutes and even more from the project) AND the various Encoding Qualities has different acceptance in time as:
iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
The menu (theme?) is called scrapbook and there is audio and no photos.
• I use an as simple Menu possibly and no animation or Audio on this e.g. Brushed Metal from old themes
Also there is over 600 GB free.
• Great - my minimum is 25Gb free space - AND it is ONLY the Start-Up (Mac OS) hard disk that counts as neither Mac OS or iDVD can address any other for their temp. files.
I sat and watched it save to disc image again, and it did work;
• If You got a DiskImage that works OK then You can use Disk Util tool to burn it onto a DVD
I captured the movie from a VHS tape; I'm converting old home movies. By the end of the tape the audio is not in sync with the video.
• here You do as in so many Q: - anticipate that I/We are Magic in a way or two. You have to describe from VHS/VCR - step by step how Your material ended up in What Video-editor ?
Use of A/D-box - brand and type
Use of DVD-Recorder - brand and type AND IN WHAT Codec material is burned to DVD
Use of iMovie HD6 (very very good for VHS to DVD - near to ZERO loss in quality)
Use of iMovie08 to 11 - Not the choice of me as You lose every second line in the picture and it can not deliver full interlaced video over to iDVD any way known to me.
Use of FinalCut - and project set up as HOW ?
AND - way from this to iDVD - I NEVER use "Share to iDVD" as result will Suffer.
As You see - there are lot's of info needed to be able to be of help.
I use a A/D-Box (Canopus/Grass Valley ADVC-300) as this has two Major functions not found on cheaper solutions
• Repairs broken TimeCode
a. No Baby-sitting during Capture
b. Audio keep in Full Sync.
• Program added that enhance picture quality during Import/Capture.
I'm not sure how to fix that other than to capture in smaller segments and link them together in iMovie. I have already captured all the segments and am now in the process of creating the movie file to use in iDVD.
• Might work but way to tedious for me.
Yours Bengt W

IDVD unexpectedly quits after clicking "Save as Disc Image"

I want to author and burn a DVD, but my iBook doesn't have a DVD-burner.
Unfortunately iDVD 5 (or 5.0.1 build 26) quits unexpectedly after I click "Save as Disc Image". The system offers me to send a report to Apple which I have done a dozen of times.
The error report looks like this: http://lepo.it.da.ut.ee/~aloola/idvdunexpectedlyquits2.html
My iBook came with Panther and iDVD installed. Since I did not need it initially I deleted it to save disk space. A few weeks ago I upgraded to Tiger. A few days ago I needed to author a DVD. I reinstalled iMovie and iDVD from my Panther install discs (the upgrade to Tiger DVD does not contain them). iMovie seems to work just fine. I captured the video (about 23minutes) from camera and after adding chapter marks launched an iDVD project from iMovie. The authoring worked fine as well. Up to the point where I need to save my dvdproject as disc image. iDVD just quits.
So I tried reinstalling it, changing preferences, creating a project with a small .mov file (25MB), repairing permissions, using using the "'Pfurz' and 'Hurz'" files etc. Nothing seems to make it work. I have 15GB of free space on my hard drive and it is very hard for me to free some more. Anyway space shouldn't be an issue, if I try to save a dvdproject that only contains a short (2:30) movie trailer. There should be plenty of room for rendering and saving this small disc image.
I would really appreciate it if anyone could give me some advice what to try next. I am out of ideas and frustrated about having bought a program with my iBook, that is virtually useless without this "Save as Disc Image" feature working.
Is there a direct way to contact Apple support by email to notify them about this issue and receive official feedback whether it will be repaired or if my computer perhaps need some "repairing"?

aloola,
Welcome to the iDVD forum!
after adding chapter marks
Make sure your chapter markers conform to these rules:
http://dvd.kentidwell.com/?page_id=53
changing preferences....repairing permissions
I know you've done it before, but it's a good idea to delete the iDVD plist file anytime iDVD unexpectedly quits, so do it again.
15GB of free space
In your case (only 23 minutes of movie) I'd have to agree that 15GB should be enough. But do everything you can to get more space anyway.
Sometimes movies themselves have some glitch in them that is causing iDVD to crash. Make another short dummy iMovie (just use some Ken Burns clips) and see if you can "Save as Disk Image" Also check to make sure there isn't "extra" audio that extends beyond the end of the video in iMovie, as this has been known to cause problems.
Try creating a new user and see if that user can "Save as Disk Image"
Is there a direct way to contact Apple support by email
No you call Applecare (by phone) if your Mac is still eligible.
http://www.apple.com/contact/phone_contacts.html
John B.

What is "Save as Disc Image"

What is this used for? I am having problems burning in iDVD. The computer freezes toward the end of encoding the video and I have read to "Save as Disc Image" first. Thanks
Also, how do I tell if I camcorder is 14-bit or 16-bit audio?
Thanks

Save to Disk simply allows you to make a DVD without burning it to an actual disk, but a disk image. You can then open it using DiskOpener and play it in DVD Player and test to see it works. Also you can use it as an archive.
I personally use this if I have any photo assets, as I have had issues and test the DVD this way before burning.
The freeze at the end of the burn can be a natural affair. It depends on your computer speed etc. Sometimes it looks like it has frze, but looking in activity monitor shows it is still working. It can encode audio in this state, etc. The best thing to do is to start a burn before you go to bed. Leave the computer running and don't have any other applications open. OK

Save as Disc Image option or technique for DVDSP?

one thing about iDVD I miss since beginning to learn DVDSP is its "Save As Disc Image" feature.
I don't see such a command, menu item or mention of anything like this in the manual.
Build seems to come close by producing a virtual DVD, but I don't see a path to enable me to use that virtual DVD to then produce actual physical DVDs.
Can someone please shed light on this for me?
thank you!
r

At the bottom of the Build and Format dialog, in the section marked Destination, you will see a button labelled Output Device. It will normally show your DVD burner. Click it and change to Hard Drive.
The Output Format button will jump to the .img (Disk Image) setting.

Save as disc image help

I did a save as disc image to my desktop. Can I burn a dvd from a disc image and still get the same quality, as if I was to just burn without a disc image. I burn best quality. If I could burn from disc image how do i do.

The answer is Yes, the disc image will be the exact same quality that you would get if you had just burned it directly from iDVD without a disc image.
You would burn this disc image from Disk Utility. This is inside the /Applications/Utilities directory.
First, you'd drag the disc image from Finder into the side window of Disk Utility, and then select it, and hit the "Burn" button on top of the window.
Brian

Save As Disc Image

I made a movie using iMovie5 and was unable to burn possibly there was a software glitch with iDVD5.
So I bought iLife6 and uploaded iMovie6 and iDVD6 only.
My movie's still on the hard drive and I'd like to proceed with iDVD6. I've read through several postings on these boards and know that I should Save As Disc Image before attempting a burn.
Three questions:
1. When I open iDVD6 one of the themes appears with an annoying ragtime music loop. Maybe I'll use the themes in the future, but right now I'd like to dispense with them. How can I turn the themes and the music loop off?
2. Using iDVD6 I created a new project for my existing movie. I clicked the Media button and noticed that my movie project is visible in the lower pane under Movies. That is as I expected. I played the project and all appears well. I detected no hitches. I then dragged and dropped the project into the Map pane, that is, into a box that has these words "Drag content here to automatically play when the disc is inserted." Question: Am I taking the right steps?
3. I then clicked iDVD>File>Save As Disc Image and got a drop down box saying "There were warnings during content validation. It is recommended to fix these problems before burning the project." What does that mean in plain English? There were no further indications as to the nature of the problems, so I don't know where they're located or what to fix. How do I proceed?
using the
ibook g4 Mac OS X (10.4.3)

1. Select an Old Theme that doesn't have music and animation.
2. Yes. If you want it to loop endlessly, click on that file, go to Advanced/Loop.
3. You probably selected a theme with drop zones that you haven't filled. An image should encode OK if that's the case. It did for me when I didn't want to fill those DZs.
iDVD 6 Getting Started
Apple's iMovie Learning Site
Apple's iDVD Learning Site
General Learning Center
Ken Stone: Authoring in iDVD 6
My favorite, by far:
iMovie HD & iDVD 6: The Missing Manual
You can download Chapter four: Camcorder Meets Mac.
iPhoto 6: The Missing Manual

Movie clips in iDVD won't burn to disc image or a DVD

I created an iDVD project with a slide show created in iPhoto and some movie clips I took with a digital camera that were also in iPhoto. It works great in iDVD preview. When I burn a disc image or a DVD, the movie clips don't play while the slideshow is fine. There is also the clue in the menu of the project (only on the disc image or DVD, not the iDVD preview) that the printing of the names of the movie clips is clearly lighter than the name of the slideshow. During the burning to disc or DVD, one can see the movie clips supposedly being encoded and no error messages occur. This is a birthday present. Help, please.

It's become a moot point. It turns out that while I could navigate with the mouse with respect to the slide show (on both the disc image and the DVD I burned), I had to use the arrows and enter key to navigate and activate the movie clips. Once I figured out to use the arrow keys/enter key rather than the mouse, everything worked okay. Thanks for trying to help me!

No audio on disc image or on DVDs played in DVD player

Help, I'm stuck.
I have made several movies in iDVD and burned them successfully. They always played with no problem. Now I am trying to play them in the DVD player and there is no audio. There is also no audio when I make a disc image. And there is also no audio when I try to copy on of my movies back onto the disc utility. I am also not getting audio from commercial DVDs in the DVD player. All of these DVDs still work fine in my regular DVD player hooked to the tv.
I have version 6.0.4
Thanks in advance!

Hi
Most common origin is .mp3 .avi or other strange audio format - or -
imported audio from iTunes.
Medicine: Copy out as audio .aiff then use this in the movie then to iDVD.
If the DiskImage doesn't play OK - don't waste to burn DVD discs from it.
*OTHER THINGS*
Not knowing the origin to Your problem - General approach when in trouble is as follows:
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
• Program miss-match: iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK - DON’T work under Leopard
• Program miss-match: iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match: iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
iDVD pref file resides: Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named: com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
Last resort:
from Craig: Solved the problem!! Finally!! I deleted every iDVD application and folder from my boot drive, emptied the trash and then installed iDVD 08 using the customize option and I am up and running.
Yours Bengt W

Cannot save as disc image, nothing happens

I am using iDVD 6.0.3 on my Intel Mac Mini. I have 37gb free. I imported the move from my camera into iMovie HD 6.0.3. Then I shared it into iDVD. Now I am trying to save the image to disc. When I do that, the little burning icon pops up for about 5-10 seconds and then goes back to grey and nothing happens. I am not able to burn to dvd because it errors everytime. I have saved a image to disc once before about a week ago but now I cannot with this new project. Any thoughts?

read these please:
http://docs.info.apple.com/article.html?artnum=93006
http://docs.info.apple.com/article.html?artnum=164927
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/21.html
http://docs.info.apple.com/article.html?artnum=61636
I'll check back with you later since I'm also the chief cook and bottle washer around here.

Save an unencoded iDVD disc image to encode/burn with Toast?

Hi:
I'm geting jittery image on playback (only in certain scenes) when I use iDVD to encode my disc. If I use Toast to encode and burn, there's no problem, using the same blanks and burner. I saw a post here from someone who said you can save a disc image from iDVD, but then have Toast encode it and burn it; in the help files it always says iDVD encodes its disc images. Any ideas, or any other suggestions as to the jittery playback on a few scenes?

It could be the DVD media you're using or player, etc. If you create a disk image and use DVD Player software to view it, that should be pretty much what to expect on DVD-R playing in a good quality DVD player.
Read Beverly's comments here:
http://discussions.info.apple.com/webx?128@@.68b68f78
File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Disk Utility to burn the DVD.
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (not the .img, the one below) in the left-hand window. Click the Burn icon. Your SuperDrive tray will open. Insert a recordable DVD. (DVD-R preferred by me.) Click the Close button. Wait. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and Tiger.
b Also, you can use DVD Player to play the virtual disk to check your iDVD 5 project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

Making Playable DVD From Disc Image

A friend of mine has an iDVD project but his mac cannot burn dvds. So he gave me the file as a disc image. I dragged and dropped the disc image to the dvd and hit burn. It does not play as a dvd in a player or in frontrow on my mac. When I double click on it the disc image is on the dvd. Did I make a data dvd instead? How do I make a playable dvd from a disc image?
Also, is going the disc image route the easiest way to transfer an iMovie or iDVD project to another mac. I did it this way because my mac does not have some of the music or photos on it that are linked to the project file. In Garage Band you can save as archive when transferring a file to another mac and it saves all the loops, etc in the file. There must be something similar in iDVD.
Thanks in advance for any help.
Paul

So he gave me the file as a disc image. I dragged and dropped the disc image to the dvd and hit burn.
Paul,
Video DVDs are written in the UDF format. That's why you must use Apple's Disk Utility to burn a disk image to writable media correctly.
In burning from the Finder, you have created a data DVD in Mac OS Extended format that will NOT play in set-top DVD players (as you have found out).
F Shippey

Problems burning DVD from iDVD disc image

I'm burning a disc image onto a DVD using Toast and can't seem to get the disc to automatically start or be read by either my home DVD player or my Powerbook G4 (through DVD player). I'm a little unclear if I burn the .img folder onto the DVD, the mounted drive containing the AUDIO_TS and VIDEO_TS files, or the AUDIO_TS, VIDEO_TS files themselves. I've tried all of these and none have worked, which made me think that it was something wrong with my DVDproj file from whence the disc image was made.
Do I have to have something in the box labeled "Drag content here to automatically play when disc is inserted" in teh MapView? I'd prefer it to just bring up the DVD menu.
Thanks!

Pre edit:
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

How to convert MP4 movie to dvd burn ready disc image?

I have a 15 minute MP4 movie (640x480, non-copy protected) that I'd like to save as a dvd burn-ready disc image. (This was a photo slideshow that a friend made into a movie on OneTrue Media. I don't want to add anything else to it, no chapters, additional files etc -- just save as a disc image that can be posted on my idisk public site for a few friends to download and burn to dvd if they wish). How can I do this the easiest way with iDVD?

Welcome to the forums.
You're almost there. Pull the video into iDVD (mp4 isn't the best format for DVD conversion but it should work) and use the Save As Disc Image command to create your image file (set preferences to Best Performance first).
John

Save as disc image to blank DVD

Similar Messages

Maybe you are looking for