Save as error in Elements

why am i getting an error "Could not save a copy as “DSC_0261.jpg” because write access was not granted."? how do i change the write access?

Where are you saving to? And what operating system?

Similar Messages

"No Disk" Error (premiere elements 11)

I have successfully installed Adobe Premiere Elements 11 on my PC:
     Dell XPS 8300
     Intel Core i7-2600 Quad Core (3.4 GHz, 8MB Cache)
     • 1GB Radeon HD 6450 Graphics
     • 16GB DDR3 1333 RAM
     • 1TB 7,200RPM Hard Drive (2 x 500GB RAID 0)
     • Windows 7 Home Premium 64-Bit
When I open the application and click "New Project" I get the following error message:
AdobePremiereElements.exe - No Disk
There is no disk in the drive. Please insert a disk into drive
     \Devices\harddisk2\DR3
I can "cancel", "try again", or "continue". The only thing that works is to hit "cancel" (several times). Premiere Elements will then open, but the error message will keep recurring.   Adobe Support (Chat) has not been much help.
Anyone else come across this? This seems to be a common error in earlier versions (version 9), but I can't seem to find any good solution to it.   HELP!!!!
UPDATE:   Just as an FYI..while it's possible (but doubtful) there is preloaded software interfering, there is no other software (or viruses) installed on this computer.
Message was edited by: [email protected]

Boomps, I installed from here and it worked fine:     http://helpx.adobe.com/premiere-elements/kb/installing-smartsound.html There are even step-by-step instructions. Good luck.
Date: Mon, 7 Jan 2013 04:46:21 -0700
From: [email protected]
To: [email protected]
Subject: "No Disk" Error (premiere elements 11)
    Re: "No Disk" Error (premiere elements 11)
    created by BoompsXXX in Premiere Elements - View the full discussion
Not an answer!! I am new to this. I get the same error message and from what I can gather reading the traffic, I have to reinstall Smart sound. Can anyone help a simpleton. I searched the DVD for all files referencing Smart sount, there is plenty. I don't really understand how I reinstall and what??Any help would be great!!ThanksTara
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4973936#4973936
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4973936#4973936
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4973936#4973936. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

XML Parsing Error: no element found Location:Line Number 1, Column 1:

Hi,
i have a servlet code in which i am using bouncy castle encryption algorithm , if i tried to run that servlet on embeded weblogic server than my servlet works fine without error.
but if i deploy same Servlet code on SOA domain console than i get following error.
XML Parsing Error: no element found
Location: http://localhost:7001/Encryption-PGPEncrypt-context-root/pgpservlet
Line Number 1, Column 1:
Please help me friends...

Hi Chandra,
Based on my research, the error message is only generated by FireFox when the render page is blank in Internet. For some reason, .NET generates a response type of "application/xml" when it creates an empty page. Firefox parses the file as XML and finding
no root element, spits out the error message.
Also, based on your description, the other sites are opened correctly, the issue only happened in Central Administration(CA). This means the SharePoint services are working fine.
Since this issue only occurred in the CA, it might be due the application pool for the CA is corrupted. Please try to restart the application pool for the CA to resove the issue:
1. Open Internet Information Service(IIS)
2. List the application pools
3. Select the application pool used for the CA
4. Stop it, and then start it again.
Note, if the application pool is running in Classic mode, please change it to be Integrated mode.
Additionally, I found a similar thread, which may help you too:
http://social.msdn.microsoft.com/Forums/en/sharepoint2010general/thread/824d7dda-db03-452b-99c4-531c5c576396
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

XML Parsing Error: no element found Line Number 1, Column 1:

Hi All,
I have deployed EAR on my standalone server using JDEV 11.1.1.6.0. I am able to get the WSRP portlet producer page on
http://<server>:7001/contextRoot. But when i try to click on any of the WSDL URL it gives me "XML Parsing Error: no element found Line Number 1, Column 1:"
and from IE it gives me: XML document must have a top level element. Error processing resource
there can be a issue with the WSRPContainer.jar file. So i have remove it from my deployment profile, EAR and lib/classpath files.
Can you please suggest a workaround.
Regards,
ND
Edited by: ND on Dec 4, 2012 9:57 PM

Hi All,
this error normally comes when the WLS domain is not not properly created. if you get some exception for ./provesecurity.sh file while creating the domain, then the XML error comes.
I did not went into the depth but figured out a workaround: restart the VM/hosted box and then create the domain, remember to use diff port name while creating it from the domain creation script.
Regards,
ND

XML Parsing Error: no element found In BI Publisher

Hi Gurus,
I tried to get XML output for a Data Model which was based on SQL queries.
But I got the following error in Firefox
XML Parsing Error: no element found
Location: http://localhost:9704/xmlpserver/servlet/xdo
Line Number 4, Column 1:
In IE I got an other error:
There is no end tag for DATA_SET
Any ideas?
Many thanks
Laszlo

Hi,
I use 11g.
I tried to create element link when I got this error.
Now I am using groupink.
Without using bind variable I got result (Cartesian product)
However if i created and used bind variable I got the same error
this is a dept data set:
select     "DEPARTMENTS"."DEPARTMENT_ID" as DEPTNO,
     "DEPARTMENTS"."DEPARTMENT_NAME" as "DEPARTMENT_NAME",
     "DEPARTMENTS"."LOCATION_ID" as "LOCATION_ID",
     "DEPARTMENTS"."MANAGER_ID" as "MANAGER_ID"
from     "HR"."DEPARTMENTS" "DEPARTMENTS"
this is the emp data set:
select     "EMPLOYEES"."COMMISSION_PCT" as "COMMISSION_PCT",
     "EMPLOYEES"."DEPARTMENT_ID" as "DEPARTMENT_ID",
     "EMPLOYEES"."EMAIL" as "EMAIL",
     "EMPLOYEES"."EMPLOYEE_ID" as "EMPLOYEE_ID",
     "EMPLOYEES"."FIRST_NAME" as "FIRST_NAME",
     "EMPLOYEES"."HIRE_DATE" as "HIRE_DATE",
     "EMPLOYEES"."JOB_ID" as "JOB_ID",
     "EMPLOYEES"."LAST_NAME" as "LAST_NAME",
     "EMPLOYEES"."MANAGER_ID" as "MANAGER_ID"
from     "HR"."EMPLOYEES" "EMPLOYEES"
WHERE "EMPLOYEES"."DEPARTMENT_ID" =:DEPTNO
Thanks for any tip!
Laszlo

Error rendering element. Exception: ORA-00942: table or view does not exist

Guru,
We are maintaining 10 internal Database through OEM 10g and using seesded reports.
When we try to create simple custom reports against one of the Target database , its failing with following error message ,
Query : select * from v$database
Error rendering element.
Exception: ORA-00942: table or view does not exist
select * from dual & v$session working ( But query execution happeniing from Reposistory Database not from Target instance )
Note:
I have reviewed thred "getting ORA-00942 while running report in GC"
Please give some light .
Regards,
Raju

This is an EM related question so I would suggest you post in the appropriate space "Enterprise Manager" -- https://forums.oracle.com/community/developer/english/enterprise_management/enterprise_manager/enterprise_manager_6
You may also review (In Grid Control 10.2, Creating a Report to Query 'V$SESSION 'Fails: 'Error Rendering Element. Exception: ORA-00942 Table Or View Does Not Exist' (Doc ID 356755.1)) and implement the solution for v$database
Thanks,
Hussein

On closing Photoshop CC, I am getting an error message on screen that read's "Selective Palette error: no element found at line 1. Are you able to assist with this problem?

Can anyone shed some light on this error message I am getting upon closing Photoshop CC
I am getting an error message on screen that read's "Selective Palette error: no element found at line 1. Are you able to assist with this problem?

Same issue here in WI and for me it was at 6:36p CST.
I'm changed my password, removed iCloud from my phone ... tried 3G and WIFI with no luck. I also cannot check it on my Mac or iPad. I was able to get contacts and calenders back on my phone but no mail yet.
Did the whole Apple support thing and apparently I'm part of the 1%
EDIT: Question: are all of you former MobileMe users as well? Just wondering because I know there were going to be some changes as they completely move MobileMe over to iCloud and drop the "extra" services. I just can't remember if it was just a single cut off date or a series of dates. THAT email is stuck in my iCloud folders.

BPM error:Container element in step transformation is not initialized

Hello Experts,
I am new to the concept of BPM.
I'm trying to create an integration process in which I'm taking an Idoc and processing it in many ways. The process contains many transformation steps. There two such transformation steps which have been placed in block step in a fork. And i get this error: Container element XXX in step transformation is not initialized
What could be the problem?
Regards,
Akhil

Hi
if u are getting the messaga with red sigh then it means it will craete the error while running the scenario.
but if it is in blue then i think it will not create any error.
the meaning of that statement is that the container u have defind is not used anywhere. it is just giving u a warning message.
Thanks
Rinku

Error: Invalid element 'servlet' in content of 'web-app'

Hi,
I m working on a project that includes JSPs, whenever I wanna add JSP to my project it shows following compilation error:
Invalid element 'servlet' in content of 'web-app', expected elements '[error-page, taglib, resource-env-ref, resource-ref, security-constraint, login-config, security-role, env-entry, ejb-ref, ejb-local-ref]'
I have thoroughly checked the web.xml. It is perfectly alright. It is as follows:
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<description>Empty web.xml file for Web Application</description>
<session-config>
<session-timeout>30</session-timeout>
</session-config>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
<welcome-file-list>
<welcome-file>index.jsp</welcome-file>
<welcome-file>index.html</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>myServlet</servlet-name>
<servlet-class>com.project.MainServlet</servlet-class>
<init-param>
Long postings are being truncated to ~1 kB at this time.

The Complete web.xml is as follows:
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<description>Empty web.xml file for Web Application</description>
<session-config>
<session-timeout>30</session-timeout>
</session-config>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
<welcome-file-list>
<welcome-file>index.jsp</welcome-file>
<welcome-file>index.html</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>montana</servlet-name>
<servlet-class>com.masstech.montana.boundary.uii.MainServlet</servlet-class>
<init-param>
<param-name>db</param-name>
<param-value>MontanaDS</param-value>
</init-param>
<init-param>
<param-name>user</param-name>
<param-value>MS</param-value>
</init-param>
<init-param>
<param-name>password</param-name>
<param-value>MS</param-value>
</init-param>
</servlet>
<servlet>
<servlet-n[i]Long postings are being truncated to ~1 kB at this time.

Installation error for elements 11 on mac

I keep getting this error and I don't know how to fix it and get it to install! Please help!
WARNING: DW031: Payload:{F6F5021E-0548-43C1-82CC-C5C7A6906585} Camera Profiles Installer 7.0.0.0 has been updated and has been selected for repair. The patch {0449467E-102A-4514-9F4D-91BCEE129390} Camera Profiles Installer_7.1_ElementsCameraRawProfile7.0All 7.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{F6F5021E-0548-43C1-82CC-C5C7A6906585} Camera Profiles Installer 7.0.0.0 has been updated and has been selected for repair. The patch {0449467E-102A-4514-9F4D-91BCEE129390} Camera Profiles Installer_7.1_ElementsCameraRawProfile7.0All 7.1.0.0 will be uninstalled now.
----------- Payload: {64191879-379D-4ADF-9D1E-929FC71E7218} Elements 11 Organizer 11.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirg4uZPBoU/Assets1/application/Adobe Elements 11 Organizer.app/Contents/MacOS/etc/cmp/trans-l5z.dat" to "/Applications/Adobe Elements 11 Organizer.app/Contents/MacOS/etc/cmp/trans-l5z.dat" Error 0(Seq 3085)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 3085)
ERROR: DF024: Unable to restore file at "/Applications/Adobe Elements 11 Organizer.app/Contents/MacOS/etc/cmp/trans-l5z.dat" from backup at "/private/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/Cleanup At Startup/.tempiGYkJC" Error 0(Seq 3085)
ERROR: DW063: Error rolling back command ARKDeleteFileCommand(Seq 3085)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: DW050: - Photoshop Camera Raw for Elements 11: Install failed
ERROR: DW050: - Elements 11 Organizer: Failed due to Language Pack installation failure
ERROR: DW050: - Elements 11 Organizer_AdobeElements11Organizer_en_US: Install failed
ERROR: DW050: - Adobe XMP Panels CS5: Install failed
ERROR: DW050: - AdobeTypeSupport CS5: Install failed
ERROR: DW050: - Adobe Linguistics CS5: Install failed
ERROR: DW050: - AdobeCMaps CS5: Install failed
ERROR: DW050: - Adobe Photoshop Elements 11_AdobePhotoshopElements11_en_US: Install failed
ERROR: DW050: - Adobe Photoshop Elements 11: Failed due to Language Pack installation failure

Please move the application /Applications/Adobe Elements 11 Organizer.app to trash(take a backup if you want) and then try again. Please let us know if the issue still persists.

New Adobe Photoshop elements 11-can not share pictures. I do use AOL email. Get error of "Elements 11 Organ. has stopped working, I have looked into sharing tab and my only option is Adobe email settings. I do have outlook set up to work on computer run

New Adobe Photoshop elements 11-can not share pictures. I do use AOL email. Get error of "Elements 11 Organ. has stopped working, I have looked into sharing tab and my only option is Adobe email settings. I do have outlook set up to work on computer running windows 8.1 Please help, Mainly use to share pictures. Thanks!

One thing puzzles me:
RedClayFarmer wrote:
I then found one suggestion that the problem might involve permissions. The suggestion was to right click PhotoshopElementsOrganizer.exe in its installation folder (which on my computer is at at D:\Photo\Elements 11 Organizer) and run Organizer as an administrator. This also failed.
I don't understand why running the exe from the installation folder would have worked.
I would have simply tried to run that exe from its real location :
Sorry, I can't help you more about permissions...

Error trying to publish (real time) to delivery: No response from remote execute trying to save assettype [error was -103].

Hi all,
I'm trying to publish for first time to a new environment (delivery).
The light of target destination is green.
When i click on "inicialize" i get these errors and in the docs i cannot find why or what i have to do.
Trying to publish asset types during inicialization it returns this error:
No response from remote execute trying to save assettype [error was -103].
Looking for the meaning for this i found: No table. What does it mean? Why the tool has not created the table?
And then, the next error message is shown (all of them are shown in the same screenshot) trying to mirroring. It might have to do with the previos error message... but i have no idea!
-12011. No response from remote execute trying to save assettype [error was -103]
sites.log in delivery environment says as follows
[2014-01-24 12:13:52,496 CET] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.db] SQLException loading table definition for SiteCatalog with state HY000: [FMWGEN][SQLServer JDBC Driver]Object has been closed.
java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver]Object has been closed.
[2014-01-24 12:13:52,527 CET] [ERROR] [.kernel.Default (self-tuning)'] [com.fatwire.logging.cs] ContentServer exception running CS recursively
COM.FutureTense.Common.ContentServerException: pagename not supplied Error code:BAD PARAMETER
[2014-01-24 12:13:52,543 CET] [ERROR] [.kernel.Default (self-tuning)'] [logging.cs.satellite.request] Error accessing the external page with pmd: page: ?Browser=Unknown Browser&SystemAssetsRoot=/dlv/futuretense_cs/&errdetail=0&errno=0&null= &pagename=fatwire/wem/sso/casInfo
[2014-01-24 12:13:52,543 CET] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.request] COM.FutureTense.Common.ContentServerException: ContentServerException: (Reading page page: ?Browser=Unknown Browser&SystemAssetsRoot=/dlv/futuretense_cs/&errdetail=0&errno=0&null= &pagename=fatwire/wem/sso/casInfo from co-resident Content Server failed (errno=0).) Error code:GENERIC SERVER ERROR
[2014-01-24 12:14:06,021 CET] [ERROR] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.db] SQLException loading table definition for SystemInfo with state HY000: [FMWGEN][SQLServer JDBC Driver]Object has been closed.
java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver]Object has been closed.
Does anybody know how to help here?
Thank you very much.
Gala

What SQL server driver are you using, Microsoft's or the jTDS driver (see jTDS JDBC Driver)? It may be worth trying the other.
Also, can you enable
com.fatwire.logging.cs=DEBUG
in log4j.properties and retest, then post the entire resulting sites.log and application server log somewhere for us to see? e.g somewhere like pastebin.com
Phil

Can't save image, error message ???

Hi, I'm trying to save a pdf image in photoshop, as I always do, hitting command S, or going to file-save. I keep getting an error message saying "could not save "x" file because the file is already in use or was left open". Well duh, of course it's in use, I'm working on it.
Anybody know what's going on here? Am I missing something?
Thanks!!
Eric

Thank you! I'll give it a try!
Date: Sun, 16 Aug 2009 15:31:32 -0600
From: [email protected]
To: [email protected]
Subject: can't save image, error message ???
happens once in a while not sure why try a save as and over write the file now make changes and do a save and see if it works.
If does not I would reset the preferences or trash the settings folder.
>

XML Parsing Error: no element found

Hi,
I'm working with BIPublisher 11g and I'm having the following error, this error occurred when I'm in the report and try to get the XML :
XML Parsing Error: no element found
Location: http://172.16.10.46:9704/xmlpserver/servlet/xdo
Line Number 4, Column 1:
And this is the DataEngine log I got:
<?xml version="1.0" encoding="UTF-8" ?>
- <debugLog>
- <msg time="2010-09-29T13:49:03.619+13:00" comp_id="bi_server1" type="NOTIFICATION" level="1" host_id="birepo.nzbus.net" host_addr="172.16.10.46" module="oracle.xdo" tid="45" user="<anonymous>" ecid="0000IhQxgQ15qYG6yzZf6G1Cbv8m0003n8" rid="0">
<attr name="APP" value="bipublisher#11.1.1.3.0" />
<txt>ReportModelContextImpl- Invoking dataengine dataprocessor..</txt>
</msg>
- <msg time="2010-09-29T13:49:03.817+13:00" comp_id="bi_server1" type="WARNING" level="1" host_id="birepo.nzbus.net" host_addr="172.16.10.46" module="oracle.xdo" tid="45" user="<anonymous>" ecid="0000IhQxgQ15qYG6yzZf6G1Cbv8m0003n8" rid="0">
<attr name="APP" value="bipublisher#11.1.1.3.0" />
<txt>java.lang.NullPointerException at oracle.xdo.dataengine.perf.StringPoolList.cleanup(StringPoolList.java:55) at oracle.xdo.dataengine.XMLPGEN.cleanup(XMLPGEN.java:1729) at oracle.xdo.dataengine.XMLPGEN.writeXMLDataStructure(XMLPGEN.java:220) at oracle.xdo.dataengine.XMLPGEN.processDataSet(XMLPGEN.java:1390) at oracle.xdo.dataengine.XMLPGEN.processMergedDataSet(XMLPGEN.java:1203) at oracle.xdo.dataengine.DataProcessor.processData(DataProcessor.java:365) at oracle.xdo.servlet.dataengine.DataProcessor.processData(DataProcessor.java:402) at oracle.xdo.servlet.dataengine.DataProcessor.processData(DataProcessor.java:389) at oracle.xdo.online.data.ClassicDataProcessor.process(ClassicDataProcessor.java:157) at oracle.xdo.servlet.ReportModelContextImpl.getReportXMLData(ReportModelContextImpl.java:188) at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:301) at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:87) at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1038) at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:603) at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:440) at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:419) at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:235) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:64) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:116) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:63) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)</txt>
</msg>
- <msg time="2010-09-29T13:49:03.818+13:00" comp_id="bi_server1" type="NOTIFICATION" level="1" host_id="birepo.nzbus.net" host_addr="172.16.10.46" module="oracle.xdo" tid="45" user="<anonymous>" ecid="0000IhQxgQ15qYG6yzZf6G1Cbv8m0003n8" rid="0">
<attr name="APP" value="bipublisher#11.1.1.3.0" />
<txt>Data Generation Completed...</txt>
</msg>
- <msg time="2010-09-29T13:49:03.818+13:00" comp_id="bi_server1" type="NOTIFICATION" level="1" host_id="birepo.nzbus.net" host_addr="172.16.10.46" module="oracle.xdo" tid="45" user="<anonymous>" ecid="0000IhQxgQ15qYG6yzZf6G1Cbv8m0003n8" rid="0">
<attr name="APP" value="bipublisher#11.1.1.3.0" />
<txt>Total Data Generation Time 0.0 seconds</txt>
</msg>
</debugLog>
Any suggestions.
Thanks,

Hi,
I am getting the same error.
Do we have a fix for this? The query was working fine until recently. But has started failing now with dataengine log same as above.
Is there any solution?
Thanks,
Divya
Edited by: 900143 on May 29, 2012 2:03 AM

[Application Update Error] - The element 'Field' in namespace 'urn:deployment-manifest-schema' cannot contain text.

Hello,
I developed a custom SharePoint 2013 Application (SharePoint hosted) and everything works fine. If I tried to update the application and I ran into the following error:
The element 'Field' in namespace 'urn:deployment-manifest-schema' cannot contain text. List
of possible elements expected: any element in namespace '##any'.
If I redeploy the application (without update, just a new instance) everything works fine. Only the update scenario throws the exception above.
I tried different things to solve that issue:
I recreated the feature
I checked all the custom field definitions, content types and lists inside the app.
I tried different O365 tenants and a SharePoint 2013 On Premise Development Server (Same problem on all systems)
Can anybody give me a tip to solve that problem?
Thanks in advance

Hi,
According to your description, when you try to update your SharePoint Hosted App, an error occurs.
To narrow down the issue, I would suggest you create a simple app without other components in it, deploy it and then update it to see if this error will still occur.
Once you get a workable app without the update issue, then you can add other customizations one after one in this app and perform the update. By doing this, it would
be easier to find out the root cause.
Anyway, you can take a look at the link below about updating app for more information:
http://msdn.microsoft.com/en-us/library/office/dn265910(v=office.15).aspx
Feel free to reply if there any progress.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Patrick Liang
TechNet Community Support

Save as error in Elements

Similar Messages

Maybe you are looking for