Save As feature doesnt work

Trying to save as from Acrobat 9 pro extended, I get error message The document could not be saved. There was a problem reading this document (14), if I hit ctrl and ok at the same time the next error message is Expected a dict object. Only happens on 1 pc

You are not addressing Adobe forum in these user forums.
This forum deals only with Photoshop proper (see next post for a related subject).
BOILERPLATE TEXT:
Note that because this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Similar Messages

"Save as PDF" doesnt work

Hello I've done a clean install of Snow Leopard and restored my system from Time Machine.
Now the print option "Save as PDF" doesnt work. It doesnt give an error, just nothing happens. What could I do? I've repaired permissions already.

Dig into your preferences folder ( yourUserName/Library/Preferences/) and >look for a plist file with a name such as:
com.apple.print.custompresets.forprinter.EPSONStylusNX200.plist
...where EPSON would be the name of whatever printer you have.
Delete that file and try again.
Already done that, the problem persists :S
Is that option grayed out?
No, its not.
Might it be putting the saved file somewhere you can't find it?
Do the normal options pop up as to where to save it?
No, nothig pop out, when I click the button nothing happens at all

3 Finger Swipe Feature doesnt work with Windows 7?

Good Evening
I've read a thread about this feature for Mac. But does this also work for 7 Trackpad Users?
I've got a 2 years old Toshiba Notebook and use newest Synaptics Driver. It support 3 finger tap and swipe fuctions - both working great. 3 Finger swipe up/down only in a few apps.
What about ff?

You can check the value of the corresponding <b>browser.gesture</b> prefs on the about:config page to see if they have a value.
See http://kb.mozillazine.org/about%3Aconfig

My camera disappeared and the flashlight feature doesnt work either on my Iphone5

I noticed on my few months old Iphone5 that the built in camera feature app has disappeared and the flashlight app work light the LED external light. Why would this be?

Check: Settings - General - Restrictions - Camera = ???

Group Pickup feature doesnt work when add the phones to a hunt group in BE3k

Hi All,
I have a blast group with pilot number 300 , there are two members ext. 600 and ext.601 in that blast group. I added these two extensions to Call pickup group and enable "Audio and Visual Alert". I also have a spare phone ext. 602.
when I dialed between extensions ext.600,601 and 602 , group pick up feature is woking and I can see "call available pickup " on the phone screen and hear the audio alert. But when I dial the hunt group pilot number 300 from spare phone ext.602 , both ext.600 and ext. 601 are ringing but I can't see call pickup indicators on the screen. I also tried "Opickup' on the phone but got "no call available for pickup" message on the screen.
Any ideas why and how to fix this issue?

Hi Billy
This is not supported. This support is being added for next release.
Thanks

"E-mail report" feature doesnt work as it supposed to ?

hi,
I've created a custom public report in OEM and i'm scheduling it with email sending. However, the mail i'm receiving is:
From : wrong value -> it contains the value from 'reply to' field in the schedule folder
the content is just a link to the OEM login page !!!!
i thought at least i will have a link to the report and even the report output in the mail received.
Is it a bug or is it the normal behavior ???
Thanks for your replies
Christophe

Apart from the fact that you need to set the "Schedule report" checkbox and E-Mail recipient in the Report Definition you don't need to do any additional setup.
So in the report definition go to the Schedule Page
Check "Schedule Report"
Check "E-mail report each time the scheduled report completes"
Enter the "Reply To" (Senders address)
Enter the "To" (Recipient to receive the e-mail)
Regards
Rob
http://oemgc.wordpress.com

I updated to MAvericks and my double click on the trackpad doesnt work

I updated to MAvericks and my double click on the trackpad doesnt work.
Also the spotlight feature doesnt work either, it makes a sound everytime i click on it.
please help.
Thank you!
fxm

Did you make a clean install and restore the library from a backup? No.
Or did you install the new system amd new version on top of the old system? Yes.
What version did you upgrade from? 3.4
Is your Aperture library onyour internal drive or also on an external drive? External
During the update, has your Aperture library been moved in any way? No, its still where it was on the external drive.
Thanks for your help. Ideas?

Wlan fritz box 6360 doesnt work,

WLAN doesnt work. imac finds net, but cant connect.
LAN no problem

sohail579 wrote:
Hi All
This is my first post so be gentle!!
I was using my BTOpenreach modem with my Draytek 2830Vn+. Unfortunately the Draytek has now been refunded due to a fault and I'm back on my HomeHub3.
After much research I have found FRITZ!Box Fon WLAN 7390 to be a good replacement for both Modem and Router.
Can anyone confirm this will work with my BT Infinity line and does it perform better than the BT Supplied equipment? How is the wireless perfromance and even the Ethernet Performance?
Also how long has this been out for is it worth waiting for a newer model?
Thanks!
Hi sohail579
The fritz!box 7390 definitly works with Infinity, even with the factory firmware, you just set the VLAN to 101 and NO password needed. Even easier when using newer firmware.
Ethernet performance is just as good, wireless I found slightly weaker signal, but does have simultaneous dual band wireless, so might help you there.
It is more expensive than the Draytek 2750, but does offer far more for the money.
Plug your phones into it, it is also a Dect base station, it has 5 answerphones, VOIP and many many more features.
That is why it is expensive.
If you have your phones connected mine did not give out Caller Indentification , although AVM say it should and are looking into it but after 2 months still not working. Unfortunatly I cannot wait, I must have Caller ID and had to let mine go.
I believe it has been out for about 6-9 months.
So to sum up, if you really need all the fetures go for the Fritz, but remember (my caller ID) was not working
If you dont need all the features drop down to the Draytek 2750n and save a bit of money.
If you go for the Fritz , the cheapest place I could find for the International version was in France.
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Side scrollbar doesnt work and wont respond when i drag it

side scrollbar doesnt work and wont respond when i drag it

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
#Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
#* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
#* In Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
#In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
#In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
#Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Also check to make sure that the mouse/trackpad driver is up to date.
Thank you.

1st generation ipod nano's shuffle feature stoped working

my 1st generation ipod nano has a shuffle feature, but now it doesnt work. when i turn on the shuffle feature and try to play all songs it only plays the one song you select to be the first song in the shuffle order. when i pick a list of songs it only plays the first song and says in the top corner: song "1 of 1" as if there were no other songs. please help me or else im getting rid of my ipod and not using apple technology ever again.
Message was edited by: badrubberpiggy25

good luck with that

"Always ask me where to save files" does not work.

Summary: The "Always ask me where to save files" feature does not work. No dialog box comes up, apparently because the browser is stuck on a bad old read-only lastDir location, in a prefs.js file that I can't edit.
Details:
I am using Firefox 30.0 on Mac OS 10.6.8. My Mac has a both a read/write Mac partition that I use most of the time, and a bootcamp Windows partition drive ("C"), which I can read but not write to.
At some point I accidentally tried to download a file from a site, using Firefox, to the read-only Windows C drive. Ever since that time, I have not been able to download any files from Firefox, except to the firefox/downloads folder. This is inconvenient. If, in preferences, I try to set downloads to ""Always ask me where to save files", the dialog box does not come up when I actually try to save files. This problem does not apply to saving photos by right-clicking them.
If I open, in text-edit, mozilla/firefox/profiles/t4vockvue.default/prefs.js, which was saved yesterday, I can see a problematic line. It reads:
user_pref("browser.download.lastDir", "C:\\Documents and Settings\\[etcetc]");
C:\\Documents and Settings\\[etcetc] being the read-only windows directory.
This prefs.js is apparently not an editable file.
I tried to fix this by opening a browser tab in Firefox and opening about:config. The editable browser.download.lastDir does NOT show the same "lastDir"....it shows some directory that I successfully downloaded photos to, by right-clicking on a photo.
How can I fix this problem?
Thanks.

To confirm which profile folder is active when you are running Firefox, it is easiest to open it from inside Firefox as follows:
Sometimes the file that stores the customizations becomes corrupted and fails to update properly at the end of your session. You can rename the file and customize from scratch.
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
In the first table on the page, click the "Show in Finder" button (Windows: "Show Folder" button).
Hopefully you are using a separate profile folder on each OS.

Where did the "save as" feature go?

I just opened up a Pages document, after my Lion upgrade. I want to use the orginal document, make changes and save as a new document. However, when I clicked on "File" to go to the "Save As," I discovered it is no longer there. Where is the "Save As" feature now. This is, obviously, a crucial need.

Pondini wrote:
In most cases, though, you don't need a separate file. Just make a Version with Cmd+S.
Much faster, and takes up much less space, since it only saves the changes, not the whole document.
As a work machine processing files, folders, and graphics, in many cases I do, everyday.
Changing file name and format and still have the original to work with.
Seems crazy to me.
Message was edited by: leroydouglas
update: I was successfiul to create a keyboard shortcut for Duplicate not Export (my preferred.)

Save as text not working

When I try to save a PDF as text, my document is empty. Also, it appears I only have the option of saving as accessible text, not plain text. I am using the latest version (8.1.2). Anyone able to do this successfully?

I have found this does work, but only with Acrobat Pro. You must use save as, accessable text (plain text doesnt work with the document that I have been using).
I have tried the SAVE AS TEXT option with Adobe Reader, versions 6, 7 & 8. I wonder why that option is even available.

I am running a laptop with windows 7 on it and trying to use the save as feature in Photoshop CS6 and won't let me save as anything. Please help?

I am running a laptop with windows 7 and am trying to use the save as feature in Photoshop CS6 and it wont let me save as anything. Can someone please help me with this?

A screenshot of your Photoshop work area showing the open file you want to save as, the Layers panel open, and the Save as... dialog open might give us a clue as to what is going on.
To take a screenshot and save it as a file
For Windows 7, Printscreen, open a New File in Photoshop, Ctrl v to paste, then save as jpeg (the other trick was for windows 8)
Use the Camera icon on your reply to upload it.
Also File > Save for Web is a good workaround if you just need a jpeg, png, or gif.
Gene

Trying to install the newest version of itunes on my pc and am getting "program cant start because msvcr80.dll is missing from your computer" reinstalling doesnt work. and then it says error 7 (windows error 126)

trying to install the newest version of itunes on my pc and am getting "program cant start because msvcr80.dll is missing from your computer" reinstalling doesnt work. and then it says error 7 (windows error 126). Any help would be appreciated. Using Windows 7 enterprise on an hp Z600

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Save As feature doesnt work

Similar Messages

Maybe you are looking for