Save As is back in case you haven't noticed
In addition to using Command-Shift-Option-S to Save As, you can use File and the Option key to reveal Save As along with Close All.
Open a TextEdit document,for example. Click File then press the Alt/Option key to reveal the Save As option.
To some extent it does not matter. Save as is pretty useless unless you can disable autosave. You open a document, work on it and save as . . . but meanwhile the original has been altered through autosave.
I do this all the tine, start to play with a document, then think never mind. But now I have to revert. I suppose it just depends on whether you want to tell it to save, or tell it to revert. Which way you think.
But in any event, save as by itself is really of limited value.
Yes, I have seen posts about terminal commands you can use to disable autosave for an app, but really, is that any way to manage your mac? Is a simple either or preference option to much to ask? I know, then there may be confusion as people work on one mac or another . . . so on it goes . . .
I agree, the old paradigm was fine - and logical - and should not havve been altered.
Similar Messages
-
Do text messages not back up when you save to ICloud?
do rext message not back up when you save and restore to ICloud
The backup should contain text messages. The backup includes (from http://support.apple.com/kb/PH12519):
Photos and videos in your Camera Roll
Device settings
App data
Home screen and app organization
iMessage, text (SMS), and MMS messages
Ringtones
Visual Voicemail -
This might be related to my post about not being able to enter a column name in the where clause, and Q&A always using COUNTRY_OF_ORIGIN.
Anyway, I took my original designer file, removed the first page of the report I dd, then added a new page, but this time with a visualisation of sales amount by product name. Saved the whole lot to a new pbix file, and uploaded it into the PowerBI
cloud. Pinned the visualsation to a dashboard, and started to enter a query.
Up pops the message 'It looks like you haven't added any data to this dashboard' etc, etc.
But, but, but I have uploaded the data. It's all in my pbix file. It seems that PowerBI usese the first column of my first dataset as the master for column names in the where clause. And if you do not have a visualisation that uses that column (i.e. COUNTRY_OF_ORIGIN
in my case) then Q&A doesn't think it has a dataset.
I am going to try some other tests to see if I can persuade PowerBI and Q&A to do its business properly.
AngusThe reset will not erase the virus but the reset can be done up to you.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
I can't save *new* documents back to SharePoint
I can’t save *new* documents back to SharePoint. We have a SharePoint 2013 development environment, running on Windows Server 2012 and a Windows 7 Client Computer with Office 2010.
Every time I click „new document“, SharePoint opens the corresponding template file in the client application (Word, Excel,…) So far, so good. When i select „Save“, the client application brings up a local save path on the client computer, not the SharePoint
document library.
I did some research and tried many approaches, but none of them worked.
I installed the Desktop Experience Feature on the Windows Server 2012, added the server address to trusted sites, gave the user farm-administrator rights (to make sure it is no security problem) and switched the authentication mode for the web application.
Does anyone know this problem and found a solution?Hi,
For troubleshooting your issue, you can try to add a registry value to your local registry (on a machine with Office Applications installed through which you are accessing SharePoint sites):
Click Start, type regedit in the Start Search box, and then press ENTER.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
On the Edit menu, point to New, and then click Multi-String Value.
Type AuthForwardServerList, and then press ENTER.
On the Edit menu, click Modify.
In the Value data box, type the URL of the server that hosts the Web share, and then click OK.
Note You can also type a list of URLs in the Value data box. For more information, see the "Sample URL list" section in this article.
Exit Registry Editor.
Reference:
http://sharepoint-for-real.blogspot.com/2013/07/sharepoint-2013-new-file-cannot-be.html
https://isharepoint.wordpress.com/2011/05/26/can-not-save-document-back-into-document-library/
https://mohamedelkassas.wordpress.com/2014/01/31/can-not-save-document-back-into-document-library-in-sharepoint-2010/
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Before installing 4.0.1 I could right click on the Firefox icon on my computer's taskbar and hit close window. It would then give me the option to "save tabs and quit" or "close all tabs."
Now it just alerts me that I'll be closing multiple tabs.
It was convenient to be able to close Firefox and open it with all of the tabs in place. There is nothing more irritating than having multiple tabs lost because your computer did an update overnight and restarted. Also it was helpful when you wanted to run a tun-up or cleaner that asked you close out of your browser for optimum result's.
How do I get "save and quit" back?
ThanksFirefox now always stores the old session, and you can access it by going to the History menu and selecting "Restore Previous Session"
If you want Firefox to display the message to save the session, it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
If you always open the last set of tabs, an alternative approach is this:
# Click the orange Firefox button, then select options to open the options window
# Go to the General panel
# Change the setting "When Firefox starts" to "Show my windows and tabs from last time" -
How do I get my "save and quit" back after updating to the latest version of Firefox on a PC?
How do I get my "save and quit" back I do not like having to close all my tabs and loose all that every time I close out of firefox. When I got the latest version of firefox I lost the ability for firefox to save my tabs when I close out of it. I have to go through the process of opening all my tabs and refinding the sites all over again each time I load up firefox. I can not find the place to change the settings to being back the way they were before firefox got the latest version. I want my "save and quit" back.
Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session.<br />
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time.<br />
There is also a "Restore Previous Session" button on the default <b>about:home</b> Home page.<br />
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time" -
What does SQL write to that allow changes to be undone or rolled back in case of a system failure?
What does SQL write to that allow changes to be undone or rolled back in case of a system failure?
Hello,
If i read your question correctly you are asking about how uncommited transaction are rolled back.For this, concept of transaction log came into picture.where first changes were first made to transaction log and then into memory .Before any change is made
to real data file change is made to trn log files so that if rollback comes it can see in log and rollback it.
I would suggest you to read Famous article by log which will explain you
http://technet.microsoft.com/en-us/magazine/2009.02.logging.aspx
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
I can't unlock my phone: You haven't fulfilled your service contract.
I have a Nokia Lumia 925 and I wanted to unlock it because I want to switch carriers, but everytime I go to unlock it I get an e-mail back saying: "Thank you for contacting AT&T about unlocking your mobile device.Unfortunately, your unlock request was denied because:You haven’t fulfilled your service contract."I don't understand why it says this because on my profile under user information it says that my contract has ended. It's becoming really frustrating and even after calling the help center there still doesn't seem to be a solution.
Send a private message to . Include the account owners name, account number, and phone number, and the IMEI) along with a description of the problem. You should hear something back within 24 hours.
-
I use Time Machine with an external hard disc which has worked perfectly for some years. Recently Time Machine has aborted backups if the screen saver starts when back-up is in progress. I use a Maxtor OneTouch4 back-up system. Any ideas?
Has Apple recently up-dated my OS (Lion) such that every time the screen saver starts it disables Time Machine. I have to switch-off the computer and re-start in order to undertake a back-up. I have now switched of all screen savers.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) -
Have been trying to remove (for the second time) the "Antivirus Security Pro" virus from this laptop (which insidiously has invaded Firefox to the extent of display several pop-ups [incl. Recommended sites list; security rating of the active webpage tab displayed; video advertisements; scroll down and enlarge the screen shot in following post: https://support.mozilla.org/en-US/questions/959400]. As part of this process was instructed to shut down & power-up the laptop in Windows safe mode. Upon completing this step I opened Firefox and the following message appears at the bottom of the browser (no matter what tab is displayed): "It looks like you haven't started Firefox in a while. Do you want to clean it up for a fresh, like-new experience? And by the way, welcome back!" There is also a button "Reset Firefox..." displayed to the right of this message and an "X" which is assumed to close out this message. Why does this message appear? Had been on Firefox (while in normal mode) just prior to encountering the re-emergence of the virus attack, so am questioning the reason for this message displaying and am suspicious of it being a part of the viral threat. Am hesitant to either reset and/or uninstall/reinstall Firefox prior to running another scan with Malwarebytes, Adaware and Spybot S&D . In fact Firefox was just upgraded to v.25 two days ago (when the laptop was believed to be free from this virus as well as from the ViewMgr.exe and the AVG/vprot.exe viruses. These initial virus removals were performed in the Windows normal mode, so while awaiting a response to this question, will do the scans and perform any additional manual file/registry search and destroy in the Windows safe mode. Will also try a test run of Firefox in it's own safe mode when the removal processes are completed. Would appreciate a rapid response on whether or not to do a Firefox reset and/or removal if this second attempt at removing this virus is unsuccessful.
The reset will not erase the virus but the reset can be done up to you.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
Trying to back up iPad. get"haven't backed up in 5 weeks..."
Trying backup my iPad and sync with iTune. The message box "you haven't backed up in 5 weeks...." won't go away. I keep pressing okay but nothing happens.
What do I do?
Also for some reason my iMac in App Store has a very old user id for iMovie and iTunes that I had when I first bought my Mac Book Pro in 2009. Because of major problems with Google and other problems I changed my user id. But now when I get updates on certain apps the orginal user id shows up and of course I don't remember what password I used. I have several times changed the user id to my new one in the App acount but still every now and then when I get an update I have to go through the whole again. This time however it wants me to change the password and I am afraid to change the password just for the old user id because it may mess up everything.
Any suggestions.jcpete60 wrote:
Trying backup my iPad and sync with iTune. The message box "you haven't backed up in 5 weeks...." won't go away. I keep pressing okay but nothing happens.
What do I do?
Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
Why am I seeing the message"you haven't verified ur id yet"every time I tried to install an app but i did verify my id
Sign out and back into your apple id from Settings>iTunes and App stores>(Your apple ID)>Sign Out and then sign in again with the new address. Close app store from running in the background (or restart the phone if your unsure how to do this). If when trying to update any apps they are still asking for the old apple ID, delete and re-install those apps.
-
Since upgrading to Snow Leopard yesterday, twice I've been unable to get my screen saver to release back to my working desktop. Anybody else have this issue?
For a few users, since some point in OS X 10.6 Snow Leopard, there has been an occasional problem when trying to wake from sleep if you have Bluetooth enabled for the keyboard, Magic Mouse, Trackpad, etc.
The solution for me that worked 100% of the time was: System Preferences>Energy Saver and set 'computer sleep' to 'never'.
For me, the problem ran intermittently through 10.6.something, all of 10.7 and now, finally, seems to be resolved in 10.8.2. -
My Firefox crashed with important information on it!!!
My Firefox has been crashing every day sometimes several times a day. I have emailed your staff back many times looking for a reason for the crashed without any response. I have been able to get by because I would restore the settings and continue what I was doing. WELL….this last crash has disappeared from any way of getting it back and IT HAD SOME REALLY REALLY IMPORTANT OPENED WINDOWS I WAS WORKING ON (EMPLOYMENT INFO, I AM UNEMPLOYED!) AND NOW THEY ARE GONE AND I CANNOT GET THEM BACK!! YOU NEED TO HELP ME RESTORE THAT OPEN WINDOWS FOR ME. IT IS REALLY IMPORTANT!! I NEED SOME DESPERATE HELP NOW!!
Thanks,
NickNick, sorry to hear about that. I'm not sure where you are sending the emails, but if you use the form to submit your crash information, that goes into a database for review by the developers instead of coming to the support volunteers here.
Did you try the History > Restore Previous Session command? Firefox sometimes saves form data in the session history. This data may age out, so you should use that menu item as soon as possible.
Going forward, consider installing the [https://addons.mozilla.org/en-US/firefox/addon/lazarus-form-recovery/ Lazarus: Form Recovery] extension if you are filling long forms and Firefox is unstable.
With respect to the crashes, there are many possible reasons for Firefox to crash. Have you reviewed the help articles for diagnosis? For example: [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]]. -
Need to save an ad back to version 10.1
I have been asked by an advertiser to save an ad that I created as Flash version 10.1, but Flash CC will only go back to version 10.3. What can I do?
you can save Flash files back as far as 9 by editing the global player script.
if you do a search for FP9 Global Player script in this forum you will see directions on how to do it. It is very easy to make the edits.
Cheers
Maybe you are looking for
-
My ipad and my ipod were both stolen during a robbery at our home. How can I deauthorize both of these without having them in my possession? I did delete the ipad from my itunes account.
-
I need to pull some text out of a database string the string returned is 0]Nx Where "N" is an integer, single digit (i believe, but could be more). Can somebody help me with direction on how to obtain everything between ] and X? Thank you, Jon Parkhu
-
Gradients using black print very dark
I created a number of documents using pages in pages 06, which I now use with pages 09. My problem is that gradients using black print much darker than they did before, indeed so dark they are unusable. The gradients are generally made up of black an
-
Hi experts!! I need to create a disposition variable in the toolbar of my ALV, does anybody know how can I do this? Thanks a lot!! Regards, Rebeca
-
After a crash I closed out of Firefox but have not been given an option to restore my session afterwards. Also in my chronicles no sites show up. I did deactivate the history at some point. Is there anyway to recover my previously open tabs?