Save as no longer works; it doesn't work in Microsoft either. I've only been using this forever.

I'm not sure how long this has been going on, a couple of months? I was able to get download to work by setting the address to "download". The "save as" doesn't work ... it only has save and until I changed the setting, it didn't save at all. I do a lot of genealogy which entails copying and saving as.
Because it doesn't work in Microsoft, I thought they turned off something in one of their updates, but getting them to admit it .. well. I can't be the only one suffering with this problem.
I am using an Elitebook 8540p with Win 8.1. I have Office 2013.

A post was flagged as '''Solved Problem.''' Please remove that flag.
If you don’t, others that can help may not read this post.
http://kb.mozillazine.org/Unable_to_save_or_download_files

Similar Messages

  • I have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

    i have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

    Is it this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Otherwise:
    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Old files with a large number of comments no longer work properly in either Adobe Acrobat DC or or Acrobat Reader

    I made a series of interactive ebooks wiith Adobe Acrobat Pro. They worked fine in the old Adobe Reader. But now the commenting feature does not work properly either in Adobe Reader DC or Adobe Acrobat DC.  When I open the comments, everything slows down or else I get blank pages. The tools are not usable. There seems to be some compatibility issue between what was done in these books with the commenting tools and the new applications. Has anybody experienced the same?

    Hi Anubha,
    Thanks for your reply. With the new Acrobat Reader DC, I have the same problem on two computers, one with Windows 7 and one with Windows 8.1. I downloaded a trial version of Adobe Acrobat DC on the computer with 8,1. Then I found out that I had the same problem with Acrobat DC as I did with Reader DC.
    I made these e-books with Acrobat Adobe Pro 11. I never had a problem with Pro 11 or with previous Readers. Also I have sent these e-books out to other people who had Reader 11 and they had no problems. Now it seems that the books are not usable – at least in the fullest way -- for me or for anyone else using the latest version of Reader.
    Any help would be appreciated. I have put a lot of work into these e-books.
    De : Anubha Goel 
    Envoyé : April-21-15 12:47 AM
    À : michael jaegermeister
    Objet : You have been mentioned by Anubha Goel in Re: old files with a large number of comments no longer work properly in either Adobe Acrobat DC or or Acrobat Reader in Adobe Community
    You have been mentioned
    by Anubha Goel <https://forums.adobe.com/people/Anubha+Goel?et=notification.mention>  in Re: old files with a large number of comments no longer work properly in either Adobe Acrobat DC or or Acrobat Reader in Adobe Community - View Anubha Goel's reference to you <https://forums.adobe.com/message/7456900?et=notification.mention#7456900>

  • Is the apple software compatible with Microsoft office? May I know if I will be able to save al of my work from Microsoft office to the apple software?

    Is the apple software compatible with Microsoft office? May I know if I will be able to save al of my work from Microsoft office to the apple software?

    mariamvb wrote:
    Is the apple software compatible with Microsoft office? May I know if I will be able to save al of my work from Microsoft office to the apple software?
    It sounds to me that you are migrating from a PC computer to a Mac.
    To the extent that you are using Microsoft Office on your PC, you should just purchase Microsoft Office 2011 for your Mac.  All of your Word, Excel and PowerPoint files should open easily in Office 2011.  Your contact/mail program, Outlook, is now also supported in Office 2011, but I personally have no experience in cross-platform data transfer for Outlook.  Somewith with cross-platform Outlook experience, please jump in!

  • I have Acrobat 9.5 and when I try to create pdf from scanner, it displays an error "Adobe acrobat has stopped working". Is there any way I can use this functionality?

    I have Acrobat 9.5 and when I try to create>pdf from scanner, it displays an error "Adobe acrobat has stopped working". Is there any way I can use this functionality?

    Provide you have Acrobat 9 installed in an OS for which Acrobat 9 is compatible then you can use the functionality.
    As well, you need a scanner connected, powered up, and the software installed. Acrobat 9 "prefers" TWAIN drivers.
    Always visit the scanner vendor's site and download - install the latest greatest software.
    n.b., The Acrobat 9.x product family passed into "End of Support" mid-year 2013.
    As well the Acrobat 9.x product family is not compatible with contemporary OSs.
    Be well...

  • Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is the f

    Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is the fix?

    Do you get an error message? If so, what does it say?
    Do you get a Blue Screen?
    Does something else happen?

  • I cannot seem to load raw images into LR 2.5.  I've been using this for years.  I always load from memory card, but it gives me an unknown error message.  I tried to load from camera, hard drive, & external drive and still will not work.  I checked import

    I cannot seem to load raw images into LR 2.5.  I've been using this for years.  I always load from memory card, but it gives me an unknown error message.  I tried to load from camera, hard drive, & external drive and still will not work.  I checked import menu and nothing has changed.  I loaded the photos onto my tablet and images are fine, so do not feel it is the memory card.  Any thoughts?

    The error message probably said "unsupported or damaged"
    The T3 requires Lightroom 3.4.1 or later. You can either upgrade to a more current version of Lightroom (version 5.6 is the most recent) or you can use the free Adobe DNG Converter to convert the RAWs to DNG, which should import into Lightroom properly.

  • I don't know what to order. I want PS for photo editing and some composting. I don't do any website work or sharing yet. I have been using elements for a few years and also have Lightroom 5 on my desktop. I don't want to spend $1000s for a bunch of stuff

    I don't know what to order. I want PS for photo editing and some composting. I don't do any website work or sharing yet. I have been using elements for a few years and also have Lightroom 5 on my desktop. I don't want to spend $1000s for a bunch of stuff I don't use. Any advice on what to buy?

    Well, there is a whole world of free or affordable software out there like GIMP, PDPaint and similar. Otherwise if you want to stick with Adobe stuff signing up for the CC photography program would be the most cost-efficient way...
    Mylenium

  • My iphone 4s suddenly has no sound whatsoever!! i have been using this for barely a month now, brand new. what's wrong with it???? but when i use my headphones, it works fine but when i took it off, it doesnt work anymore!!! grrrrr!!!!

    Ive been using this brand new iphone 4s for barely a month now and then all of a sudden, it lost its sound! but when i use my headphones, it works. when i take it off, it doesnt! grrr... what should i do?

    Yes my Iphone has done the same thing!!! I was listning to music then it just stopped.
    There is no sound coming from it what so ever!!!! I have tried eveything, i actually work for a mobile company and i on Ipone support and i know all the tricks but nothing has worked!!! Not happy at all!! Restoring to new dose nothing, the same as when i put it in to safe mode?????????

  • Pasting from a web page into a File-Save dialog no longer works; causes a freeze-up

    When I place an order on Amazon, I copy the order number, then print the invoice to .pdf. When the file save dialog comes up, I paste in the order number as part of the file name. I used to, that is. At some point the pasting part no longer worked: nothing (visible anyway) is pasted, but something is happening, as the file save process hangs, and I have to use task manager to kill it. Then, the print process is trashed - if you try to print again, you get an error - and I have to restart Firefox to clear that.
    This copy/paste procedure works fine in IE & Chrome.

    The only way I was able to reproduce what you described is to run the script after copying a picture.
    Here is a refined version.
    It make two attempts to grab text items from the clipboard.
    If both failed, it send an error message.
    --[SCRIPT table2text]
    Enregistrer le script en tant qu'Application ou Progiciel : table2text.app
    déplacer l'application créée dans le dossier
    <VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:
    Il vous faudra peut-être créer le dossier Applications.
    Copiez vos données dans le Presse-papiers.
    menu Scripts > table2text
    Le presse-papiers sera alimenté par le composant Text ou utf8 du contenu initial.
    +++++++
    Save the script as an Application or an Application Bundle: table2text.app
    Move the newly created application into the folder:
    <startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:
    Maybe you would have to create the folder Applications by yourself.
    Copy your block of datas to the Clipboard.
    menu Scripts > table2text
    The Clipboard will be filled with the text or the utf8 component of its original contents.
    Yvan KOENIG (Vallauris, FRANCE)
    4 février 2009
    --=====
    on run
    try
    set the clipboard to (the clipboard as text)
    on error
    try
    set the clipboard to (the clipboard as «class utf8»)
    on error
    if my parleFrancais() then
    error "Pas de données texte dans le presse-papiers !"
    else
    error "No valid text data in the Clipboard !"
    end if
    end try
    end try
    end run
    --=====
    on parleFrancais()
    local z
    try
    tell application theApp to set z to localized string "Cancel"
    on error
    set z to "Cancel"
    end try
    return (z = "Annuler")
    end parleFrancais
    --=====
    --[/SCRIPT]
    Yvan KOENIG (from FRANCE mercredi 4 février 2009 21:49:14)

  • HT203687 iCloud is now no longer working with Outlook running on Windows Vista. Is this still unresolved?

    iCloud is no longer working with my Outlook 2007 running on Windows Vista.  Is there any resolution from Apple?

    Hi,
    Please check whether the issue happens when using the Outlook 2010 with Windows server 2003 SP2 to access other mailboxes, such as new created Exchange 2013 mailbox or other migration mailbox.
    Since the issue doesn’t occur when using Outlook in other machine, the mailbox configuration in Exchange server side should be correct. Please
    create a new Outlook profile
    for the problematic user in Windows server 2003 with Outlook 2010 to have a try.
    Regards,
    Winnie Liang
    TechNet Community Support

  • My ImageClass MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. How can I resolve this?

    My Image Class MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. I have checked with Cannon and they do not list my partricular machine among their driver updates. Is there another place to download a driver suitable for Mavericks?

    Your MF4380dn is supported by the latest UFR2 v10.4.0 driver that supports 10.9. Here is a link from the Canon Australia web site,
    http://support-au.canon.com.au/contents/AU/EN/0100491502.html
    Before installing this driver, please remove the MF4380 from Printers & Scanners (unless you have already performed the reset that Carolyn mentions which will remove it for you). Then run the v10.4.0 installer and when it has completed, open Printers & Scanners and add the MF4380.

  • When is apple going to fix the fact that icloud no longer works with microsoft outlook?

    When is apple going to fix icloud so that it works with microsoft outlook again? 

    I am talking about everything i have lost since downgrading to IOS6.  My contacts and calendar no longer sync with my outlook 2010!!!!! .....and I can't downgrade to IOS 5 because apple has deleted that version.  thanx APPLE for nothing!

  • HT4990 I made two drafts of cards that I wanted to send today and when I go into the drafts and click on buy,  nothing happens... It won't allow me to purchase my cards! I've been using this service since it came out with no problems, but now it doesn't w

    Is apple working to fix this bug now? Anyone else having the same issue?

    The 'problem with a previous purchase' message implies that iTunes wasn't able to collect the payment from your last purchase - until that is paid you won't be able to download anything else from the store, including free items, redownloading past purchases, and updates to your apps.
    For a card to have a chance of being accepted it needs to be registered to the same name and address (including format and spacing etc) that you have on your iTunes account, and have been issued by a bank in the country where you and your iTunes account are. If they're debit cards that you are trying to use then they don't appear to still be accepted in all countries, and even where they are it seems that not all work.
    If you don't have any credit/debit cards that are accepted by iTunes then are iTunes gift cards available in your country (they are not available in all and they are country-specific, they can only be used in their country of issue) ? If they are then you could potentially use them as your payment method.

  • "Save As" no longer works

    As of last week my CS3 version will no longer let me choose "Save As" and modify the name of the working file to something else, the button is shaded out.  As soon as I choose an already existing file name in the folder listed does it make the button active.  I can not just alter the file name already shown in the field.  I am thinking this is a virus, but searches come up blank.  Since I haven't upgraded or changed anything lately, I am looking for anyone else who has this issue.

    Might be helpful to list some system specifics.  At this point we don't even know whether you're using a Mac or PC.
    Clearing Photoshop preferences to defaults then re-establishing your own preferences may help.  This involves pressing and holding 3 keys during a cold start of Photoshop, then confirming deletion of the current preferences.
    -Noel

Maybe you are looking for