Save as problem Mavericks

Just upgraded from Mountain Lion to OS 10.9.2  and now I can't "save as" using a new file name in same folder.  Message received says I'm trying to save with the same name (after I've added a word to the original file name).  I can save as to a different folder.
Example:
original file name: 12345
new file name:  Small 12345

Try holding down the option key to see if Save will turn to Save As. Works with some applications, but not all.

Similar Messages

  • Save As problems in Microsoft Word?

    I upgraded to Mavericks last week and am either having repeated Senior Moment memory lapses or having periodic problems saving Word files (Office 11 14.3.8).  Both times this happened, I made changes to a Word document and saved it and closed it.  Then I later went back and opened the file later and the changes were not there.  The first time, I thought perhaps I had screwed up, but then it happened again this morning.   I think they were both files sent as email attachments, opened from the attachments and then Save As with a new name to a different location.  So it might be a Save As problem.  I wanted to post this in case there are others out there scratching their heads and thinking it is just them.

    Sorry for the senior moment comment.  I was following onto your mention of that phrase.
    If you go into File > Open Recent > More… you can select files you have touched Today, Yesterday, Past Week…
    Selecting a file and doing a Save As… should point to the folder where the file went.
    Does this work for you to find the file?

  • Space Designer Save Setting Problems

    Space Designer Save Setting Problems
    On the right side of the space designer you have "dry" and "rev" settings.
    On reopening the plug-in the dry setting switches back to zero, although I saved it at a different setting...
    Everytime, every project...

    Does it do this on audio/software instrument channels and aux channels?
    In general, when you load SD on an aux channel, Logic assumes it's going to be an FX return and so "helps you out" by setting the dry level to zero for you...
    On other channel types it should work as expected...

  • Save as in Maverick

    Is there a way to "save as" in Maverick?  Why would they disable ths feature. I create invoices in Numbers every week using the prior week as a template. Sometmes only the date changes and then I click save as and rename the invoice for that week. Now I have to create a new invoice from scratch every week. Huge fail.

    Hold an option key while selecting the File menu. Duplicate will change to Save As...

  • Save As under Maverick is very slow showing folders path

    I've noticed after updating to Maverick that when I click on "Save As", it takes a long time (10-20 sec.) for the file pathways to show up in the Save As window. Is anyone else having this problem?  I've tried re-booting but that doesn't help.  Thanks in advance.
    Marty

    I had the same problem. I also occured when I clicked on the title on top of a window to rename or move a file. Therefore I suspeced it´s the new extended tagging functionality in Mavericks which caused this annoying bug.
    After eliminating all these tags from the sidebar in the finder preferences the problem was solved for me.
    @apple and others: the former menu, which appeared by clicking on the title of a window was much more charming and in my opinion much more usable. The window appearing in Mavericks seems to be more restrictive and less intuitive. Is there a way to switch back to the old context menu?
    Regards
    Detlef

  • Big Problem: Maverick on dual screen hide everything in between.

    I'm using Maverick for the first time, i cannot see documents or folders or even the safari's window in the middle of screens, they just hide half window so that i can only see half window on one sceen at a time. I was trying to align screens and to get that i was use to move something between screen, in the middle, and i got this problem as i need to see a lot of files that way, using 2 screens in the same time per one file or folder i mean.
    Anyone has the same problem, any help please? thank you in advance.
    PS: Sorry for my english, i hopethe issue it's clear.

    I had a similar issue. My Mackbook Pro with an extra monitor connecetd with mini DVI port. I had Photoshop tools and menus on my laptop and the photos on the extra screen. When I was fixing a photo the extra monitor showed some weird behaviur so I decided to save my work. It was amazing my laptop went into freezing and finally it went off, It restarted but it did not pass through the Apple sign and the small gray wheel. I tried to use HD Recovery and it was the same. Finally I solved it using the "T" Target mode with another Imac. Is it possible to solve it with the tip you mention here of the "spaces"?

  • Macbook pro startup problems, Mavericks and Yosemite

    2011 MBP
    OK I am an idiot for trying to update to Yosemite which basically killed my laptop. After a long time of trying everything I eventually deleted and reformatted the hd and reinstalled maverick + data from Time Machine (via internet recovery). But still the problem seems to persist more or less identically after working ok for some hours.
    I opened up the laptop this morning and the screen was just blank and I couldn’t restart (just got the grey screen). I can open up in safe mode but there is some very strange behaviour. At the moment the screen is divided in half with the r side on the L and the L side on the R. This is new, no weird screen issues before (except the grey screen on startup).
    I have tried internet recovery again to use disc utility, the disc verifies fine. There is something strange going on with the permissions though - 2 permissions need repairing and I repair them but when I re-verify they need repairing again. I have repaired them about 10 times now but have no idea if they are connected with my problems or not.
    Anyway I am at a total loss to know what is wrong or what I can do about it and getting desperate (I need to work!!). Any ideas?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Acrobat Reader Versions and saveAs, exportXFAdata Problems

    We use generate Forms with Reader Extension Save enabled.
    The forms are then opened within Acrobat Reader. In the onClose Event a Script called "saveXMLData" is called. This script is install in the javascript folder of the reader installation.
    The script :
    var saveXMLData = app.trustedFunction(function(doc)
         app.beginPriv();
         doc.saveAs({cPath:"/c/windows/temp/savedForm.pdf",
              bCopy: true,
              bPromptToOverwrite: false });
         doc.exportXFAData({
              cPath:"/c/windows/temp/savedForm.xml",
              bXDP:false
         app.endPriv();
         return;
    Using Acrobat Reader 7, eveything worked fine.
    Using Acrobat Reader 9 "saveAs" crashes the Application after the document is saved and the filled in Data is not saved.
    Without the saveAs function, at least the export File is generate but the data that where filled in are missing.
    Using Acrobat Reader X "saveAs" crashes the Application as well. Leavin out the saveAs function, the export File is generated as expected. Thus the filled in data values are saved.
    Using Acrobat X Pro everything works as with Acrobat Reader 7.
    Our Problem is that the customer uses Acrobat Reader 9. Are there expected incompatibilities with the different versions. Does anybody know any workarounds, settings?
    By the way disabling extended security does not help.
    Thanks
    Max

    It cannot be a problem of the installation, because at least Windows 7
    was a fresh install with nothing but Reader additionally installed.
    By the way, what do you mean by "risky", I followed straight the
    documentation from Adobe, where one is allowed to place function calls
    requiring a privileged context.
    Have you any better idea where to place the call to save? It must be
    called automatically, when the User closes the window, no additional
    interaction is possible.
    One other thing is the call to exportXFAData, have you any idea why
    there is a difference in behavior between reader version 7 / 10 and 9?
    I wrote that in version 9 the user entered data is missing.
    Am Donnerstag, den 21.07.2011, 05:53 -0600 schrieb try67:
    No, it doesn't work.
    Sorry, I don't have any ideas except for trying to repair the installation
    of Reader.
    However, placing code in the WillClose event is considered risky and should
    be avoided if there are alternatives available.
    >

  • Save file problem in network hard disk

    I connect to network hard disk called X:
    When i open a pdf file in X: and change something to save.
    A message will tell me "Files can not be saved, can not be saved to this file name, use a different name or save this file in another folder"
    But if I use \\192.168.0.1 connect to network hard disk.
    And do same thing to save file.
    It can save success.
    Anyone have same problem?
    Thanks.
    OS: win 7 professional SP1
    Adobe Reader 11.0.10

    Hey YaoTingHuang,
    Please try saving any other PDF file to the same folder location and check if the same message appears.
    Let me know what happens if you disable protected mode under Edit> Preferences> Security (Enhanced) and uncheck 'Enable protected mode at startup'
    Hope to hear from you.
    Regards,
    Anubha

  • Forms save message problem!

    Um working in forms 9i.
    I have set SeprateFrame = True in the configuration file, so that the forms applet opens up in a new window.
    Now there are two BROWSER windows...one, in which user types the URL of the Forms server and Second, in which the forms applet opens.
    I can close the form without getting the default Forms "Do u want to save the ....?" message (by clicking the cross button on the APPLET inside the BROWSER)if there are any pending changes in the data block with a form level When_Window_Closed trigger using Exit_Form(No_Validate). But the problem starts when there are pending changes in the form and I directly press the cross button on the BROWSER which encloses the APPLET. I get the same annoying Forms message "Do u want to save?".
    Could somobody tell me how to control the BROWSER window enclosing the APPLET, because all the forms triggers are related with forms only and one have no control over the BROWSER.
    Please help.

    hi
    try this.
    BEGIN
                   /* ** Force validation to happen first */
                   Enter;
                   IF NOT Form_Success THEN
                        RAISE Form_Trigger_Failure;
                   END IF;
                   /* ** Commit if anything is changed */
                   IF :System.Form_Status = 'CHANGED'
                        THEN
                        Commit_Form;
                        /* ** A successful commit operation sets Form_Status back ** to 'QUERY'. */
                        IF :System.Form_Status <> 'QUERY' THEN
                             Message('An error prevented your changes from being committed.');
                             Bell;
                             RAISE Form_Trigger_Failure;
                        END IF;
                   END IF;     
    :system.message_level := '10';
    COMMIT_FORM;
    :system.message_level := '0';
    if
    :system.form_status != 'CHANGED'
    then
    -- go_block('block');
    else
    Message ( 'Your entered data could not be saved. Please check the form.' );
    Message ( ' ' );
    end if;
    end; -----
    On-Message trigger (Form Level)
    begin
    if
    abs ( message_code ) = 40400
    then
    clear_message;
    bell;
    message ( message_text, no_acknowledge );
    else
    message ( message_text );
    end if;
    end;
    Sarah

  • NormalEmail.dotm pop up 'save as' problem, citrix server

    Hello,
    Problem:
    When sending a Word document as a PDF (File -> Save and
    Send -> Send as PDF) via Outlook.  A continuous prompt
    of  'Save As' shows up trying to save the NormalEmail.dtm file to the users profile.  The email sends but this pop-up occurs every time.
    Our Environment:
    Citrix user profile management.
    Outlook 2010
    Word 2010
    Temp Fix:
    Deleting normal.dotm and normalemail.dotm under C:\profiles$\%username%\AppData\Roaming\Microsoft\Templates
    Copying our default NormalEmail.dotm file to that location.
    This is a solution until the user logs off and back onto the citrix server refreshing their Email Profile (Unpacking/Unloading)
    Searching through the forums, people mentioned outlook addins, but running the Outlook client in Safemode offered no solution
    Thank you

    Hi,
    Please open your Registry Editor and check on the AppData registry value to see if it is set to a value date other than %USERPROFILE%\AppData\Roaming. If so, try changing it back to %USERPROFILE%\AppData\Roaming and then test the issue again.
    If above doesn't work, we can also try adding the following registry key to see if it helps:
    HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\Addins\Microsoft.OutlookBackup.1
    DWORD: RequireShutdownNotification
    Value: 1
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Save button in Maverick's Mail ?

    The older versions of Mail, previous to Mavericks (don't recall how it was in Mountain Lion), had a Save (or Save as Draft in older Mail versions) in the bar at the top of the window when composing an email. I know it appears that Mail now saves the messages as a draft routinely, but I also like to explcitly save them myself just in case. There does not seem to be a way to get that back, i.e. no settings anywhere to customize it so you can get a button for Save. Am I missing something or is it really unecessary, i.e. the drafts are saved continuously.
    Thanks,
    Nick

    Totally understand.
    I don't want to derail the whole subject of this thread, but it is quite telling that many Apple proponents that I know on a personal basis and who I work with share our views. I  have been using Apple products since writing my thesis on one of those two-mouth Macs back in the 80's. The company has always represented what I cherished - doing what works best and not following a trend. I see that concept fading. Besides using and preferring Apple products for both work and personal acitvities, I am also a significant Apple shareholder having owned hundreds of shares since they were valued in the teens - and I still do. So I am saddened to see the direction the OS's are going. Personally, it is a battle for me regarding holding onto the shares due to the fact that they are a profitable company and balancing that against my perceived notion that they are going in a direction contrary to what was the company's strength. Like I said, I would prefer to still value them more as  company that gives us what we need for using the computer as a computer and not as an accessory. That might not be the best fiscal evaluation, but it is hard to change what I truly need in an OS.
    I guess it is like the devaluation of music.  As a society, we have been willing to give up too much in terms of sonic fidelity for ease of use. That is something we may never recover from. I have known at least two people who gave up their CD collectiions because they saved the music in digital format but neglected to do it in the highest, recorded resolution. They then sold their CD's. Only later did they  realize what they lost. But many people would have never realized the loss of fidelity because they listen on iPods, iPhones or whatever. Its a bit sad.  Anyways, I promise now to get off of my soapbox.  :-)

  • Save project problems

    Hi, I'm pretty new to TopLink and am having problems saving my project after mapping attributes one to many. I've included the stack trace below - the problem happens if I simply click the one-many icon and try and save.
    Any help would be much appreciated!
    Thanks,
    Ewan Benfield
    Throwable Class Name:
    oracle.toplink.exceptions.QueryException
    Message:
    EXCEPTION DESCRIPTION: The object [BldrClass[2b74bd] (java.util.Vector, modifier = public , array=, implements [BldrClass[c1f5f] (java.lang.Cloneable, modifier = public abstract , interface, array=, implements []), BldrClass[1d39] (java.io.Serializable, modifier = public abstract , interface, array=, implements []), BldrClass[39e891] (java.util.List, modifier = public abstract , interface, array=, implements [BldrClass[ff7d3] (java.util.Collection, modifier = public abstract , interface, array=, implements [])])], extends AbstractList)], of class [class oracle.toplink.workbench.model.meta.BldrClass], with identity hashcode (System.identityHashCode()) [2,847,933],
    is not from this UnitOfWork object space, but the parent session's. The object was never registered in this UnitOfWork,
    but read from the parent session and related to an object registered in the UnitOfWork. Ensure that you are correctly
    registering your objects. If you are still having problems, you can use the UnitOfWork.validateObjectSpace() method to
    help debug where the error occurred. For more information, see the manual or FAQ.
    QUERY: WriteObjectQuery(BldrClass[2b74bd] (java.util.Vector, modifier = public , array=, implements [BldrClass[c1f5f] (java.lang.Cloneable, modifier = public abstract , interface, array=, implements []), BldrClass[1d39] (java.io.Serializable, modifier = public abstract , interface, array=, implements []), BldrClass[39e891] (java.util.List, modifier = public abstract , interface, array=, implements [BldrClass[ff7d3] (java.util.Collection, modifier = public abstract , interface, array=, implements [])])], extends AbstractList))
    Stack trace:
    LOCAL EXCEPTION STACK:
    EXCEPTION [TOPLINK-6004] (TopLink - 9.0.3 (Build 423)): oracle.toplink.exceptions.QueryException
    EXCEPTION DESCRIPTION: The object [BldrClass[2b74bd] (java.util.Vector, modifier = public , array=, implements [BldrClass[c1f5f] (java.lang.Cloneable, modifier = public abstract , interface, array=, implements []), BldrClass[1d39] (java.io.Serializable, modifier = public abstract , interface, array=, implements []), BldrClass[39e891] (java.util.List, modifier = public abstract , interface, array=, implements [BldrClass[ff7d3] (java.util.Collection, modifier = public abstract , interface, array=, implements [])])], extends AbstractList)], of class [class oracle.toplink.workbench.model.meta.BldrClass], with identity hashcode (System.identityHashCode()) [2,847,933],
    is not from this UnitOfWork object space, but the parent session's. The object was never registered in this UnitOfWork,
    but read from the parent session and related to an object registered in the UnitOfWork. Ensure that you are correctly
    registering your objects. If you are still having problems, you can use the UnitOfWork.validateObjectSpace() method to
    help debug where the error occurred. For more information, see the manual or FAQ.
    QUERY: WriteObjectQuery(BldrClass[2b74bd] (java.util.Vector, modifier = public , array=, implements [BldrClass[c1f5f] (java.lang.Cloneable, modifier = public abstract , interface, array=, implements []), BldrClass[1d39] (java.io.Serializable, modifier = public abstract , interface, array=, implements []), BldrClass[39e891] (java.util.List, modifier = public abstract , interface, array=, implements [BldrClass[ff7d3] (java.util.Collection, modifier = public abstract , interface, array=, implements [])])], extends AbstractList))
         at oracle.toplink.exceptions.QueryException.backupCloneIsOriginalFromParent(Unknown Source)
         at oracle.toplink.publicinterface.UnitOfWork.getBackupClone(Unknown Source)
         at oracle.toplink.publicinterface.UnitOfWork.getBackupCloneForCommit(Unknown Source)
         at oracle.toplink.queryframework.ObjectLevelModifyQuery.prepareForExecution(Unknown Source)
         at oracle.toplink.queryframework.WriteObjectQuery.prepareForExecution(Unknown Source)
         at oracle.toplink.queryframework.DatabaseQuery.execute(Unknown Source)
         at oracle.toplink.publicinterface.Session.internalExecuteQuery(Unknown Source)
         at oracle.toplink.publicinterface.UnitOfWork.internalExecuteQuery(Unknown Source)
         at oracle.toplink.publicinterface.Session.executeQuery(Unknown Source)
         at oracle.toplink.publicinterface.Session.executeQuery(Unknown Source)
         at oracle.toplink.internal.sessions.CommitManager.commitAllObjects(Unknown Source)
         at oracle.toplink.publicinterface.Session.writeAllObjects(Unknown Source)
         at oracle.toplink.publicinterface.UnitOfWork.commitToDatabase(Unknown Source)
         at oracle.toplink.publicinterface.UnitOfWork.commitRootUnitOfWork(Unknown Source)
         at oracle.toplink.publicinterface.UnitOfWork.commitAndResume(Unknown Source)
         at oracle.toplink.workbench.ui.BldrSession.saveProject(Unknown Source)
         at oracle.toplink.workbench.ui.BldrMainView.saveProject(Unknown Source)
         at oracle.toplink.workbench.ui.BldrMainView.saveSelectedProjects(Unknown Source)
         at oracle.toplink.workbench.ui.BldrActionManager$104.actionPerformed(Unknown Source)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.AbstractButton.doClick(Unknown Source)
         at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source)
         at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Window.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)

    Hi Darren,
    Thanks for the reply. No, it doesn't have neediness icons. Saving into a new, empty folder doesn't work and I now have two actions which cause a project that did save to stop saving:
    1. Make a particular field 1-many and fill in the descriptor ( which works in generated code)
    2. Generate a particular new class, specify primary key, and save.
    I've been using TL for ten days or so without other problems - but the project saving is beyond me so far!
    One can't reload Toplink from the XML files/ descriptor file rather than the project file perhaps?
    Ewan

  • Chris Lord save as problems with actions

    Hi..I have been experiencing a frustrating problem. When running an automated batch action which ends with a 'save as' command to a 'action completed' folder, the files keeps overwriting the previous files in the batch and retains name of the first file processed by the action.
    Other actions I have created never had this problem, but all of a sudden it simply refuses to save the individual files without overwriting the previous one.

    Are you setting the batch dialog to override save as steps. also when recording save as steps in actions its best to use the file type pull-down menu to set the file type and not to set the name just take the default so no name is recorded in the action step. Expand your action's save as step make sure no file name has been recorded into the step.

  • Photoshop File Save as problem

    buenos dias:
    mi problema es que descargo photoshop y lo instalo en mi portatil acer one con xp
    y puedo trabajar una fotografia normal pero cuando voy a archivo guardar como...
    esta opcion no funciona ¿que debe hacer? gracias por la ayuda

    DIDIER´s wrote:
    Good day:
    My problem is that I download photoshop and install it on my laptop acer one with xp
    and I can work a normal photo but when I go to file save as...
    This option does not work is that to do? Thanks for the help
    Does your laptop have a screen with a resolution of at least the minimum required 1024 x 768 pixels?  If not, Photoshop will not be able to display the File - Save dialog.
    -Noel

Maybe you are looking for