Save as Reduced Size PDF and Save as Optimized PDF do not reduce the file size. What gives?

Save as Reduced Size PDF and Save as Optimized PDF do not reduce the file size. What gives? I used Acrobat 9 to do this for a long time. I recently received new laptop loaded with with Acrobat 10 and it does not work the same. I typically scan 8-10 pages of receipts, combine the files in Acrobat, and then optimize to reduce the size so I can upload with my expense report. Typically, my files were reduced to 200-400 KB. I have a 2 MB file that will not reduce at all.

Bernd, thank you for your attempt to help but the option dialog windows do not contain the same options. There are numerous other posts on this forum about this issue and there is no answer. Clearly, there is an issue. I have submitted this issue to our internal help desk.

Similar Messages

I want to upload a Banner to my iTunes U page. The banner file has all the requirements like as, kind, size, frame, and etc. Infortunately, I could not upload the file. It does not show in Provider Page Configuration or the preview. Someone could help

I want to upload a Banner to my iTunes U page.
The banner file has all the requirements like as, kind, size, frame, and etc.
Infortunately, I could not upload the file. It does not show in Provider Page Configuration or the preview.
Someone could help me?

Sounds like a driver issue. I never tested in bridge, so I could be wrong. But it sounds to me that when you are connected to that screen, your settings are not set to the full resolution of that screen.

When i try to download firefox onto this computer, It downloads and says run or save. I click run and it says that it can not create temporary files. How do i fix this?

I try to download firefox but it comes up with a error message saying it can not create temporary files.

Beginning with Firefox 4, Macs must have an Intel x86 processor ('''''yours is a PPC Mac''''') '''''<u>and</u>''''' OSX 10.5 or higher ('''''which you do not have''''').
*System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8] [https://www.mozilla.org/en-US/firefox/9.0/system-requirements/index.html Firefox 9]
'''''The good news''''' is that Firefox 3.6.x still supports OSX 10.4 and Macs with the PPC Mac architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
*System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
*Download Firefox 3.6.x: https://www.mozilla.org/en-US/firefox/all-older.html
*Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
You can try the third-party product '''''TenFourFox''''' that supports PPC Macs with OSX 10.4.11 and OSX 10.5.8. Firefox 9 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
*Home page: http://www.floodgap.com/software/tenfourfox/
*Developer's blog: http://tenfourfox.blogspot.com/
*'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/ReleaseNotes90
*'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

In iMovie when I try to share a project to a file on an external hard drive it will work the first time but subsequently it says it is sharing but gives no time and file name and in fact just sits there not sharing the file.

I have iMovie 10.0.4. I want to transfer some old DV tape videos to MPEG 4 files to be stored on a 4 TB external drive. I successfully imported the video to iMovie, created a project by moving all captured files into a project and the first time I shared the project to a file it worked as expected. Every subsequent try to transfer another video would fail to transfer. When I clicked save it gives the warning that it is too big for iCloud, iso I click create on this computer. The progress circle comes up with no indication of progress. The show activity drop down just says sharing to "file" no file name as in the first one and indicates no time remaining. In fact it just sits there apparently doing nothing. I'v tried it a half dozen times, deleted everything and started over. It transfers the first project to file and then nothing on additional tries. What do I have wrong, am I missing something?

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

Where can I find the file size of an image?

In PS CS4, when you hover the mouse over an image, one that I have that is sized as a 5x7 at 200 ppi, it shows 933 kb.
When I open the file, and look at the lower left of the screen, it shows a "Document Size" of 4.01 mb.
The correct size is 933kb, because it's from a D200 10MP Raw file, converted into jpg, then downsized to the 5x7 at 200 ppi. Default sizes are basically 13x19 at 200 pp (which shows up as a Document Size of 28.7 mb).
What is a "Document Size" (I think it's the actual dimension area, not pixel size), and why, when the image is open, can I not see the actual file size of 933k anywhere?

jeff bach wrote:
In PS CS4, when you hover the mouse over an image, one that I have that is sized as a 5x7 at 200 ppi, it shows 933 kb.
You mean in Windows Explorer window? Photoshop will not show you such information.
jeff bach wrote:
What is a "Document Size" (I think it's the actual dimension area, not pixel size),....
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7508a.h tml
.. can I not see the actual file size of 933k anywhere?
No you can not. You may plan to save it as jpg with any amount of compression that will greatly influenced the file size and Photoshop is not that much intelligent yet to guess your plans :-)

Why are the file sizes of exported jpegs so small?

I shoot raw, studio portraits mostly. I import to Lightroom 5 as DNG and then edit. Upon exporting as jpegs, the file sizes end up way too small, some of the cropped and/or black & white conversions as small as 560 KB, even with slider to 100%. Un-cropped color photos are ending up from 1.5 to 3MB. What am I doing wrong?

Jim,
Thank you for your response. I think some of the difficulties in this thread are that there have been more than one person reporting issues, which may or may not be exactly the same or different from the initial one reported by the original poster. Then, anyone else commenting can easily intermix bits and pieces from any or all of the other posters interrelated issues. Also, I should have added to my last response in clarification what I meant about the overall dimensions. I was referring specifically to inches, not file size, not resolution.
My very first post was a thank you to Rusty's post for his comment about how he had noticed his Resolution setting had been changed from ppi to ppcm. I didn't say anything about printing. In fact, I never even stated what my issue was. I was merely thanking him for sharing information. So, for anyone to tell me that I didn't know what my issue is, that I didn't understand was quite laughable to me. And then the other two posters were almost equally ridiculous, who said that since they didn't experience the same conditions as myself and another person, it couldn't be a programming error.
Trust me, I understand explicitly about resolution, image size, dimensions, file size and how they are all interrelated. Resolution is essentially the density of pixels. (And I'm still used to dpi vs ppi, that's how long I've been working with the concept.) I often help other people understand in whichever mode is most comfortable for them to grasp the knowledge of how to know what size image they need/want to capture and print depending on the types of measurements shown on their equipment used and by whomever they might be working with for finish work.
I have a set process, I have set image sizes, I have an action recorded in Photoshop to shrink my images to 24" x 36" and save them in the proper folder with the proper name and another to shrink them to 8" x 12" and place them in the proper folder with the proper name. I am meticulous, so when the first image imported into Photoshop and it was 18.898" x 28.346", un-cropped, I couldn't figure it out. The file size was still just as large, the resolution was still 72, I hadn't changed any settings in Lightroom or Photoshop, the ONLY thing I had done was install an update. It didn't make sense to me that with the pixel dimensions still being the normal size, all of the sudden the inch dimensions were smaller. And I did need to be able to have the capability for a larger print size if/when I do want to print.
I hope that I'm being clear now. I really was just trying to post a thank you initially. I hadn't expected all of this excess.
I apologize for the troll statement. It wasn't meant for you directly, it was more for the grouping of comments which in my opinion didn't seem to be useful for the discussion and were instead just baiting. I shouldn't have allowed my bad mood to permeate my own comment regardless. I am also sorry for any other statements I made which might have come across wrong. I was trying to be funny with my first comment about programmers, but it might not have come across that way. I hadn't expected the rude and unnecessary comment back which I received, and that's where the trollish comments came from. That's why I only responded to that person once, despite the string of poking posts.

Do Leopard icons increase the file size?

In programs like Photoshop you have the option of including a preview or a thumbnail icon for the image you’re saving. This is important to know because, if you are making a web page or trying to fit as many files as possible on a disk, you want the file sizes to be as small as possible, and you do not want the images saved with a thumbnail icon or preview.
In Leopard, in list and icon views, I noticed that the files have an icon whether you had these settings turned on in Photoshop or not. How does this work? Are those icons in the finder being embedded into the file or is Leopard some somehow generating them “on the fly” and not increasing the file size of the individual images? Does Cover Flow work the same way, and generate the previews on the fly rather than embedding anything into the images?

Unless you've given a file a custom icon, through the Finder, Photoshop, or another method, the icons are generated elsewhere in the system and aren't part of the file itself.
(29473)

I have been given a 28 page Pdf and have been asked to optimize the item to reduce the file size. Can this be done in Photoshop Elements? if so how?

I am using a Mac and just bought Photoshop Elements 13. I have been given a 28 page Pdf and have been asked to optimize the item to reduce the file size. Can this be done in Photoshop Elements? if so how?

No the pages will open as separate documents in Expert Mode. You really need Acrobat or possibly you could copy and paste the contents into MS word. Then re-save as PDF.

Save as PDF and Save PDF as PostScript options in the Printer dialog are not supported.

I downloaded Indesign CS3 trial and liked everything about it until I attempted to print to postscript and got that message. Nothing I have tried has helped. I have seen in various forums that others are having the same problem, but haven't found any solution offered. I am running Tiger 10.4.10 on a new Intel Imac with 3G ram. This is a procedure I use very often in my workflow, and have never had this problem with CS2 on my PC or other Macs. Is there a solution? I downloaded the .1 update and installed that and it didn't change anything.

PLEASE SOMEONE HELP ME.
Its the first time Im using print booklet option to save my file. I have the same problem when trying to save as pdf and get the
"The Save as PDF and Save PDF as PostScript options in the Printer dialog are not supported."
I'm trying to save a .pdf of a booklet of a facing pages document of A4 size each facing page for a whole size A3, then hope to let the pages be correctly arranged by inDesing, then print and staple.
Meaning pages will be like this - Page #60 left side [of the A3] - page #1 right side [of the A3] , page # 2 right side[of the A3] - page #59 left side[of the A3] etc...
I CANT DO IT. I tried to follow Melvin Thompson , but when I choose save .ps and open it in preview all I see is independent a4 pages and just the left ones , .. How can I save my file as .pdf ready to be printed in a3 ?
I really appreciate any help.

When downloading a file from google drive and save in my phones document directory,the file size is compressed. Why?

I have downloaded files from "Dropbox" and save in phones document directory,After downloading in document directory,the size of the download file is same as the actual size in dropbox. I can also open it from document directory.Everything is ok. But when I follow the same process for google drive files, the file size is compressed(if actual size of file is 1.2Mb the download file size is 61Kb). So I can not open it from document directory.So, How can i download the actual size of the file in document directory? I am using google api objectivec client for google drive.
Thanks in advance.

If an iphone were to try to download a full size document ot photo, it woul overload its own ram, and crash, resulting in a laggy iphone. Therefore it is compresses

Open all pages in a PDF and save them as sequential files

I'm trying to make a script that will open all pages in a multi-page PDF and save them as sequential files, but I have had no luck with the simple script in the "Adobe Ilustrator CS5 Reference: JavaScript".
there example to open a PDF to a designated page does not work for me in Illustrator CS 5.
// Opens a PDF file with specified options
var pdfOptions = app.preferences.PDFFileOptions;
pdfOptions.pDFCropToBox = PDFBoxType.PDFBOUNDINGBOX;
pdfOptions.pageToOpen = 2;
// Open a file using these preferences
var fileRef = filePath;
if (fileRef != null) {
var docRef = open(fileRef, DocumentColorSpace.RGB);
if anyone can get me on the right path it would be appreciated.

Hi DuanesSFK,
you can open a PDF page on this way (tested with CS3 and 5):
//OpenPDFpage2.jsx
var uILevel = userInteractionLevel;
app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;
// Opens a PDF file with specified options
var pdfOptions = app.preferences.PDFFileOptions;
pdfOptions.pDFCropToBox = PDFBoxType.PDFBOUNDINGBOX;
pdfOptions.pageToOpen = 2;
// Open a file using these preferences
//var fileRef = filePath;
var fileRef = File("~/Desktop/YourOwn.pdf");
if (fileRef != null) {
var docRef = open(fileRef, DocumentColorSpace.RGB);
app.userInteractionLevel = uILevel;
To open all pages you have to loop through all pages etc.
Easier for you:
Search here in forum for the "open pdf" script (I don't know the exactly name, it was written by CarlosCanto, ) This should always work for you.
Have fun

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

Non-destructive editing is an important feature of iMovie HD 6.
iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

My hard drive died last week, and I needed to install a new one. Previously, I was able to save a .doc with text and inserted photo to .pdf and then to .jpg. Now I can get the .pdf but can't determine what to do to convert to .jpg. Does anyone know ?

My hard drive died last week, and I needed to install a new one. Previously, I was able to save a .doc with text and inserted photo to .pdf and then to .jpg. Now I can get the .pdf but can't determine what to do to convert to .jpg. Does anyone know ?

Rather than do that, which means starting over from scratch, losing all your edits, organisation and so on, why not simply use iPhoto Library Manager to revert the Library to the older version? Easier, less destructive.
The instructions on that are here
If you really want to start over: you can access the Originals folder simply by going to your Pictures Folder and finding the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.

When I Print a Document to PDF and Save a PDF the format displays differently.

We use PDF with Microsoft Dynamics GP. When we Print a document to PDF the format of the form is fine. When we SAVE a document to PDF the format is off. We believe we have ruled out application issues.

We are opening the document with Adober Reader. The same Application was used for both documents.
This image was printed from the Application to a PDF and opened in Adobe Reader.
This is the same document from the same application, but when we SAVE to a PDF the format of the gridlines is off.

Do i need acrobat pro to open a pdf i created in quark and reduce the file size?

do i need acrobat pro to open a pdf i created in quark and reduce the file size?

i'll try that! thank you.
Daniel Flavin <mailto:[email protected]>
June 24, 2014 at 3:23 PM
>
do i need acrobat pro to open a pdf i created in quark and
reduce the file size?
created by Daniel Flavin
<https://forums.adobe.com/people/Daniel+Flavin> in /Creating, Editing
& Exporting PDFs/ - View the full discussion
<https://forums.adobe.com/message/6493113#6493113>

Save as Reduced Size PDF and Save as Optimized PDF do not reduce the file size. What gives?

Similar Messages

Maybe you are looking for