Save As Stationery - Does Not Work

Anyone having problems saving files as stationery in Mail 3 ?
I create a new message like help says and the save as stationery under the file menu is grayed out.
Has anyone had any success altering and saving new stationery files?
Thanks

I wrote a web page about how to do stationery with the previous editions of MAIL. It's a simple, three-step process, and still works with the new Stationery in Leopard's MAIL. As mentioned in many posts, the Save as Stationery feature doesn't work like we would want. To save a fancy stationery document you have made, just follow the directions on the following web page.
http://web.mac.com/jaharrismd/TonysMac_Hints/List_of_Articles/Entries/2006/2/21_MAIL_-Stationery.html

Similar Messages

Save as default does not work

Pages 09 constantly defaults to US Letter. I've tried to change to US Letter Borderless but the 'Save as Default' on Page Setup does not work. I've reloaded Pages to no avail.
Any tips, tricks or suggestions?

Is it an already saved document you are having problem with or one of the templates? How do you know that it doesn't default to Borderless? But when I try on Snow Leopard it doesn't remember borderless either.

Save for previous does not work

In LabVIEW 7, there is no possibility to save for a previous version. The reference to "Save with options" in file menu, given in Help, leads nowhere. I have also tried to save programmically, using method "Save for previous", but it did nothing (and did not say anything in the Warnings or Error).
What to do?

> In LabVIEW 7, there is no possibility to save for a previous version.
> The reference to "Save with options" in file menu, given in Help,
> leads nowhere. I have also tried to save programmically, using method
> "Save for previous", but it did nothing (and did not say anything in
> the Warnings or Error).
> What to do?
Can you be more specific? Save with options has six options listed on
the left side. The next to last in LV7 should allow for saving the
LV6.1. Really, you should just have to click that radio button and if
you aren't using any toolkits, you click save and choose a folder for LV
to place the VIs into -- it does this trying to avoid saving over the
originals. If you need the VIs for versions before 6.1, load into 6.1
and go furthe
r back into time. In general, each LV release will save
back to the previous major release.
Where in this sequence do you run into a problem?
Greg McKaskle

Jpeg "save as copy" does not work

in CS3, after i'm done adjusting an image with layer and mask, etc, and I go to save it as a jpeg, it automatically attaches "-copy" to the name. I try to do this in CS5 and it doesn't work even though "save as a copy" is checked by default. I have to manually change the file name otherwise it will ask if i want to overwrite the original jpeg and that gets annoying when working with lots of files. Is this a bug? or is there an easy fix?
thanks much

Edit - I just tried this with CS5 and I do get " copy" added to the end of my file name for all but JPEG.
I'll bet this has something to do with the new feature where you can Save As a JPEG (as a copy) even if you're editing a 16 bit document.
-Noel

"Save for Web" does not work with mac OS 10.6

Everything else runs fine with PSE 6 and OS 10.6, but nothing (!) happens when choosing "Save for Web" (German Version).

Here are the directions for PSE 6 in general:
http://forums.adobe.com/thread/422596?tstart=30
and for save for web:
Finally, to make the Save For Web work, you must do the same thing as above (which is make a folder owner be a non-admin account, and fix the read/write so that in 10.4 the You can says Read & Write). The folder to change with the "command i" get info is :
/Library/Applications Support/Adobe/Photoshop Elements/File Agent/6.0/en_US.
Once this en_US file is owned by a non-admin account and the Read & Write is set, and the padlock is unlocked, the Save For Web works.

"Save all" attachements does not work for me... :(

I cannot save all attachements...
The only first is saved...
Do you know what happened?
In earlier versions of OS (Lion, Maverics, etc.) it works perfecly...
Tomasz

And only first one is saved... :-(

In adobe 9.5 reader. File/save as text does not work.

I have adobe 9.5 reader. If I do file/save as text I always get an empty .txt file. What is wrong?

It looks like you are correct! They do appear to be scanned pages, but the icon that shows bfore the file name is Adobe & if I try to use the Open with option only Adobe is allowed. No wonder it confused me. Thank you for your help!

Save app tabb does not work

The tabbs that i pinned as apps are not saved when i close firefox.
When i open firefox again, they dont show up in the taskbar.

Is it an already saved document you are having problem with or one of the templates? How do you know that it doesn't default to Borderless? But when I try on Snow Leopard it doesn't remember borderless either.

"Always ask me where to save files" does not work.

Summary: The "Always ask me where to save files" feature does not work. No dialog box comes up, apparently because the browser is stuck on a bad old read-only lastDir location, in a prefs.js file that I can't edit.
Details:
I am using Firefox 30.0 on Mac OS 10.6.8. My Mac has a both a read/write Mac partition that I use most of the time, and a bootcamp Windows partition drive ("C"), which I can read but not write to.
At some point I accidentally tried to download a file from a site, using Firefox, to the read-only Windows C drive. Ever since that time, I have not been able to download any files from Firefox, except to the firefox/downloads folder. This is inconvenient. If, in preferences, I try to set downloads to ""Always ask me where to save files", the dialog box does not come up when I actually try to save files. This problem does not apply to saving photos by right-clicking them.
If I open, in text-edit, mozilla/firefox/profiles/t4vockvue.default/prefs.js, which was saved yesterday, I can see a problematic line. It reads:
user_pref("browser.download.lastDir", "C:\\Documents and Settings\\[etcetc]");
C:\\Documents and Settings\\[etcetc] being the read-only windows directory.
This prefs.js is apparently not an editable file.
I tried to fix this by opening a browser tab in Firefox and opening about:config. The editable browser.download.lastDir does NOT show the same "lastDir"....it shows some directory that I successfully downloaded photos to, by right-clicking on a photo.
How can I fix this problem?
Thanks.

To confirm which profile folder is active when you are running Firefox, it is easiest to open it from inside Firefox as follows:
Sometimes the file that stores the customizations becomes corrupted and fails to update properly at the end of your session. You can rename the file and customize from scratch.
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
In the first table on the page, click the "Show in Finder" button (Windows: "Show Folder" button).
Hopefully you are using a separate profile folder on each OS.

Office 2010 MUI in Finnish and Save and Send function not working after upgrading to Lync 2013 MUI

Problem is as follows. Used to have Office 2010, Outlook 2010 and Lync 2010, everything was working. People used it in Finnish and seemly quite a many of them used the Talleta ja lähetä (Save and Send in Finnish) in Office products.
After upgrading Lync to 2013 version, with Finnish language pack installed with it, the Save and send does not work in Office 2010 if it is used with Finnish as display language. When you try to use it you get a Mapi error and reason is undefined or something,
hard to say what it is exactly in english as the error message is in finnish. On those machines if the display language is changed back to english the Save and send works as it should.
Any ideas?

The problem was caused by the Language Packs for Lync 2013 or Office 2013. Without them all works.
And if you want to just unisntall the 2013 lang packs, then you also need to repair install the office 2010 ones to make it work again.

When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the o

When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the original in my work folder. I need to know how to stop this from happeing and get it back to the way it has been working he last 6 months since i purchased this program.

Hi pissedadobeuser,
Does this issue occur with any particular web page?
Are you able to print the webpage to 'Adobe PDF' to convert it to pdf.
Which Browser version, OS version and Acrobat version are you using?
Regards,
Rave

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

I have tried to save a Pages document to a Word document but it does not work. Plse advice !

I have tried to save my Pages document into a Word document but I keep on running into trouble = it does not work ! Anyone can help me ?

mossenane wrote:
Name of Pages document is RoomscheduleSTAYATBROMMA#2-?
I'm afraid that your choice if names is the problem. Try "RoomSched2X", or similar, and let us know how it goes. If that works you can try some other names of your own choosing.
Jerry

Save a published Access services database site as a template with contents does not work

Hi
I have a Access site on the SharePoint. I wanted the site to be duplicated to another subsite, I then did the usual - save site as a template with contents and made a copy of it, however it does not work. I have been getting the error as stated below
error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'Default'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
However, it works if I make a local copy and publish it to the subsite? How does access services work on SharePoint and why the template option can't be chosen.

Hi cally, check the following links for possible solutions:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/1e2b77ba-4cfa-4aa3-97e4-b7b39fbd46fd/error-with-ssrs-report-that-has-a-sharepoint-list-data-connection-ssrs-r2-and-sharepoint-2010?forum=sqlreportingservices
http://blog.mikehacker.net/2012/05/16/sharepoint-2010-access-services-reporting-with-sql-2012/
cameron rautmann

Save Panel Image / Screen Image does not work as an Executable

The Save Panel Image / Screen Image does not work as an Executable. It looks like there is a conflict with the Path, since the Screen_Image.exe is launched as Screen_Image.vi. I've tried this function both ways with the path name change Screen_Image.exe AND Screen_Image.vi.

Any chance you might be able to post some code illustrating what you are talking about?
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Save As Stationery - Does Not Work

Similar Messages

Maybe you are looking for