Save As ... When did it first appear?

Obviously, Apple has choosen to drop the Save As ... feature.
I was wondering, when did this feature first show up?
As I recall, Cut, Copy, Paste and Undo first appeared with the original Mac (the 128K version). Although, I could be wrong. It might have been on the Lisa.
Was Save As ... a feature back then? I know I have a 512K Mac tucked away in it's Apple carry case, so I suppose I could see if it still boots up.

It's been around as long as I can recall which goes back to System 6.

Similar Messages

When did CAST first appear in the Oracle DB

I am trying to find out the earliest version of the Oracle database where the CAST() function was first supported. I have only been around Oracle since the 8i DB, and I know it is there.
Thanks.

I am talking about:
SELECT CAST(some_column AS some_other_data_type) AS column_alias

When Did Automator Stop Appearing When Folder Was Ctrl-Clicked?

Having upgraded/updated over the past year and not used Automator much, I have suddenly realised I can't summon it by ctrl-clicking a folder as I used to.
When did it disappear, why and is there an alternative method of launching it other than by placing an alias in the dock?

http://portableapps.com/forums/support/firefox_portable

I can't get my password manager working. It remembers passwords for websites but when I enter in a new password (because this had to be changed) or when I have a new username + PW that I wish to save, the password manager does not appear.

I can't get my password manager working. It remembers passwords for websites but when I enter in a new password (because this had to be changed) or when I have a new username + PW that I wish to save, the password manager does not appear.

If you updated your existing account then try logging out of it on the iPhone by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPad.
If you created a new account then you can log out of the old account and in with the new one as above, but any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can re-download its content and download updates to its apps.

With my new macbook I attempted to open an older spreadsheet and get the following error message: "This spreadsheet cannot be opened because ti is too old. To open it, save it with numbers '09 first" So how does one do this when I only have ver3.1?

With my new macbook I attempted to open an older spreadsheet and get the following error message: "This spreadsheet cannot be opened because ti is too old. To open it, save it with numbers '09 first" So how does one do this when I only have ver3.1?

Numbers 3.x can only open Numbers '09 and later. You will need Numbers '09 to open Numbers '08 files.
If it is a single file (or only a few) you can email me and I will open and convert then email back. My email address is in the "Biography" of my profile.
You may have Numbers '09 installed. Look in the folder "/Applications/iWork '09" if Numbers is in that folder launch it, open the file you tried to open, and save. Then you should be able to open in Numbers 3.x

How do I get firefox to save tabs when I quit the program? This doesn't appear to be available in 4.0

On previous firefox version, when I quit the program, a prompt would ask me if I wanted to save tabs. That doesn't appear to be happening with 4.0 upgrade. Can I still save and quit?

One change in Firefox 4 is to by default stop Firefox displaying the warning message, but it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''

When i switch on my macbook its icon first appears smallers then gets bigger and the place where we enter the password.......that page looks like over zoomed. Please help tell what to do????

when i switch on my macbook its icon first appears smallers then gets bigger and the place where we enter the password.......that page looks like over zoomed. Please help tell what to do????

Reset PRAM. http://support.apple.com/kb/PH18761

Pages 5.1 error "This document is too old. To open it, save it with Pages '09 first."

When trying to open a Pages '08 file from a MacBook Pro in Pages 5.1 on an iMac, I get thr error message, "This document is too old. To open it, save it with Pages '09 first". I cannot locate a Pages '09 to use. I can export the file from Pages '08 into a Microsoft Word Doc file and can open it then. How I do I solve the problem and open files in Pages 5.1?

It is A solution that works if you don't have too many Page files to convert, but is very poor solution if trying to move everything off of the MacBook Pro to the iMac. I don't necessarily need to open the 5 years of files, but if I need to look at something archived, I'm dead in the water.
It doesn't make sense that a Mac can open a Microsoft product but cannot open a Mac product. I can understand that a program is not forward compatibale, but almost all programs are backward compatible. This same problem appears with Numbers 3.1.
Apple needs Microsoft as a solution?

HT1750 Pages, This document can't be opened because it's too old. To open it, save it with Pages 09 first still can't open pages document

I recently purchased a new Mac and I am having difficulty opening older Pages documents.
Pages, This document can't be opened because it's too old. To open it, save it with Pages 09 first still can't open pages document

Either you have access to Pages ’08 v3, Pages ’09 v4, or neither. One of these older, but more functional versions of Pages can open, and export the document in question to Word. Preview on OS X 10.9.5 and Yosemite can view Pages ’08 documents (in my experience). It is not obvious to me that Preview may be using the installed Pages ’09 v4.3 to assist in opening these '08 documents.
Once opened in Preview, you can select/paste text into Pages v5.2.2, or v5.5. If you want the images from the PDF, then export it from Preview as PDF, and then drag/drop onto latest free LibreOffice icon in the Dock, which will open the PDF for editing. Select, copy, and paste the images into Pages v5, or incorporate into Text boxes, or Shapes. When pasted, images will be in their original size/resolution, not necessarily as small as they appear in the PDF.
If the second paragraph is a chore, then follow Peggy's advice above on the sources for purchase of Pages ’09.
In the future, I would not recommend trusting document architecture to Apple, and use a more accessible format (.doc/x) for better cross-platform access, longevity, and application choice. You may find LibreOffice, or Office for Mac 2011 a better choice for features.

Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It ca

Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It can not be stored because the nam is invalid" With 2. trial it tells me that the data is blocked and I don't have the rights - and I should chenge them. But I am working as the Admin on my PC - and each trial to change the rights of the data is as well not possible because of missing rights - even I am Admin! I must always store the data with a new name, then it works, but I also cannot remove the old datas or shift them into the waste paper - because of no rights! -- sorry for not perfect english, I am German native speaker! Tahnks a lot for help!

Hi,
I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
The issue I did describe above, but it was a long explanation.
In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
More explanation I gave above.

How long did your first wireless back up take??

After doing the initial back up via ethernet, how long did your first wireless back up take?? I can't seem to get past the preparing stage. However I have recently learned that the first time backing up wirelessly, the finder indexes the back up & this can take a while. I'm leaving it a little longer now. It has been preparing for about half an hour now.
Is this normal?
How long does this indexing take?
What are your experiences?
Thanks.

So far for me it's been five days. I hooked up Time Capsule Thursday night, and after monitoring the progress for a few hours, I calculated that it should take three days, which I figured would mean that it should finish up by Sunday evening. (My MacBookPro had 103 gigs on it.)
It would have been nice if the instructions that came with the **** thing said something up front about hooking up via an ethernet cable for the initial backup. If I had seen those instructions before I started this nightmare, I might be done by now. Instead I started the backup wirelessly, which I'm sure accounts for some of the delay and hassle.
Unfortunately, the backup pace slowed steadily over the course of the weekend. By Saturday night, it had only done about 60 gigabyites, and by Sunday afternoon, it was only up to around 65. At that pace I figured I might be waiting another week before it finished, and since I actually take my computer with me when I leave my house, this would have deprived me of my computer for an unacceptable period. After doing some internet research and learning that using an ethernet cable would speed up the process, I therefore stopped the wireless backup, hooked up a cable, and restarted it at around 4 p.m. on Sunday afternoon.
The backup then proceeded steadily at a faster (although not exactly zippy) pace. By midnight it had gotten through about 60 gigabytes, and after timing the rate at which it was proceeding by that time, I estimated that it should finish sometime around 8 p.m. tonight (Monday).
I left the computer along during the day while I ran errands away from home. When I got back around 6:30, it appeared to have finished the initial backup and to be in the process of finishing up an incremental backup. The progress bar said "backing up 12,443 items...51.3 MB of 51.3 MB." Unfortunately, it seems to be stuck there. It's now 8 p.m., and it still says it's working on those 51.3 MB. I don't know how much longer I should wait before deciding that it's frozen.
I'd like to just set this thing on fire. I bought the Time Capsule because I liked the idea of wireless, automatic backups. It was supposed to make my life easier, not make it a living ****.

HT1363 after pressing Menu and Select, when the Apple sign appears, I immediately press select and play/pause, but again the red X sign appears. so it does not go to Disk Mode. Has anyone had this issue? I would be grateful if you could tell me what to do

The red X has appeared in my Ipod Classic Screen. Apple support tells me that I need to first put it manually on disk mode. to put it on disk mode I ought to press menu and select buton togeher, when the apple sign shows up, hold select button and play together.
After pressing Menu and Select, when the Apple sign appears, I immediately press select and play/pause, but again the red X sign appears. so it does not go to Disk Mode. Has anyone had this issue? I would be grateful if you could tell me what to do.

Thank you everyone for the replies. It defiantly helped point me in the right direction. With any luck, I will have my replacement phone sometime tomorrow.
I was able to call the iPhone support line this morning. The Apple rep stayed on the line with me for about an hour until he was sure the new phone would ship out. For $199 plus $29 for expedited handling I was able to get the replacement ordered with overnight shipping. Since the replacement doesn’t involve ATT&T I have no reason to suspect any further delays. Kudos to the Apple rep that helped me straighten out this mess.
It’s a shame that AT&T cares so little for their existing customers. Not only did they try to sell me the same phone for $499, they outright refused to help me. They also lied to me on numerous occasions and strung me along for close to three weeks for something that only took an hour to complete with the Apple rep.
I filed a formal complaint against AT&T through the Better Business Burrow as well as requested a review of our cooperate contract with AT&T. Our company currently has over 3000 phones with AT&T and there contract comes up for bid the end of our fiscal year (this October). We will be giving it heavy consideration before we consider renewing their contract.
I doubt that any of that will matter to a company that cares so little about their customers, but you never know.
Thanks again for all your help. I would probably still be trying to get my replacement for the next few months if it wasn’t for your suggestions.
-Niel

Did my first back up today using external hard drive and time machine now i can't drag and drop

Hi, i did my first back up today using time machine it all went onto my external hard drive fine. Now i cant drag and drop anyhting. I assume ive cahnged some settings in time machine but cant figure it out what to do can some one help ?
thanks

Brandbasher wrote:
Thanks Pondini but i have closed time machine, removed external hard drive.
Did you eject it first?
Now i cant drag and drop anything on my desk top, or mail or any other application. Ive tried moving folders, documents none of it works. Even moving around documents within a folder, it wont let me chnage the position of files.
That shouldn't be related to Time Machine (especially if the backups aren't mounted).
What happens when you try those things? Do you get any messages? Anything you can post a screenshot of?
Have you tried a Restart?
Does it happen in another user account? (If you don't have one, create one via System Prefs > Users & Groups.)

I wanted to know how to unlock my iphone, since I had to restore it and when it restarted, it appeared this message: "The SIM card que you currently have installed in this iphone is from a carrier that is not supported under the Currently actuvation polic

I wanted to know how to unlock my iphone, since I had to restore it and when it restarted, it appeared this message: "The SIM card que you currently have installed in this iphone is from a carrier that is not supported under the Currently actuvation policy that is assigned by the server activion. this is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request que this iphone be unlocked by your carrier. Please contact Apple for more information. "
I need help, I use my phone for everything enclusive to work. I appreciate if you can help. I'm from Brazil. My name and giullia.

Did you purchase this device from Apple or an authorized reseller? It sounds as if you had a device that was jailbroken/hacked to operate on your carrier. Upon updating the iOS, it is now locked back to the original carrier the device was locked to.
Only the carrier the device is locked to can authorize an unlock. You will need to make contact with that carrier and see if they provide unlocking services, and if they do, if you qualify for an unlock. Otherwise, you are out of luck. One that carrier can take care of the unlocking.

When Ipod is connected to Itunes all music can be seen, but when disconnected, the ipod appears as if there is no music. Hasn't happened to the movies. Help?

When Ipod is connected to Itunes, music that is used to have is listed, but, when disconnected, the ipod appears as if there is no music. Hasn't happened to the movies. Anyone have any ideas?

Since you did not mentioned about sync issues or problem, error messages.
You have to Sync the iTunes library with your iPod.
Refer to this tutorial, on syncing iPod
Have a nice day!

Save As ... When did it first appear?

Similar Messages

Maybe you are looking for