"Save As" will not show Airport Extreme from Safari with Yosemite.

macbook air mod-2011
Yosemite 10.10.1
After upgrading to Yosemite, using save as from safari will not list Airport Extreme as a share drive for use. It worked fine before Yosemite.
Accessing finder window direct usually has AE, but it gets lost and I have to cycle wireless off/on.
Please help.

Clearing the keychain has seemed to work, sorta. I have begun to understand the symptoms better. The Safari "save as" is a specific part of the symptom. If the MA (Mac Air) has been unattended over night or for hours, the readiness of the connection to the TC drive is lost. If finder is opened and the TC is clicked under the shared tab, then it takes 20-40 seconds to recognize the connection and have the "data" folder show itself. Once that happens, simultaneously, the safari list of available drives for saving populates and shows ready access to the TC. It seems that there is some background connection maintenance process to keep access current with the TC that is corrupted or problematic with Yosemite. I guess the latter since I am not the only one with this issue.
I think the Safari symptom would disappear if the connection was maintained with the shared TC drive.
Nice talking to me . . . . later.

Similar Messages

Adobe Reader will not open embedded PDFs in Safari with Yosemite

Adobe Reader will not open embedded PDFs in Safari with Yosemite installed

That looks like a perfectly good PDF, but since it's trying to open in Microsoft Word, that means your file association for .pdf files is incorrect. You should change it to point to Adobe Reader instead of Word.
If you are on Windows, see http://windows.microsoft.com/en-us/windows/change-file-open-program#1TC=windows-7

Crystal HTML viewer will not show embedded image from Infoview image store

I am having an issue with the html and dhtml viewers not showing an image I have embedded inside a crystal report. The image has been stored in infoview and embedded into the report from that source. Using the Crystal ActiveX viewer works fine in this case and shows the image. The html viewers however show the blank box with the red X in the top left corner when Internet explorer can't find an image.
Now, if I right click on the image and get it's properties I get this URL:
http://vsx2af0x/crystalreportviewers115/imagehandlerdotnetbridge.aspx?dynamicimage={B8FDE586-08D3-4A14-896C-0FE19AC3DB90}.png
If I take that url and try to load it directly through Internet explorer I get the following error:
Exception of type 'System.OutOfMemoryException' was thrown.
The file is small and only about 20k in size. If someone can help that would be greatly appreciated.
Thanks

Unfortunately I have been unable to remove the plug-in. The files is not locked, or shared, but my operating systems thinks it is.
What happens, when you try?
When I try to delete the plug-in from
/Library/Application Support/Aperture/Plug-Ins/Google/Analog Efex Pro/
with ⌘⌫, I simply get the pop-up panel to enter my administrator password, and the plug-in will be moved to the Trash:
Don't forget to quit Aperture, before trying to remove the plug-in and to log off and on.

Two devices synced, but firefox will not show most tabs from other devices.

I have had my laptop and my PC synced forever. Up until a week ago when I clicked "tabs from other devices" it would show me all of my tabs from the other computer, and if I closed one or opened a new one it would show up in the list almost instantly. Now all of a sudden when I click show tabs from other devices it will only show one or two of the tabs I have open on the other computer and ignore all the rest. No matter what I do I can only get it to show like google and facebook. Everything is still synced properly, bookmarks and all that jazz work fine. It's just the show tabs from other devices that isn't working, and that's the only feature I care about. If your suggestion is to make a new sync profile, don't bother responding, as that is not the problem or the solution.

Hi tdkevin,
This is strange you were not asked to try the new sync. As the old sync has the tab sync feature, but the new one has a new place for them. In order to move to the new sync you have to remove all the devices from the old sync and then it will allow you to set up the new one.
In Firefox for Android
In the new one in a new tab, tap on History, then on the bottom there are two icons: a clock and one with 4 grey squares. Tap that one and look at the recently synced tabs.
In Firefox for Desktop
if you have not set up the new sync the Tabs will sync every interval of time set by default in the about:config page. (search for sync interval I think). In the new one the about:accounts page will have a manage button that will take you to the preferences of sync. There you can check the Tabs tick.
I hope this clears up the differences between the old and new. The original question though was why some tabs were syncing and others not. I do not know, we can look at about:sync-logs if you have any errors in those log files. This may help lead to some more info.

My Google Calendar will not show up on iPhone 4S with iOS 7.1.1. What do?

I just got an iPhone 4S (bougtt used through a third party, in case it may make a difference) and I'm having issues connecting Google's calendar.
I've followed instructions here: http://michaelhyatt.com/how-to-setup-google-calendar-on-your-iphone-4.html;
here: http://www.craigbailey.net/google-calendars-not-showing-in-ios7/
and of course, here: https://support.google.com/a/users/answer/139206?hl=en
But so far, nothing has worked.
I should note that I can see the account itself under the Mail, Contacts, Calendars tab, the Calendars option is switched on and all other Google features (e.g. Gmail, notes and contacts) are operating fine. I also have an iPad mini which I bought in June 2013 (first hand) and has been displaying Google Calendar without any issues from Day 1. I've compared the settings on both devices and could not find any difference.
In short, I'm at a complete loss here and would greatly appreciate some help.

Same issue when I try to select the most recently taken photo thumbnail, bottom left: freezes.Problem is fairly recent, I don't think it ever happened before the last update.

Face Time not able to connect from MBAir with yosemite 10.10.2 to ipod 4th gen. 6.1.6

Hi All
I ressurrected my son's 4th gen Ipod and updated to 6.1.6 . It work perfectly . System 6.1.6 has face time and iMessage and the it works flawlessly from the ipod to my 2013 MB air with Yosemite 1010.2 and to the Ipad air2 with latest software . However the contrary does not works ! When I try to make FaceTime calls FROM the MB air or the Ipad to the Ipod , it hangs & disconnects . iMessage works perfectly both ways . Stranger than that , Face Time works without a glitch to the 4th gen Ipod , from an older MB black with system 10.7.5 ! Thanks in advance for your help .

Hello Portcruiser,
Thank you for using the Apple Support Community. Due to the nature of your issue or question you may find more information by using another one of Apple's support resources - https://getsupport.apple.com/GetproductgroupList.action.
All my best,
Allen

Raw and jpeg will not show when imported from camera

I am doing a OCA degree in digital photography using aperture 3 . I have been asked to take Raw and J pag , open up in the program I use. And not the differance and the make changes.
I have 1d MK III and 7 d I cannot get both file types to show side by side.. Some one tell me how to do this please. I must have clicked , ticked something , that I cannot find to put right again.

As always, start by copying the images on to a folder on the hard drive and then backing up the folder. Never import directly from camera or card into Aperture or any other images app.
Then since this is an exercise not a batch workflow, simply rename the RAW and JPEG versions of one image and separately import each renamed version into Aperture. The two should each be Masters, one from the JPEG original and one from the RAW original.
Note the JPEG may initially "look" better on the (relatively low resolution) display due to in-camera presets like sharpening, etc. not present in the RAW file. However the RAW file contains much more image data, is much more editable and is capable of making superior (relatively very high resolution) hard copy prints.
HTH
-Allen Wicks

Imovie will not show new photos from iphoto?

The imovie project I'm working on needs several photos that I recently downloaded. However when going into the photo section of imovie these new photos do not appear in the album that they have been placed in.
Is there anyway to get them to appear?
Any help would be appreciated!

limey1
Welcome to the Apple Discussions.
It's a while since i used v5 but I think this is true.
Whereas with early version of iPhoto there was a separate folder for each album, starting at v5 the app doesn;t do that. Instead the album information is stored as part of the main database file. At heart, it's a direction to the app to display certain pics together. The advantage being that a single pics can be many, many albums with no wasted disk space.
Regards
TD

Iphone4 will not play any videos from safari or youtube.

There are several comments on here saying to turn 'plug ins' on, but there is no setting for this under the safari option in setting. Am I missing something obvious?

Try this:
1. Close all inactive apps. Double-click the Home button and hold apps in the Task Bar down until they all wiggle then tap the minus sign to close apps. Tap the home button to return to Home screen.
2. Hold the Sleep/Wake and Home button down until you see the Apple Logo.

Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except join not extend and I can not get a network on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Rout/

Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except "join a wireless network (which it does) not "extend a wireless network" (Led turns yellow and I can not get a network working on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Router.
Airport gets it address DHCP.

Funny how I can ping the Extreme but the Hard Ethernet ports dont seem to work correctly.
When the AirPort Extreme is configured to "Join" a wireless network, the Ethernet ports are not enabled.
Oddly, the AirPort Express has a special feature that will allow it to to "Join" virtually any wireless network.....and the Ethernet port can be enabled. So, an Express would work for your purpose to provide an Ethernet connection to the media player. This assumes that the Express is located where it can receive a strong wireless signal from your main router.
Note that the Express will not provide any additional wireless coverage when it "Joins".

Airport Extreme will not show USB drive installed Solved!

Airport Extreme will not show USB drive installed Solved... At least for me!
Here's what I had to do to make it work with the newest 7.3.1 firmware.
Ready for this? No Joke Really!
1. Connect your USB drive to the Airport Extreme.
2. Turn it on.
3. Open the Airport Utility.
4. Go to Manual Setup.
5. Choose Disks and File Sharing.
Yep, we are going to set file sharing before we even see the disk we want to share!
You (I) had to set File Sharing on and Share Disks over Ethernet checked as well as set the Work Group (In my case). THEN restart the Airport Extreme.
After it re-started... My USB Drive was now present and ready for use.
I also dis-allowed Guest access. I re-started ALL computers in my network, both Windows and MAC. The USB drive held and works GREAT!
I know... Most of you thought this was a joke, It's not!
I tried everything to get the USB drive to work and failed every time just like most other people. Doing it this way worked like a charm.
Go Figure huh!
Hope this helps someone with this issue.
Message was edited by: DonaldH

How was the usb hard drive formatted? Was it NTFS, FAT32, or HFS+?

I have a mac pro g4 when i load a cd or dvd there is no start up noise from drive and icon will not show on desktop or in itunes. How should i troubleshoot? pioneer 105 mirror door

I have a mac pro g4 when i load a cd or dvd there is no start up noise from drive and icon will not show on desktop or in itunes. How should i troubleshoot? pioneer 105 mirror door

PIONEER DVD-RW DVR-105:
Firmware Revision:          A506
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2000 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          Insert media and refresh to show available burn speeds
yes its a power mac thanks its been a long month and Merry Christmas thanks for checking my question im hoping its a driver problem but not liking some other stuff looking like replace drive

HT201272 I have a purchased app that will not show up in the cloud and is no longer in the app store. Is there a way to get it from my iPhone to my iPad?

I have a purchased app that will not show up in the cloud and is no longer in the app store. Is there a way to get it from my iPhone to my iPad?

You should be able to copy it from your iPhone to your computer's iTunes via File > Devices > Transfer Purchases, and if it's compatible with your iPad you can then sync it to it

My IPad2 will not connect to the internet, "Safari could not open the page because the server stopped responding." My AirPort utility shows that I am connected. What could be the problem?

My iPad2 will not connect to the internet, "Safari could not open the page because the server stopped responding". I've run the AirPort utility and it shows that I'm connected to my Wi-Fi. The connection works with both my iMac and iPhone. I'm concerned that the problem is with hardware rather than software.

Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

I need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

i need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

ASk in the DW firum and be much more specific. Web page rendering issues are specific to specific versions of browsers and you may simply be using some bad code that messes up your page.
Mylenium

"Save As" will not show Airport Extreme from Safari with Yosemite.

Similar Messages

Maybe you are looking for