Save button enabled in MAX, but no changes to apply

Hello,
I have a situation with a number of my RT targets.  When I open an RT target in MAX, the Save button (and Revert button) are enabled as if there are settings to be applied to the unit.  I've gone through the process of pressing the save button and rebooting multiple times, and it still come back online in MAX as though there are settings to be saved on it.  I've also tried the Revert button with the same results.
Please see the attached screen shot.  This was taken imediately after a RIO reboot, and launching MAX right after the unit came online.
I have remotely installed software to the RIOs, and needed to set a password on some of the units recently.  But since then I've been able to verify that the software is infact installed and the passwords are infact set.  And some of these units have had restarts to be able to apply these setting many times.
So my question is, what could be causing MAX to think that there are setting to be saved to the RIO yet?  Thanks in advance for any help.
Attachments:
RIO Save Revert.JPG ‏164 KB

I had not, prior to your message, Richard.  So I did go through that process, but it did not correct the issue.  It seems to me, this issue resides on the RIO, not on the host computer.  I say this because I've had my colleagues access the RIO from their computers and see the exact same issue.
It does appear we have a fix though.  We have installed software, where the RIO reboots into install mode and completes the installation, the reboots again into normal mode.  After this point, the problem has not reappeared.  The RIOs have gone through numerous reboots, but this is the first time since the problem arose where we booted them into install (or safe) mode. 
For any future viewers, I will do a test soon to see if simply booting in safe mode will fix it.  But installing additional software does, and luckily we need to for our project.

Similar Messages

  • Enabling the save button when an unboud item is changed!

    hi!
    I HAVE a block wij an unbound item, this unbound item will contain
    the concatenation if 5 bound item, I use the post query trigger (block level) to
    concat theses 5 items in the unboud item, and in the when-validate item
    of the unbound item I subdivise the value by 5 and affect each one to the
    correspondant bound item....
    My question is : when I am in the unbound item and start to change it
    I need to have the save button enabled .......because the user need
    to say that he is changind somethig ....
    Thanks for any HELP!

    Hi,
    You can use set_item_property(.... in when validate_item trigger.
    ADinath Kamode

  • Building a Disbled vs. Enabled Save Button

    Hello. I have built a Save button which starts off in a
    disabled state, then gets enabled as soon as the user changes
    anything in the form. As it turns out, There's a problem with using
    'onchange' since it is not recognized by the DOM until the changed
    <input> item loses focus, and the user may desire to press
    the Save button immediately after making the change, which he
    cannot do since it will remain disabled until he moves the cursor
    off the <input> where he made the change. To solve that
    problem, I am using 'onkeypress', which lets me enable the Save
    button right away.
    That actually doesn't work for a <select>, nor do we
    want it to, since if the user presses 'N', for example, when the
    value of the <select> is already 'N', we don't want that to
    be treated as a change. For that situation, it turns out that
    'onchange' is the way to go, since indeed the change in this case
    is recognized by the DOM right away, without waiting for a change
    in focus.
    But now for the conundrum: The DOM does not consider
    Backspace to be a keypress. It also does not regard Tab as a
    keypress, which .is definitely how we want it to behave, since
    nothing changes when the user tabs from one <input> field to
    another. Sometimes that might be what we want for Backspace, too
    (backspacing over spaces at the end of text, for example?). But
    Backspace is in fact destructive of whatever character is to the
    left of the cursor when Backspace is pressed, and that's a change.
    In fact, IN SOME CASES, IT IS THE REMOVAL OF A CHARACTER - AND ONLY
    THAT - which contsitutes the change the user is making. But this
    key press will not fire the onkepress event, so will not let me
    enable the Save button when it's the only change which occurs.
    Ouch!
    I haven't tried them all, but the set of events available for
    <input> tags does not look promising. None appears to have a
    definition which would solve this problem.
    Any ideas?

    Okay, it's not really necessary, but it's a lot cooler, and I
    hate to abandon it. Since my original post, I have discovered in my
    O'Reilly Dynamic HTML book (Appendix C, p. 1026) that IE simply
    does not pass through the Backspace and Delete keystrokes although
    Navigator does, as I have verified with Firefox. I consider this a
    hugely stupid design decision on the part of Microsoft, so I'm much
    more willing now to bite the bullet and try to become
    Firefox-aware. Still, though, I may keep my disabled vs. enabled
    button, and provide users with Help doc explaining the difficulty
    (which I will blame on Microsoft), plus a possible solution: all my
    Save buttons are inside of <TD> cells, which have an onclick
    event by which I could trigger enabling the button which they
    contain. Clicking the still-disabled button will be a solution
    which will naturally occur to many users. On the other hand, my
    client does not care as much about the 'esthetics' of the
    application as I do, and my just go for a more kludgy solution
    which is less likely to result in a few user phone calls. (I
    realize that kludgy is in the eye of the beholder.) Thanks again
    for your help.
    Peyton
    [email protected]

  • How to keep the save-button active all the time?

    Hi!
    I'm using mobile sales 4.0.
    On a tile i've only fixed questions and combo boxes with yes and no ...
    When i write manually a "yes" in the combo box field the save button is active - When i use the combo box with a mouse click the save-button isn't active.
    What are the settings i've to do to keep the save-button active all the time?
    Thanks a lot in advance.
    Best regards,
    Ingo

    Hi Ingo,
    If your combobox is a bound control, then when you change a value in it, the save button should be enabled. Strange. But anyway, you can do this.
    In the <b>combobox_OnValueChanged2</b> event, make a call to makeDirty method in the tile:
    If boundAttributeChanged Then
         <b>anchorthatyourcombotiedto</b>.bo.MakeDirty True
    End If
    This will make the Save button enabled.
    Regards, Vadim.

  • I dont want to commit master-detail form untill user press save button

    We have department-employee kind of master detail form.
    1) We click on any record on department block.
    2) Then we change / insert /delete record in employee block.
    3) then we move to anothe department.
    4) now it ask for saving the changes. THIS WE DO NOT WANT.
    5) WE WANT TO SAVE CHANGES WHEN USER CLICK ON SAVE BUTTON.
    6) If user make changes to various employees of various department,
    we want user to cancel changes when ever user wants.
    IN SHORT WHAT WE WANT IS
    No record should be saved untill user press save button below.
    and If user press cancel all changes made must be undo.
    PLEASE DO NOT SUGGEST DO_COMMIT in clear block details,
    We know that and we dont want that option.
    Regards
    Upendra

    Hi URTRIVEDI
    but it gives "could not reserve record (x tries), keep trying?" error.The problem is not within the code given by Francois but in sessions u opened.
    pls make sure u r not running more than one instance of ur form with in one session.
    e.g. FireFox is opening more than one tab at a time every modification u made > compile > Generate , Save & Run only one Form instance
    Hope this helps...
    Regards,
    Amatu Allah

  • APO Selection Window Save Button missing

    Dear All,
    In some transactions in APO there is the option to input some selection criteria and using some buttons (icons)  offered in that window you could execute some action like "delete", "Load Selection" or "selection screen help" .....want I am missing here is the button to "Save" on selection.
    Does somebody knows how could I get this button displayed in the selection window?
    as sample you can take the /SAPAPO/SDP94 transaction an then the "selection window"button on the left side.
    I will appreciate any suggestion on this regard
    Thanks
    FedeX

    Hello,
    For this tcode initially save button wont be there ,but when you enter some data, you will get the save button.
    Thanks,
    Prasant K Paichha

  • Enabling the save button

    I was having a problem with an unbound item where if a user entered data into it and wanted to save, the save button on the menu was disabled. To get around this problem I created a post-change trigger for the unbound item where I used the set_menu_item_property to set the save button to enabled and this worked fine. I have another unbound item below the first one and I needed to do the same thing (eg. create a post-change trigger to enable the save button) but for this unbound item it doesn't work. When I go to the next item the save button remains disabled. Can anyone tell me why it works for one and not the other?
    thanks
    Cathy

    Run the debugger and single-step through your code and see what is and is not happening.

  • SAVE & PRINT Button Enable for Graph Report

    Hi All,
    I have developed a report for displaying a graphical hierarchy.But the 'SAVE" & 'PRINT'  button is in disable mode.
    I am using the 'GRAPH_HIERARCHY' function module for displaying the graph.
    Could anyone please suggest me how to enable the 'SAVE' & 'PRINT' button.
    Thanks in advance.
    Best Regards
    Sathish

    Hi Sathish,
    You can create your own PF-Status by copying it from the standard PF-Status of the output list. Then you include the print & save button.
    To get the GUI status of the output list follow menu path SYSTEM => STATUS to get the GUI status & its program.
    Go to SE41(Menu Painter) => enter the Standard Program & status name & click on copy button to copy these to a Z one & then finally use it in your program using SET PF-STATUS statement.
    Please close the thread if it solves your query.
    Regards
    Abhii

  • How to enable the Save button in ALV_GRID_DISPLAY function module

    Dear experts,
                    I Created a  ALV report by using ALV_GRID_DISPLAY functional module ,i need to enable the SAVE button ,my reqirement is to trigger some event in save button, then if i created own PF status existing icon are hidden, mention in below screen shot.
    suggest me
    Thanks
    sivashankar k

    Hi sivashankar,
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
    *   I_INTERFACE_CHECK              = ' '
    *   I_BYPASSING_BUFFER             =
    *   I_BUFFER_ACTIVE                = ' '
           i_callback_program             = sy-repid
           i_callback_pf_status_set       = 'SET_PF_STATUS'
            i_callback_user_command        = 'USER_COMMAND'
    FORM  set_pf_status USING rt_extab TYPE slis_t_extab.
       SET PF-STATUS 'MENU'.
    ENDFORM.                  
    ""Handle use action
    FORM user_command USING r_ucomm     LIKE sy-ucomm
                             rs_selfield TYPE slis_selfield.
       CASE r_ucomm.
        WHEN 'SAVE'.
       ENDCASE.
    ENDFORM.
    PF STATUS : MENU (copied STANDARD(gui status) from SAPLKKBL, do changes as per requirement)
    Regards
    Sreekanth

  • Save Button in ITS enabled transaction ME54N does not appear

    Hello,
    We are on EP 7 SP 18.
    Via the Universal worklist iview in the Portal when the user clicks on a workitem and desires to reject it via the transaction ME54N, for the rejection to be saved in SAP the save button on transaction ME54N must be clicked.
    However, the save button is no where to be seen on the transaction for the user to click. The following parameters are set in ITS as per note 1148291 and 1010519
    ~webgui_icon_toolbar=1
    ~webgui_simple_toolbar=1
    also tried various combinations of values for the above parameters but no luck.
    Any help on how to get to have the save button appear for the ITS enabled transaction ME54N would be greatly appreciated.
    Regards,
    Sunil

    HI Sunil
    Did you got any solution? If yes, Could you please share.

  • Enable the Print,Save button for dashboard page in obiee11g

    Hi All,
    How To Enable print and save button for hole dashboard page.I found in 10g but i can't found in the 11g.

    All the best... if you get solution share it.
    thanks
    @User
    I'm not guru! I'm just (top) learner
    Edited by: Srini VEERAVALLI on Apr 5, 2013 6:17 AM

  • Button.enabled = false   (but still clickable?!)

    Hello Dear Forum,
    Got a button (imported png defined as a button in the library).
    The button is dragged onto the stage, given an instance name "btn".
    Clicking the button fires an eventListener which is doing all the right things, except...
    btn.enabled = false;
    ...only changes the cursor from a pointing finger to an arrow. What?! It is still clickable.
    My intention is to disable the button so it cannot be clicked. But it can still be clicked. Not good.
    QUESTION: How do I disable a button and prevent it from being clicked?
    Thanks for your support,
    ///johan
    REASON: I am temporarily disabling the button so that it cannot be clicked multiple times while loading other stuff. Makes sense.

    To disable the button (a homegrown SimpleButton) use its mouseEnabled property.  I think enabled only applies to Button components in AS3.

  • On my PC, in I-Tunes, my iPod (touch) button disappears every time I try to sync or update.  Everything has been rebooted, but no changes. Any ideas on how to sync to the IPod?

    On my PC, in I-Tunes, the iPod (touch) button disappears every time I try to sync or update.  Everything has been rebooted, but no changes. Any ideas on how to sync to the IPod?  Better yet, how to keep the ipod button on screen when itunes is open and the ipod is connected?

    - Have you tried another USB port and cable?
    - Inspect the dock connector for bend or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.

  • When trying to save a page, I can enter file name etc, but don't see the SAVE button to click SAVE. It's like it's below the screen or something. How do I fix this?

    I was in a webpage and was trying to save it. I selected SAVE AS from the drop down menu. Then I entered the file name, and selected TEXT ONLY as file type. Only thing left to do was click SAVE, but there was no SAVE button.

    You can check it DTA or another extension isn't causing this problem.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Using Safari 5.1.7, I found a book on a web site that is free and downloadable, but when I click Save As, the Save button is grayed out.

    Today (1/11/13) I found an online book, a .pdf file ( a math book from the Univ. of MI) that is advertised as free and downloadable. However, when in Safari I click on File/Save As, the window that opens has the Save button grayed out. The window opens with "Export as ..., and the name of the pdf file appears in the export window.
    Any help will be greatly appreciated!

    Update:  changed the AppleScript to add a one second delay between entering the file name and hitting return in the save dialog. Seems to be working now. I guess hitting save so quickly after the dialog popped up was fubaring things.  Still wonder why...

Maybe you are looking for