Save button grayed out

Kartz, any answer to this yet? I have the same issue, I open a file, make some changes, and the standard SAVE button is grayed out. An asterik appears in the file name, so I know that means my change is acknowledged, but the Save button stays grayed out.

Hi, Thomas. We'd like to help, but do need more information to do so.
Where is your file stored?
e.g. your Desktop, Documents folder, an external hard drive, network file share, etc.
Does this issue occur all of the time, or only sometimes?
What version of Dreamweaver are you using?
On what operating system, including version?
(e.g. Windows 7 64-bit Service Pack 1, Mac OS 10.6.8, etc.)
As a comparison test, please create a new file in Dreamweaver using one of the included layouts (e.g. 3-column liquid), save the file to your Desktop, and then make a change. Does the same issue occur with this file at all?

Similar Messages

Adobe Acrobat 8 Pro Save button grayed out

I have a user with Windows 7 with a fresh install of Adobe acrobat 8 pro and everytime you open a pdf and type in it the Save button is grayed out. You can go to Save file as but why is the Save button grayed out? I have ran updates and even removed it again and reinstalled still the Save button is grayed out? I even created a new pdf with just test word in it and saved it to desktop the button was still grayed out when i reopened it.

Only the fully updated Acrobat 9 and Acrobat X products support use under Windows 7.
Adobe products and operating system compatibility

Data source active/inactive button grayed out in LBWE

Hello,
When I was activating the Logistics datasource in LBWE, my data source status became red and the Active/Inactive button grayed out? how can I make this data source active again?
Thanks,
KK

Hi Kumar,
The status will become Red and Active/Inactive is disable due to Extract structure activated but data source is not maintained. This happens once you change the extract structure to Include additional fields. Please do the below step:
in LBWE, Click on Data source (Technical name of your data source beside maintainance) and you will get maintainance screen, change if you want some thing or else leave as it is and save, Now the status for data source in LBWE will become yellow and activate/deactivate will enable.
Regards,
Kams

HT3678 I purchased Quick time pro, went through the steps above. When I go to save the video save is grayed out and it says I need to purchase quicktime pro.

I purchased Quick time pro, went through the steps above to install.
When I go to save the video save is grayed out and it says I need to purchase quicktime pro.

Quicktime Pro will do full screen streaming videos that are compatible with Quicktime installed Codecs. If the video of the Olympics on the website has a specific URL to go straight to the video, then yes, you can call upon it with Quicktime Pro's player and then watch it fullscreen.
If the video of the Olympics was embedded such a way that you can't find the direct link to the video, then the limitation is how the webpage is designed. Thanks to Flip4Mac, there is now also a Windows Media codec you can install for Quicktime as well:
http://www.flip4mac.com/wmv_download.htm
Although some video software like Elgato's EyeTV don't work with it yet. If you are using Elgato's software, don't download it, and rather download Windows Media Player for Mac OS X:
http://tinyurl.com/26pxg
if the video is in Windows Media.
If the video is in Realplayer, click on the Realplayer Free button on the upper right corner of:
http://www.real.com/player/?src=realaudio
You can enter a dummy address and password if you don't want Real's offers.
If it is still a question of not being able to determine the true link to the video, try using different Mac web browsers to see what result you get:
http://www.macmaps.com/browser.html
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window. The save button greys out. Solutions anyone?

After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window. The save button greys out. Solutions anyone?

Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window.
This action will delete any custom Mail stationery that you have created. If you want to preserve it, ask for instructions.
If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Address Book "Edit" button grayed out...unable to edit

Had to edit a contact's info and was surprised to find the Edit button grayed out, not allowing me to click it. Repairing permissions has not helped.

V.K., thanks for the suggestion. Unfortunately, before I got to try it, I re-launched Address Book one more time and found it will no longer launch. Its Dock icon just keeps bouncing. Not only that, but I've also found that iCal and Mail will no longer launch, either. The iCal calendar pane and the Mail main window open, but the beach ball spins forever. I've never seen this before. Any ideas?
I tried a different account on the same computer. No problems there.

Artwork Button Grayed-Out

I have some MP3s of an unknown sample rate and different bit depths. I would like to add artwork to these files, but iTunes has the artwork button grayed-out. I can convert the MP3s to AAC, but the quality will suffer, and I don't have the original uncompressed audio to start with.
Is there a solution to this?
Mac Pro 2.66 GHz Quad Xeon Mac OS X (10.4.7) 3 GB RAM

If you do a Get Info on the MP3 in iTunes and select the Artwork tab can you add there?
If you Ctrl Click the track in iTunes and Show in Finder then do another Get Info are the permissions set correctly?
Regards,
Colin R.

Join Button Grayed Out

My iPad connects with no problem at home on my Time Capsule and Airport Extreme Routers. At my office, I can't even find out if it will connect or not, because when I select the network to join it, as soon as I type in a password, the JOIN button grays out making it impossible to connect. On hold now with Apple for 20 minutes and they are scratching their heads. Not a good sign for a device I am otherwise crazy about. Anyone else got this issue? For what its worth, its a Linksys Router at the office.

Oh heck, nevermind. Turns out I was entering the wrong password. DOH! Nothing to see here, move along.

Cannot Approve Journal Batch (Button grayed out in More Actions screen)

Cannot Approve Journal Batch (Button grayed out in More Actions screen)
The Journal Batch Approval notification goes to one or more approvers but when any approver opens the journal and tries to approve, the approve batch button is greyed out and nobody can approve the Journal batch. The approver has every authority amount and other wise.
Any idea what might be wrong? Do I need to setup something in Preference pages etc.,?
Thanks for your help.
Harish Amble
[email protected]

Are you looking at the Workflow Notifications page or GL page. Please give me the navigation used to reach the page. Typically in workflow notification details page, the Response buttons are either displayed or hidden based on whether the notification has a Result Type attached or not. I don't think they are greyed out based on any rule.
Workflow notifications does not check the approval authority by itself. Ann appropriate workflow notification with right content and result type should be sent based on the approval authority checked in a previous function activity.
Thanks
Vijay

Unable to rotate raw images in bridge, rotate buttons grayed out?

Unable to rotate raw images in bridge, rotate buttons grayed out?
Bridge 5.0.2.4.

There is an ignore EXIF setting Preferences. I can't remember if that is Bridge or Photoshop, but IIRC it is for DNG files.
Right. Check Photosho > Preferences > File handling and make sure 'Ignore EXIF tag, is not checked. I think that might do it, so long as it refers to sidecare files, because only RAW files would have one.

Why Are My Text Align Buttons Grayed Out?

My users are unable to center text when edited pages in CS3 and CS4. The standard paragraph alignment buttons are grayed out.
All the users of my site have Admin role, and I have set up the role to allow unrestricted editing. And "Allow Users to Apply Styles"... At screenshot of some of my settings is attached. I don't see why Contribute is not allowing this basic element to work.
Why Are My Text Align Buttons Grayed Out?
Any help would be greatly appreciated.

I experienced the very same issue, but found an interesting quick-fix that worked for us.
Several of my webpage content managers reported that they could not change the text alignment in pages created using Dreamweaver nested templates. We use nested editable regions in order to restrict portions of the pages (i.e. banners and navigation menus) from being edited.
I found that Contribute CS4 could realign text in some parts of the affected pages, but not others.
Further exam revealed that Contribute could change the alignment on any text that was inside a table on those pages. If I inserted a table and then cut-n-pasted the problem text into the table, the text lost its style/formatting, but it could then have its alignment changed.
Any text not inside a table could not have the alignment changed by Contribute and changing its style/formatting made no difference.
One note though: It was interesting that after pasting the text into a table, if I selected a chunk of text, the alignment buttons grayed out again. However, if I simply clicked on the line of text (did not select it), the buttons remained active and the text alignment could be changed.
I don't know why it is happening. The nested regions were working fine, or so I thought, until recently.
The above is a quick-fix and got my page content managers back online, but I'm still searching for a long-term solution if anyone has one.
Good luck...
GaryC3706

ICloud email won't send (it tries to send and then freezes, send button grayed out)

I can recieve email just fine. I can draft an email just fine. But it won't send. When I hit the send button, the email window goes away and a message box appears and disappears so fast I can't read it. The email window reapears with the "send" button grayed out. Once this happens, I can't close the email window. I have to quit mail. When I open mail back up, the email will still be there and I can close it. The send button is no longer grayed out, but if I hit send, the same thing happens (i.e., screen flashes and the send button is grayed out).
I've tried deleting the acouunt and reforming it. Didn't help. I checked to see that my outgoing server is "iCloud" and that it send on port 993 and the SSL check box is checked.
Any ideas?

I'm having the exact same problem on one of my Macs but no the other.
Did you ever get this resolved?

Edit button grayed out

I'm using Acrobat 10.1.13 on Mac OS X 10.9.5.
I have a form I created in Acrobat seven or eight years ago and have been using successfully since. I have edited it several times in the past. Today, I went to edit it and the Form Edit button is grayed out, for no apparent reason I can see. It is the only form option that is grayed out.
I searched the forum for similar reports; I examined the security and advanced security panels (nothing found, but I unchecked even the basic security that was there); I checked the document PDF/A setting (set it to "Never"), and it hasn't helped. I tried to "Save a copy" as recommended by another posting -- I found only "Save as... PDF," and when I tried that I was told "The document could not be saved. There was a problem reading this document (14)."
I can still edit the document and i can still print it (though I have to use Preview to print, because since I upgraded to Acrobat 10 I always get "The document count not be printed / There were no page selected to print" when I try to print from Acrobat, and have been unable to resolve that, either).
The form does pretty intricate inter-field computations, so it would be a serious effort to recreate from scratch.
Is there any way I can get this working again?

V.K., thanks for the suggestion. Unfortunately, before I got to try it, I re-launched Address Book one more time and found it will no longer launch. Its Dock icon just keeps bouncing. Not only that, but I've also found that iCal and Mail will no longer launch, either. The iCal calendar pane and the Mail main window open, but the beach ball spins forever. I've never seen this before. Any ideas?
I tried a different account on the same computer. No problems there.

Save function grayed out

Hi.
I am using Acrobat Pro 9 and the save function via file menu is grayed out for All documents.
The toolbar save button is also grayed out for All documents.
However, I can use the Save As function via the file menu.
It is annoying that I cannot just "save."
I'd appreciate it if can someone explain this? And help me please?
Thanks.

I do have both; however, I am sure I have Adobe Acrobat 9 Pro open because
it says
that in the window and in the help tab.
I checked the security manager, nothing is apparent.
In addition, I am able to use the Save As function, just not the Save
function or the Save button in the toolbar.
It is annoying that I have to go to File>Save As> then press ok.

Submit button grayed out in Project server 2013 WorkFlow

We published the Workflow in project server'13 through SharePoint desginer 2013 and we used the Microsoft sample workflow. after saving the project information Submit button is in disable mode. So can any body clarify this issue ?
we tried the re provisioned the PWA through the above article but still submit button is in grayed out mode.
Please clarify me where i am wrong?
Thanks in advance.

Hi,
Open your site in SharePoint Designer
Expand the "Workflows" folder, and the folder containing the workflow you want to fix
Right-click on the file that ends in "xoml.wfconfig.xml"
Choose Open With -> SharePoint Designer (Open as XML)”
Look for the “RulesVersion” attribute
Change its value to “V1.0”
Save the xml file
If you modify the workflow again, you’ll have to change the “RulesVersion” attribute again before saving as an STP as changing the workflow increments this
attribute value which has to be reset to "V1.0".
Source: http://suguk.org/forums/thread/3942.aspx
Hope this will help you.
Jalal Blali MCTS, MCITP

Save button grayed out

Similar Messages

Maybe you are looking for