Save config in the wlc4402

Hi
I need help in the restore config in the wlc 4402 way tftp server, and save an restore easy and fast config..
regards....

Hi Alexis,
Have a look at this info;
WLC Controller Configuration Backup and Restore
From this excellent doc;
http://www.cisco.com/en/US/products/ps6366/prod_technical_reference09186a00806cfa96.html#wp1064769
Hope this helps!
Rob

Similar Messages

Unable to save config in ASA 5505

Hi all,
I have ASA 5505 and
Hi all, I have this issue, I save the configuration in the ASA 5505 using write memory or using copy run start but whe i unplug the power cord and plug it back in the ASA gets its factory default configuration.
Please help
Thanks
MAhesh

i can save the config now and did reload.config is saved now.
The config was also saved before. But due to the config-register the startup-config was not applied after loading the image.
it shows no file name is this normal?
If you don't see any variables in "sh bootvar" it defaults to the first image in flash and the saved startup-config. So everything fine here.
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

'save as' redownloads the data

everbody notice how if you dont cow-down to the mods here, and pretend to worship there replys the threads get locked. Has anybody figured out how to fix the dl issues yet.
The question i posted
you cannot right click save as on an image, after the image has been dl already to save it FF re-downloads the image again. Noone can produce a config setting that corrects that. so if your paying for data FF is causing you to pay double.
while something is DL most of the time the dl stalls. You now cannot pause and resume a dl to get it going again, the old Dl dialogue box had a pause function, the new one 'right-click' shows a pause but its grayed out and does not function
FF cannot handle multiple tabs anymore, if you open multiple tabs it freezes FF and you get a slow script error. But the same tabs can be opened in an old version of IE 7,
the repeated crashes are well known without a fix,
the new version seems to have numerous bugs without fixes, or explanations that you need some add-on instead of a FF function.
the mere fact that FF cause double data usage without a fix or explanation is beyond inexcusable. Payinf for double data because of a code error is unbelievable. test i opened IE went to a pg open 3 tabs saved the images, and did the same in FF and it used 3.23 times more data.
Every since that Tor / FF debacle when the old versions were declared no good every version of FF since then has had to many errors without fixes that it has became an industry joke. The fact that chrome and IE or better browsers now speaks volumes. I am no code writer, but since that time, every version is so slow and bug prone, that what ever attempt to say face or redemption has been a disaster.
this is the reply
To answer your questions here:
you cannot right click save as on an image, after the image has been dl already to save it FF re-downloads the image again. Noone can produce a config setting that corrects that. so if your paying for data FF is causing you to pay double.
I'm not sure I understand this. When I click save image as then try again it works fine for me. Can you clarify what you are trying to achieve?
while something is DL most of the time the dl stalls. You now cannot pause and resume a dl to get it going again, the old Dl dialogue box had a pause function, the new one 'right-click' shows a pause but its grayed out and does not function
It is better to use an external Download Manager (DM) if you are on dialup or have an unreliable connection. An external Download Manager offers better support for resuming interrupted downloads than the built-in Firefox DM.
You can use the FlashGot extension to integrate an external Download Manager in Firefox. FlashGot: https://addons.mozilla.org/firefox/addon/flashgot/
FF cannot handle multiple tabs anymore, if you open multiple tabs it freezes FF and you get a slow script error. But the same tabs can be opened in an old version of IE 7,
This is most likely the way Firefox is set up on your end. What add-ons are you running since I don't see any listed. I need some more non-personal information from you. Please do the following:
Click the Firefox button at the top left, then click the Help menu and select Troubleshooting Information from the submenu. If you don't have a Firefox button, click the Help menu at the top and select Troubleshooting Information from the menu.
Now, a new tab containing your troubleshooting information should open.
At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article Use the Troubleshooting Information page to help fix Firefox issues.
the new version seems to have numerous bugs without fixes, or explanations that you need some add-on instead of a FF function.
I see you have Fx 26 installed and not the latest 27.0.1. See what's new with Firefox in version 27.0.1 http://www.mozilla.org/en-US/firefox/27.0.1/releasenotes/
the mere fact that FF cause double data usage without a fix or explanation is beyond inexcusable. Payinf for double data because of a code error is unbelievable. test i opened IE went to a pg open 3 tabs saved the images, and did the same in FF and it used 3.23 times more data.
Double data usage? Are you talking about a smart phone data limit or your RAM usage?
then i got this,
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
So i replied and they locked the thread, so no answer but theirs could be shown, and shown it didnt work. the fact they did not understand the issue of save as re-dling from the web instead of saving from cache is inexcusable
This is the reply
It is not brain surgery, the post speaks for itself.
if you are on a website and open an image in a new tab to save it, ff dl's it to cache so you can view it in that tab. if you right click to save it "save image as" ff re-downloads the image a second time, it DOES NOT save it from the already downloaded cache version of it.
That is double the data usage to get a single image. if it is a 2 mb image, ff uses 2mb to open the tab and view in tab, and then uses another 2 mb to re-save the image. IT DID NOT USE TO DO THAT ON THE OLD VERSIONS. and 27 does it too.
No if your internet plan charges you by the mb or gb your wasting data charges on duplicate data, because of a FF code problem.
as for the numerous bugs, read the forum, and just like your answer instead of a fix, YOU suggest you use an add-on or other software instead of fixing the issue or default config problem.
No-one should have to use a dl manager just because FF wont fix its dl problems. That is the biggest issue these days is the excuses and workarounds instead of fixes.
The older FF all had a pause and resume option so even if the off chance it stalled you could stop and start it. now you cant, the pause button is visible but grayed out. (that is on ever persons ff I have seen) home work, friends, not just mine. and there are numerous hits about that on web searches.
The ff browser is the software that reads the script, all the new versions have repeated slow script warnings when the browser stalls. that is a browser issue, not a computer, or setting, or website error. FF the browser is reading the script, and the slow script error is a FF issue, with no fix.
then you try and say to upgrade again to 27 from 26. The whole issue and problem is FF instead of fixing the bugs just claims upgrade. that's fine but 27 has the same bugs as 26, but FF wont fix a "bug' under 26 so every bug up to that point that has been reported is ignored. FF will only address bugs under 27, but the code for 27 is 99.8% of 26, but all the bugs from 26 and earlier version that are migrated into 27 have to be reported individually AGAIN, and new bug reports made, but by that time there will be a 28 and again nothing will be fixed.
you cant just throw out a new version every 3 days and ignore the old bugs and not fix them.
FF is just becoming useless, you sure cant dl with it, pics, files, etc. no dl will complete. god help you if you have to dl a zip file.
As for the settings, just an excuse. So to prove it, before replying I remove all add ons, reset to default, FF will not dl a 30 mb file. but on the same connection IE did it in under 13 seconds, and chrome 24 seconds. FF failed to complete 3 different times and stalled to the point it froze the browser the final try.
That is not any other issue but the browser software and code.
How much more simplier do they want it explained. the issue with them is they did not have an answer, so they lock the thread to keep you from replyimg. Note: that i reset all the defaults and cleared all the addon thus a brand new profile not to mention the new reinstall.
then this
No need to personalize your comments here. We get it - you aren't happy with the Mozilla developers and with Firefox, but there is no need to take it out on the support volunteers.
If the sole purpose if this thread was to provide feedback to Mozilla, please do so here (using the current version of Firefox) - https://input.mozilla.org/en-US/feedback
Since I don't see any support questions here, I am locking this thread.

A loosely related thread
* ''How to retrieve old "Downloads" window?'' <s>[/questions/98037]</s> [/questions/980371] <sub> fixed link. aw</sub>
That thread also relates to download issues. That and related threads may benefit from HelpDesk attention.

"No space remaining to save config" in cat3550 ?

Below is log message(cat3550)
Cat3550#wr
Building configuration...
% Warning: Saving this config to nvram may corrupt any network management or security files stored at the end of nvram.
Continue? [no]:
% Configuration buffer full, can't add command: password xxx
login
%Aborting Save. Compress the config.[OK]
Jul 25 16:55:35: %SYS-3-CONFIG_NO_PRIVATE: No space remaining to save private config
Jul 25 16:55:55: %SYS-3-CONFIG_NO_PRIVATE: No space remaining to save private config
Jul 25 16:56:56: %SYS-3-CONFIG_NO_PRIVATE: No space remaining to save private config
384K bytes of flash-simulated non-volatile configuration memory.
please give me what can i do to resolve this problem. thanks

Hi,
The solution is to use the boot buffersize size configuration command in order to increase the size of the simulated NVRAM. The configuration file cannot be larger than the buffer size allocation. The range is from 4096 to 524,288 bytes.
The boot buffersize command simulates a larger NVRAM.
Check out this URL
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfab.shtml#cat3550
-VJ

I have Pages for the iPad and desktop, how can I save it besides the iCloud on my computer and not the iPad?

I have purchased Pages for my desktop iMac and Macbook Air. I also have it on my iPad, iPhone and iPod Touch. They are all synced through the icloud, but the space is now starting to fill up. (I am the guy asking trivia questions and it fills up with A LOT of questions). BUT, after each week, I can get rid of 3 documents (16 questions per document). So, I have roughly 80 games worth of trivia and half of which I would like to save on my computer. I can pull it up on my computer and it shows that I have that from the icloud, but not on the desktop. I have lots of space on my desktop to save these, but the iPad is not as large for space.
How can I transfer roughly 40 documents (from pages) from the icloud to the desktop, (for permanent storage)? do I have to do each one individually, or is there a select documents you want to move? Then I can delete from ipad as it seems to take up space on both the ipad and the icloud.
Thank you in advance.

Just ignore that post above. I tried to edit it but was too late. Deleting a document from iPad does delete it from iCloud.
Ignore the line 'There is no data limit on iCloud.com so you could keep all your documents on there' because of course then they will sync to your devices and that's not what you want.
Sorry, for the confusion.
Removing documents from iCloud:
iCloud: Remove documents from iCloud
You can also move documents to your computer by opening Pages, select iCloud and all the documents you want to move, and drag them onto your desktop (or folder).
iCloud: iCloud storage and backup overview
Here is a discussion about 'other':
Re: What is "other" memory on my iPad

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

Please don't post the same question multiple times!

Toshiba Power saver may be the problem

My Satellite A665-S6050 has had all of the symptoms you read about in these forums;
crash, freeze, hung, locked, BSOD, Windows crash errors, etc.
I bought the laptop new a couple years ago and both love it and hate it when it exhibits
its freezing behavior. This is the intel I-3, 4 GB ram, Windows 7(64 bit) version. Really nice
when it's running normally.
I have watched and read through hundreds of posts throughout these forums since my purchase.
I have never sent the laptop back to Toshiba. Primarily because I've been able to force power off
then on, go to safe mode, schedule a disk scan on the next power up, reboots normally and I'm good
for who knows how long.
Following suggestions you can read in these forums, I have upgraded the Intel HD graphics display driver.
I install Windows updates every time they come available(auto update is enabled). I've updated the
Toshiba bios. I've updated Firefox every time it is available(my favorite browser). Updated java and
flash(again automatic updates). Some user settings that I've changed; I've disabled sleep mode(set it
to 'never' under 'advanced power settings) in every power scheme I have. I only use 'High Performance'
power scheme(plan). I have the setting for turning off the hard drive set to 'never'. My rational for doing
this is there is just too much going on under Windows 7, all the time. You never know what's running in the
background. Many times as the laptop freezes and or Windows tries it's best to recover, I get a strong feeling
that the hard drive has shut off! Especially, when Windows is trying to save a dump but can't because it can't
access hd0(hard drive)(I have to force power cycle off/on to recover).
This brings me to my current state of this troubleshooting saga. The last time the laptop froze, I was watching
streaming video in one Firefox window and had a slide show playing in another Firefox window(2 windows, not
2 tabs). Then in the lower right corner I get the Toshiba power saver notification that it is shutting down the
optical drive. It goes away on it's own in about 10 seconds. But immediately everything gets real slow until every
freezes. Windows tries to save a dump but can't. Windows tries to reboot itself but can't. Shows me a screen to
modify the boot list because the hd0 is not available. So, as so many times before I have to hold the power
button down for force power off. Wait a few, then power on, do my thing with safe mode, check disk, etc.
Power up and boots normally. Runs great for who knows how long. Right now as I type this, I have a audio CD
in my optical drive with Windows Media player set to 'replay' continuously. This I hope will prevent the 'Toshiba
power saver' from getting triggered because the optical drive is not idle and therefore won't shut off the hard
drive too! I have no idea how I can prove that 'Toshiba Power saver' is causing these freezes, crashes, lock ups,
etc. But at least if I can keep the optical drive in use and therefore prevent the 'power saver' from kicking in
maybe I can eliminate that as a possible cause of the freezes.
I am really disappointed to read so many Toshiba owners sending their computers to Toshiba service
hoping and praying for resolution but getting no satisfaction in the end. I love my Toshiba and I'll keep it.
I am a recreational user. Don't need to save power. When I use my computer, I want it to function as
powerful as possible until I intentionally perform a normal Windows shutdown.
My employer supplies me with a laptop (different brand). It has Intel I-5 chip, 3 GB ram Win XP Pro..
I run that computer full speed 9 -10 hours a day and I may have to reboot maybe once every other week.
Not bad considering the abuse I put it through. I would hate to have to rely on this Toshiba for work. I
don't think it could stay fully operational for that period of time.
Please Toshiba, tell me how I can help with the troubleshooting of this seriously pervasive problem on
so many of your computers. Is there an event log I can provide? Windows dump files(when they do get
saved)? Help me help you resolve this problem and satisfy hundreds of your customers.
Thank you in advance for your time.
Doug

Jerry,
It happened again this afternoon. This is the first time my system froze since the last time
I reported here in the forum. And just like I reported earlier, Toshiba Power Saver turned off
the optical drive power, I saw the pop-up in the lower right corner to notify me of the event.
I had Toshiba 'PC Health Monitor' running and minimized. I clicked on the icon to restore it
to the desktop. It displayed as expected. The hard drive graphic looked normal and spinning
as usual. I clicked on the graphic of the spinning hard drive and expected 'Power Options' to
display. Instead my desktop went away(all icons, system tray, system notification area, launch
pad, etc), everything gone. The graphic of the spinning hard drive stopped spinning. I tried a
CTL+ALT+DEL and got a new pop-up from Windows that it couldn't respond and I had 2 options;
press ESC or hold the power button down to force power and a shutdown. Which is what I eventually
did.
Powered up, went to safe mode, scheduled disk check on the next restart. Disk check runs and
finds no problem. System runs normally again.
As far as finding these events in the Windows logs using 'Event viewer', is not going to help.
I know exactly what time this all took place. I just can't find any event log showing that it took
place. There's a small gap in the time stamps just before the event until a few minutes after the
event. Then I see a mixture of 'errors' and 'information' events after the power on and restart
but nothing specifically addressing the hard drive before the restart.
I see an event log; "Previous shutdown was not expected". I'm sure that's not what your asking
to see. I don't know if it would be possible to trace the 'Toshiba Power Saver' but that may be
the only way I could prove my point that it is shutting off power to both the optical drive and
the hard drive at the same time.
Is there a way to disable or remove Toshiba Power Saver without causing a more serious problem?
Thank you in advance for your time and expertise.
Doug.

I deleted my desktop icon - now I can't save things to the desktop!

After a complete meltdown of my computer (and thank GOD I backed everything up!!) ... I'm transferring everything back to my iMac from an external drive ... BUT, I deleted the little "desktop" icon from my finder folder - or more like, I dragged a desktop folder from the external hard drive and "replaced" the desktop icon.
Now I can't save anything to the desktop. When I drag something to the desktop it says "The item cannot be moved because the 'desktop' cannot be modified."
Is there a way to get this back???

No ...
Under "Ownership & Permission" is says "You can - Read & Write", so that's not the issue.
What I did was:
When you open the finder window, there are several icons that appear in the window - usually the Desktop icon, the Home icon, the Applications icon, the Documents icon, the Movies icon, the Music icon and the Pictures icon.
What I did was, I dragged a "Desktop FOLDER" over from an external hard drive and it asked me if I wanted to replace the Desktop. I said "Yes" and now I no longer have the DESKTOP ICON on the left side of the finder window and I can no longer drag and drop things to the desktop.
The desktop icon no longer exists, so I can't access my desktop VIA the finder window.
Does this make sense?

How to change the default save encoding of the dvm files when create dvm???

When I creating a DVM(domain-value mapping) in Chinese on the ESB control and confirm it, then restarted the SOA service, the DVM that I created in Chinese disappeared from ESB control. All the maps(both English and Chinese ) are in DVM Repository.
After I updated the encoding from ‘UTF-8’ to ‘GB2312’ in the three files below, and restarted the SOA service, the DVM in Chinese appeared on ESB control.
But when I adding the second row in Chinese and save it, then restart the SOA service, the DVM in Chinese disappeared from ESB Control once again. Because the encoding in the three files below is updated from ‘GB2312’ to ‘UTF-8’ .
Files:
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm\Chinese.xml.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\content\files\dvm\Chinese.xml_1.0
How to change the default save encoding of the dvm files when create dvm in ESB control ???

I have the same problem. When I updated to Mavericks now the bookmarks bar font is huge. I liked it the way it was before. I liked the smaller font. Also wish I could change the color of the sidebar and font/folders too.
I tried to see in preferences if there was anyway to change it, but I don't see anything there.

When I close Photoshop CS6, the following message appears: "Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file.

When I quit Photoshop CS6, the following message appears:
" Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
If I try to change the Workspace in PS6 from Essentials to any other Workspace, the following messsage appears:
"Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
I have checked the Sharing and Permissions section of the "Get Info" panel accessed from the Finder and I have set Read and Write Privileges for my user account for Photoshop CS6. System and Admin are also set to Read and Write.
I have a MacBook Pro with OS X Version 10.9.5 and have all available updates for Photoshop CS6, Lightroom 5 and Bridge CS6.
I tried uninstalling the program and downloading it again and reinstalling, but nothing changed.
Can you help?
Thanks,
cjpnm

You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

Firefox will open 4 or 5 tabs fine, but then will not load any further websites after those first 4 or 5, or allow you to refresh one of those first tabs -- including about:config and the addon page

Firefox 5 worked fine. I installed Firefox 7, and when I ran it, tabs would just say "connecting to..." and hang. Restarting did not help. Websites open fine in IE and Chrome. Disabled all firewalls and antivirus, did not help. Uninstalled and reinstalled Firefox 5, everything worked fine again. This was using Vista 64-bit.
Upgraded to Windows 7, uninstalled Firefox 5, installed Firefox 7, had same problem. Uninstalled Firefox 7 completely (including the profile information, I saved that information in another folder), restarted computer, and installed Firefox 7 using a completely clean profile. Did not install any add-ons, checked to make sure all plug-ins were up-to-date, and updated plugins.
Now when I start Firefox, I can load 3 or 4 or 5 tabs fine -- after those first few tabs are open, I cannot open or refresh any other tabs -- including about:config and the add-on manager -- I have to restart Firefox. The hangup doesn't appear to be related to what websites I am attempting to open, but it looks like the number is the problem. I have run through all of the FAQ procedures, including changing the max number of network connections to 48, and the problem does not seem to go away.
As a side note, I had this same problem when I tried to go from version 5 to version 6 as well. Version 5 is the most recent version that worked on my system.

Can you try Aurora - download it from http://www.mozilla.org/en-US/firefox/channel/
And let us know how it works.

Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q with a real time mode but it is not working but when i run it with uploading it into the PXI it save in to the file

Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
Attachments:
PWMs.vi ‏130 KB

other problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

16bit? Pixels extending beyond the canvas? (from a crop with delete unused pixels turn off). Have you previously been saving PSD files?
IME you sometimes have to tell Photoshop that the first save of a session is JPG, and it remembers from there on. The way to 'tell' Photoshop that JPG, or PDF, or PNG etc are now your preferred format is to Ctrl (Cmd) click on that format in the Save As drop down list. So long as the file does not have parameters that your chosen format does not support, then this should work for you.
[EDIT] Just noticed that you did include 'Crop' in the subject line. Do you have 'Delete cropped pixels' checked?

I imported an existing form but I do not want to save it to the cloud but save locally. How do I change the imported file that is saved on the Cloud to storing locally?

I have imported a PDF document and it automatically saves it to the cloud. I want the imported form to save locally? Is there a way to change an imported document from cloud to local?

Hi urs.boeschenstein,
Files are automatically saved to your online account when you use the Acrobat.com online services. However, you can most certainly download the files to your computer, by selecting them at https://cloud.acrobat.com/files, and then clicking the Download icon.
Are you having additional issues with your subscription?
Best,
Sara

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

Save config in the wlc4402

Similar Messages

Maybe you are looking for