Save configuration after fixing discrepancies with CM.

How can I save running configuration after fixing discrepancies?
Thanks.
Regards.
Andrea

Sounds good!
I'm looking for a flag or application setting on Campus Manager to save configuration. After a fix runnnig and startu are out of sync.
Thanks.
Regards.
Andrea

Similar Messages

SF300-24 is not saving configuration after reboot

Dear All,
I have a couple of SF300-24 switches. When I made needed configurations using CLI or GUI and then saved all configurations. The problem is that switches do not save configurations after reboot. Please assist.
Thank you in advance

Hi Vsevolod,
I guess you have performed the function to copy the running configuration to the startup configuration as per the screen capture below.
The current released version of code does not have a supported CLI only a menu accessable via console, SSH or telnet. New code coming out this month supports a CLI, so I am surprised by your comments regarding CLI.
If you have a early beta release of software version 1.1 with CLI, I would suggest you call into the Small Business Support Center to get the problem looked at.
I am using the beta code on my ten port SG300 and 48 port SF300 , but had no difficulty saving configurations in old or beta versions of firmware.
If you are still having trouble after reading this post, please contact the SBSC at ;
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
regards Dave

Cannot save the configuration after zone changing.

The customer is trying to save the configuration after a Zone changing. The error message is the following:
# copy running-config startup-config
2008 Oct 10 13:22:45 SW1SU %ZONE-2-ZS_INIT_FAILED: Failed to save persistent configuration
2008 Oct 10 13:22:45 SW1SU %ZONE-2-ZS_INIT_FAILED: pss_create failure, code = 0x8048001e, URL = sync:/mnt/pss/zone_zs_active_zset_cfg
2008 Oct 10 13:22:45 SW1SU %SYSMGR-2-CFGWRITE_ABORTED: Configuration copy aborted.
Configuration update aborted: request was abort
or
#copy running-config startup-config
2008 Oct 10 13:22:45 SW1SU %ZONE-2-ZS_INIT_FAILED: Failed to save persistent configuration
2008 Oct 10 13:22:45 SW1SU %ZONE-2-ZS_INIT_FAILED: pss_create failure, code = 0x8048001e, URL = sync:/mnt/pss/zone_zs_active_zset_cfg
Does someone has any idea how to solve this problem?

The root cause is the compact flash card. There was a software fix attempted in 3.0.2 but is not 100%. If the problem shows up again, the reload will clear it, but the ultimate fix is to replace the compact flash card with a new one. In some instances, based on your service provider, this may be a complete chassis replacement. This requires license re-homing as licenses are tied to the chassis serial number. I believe it has to do with the number of writes to the CF card. At some point, the card goes into a read only state and reload is the only option to clear it.

After Scanning a document, cannot save it in Acrobat X with Windows 7

Using Windows 7 a Kodak i40 scanner and Acrobat X Pro. Document scans normally and image appears in Acrobat, however when selecting save or save as, nothing happens. "Save as" does not open any windows. If you try to close the document, it asks if you want to save it, click on yes and it does nothing, then try to close and the "do you want to save" message appears again and document is not saved. Anyone else see this or have a suggestion for a solution?
Bob

As a work-around, I am able to select custom scan but you have to choose your scanner and after doing that click the options and change scan mode from native to memory. This will allow you to scan and save or "save as" but after you close Acrobat the settings will revert back to what they were before. I have even configured and saved presets with these same options but these settings are never saved when i close and re-open Acrobat

I have to keep turning on an off the wi-fi connection to connect to my network after system shutdown with mountain lion, I did not have to do this with 10.6.8 before I upgraded, is there a bug fix in the works?

I have to keep turning on an off the wi-fi connection to connect to my network after system shutdown with mountain lion, I did not have to do this with 10.6.8 before I upgraded, is there a bug fix in the works?

Many have posted this fix:
Go to System Preferences > Energy Saver > Computer Sleep ... set to anything greater than the 15 min. default setting.

Macbook Pro won't login after sleep (sleep with low battery -- mac turned off maybe it's called save sleep)

Macbook Pro won't login after sleep (sleep with low battery --> mac turned off maybe it's called save sleep)
So if I hit the powerbutton my mbp booted like it is booting from the save sleep (so very fast and the login screen is there in about 10 sec.and there is no apple logo while booting just the desktop screen in "unsharp" ore foggy however...)
Then when i see the login (if the keyboard backlight turned on) i wand do tipe in my code but it won't work... the trackpad is not working; and when i plug-in a usb mouse the mbp is not powering on the usb-mouse (laser is off)
Why is that this way?
Is there n option to wake up the mbp fromm deep/save sleep without haveing issiues after that?
THX

Sorry for such a long delayed response...
I was able to get to an apple store this past weekend, and let me tell you... I'm about finished with there great "support".
Right before I went to the store, I tried to eject a disk. Well the cloth in the SuperDrive (I assume to protect the drive from dust and such) Pulled up with my disk. So I get the Apple store, describe my problem and what happened with the cloth piece. The "Genius" writes up a form and tells me they have to run diagnostic and it will take a couple days... and I will get a call when its done (1-3 days).
Well on day number 3 I called up the store and they told me it was ready to be picked up? I asked if anything had been fixed and they told me they could not reproduce my "sleep issue", so they couldn't fix that.. but told me the cloth piece in the SuperDrive had been fixed.
I drive an hour (one way) to the Apple store to find that all they did was PULLED OUT the cloth... they did not replace it! So basically I have a hole for a Super Drive.
I asked why I was not called to say that my computer was ready to be picked up... didn't get an answer on that one.
I asked why my SuperDrive was said to be fixed, when nothing was done... they told me that it would have to be sent out to the factory store for that to be fixed (FIRST TIME THEY MENTIONED THAT!) Oh, and that would take 5-7 business days. Well that's not going to happen right now considering I'm a college student that NEEDS a working computer!
So I go home, angry... start just putting all my important documents back on the computer. And the screen starts blinking!!!! I guess now I have the same thing described in another post on these forms...
Lets just say that I'm not very happy with Apple right now! If anybody else has success on either the sleep issue or the screen blinking issue, please let me know!
Thank you!

Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing!

Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

After a tryout with AdBlock, the videos on Facebook, on BBC and on some others websites stopped working and there's always a message asking me to install the latest version of the Flash Player. Even though it's already installed. How can I fix that?

After a tryout with AdBlock, the videos on Facebook, on BBC and on some others websites stopped working and there's always a message asking me to install the latest version of the Adobe Flash Player. Even though it's already installed the situation remains the same since the last month.
Can I fix that just doing the upgrade for the Yosemite?

Well, after hours of trying to figure it out I gave up and un-installed and re-installed that last verion of Adobe Flash Player and now it seems I can play games again in Messenger. Everything else had been fine just that. I can only figure it was because it was having a hard time updating the first time and took me 3 tries. So even though it said it was installed, apparently it wasn't done correctly.
Though when I couldn't figure out what was wrong at first I looked and checked to see all the things were enabled that were supposed to be and they were.
I even tried to go to the Adobe site and download the last version I had and couldn't find it. Kept coming up with the new version. Others said if you download a particular older version it may not have all the security features in it.
This really gets to be a bit much, especially when you're by yourself and have only a smattering of knowledge of technical things.
Thanks fore responding to my question.
DFelice

After getting 4G with AT&T I am unable to join my network and get the error message: Unable to join the network "Jude". How do I fix this? Thank you

After getting 4G with AT&T I am unable to join my network and get the error message: Unable to join the network "Jude". How do I fix this? Thank yo

Try power-cycling your wireless router (unplg for 30 seconds, plug back in). Here's a longer list of troubleshooting steps: http://support.apple.com/kb/TS1398.

After going online with an existing 3.0 application with ver 3.2 configurator all comms stopped

After going online with an existing 3.0 application with ver 3.2 configurator all comms stopped.
Hardware 1788-CN2FF

Could you give some clue more detailedly?
What you did? any errors?
Ryan Shi
National Instruments

Reinstalling AE and PP due to an error with dynamic link. Where do i find the program install? And tips on how to reinstall without messing things up? last question is, does my recent files and saves work after the reinstall?

I have allready bought the programs, but need to reinstall AE and PP due to an error with dynamic link.
Where do i find the program install?
And tips on how to reinstall without messing things up?
last question is, does my recent files and saves work after the reinstall?
Thank you

karianne wrote:
I have allready bought the programs, but need to reinstall AE and PP due to an error with dynamic link.
Where do i find the program install?
Which versions? Which operating system?
Try Download and Installation Help

The crystal screen of my ipad mini broke after I accidentally droped it. Does anyone know if it can be fixed directly with Apple? How much will it cost to get it fixed/replaced?

The crystal screen of my ipad mini broke after I accidentally droped it. Does anyone know if it can be fixed directly with Apple? How much will it cost to get it fixed/replaced?

"Abuse" includes dropping it. If it's not a manufacturing fault: These prices are roughly the same in other coutries to the US.
Out-of-Warranty Service     If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below.
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
     A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
          Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service.
Apple reserves the right to determine whether or not your iPad is eligible for Out-of-Warranty service. Replacement iPads have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see the AppleCare+ for iPad and Apple Repair Terms And Conditions for further details.

Can I reconfigure iPads using Apple Configurator after previously being setup with iTunes?

Can I reconfigure iPads using Apple Configurator after previously being setup within iTunes?
Will VPP Codes be able to be reused? Can I restore to a backup made in iTunes?

Can I reconfigure iPads using Apple Configurator after previously being setup within iTunes? Yes.
Will VPP Codes be able to be reused? From iTunes - No.
Can I restore to a backup made in iTunes? You can back up an iPad that was set up in iTunes in Configurator and use that as back up in Configurator.

After upgrade to Lion, iPhoto will not save events nor save albums after created.

After upgrade to Lion, iPhoto will not save events nor save albums after created. Once iPhoto is shut down and re-launched, albums and events created no longer exist. How can this be fixed?
Also, when attempting to create cards, iPhoto freezes.
Message was edited by: askgabe

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Save configuration data inside order processing

Hi all,
does anyone know how to save configuration data during the order processing but outside the configuration itself?
Problem:
- we cannot use the BAPI_CREATE_SALES_ORDER because we are inside the order processing which locks the order for the use of the BAPI.
- we recieve information after the configuration is finished that has to be saved in the configuration, too. At this point we can no longer use the user-exits of the configuration.
Do you have an idea whether there is a function module that could be used, or is there any sample coding out there?
Any help apreachiated.
Best regards.
Norman

you can chnage the variant configuration data using below bapi with strcture    order_cfgs_value      =
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
    EXPORTING
      salesdocument
      order_header_in       =
      order_header_inx      =
       TABLES
      return                = return_lt
      order_item_in         =
      order_item_inx        =
      partners              =
      partnerchanges        =
      partneraddresses      =
      order_cfgs_ref        =
      order_cfgs_inst       =
      order_cfgs_part_of    =
      order_cfgs_value      =

Save configuration after fixing discrepancies with CM.

Similar Messages

Maybe you are looking for