Save custom print package

I recently purchased Lightroom 3 because I assemble my pictures in albums consisting of photo collages. I recently switched my photo processing from PSE 8 to Photoshop CS5, primarily because Elements is not a 64 bit program. I purchased Lightroom 3 beause I read of it’s versatile picture package capability. Amazon also made it affordable. My problem is I am on a steep learning curve with two complex systems at the same time and currently can’t make Lightroom do what I think it should do. Namely save a created custom picture package. I have 2 issues.
After creating a custom picture package, I want to save the collage in my album folder, either as a Tiff, jpeg or PSD file. I can’t seem to find any way to do that and a search in the help file reluctantly leads me to the conclusion it can’t be done.
Secondly, I discovered, other than a name plate, there apparently is no way to add text to a picture package. I sometimes like to add talk bubbles and descriptive text to either the pictures or the background. If I could save the picture package or export it to CS5 I would do this in CS5.
I have to believe I am missing something because I can’t imagine Adobe would provide the ability to create a custom picture package and not the ability to save it as an image. My recollection is that Elements does, why not Lightroom?
I know I can save templates, but I want to save the composite image. Please, someone help

_marc_b_ wrote:
If you scroll down to the bottom of the right-hand panel in the Print module (Print Job), you can choose "JPEG File" from the "Print to:" pull-down menu. TIFF and PSD aren't possible, AFAIK.
That is correct, jpegs only to export from the print module. Although you could print to a PDF which may then be editable in PS.

Similar Messages

How to print Photo Info in the Custom Print Package

I am using LR CC, latest version on a Windows7 PC.
I am trying to print Photo Info in the Custom Print package. I have no trouble selecting Photo Info in the Single Image/Contact Sheet Layout Style, but when I switch to the Custom Print Package, the Photo Info check box in the Page panel, disappears. I can't find any reference to this in the manual as to why this would occur, or not be available.
Appreciate any help with this matter.
Best Regards
Steve

Hi,
Have a look at: Lightroom Help | Print module layouts and templates
Only on the Single Image and Contact Sheet layouts can you " ... print information about photos, such as the filename, title, caption, and keywords ..."

Is Custom print package "rotate to fit" still not implemented?

On Dec 2, Al-R started a discussion thead for LR3 beta about a problem he was having with rotating an image to fit a frame he created using the Custom Print Package. He couldn't get the image to rotate to fit. I get the sense that the "rotate to fit" check box wasn't available. I never downloaded the beta of LR3 so I don't know this for sure, but that seemed to be the case based on the dialogue in his thread.
Ian Lyons solved the mystery by pointing out that the Custom Print Package feature was not complete in the beta, and that Rotate To Fit was one of the things that hadn't been implemented. He said he expected it to be implemented in the final shipping release.
While the Rotate To Fit check box is now available in the Custom Print Packate (shipping version 3.0), it doesn't have the intended effect. When dropping a portrait image onto a landscape frame in the Custom Print Package, the frame is ignored and the image expands to fit the paper size. Checking Rotate To Fit on and off has no effect. The only work-around I have found is to rotate the image prior to dropping it on the frame. Once the orientations match, the image fills the frame properly.
Is this a case of the feature not making it into the final release, or is this a bug, or am I missing something really important here?
Thanks for your help,
Charlie

What OS?
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

How to set and save Custom Print Settings in Aperture?

How to set and save Custom Print Settings in Aperture
Hi,
I am printing 12x18" images on 13x19" sheets. I find it difficult to enter the 13x19" dimensions because each value jumps to another random value when I move to enter the second dimension. For instance 13 jumps to, say, 8.5 as I type 19 into the second box. Same with the sheet dimensions.
Also, when I finally get it all correctly, the margins don't set themselves automatically - which I would I expect.
Then, even though I save the setting by clicking Save Setting at the gear below, next time I turn Aperture on, it's all gone.
Any ideas? Thanks.
Raphael

For me, it is working with these settings, Raphael.
Does your image have a 12x18" aspect ratio? You may want to crop it to the desired aspect ratio before printing.
I can only test with Aperture 3.6 on Yosemite 10.1.

Converting colour profile of final print package before printing

How do I convert the colour profile of a Lightroom custom printing package from Adobe Prophoto to sRGB before printing? For that matter, how do I save the thing? I have no interest in saving the template, or the collection separately, since neither has any use without the other. And without saving them as one finished item, I have no way to convert the colour profile of that item. I can see clearly from the appearance of the print preview that the above mentioned colour profile conversion is required.

You cannot change the profile in Lr to <sRGB>.
If you want to print sRGB, select <Managed by Printer> for Color Profile under Color Management.
Then in your printer's dialog select <sRGB> instead of <Application managed> (or similar wording - depending on your printer).
BTW: the term is not "Adobe proPhoto" it's "proPhoto RGB".

Lightroom 2.7 custom photo package printing

When I try to print a custom photo package (multiple 4x6 images) on 16x20 photo paper, the individual prints come out slilghtly different in size relative to the 4x6 format. I am using bordereless printing on a 16" roll (epson 7800) and I snap each pic to pic on the layout. The interior pics print 1/16"oversized of the 4x6 size, the edge pics print undersize by 1/8". When I reduce the number of pics on the layout and leave a gap between each pic on the layout the pics print all oversize by about an 1/8". The lightroom print controls; Photo Border is not checked, Inner Stroke is not checked, Zoom to fill is checked.
My question is- Can lightroom 2.7 print actual 4x6 prints using the custom photo package w/borderless printing? If I layout four 4x6 pics side by side so that the entire width of the 16" paper is used, can I get lightroom and my printer (epson7800) to actually print each borderless photo exactly 4" instead of oversizing the two inner pics and thus shortening the two edge pics due to the oversizing of the two inner pics? Am I missing an adjustment I need to make on the printer properties or the lightroom page setup? Thanks for any help.

You may need to download the package again.
Make sure that you have administrative rights/credentials on this computer.

In CMOD Wht ever I did , Shuld I need to save in SAP package?

Hi Experts,
pls. one simple doubts that,
When I am trying to do <i><b>FIELD ENHANCEMENT via CMOD->MENU->GO TO->TEXT ENHANCEMENTS->NEW DE cust...???</b></i> its not allowing me to save in Z_MY_SD_PACKAGE, (its prompted me to save in SAP package; mine KATR6 field relavent is BV package)
1 - So, Shuld I save it SAP package?
2- I mean, Wht even we did in CMOD, Shuld we need to save in SAP packages, NOT in Z_MY_PACKAGES??
thanq.
Message was edited by:
Srikhar

So, Shuld I save it SAP package?
2- I mean, Wht even we did in CMOD, Shuld we need to save in SAP packages, NOT in Z_MY_PACKAGES??
If you modify the sap standards then you should not give custom(Z) type of package.
Simple example - I have done many things to sales order user exit.
MV45AFZZ Include is the sap standard include,if you modify this include,system will not prompt Package,it asks directly Transport request.
Your case i do not know since i did not your user enhancement.
Srikhar ,
Personal note : Once you get solution,Please give answer,so that other's can use..
Thanks
Seshu

Printing Multiple images on one sheet of paper ( Printer Package)

I want to print multiple different images on one sheet of paper using PhotoShop 6 Printer Package, (operating system windows7 h/p) I have figured out how to get multiple images of the same image on one sheet, but not two different images.
I seen these instructions on the web and can do 1.2.3....4. has me lost. I think this may work for me, unless there is another method that is easier.
Important: Mac OS X users much first apply an update to Photoshop before attempting to customize the Picture Package layouts. Information and and a download link can be found at [url]http://www.adobe.com/support/downloads/[/url] (Thank you Matt Jones for this tip!)
Copy the next five lines and paste them into a text editor, like NotePad or SimpleText:
I 8 10
Letter (3) 4x6
0 0 6 4
0 4 4 6
4 4 4 6
Name this file FourBySixes.txt
Copy the file to your Adobe\Photoshop X.0\Presets\Layouts folder where X represents your version of Photoshop.
Open Photoshop and try it!
I copyed #3 and save to my documents, but I can't figure out how to do #4, or where the Adobe X.0\ Presets\Layout folder is at, if you could dumb this down for me I would be very grateful.
thanks

I can only guess that Photoshop 6 under Win7 would have the layouts under Program Files (x86)\Adobe\Photoshop 6\Presets or thereabouts. This is the Photoshop Elements forum, you may want to try the full Photoshop forum: http://forums.adobe.com/community/photoshop/photoshop_windows
Juergen

I'm running Adobe 9 pro on snow leopard and when I save or print from word for mac 14 the bottom gets cuts off

I'm running Adobe 9 pro on snow leopard and when I save or print from word for mac 14 the bottom gets cuts off. Can someone help?

Ah! You're creating a PDF out of Word through Acrobat. The cutoff is most likely being affected by the printer chosen.
When you call up the print dialogue in Word, check to see what printer is being used. If it's a typical inkjet printer, Acrobat is using the print margins of that printer as the cutoff area. Since most such printers can't print to the last inch and half or so of the paper, that's where it would be cut off.
Near the bottom, under the preview of the document, click on the Page Setup button. It doesn't really matter which printer you select here. Under Paper Size, choose Manage Custom Sizes. Under the Non-Printable Area heading, choose the same printer and set the paper size you're using.
Note that the unprintable margins for that printer will be filled in automatically. That's what's being cut off. Click the + button to create a modified version. The default will be "Untitled". Give it a new name if you want. Then set all of the margins to zero. Click OK. Now you'll have that as a choice under Paper Size. Doesn't matter that the actual printer can't use this setting since you're going to a PDF. Click OK to get back to the main Word print dialogue.
Now choose Save as Adobe PDF. It should give you an exact duplicate of what's on screen in Word since as far as Acrobat is concerned, your "printer" has no unprintable margins.

CS6 cant save the printer driver settings

The problem is similar to this http://forums.adobe.com/message/4431235#4431235
Illustrator simply does not save any of the settings in the driver tabs (such as custom print sizes, paper tipe, source tray etc) unless I hit the Print button (e.g. I cant save those settings temporarily by pressing the Done button nor I can save a print presset for a later use), and that is a very very very annoying thing an it brings back some memories of the time I upgraded to CS and CS2 and the case then was even worse because it didnt save the printer driver settings even by printing and allways reverted to the default settings, and now I remember why I hate Adobe so much, because they never had a fix for that until CS3 came out.
That issue has been tested with XP 7 Vista both 32 and 64 (a lot of printer drivers) and it is not a single configuration problem, so please before asking some questions about the kind of the system and software etc do the following with your CS6 (or CS,CS2) and please tell me what happens. Choose File->Print and in the dialog choose whatever printer you have, press 'Setup...' button in the lower left corner, ignore the stupid prompt that some unknown Adobe genius tech invented, press Preferences button in the new Print window that pops up and in the printer driver UI window choose whatever setting you like that differs from the default setting, and then press Ok then Print and in the main Illustrator print dialog pres Done (but not Print if you are in CS6) button to close the dialog. Then open the Print dialog window again, navigate to the printer driver you just adjusted and please tell me what settings you have - those that you adjusted or the default settings. Thank you in advance!

Thank you for the responceq Johny_07, unfortunately it solves the problem only if I have to specify the size of the media, but I need to specify the source tray, paper type and so on, parameters that are not present in the dialog box, and those are not remembered by Illustrator also. Do you experience that problem, I have allways wondered why there is no info concerning that problem, is it happening only with my instalations or it is a general program bug.

Custom Printing Size for 5520

Hello,
I have a HP 5520 and a Mac computer with a OS X 10.6 operating system. I'm trying to create a custom paper size to print a 5.25 x 5.25 in card. This isn't a typical paper size and am having trouble figuring out how to create a custom paper size. I know that I can do it because I've done it in the past but unfortunately do not remember how I figured it out. Any help and step by step instructions would be very much appreciated!
Thanks!

Hi @tbot0712,
Welcome to the HP Forums!
I understand that you are trying to create a custom printing size on Mac OS X 10.6 for your HP Photosmart 5520. I am happy to look into this for you!
According to this guide, Create Custom Paper Sizes in Windows 7, Windows 8, and Mac OS X. Follow these steps to create and use a custom paper size in Mac OS X.
Step one: Create the new custom paper size
Load the custom-sized paper into the paper input tray.
In the software you are printing from, click File, and then click Page Setup.
From the drop-down list, select the name of your printer if it is not already selected.
Click Manage Custom Sizes in the Paper Size drop-down menu.
Click New, and then type a name for the custom paper size in the Paper Size Name box.
note:
Do not use an existing paper size name for your new custom paper size name. For example, if a custom paper size is named A4, then the existing A4 paper size is no longer be available as a choice. Use a different, unique name for the custom size paper.
In the Width and Height boxes, type the dimensions and set the margins, if desired.
Click Done or OK, and then click Save.
Step two: Select the new custom paper size
Click File, and then click Page Setup.
Select the new custom paper size, and then click OK.
Click File, and then click Print.
Select the Paper Handling panel.
Under Destination Paper Size, click Scale to fit paper size tab, and then select the custom paper size.
Change any other print settings, and then click OK or Print.
Hope this is the information you were looking for, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Want to save multiple printer settings using an OfficeJet 8600 and Windows7

I recently bought an OfficeJet 8600 to replace an old OfficeJet L7590. I'm dismayed to discover that the new 8600 does not have the ability to save multiple print configurations. Using the L7590, I was able to combine paper size, orientation, print quality, colour/B&W setting, duplex, etc. and save with a custom name. It was then easy to select from a range of preset configurations each time I printed. Now, on the 8600, I have to dig three layers into the menu and individually set each one of the options - EVERY TIME I PRINT! It seems that Mac users still have the ability to save configurations, at least in a limited way, but not Windows users. What gives?

The default settings can be set as follows: Click Start, Devices and Printers, right click on the Officejet 8600 and select "Printing Preferences". Make the changes you would like and Apply.
The L7590 driver is likely compatible with the Officejet 8600, you could also just install the L7590 driver and change the "port" settings to point at the 8600. You could then use the features you like... Post back here if you want to try this out, I could provide more details.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to Create the Custom print Quote Report ?

Hi All,
I want to create the custom Print Quote report . I know the below details and referred the below metalinks .
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1.
Oracle Metalink:
Note: To add a column to the print quote report, following files need to be updated:
LinesVO.xml --- xml files containing the sql query and attribute definition
LinesVORowImpl.class - public class extending the framework class OAViewRowImpl.
This class contains the set and get for the attributes defined in xml file.
ASOPRINT.xsl - this is the xsl stylesheet file used to describe the report layout.
This file needs to be modified to include the new column being added to the report
QUESTION :
My question is,
1. wether my approach (below iare the details)of trying to extend the PromptVO is the right way or is there any other way to add the new columns.
I want to add new fields on to the report . When i looked into the it says the below
Here we find that to add a new column, oracle says to update the LINESVO.xml, do they really mean to update the base files.
This report uses following VO's
PROMPTVO
HEADERVO,
LINESVO.
To create new Headers & Prompts, i tried extending the PROMPTVO. Once the extended VO is substitued , i dont even get the data for standard oracle Prompts. is this the right way to add columns?
Thanks

Hi All,
I want to create the custom Print Quote report . I know the below details and referred the below metalinks .
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1.
Oracle Metalink:
Note: To add a column to the print quote report, following files need to be updated:
LinesVO.xml --- xml files containing the sql query and attribute definition
LinesVORowImpl.class - public class extending the framework class OAViewRowImpl.
This class contains the set and get for the attributes defined in xml file.
ASOPRINT.xsl - this is the xsl stylesheet file used to describe the report layout.
This file needs to be modified to include the new column being added to the report
QUESTION :
My question is,
1. wether my approach (below iare the details)of trying to extend the PromptVO is the right way or is there any other way to add the new columns.
I want to add new fields on to the report . When i looked into the it says the below
Here we find that to add a new column, oracle says to update the LINESVO.xml, do they really mean to update the base files.
This report uses following VO's
PROMPTVO
HEADERVO,
LINESVO.
To create new Headers & Prompts, i tried extending the PROMPTVO. Once the extended VO is substitued , i dont even get the data for standard oracle Prompts. is this the right way to add columns?
Thanks

On my new Imac, I had the trial version of Pages, and saved some files in it. Now I have purchased the full version from Apple via a download, but I cannot save or print the old files, please help!

On my new Imac I saved some files on the free trial version of Pages, since downloading the full version from Apple, have been unable to save or print from old files saved when using the trial version. Any ideas? Thank you!

My guess is the 30-day trial period has expired but you didn't remove the trial before installing the full version. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.

Pages 09 is installed. But on the received e-mail was not a serielnr for activating pages so i cannot save or print any document.

I have downloaded Pages 09 on the i-Mac with the Lion version.
In the e-mail for confirming was mentioned an Ordenr....... and a long nr of 12 figures......
After making a document,it was not possible to save or print out.
I get a sjabloon with the text that I have to activate iWork first.
Next click gives me the sjabloon that i have to buy the complete version iWork!!!!!
or to fill in the serialnr of Pages mentioned in the sended e-mail from apple store.
I have tried that long nr (in case that this is the productserialnr....) but no any result.
Apple-store employees were not able to help me.
Where can I find the serialnr...as nr in the email was not working.
We have also tried with apple employee to remove Pages of the computer and empty the trash
for complety removig,but....... we still keep the message that Pages is INSTALLED.
So long we have this message we cannot re-downloadin program Pages according the apple employee!!!!
Apple is not able to solve this problem.
In mean time I have used my back up and also controlled the e-mail.
Pleas help me
Thank you
Martin Duynstee
[email protected]

This might be simple but it works well for me.
1.
Right click on the tool bar in IE8 and uncheck adobe PDF to disable. Click yes when it ask if you are sure.
2.
Open Adobe
READER located in the start menu.
3.
Click on Edit and then on Preferences.
4.
Select the "General" category.
5.
Click on "Select default PDF handler"
6.
Adobe Reader should be already selected. Change it to reader if it is not.
7.
Click on "Apply" and except changes.
8.
Restart the computer and you are done.
Now you can open and save PDF's from IE8. Once you save it, you can right click and "open with" Acrobat if you choose.
Be careful to not make Acrobat the default or you have to start over.
You can still create PDF's from docs, scans, and picture like before. You might think this is a work around but it really isn't.
Some forms that are available on the internet can't be opened by Acrobat for security reasons.
Good luck! P.S. I am not an IT tech but I play one on TV.

Save custom print package

Similar Messages

Maybe you are looking for