Save data issue

I am new to form building and have been working on an interactive form to submit OR Surgical booking requests from the physician offices to the surgical scheduling office. I have run into a few roadblocks and have not found my answers on the help menu so I am looking for someone who would like to offer their assistance.
. The form is intermittently not saving all data when sent back and forth.
. Can there be a drop down list box that permits multiple selections.
. Can there be a hyperlink connecting a response to one question to additional questions.
If there is someone out there willing to assist this not new nurse with new technical skills it would be appreciated.
Thank you,
Alison
[email protected]

The form is intermittently not saving all data when sent back and forth. <answer> Are you using Reader ...how is the dat being passed back and forth? . Can there be a drop down list box that permits multiple selections. <answer> DropDown list can only have a single selection but choicelists can have multi-selections . Can there be a hyperlink connecting a response to one question to additional questions <answer> not a hyperlink but you can direct the cursor to go to another field by using the xfa.host.setFocus("target fieldname")

Similar Messages

Unable to SAVE data through a data form in Hyperion Planning

Hi,
I recently migrated an application from development to QA using the LCM tool and refreshed the outline into Essbase using Planning Web. Once completed, i loaded the level0 data and aggregated it.
I opened a data form and tried to SAVE data and i get an error stating: "There was an error during the save process".
I tried saving the data using another form and i was successful at it. I re-migrated the data-form i was having an issue with and tried again. Thist time I get an error "Communication error with server. Callback failed for data entry page". This error shows up now on every form and every application.
Any suggestion on how to fix this?

I don't know if that patch will help you or not. It addresses a specific issue related to text data types. Your issue sounds similar, in that it appears to be triggered via the existence of specific data. The issue we were describing above presents itself when opening the form, and not when saving the form. I'm just guessing here, but it sounds as though there is some type of mismatch between the data types that Planning is expecting to display and save on the form, and the format of the existing data in Essbase.
You said that you can't save the form once the data is loaded into a particular version. Here's what I'd do to narrow the issue down:
1) Copy the data into your version so that the form will NOT save. (ensuring that the issue is present)
2) Start selectively deleting data from the version. Write a quick calc script that clears certain data, account, by account.
3) After each selective delete, make a note of the account you cleared. You'll only need to clear accounts that are present on the form.
4) After each selective delete, refresh the form, and then try to save.
At some point, I expect the save will be successful. You'll then know what data was causing the issue. I'm guessing that this data (probably a specific account) will have a data type that doesn't match up with the data in Essbase. It could be defined as a Smart List that wasn't migrated. Or a text value that doesn't exist in the app repository. Something like that.
Hope this helps,
- Jake

PDF form created in Idesign CS6 won't save data when filled out

Why can't users save data in fillable PDF form created in IndesignCS6
Hi
Please help I've tried every forum and tried everything you are my only hope ive created a Interative PDF form In indesign cs6 and when my clients fill it out it doesn't save the data, also ive put it online and again the same and the submit button doesnt work, ive tried the advanced save in Acrobat and still the same what am i doing wrong GUTTED

I designed in InDesign, exported as Interactive PDF, opened in Pro, saved with extended options.
I have both Pro XI and the most recent version of Reader. (Mac os x)
I actually used a template to design the form. Would this somehow be causing an issue??
Here's a link to the form-- (website is still being developed.)
http://media.wix.com/ugd/258c13_937630036a284d0ebfcccd8aa9169cf2.pdf
I've uploaded to the new website, and to Box, and the issue remains the same.
Thanks for your help!

Problem with Save data with report

Post Author: ramprosoft
CA Forum: General
Hi,
I am new to CR and using Crystal Reports XI with SQL Server 2000.
I'm not able to remove the saved data in a report. I have played around different options, but unfortunately I'm not able to remove the data. I have checked variouse places in web above this issue not able to find a solution, so decided to open a new post. The problem is :
I have created a simple report and saved with-out data (1st version) the file size was 16KB. After few changes I have saved the same report with Data, the file size become 1065 KB. Its perfect and I can view the report in Report Viewer. Great Stuff!. Now the Testing completed, I would like to move this report to production environment, I notice that I'm unable to remove the data. I have played around various tricks like below, but it didnt work well.
Trick 1:
Uncheck: File->Options->Reporting (tab)->Save Data With Report.
Check: File -> Options -> Reporting (tab)->Discard Saved data on Open,
Uncheck: file-> Report Options -> Save Data With Report.
File -> Save Data with Report (Not selected)
Opened the report and try "save" and also tried "save as", still the size is 1065.
Trick 2:
I enabled all "Save Data with report" feature. Deleted all the rows in the table related to the query, previewed the report and Saved the report with "Save Data with report" featuer. But now, the funny part happen, the file size increased to 1070kb, instead of reducing. Worst Stuff!!!
Trick 3:
Updated the latest version of Patch and tried above tricks, still i'm not able to remove the data.
Appreciate, if you could help me to fix the problem.
thanks in advance

Post Author: salmanq
CA Forum: General
Hi, This
post is very informative, however I would like some specific information. If
someone can help me then please send me a private message. Best Regards,
Wholesale Pages UK Dropshippers
| Wholesale Suppliers
Australia Wholesalers and
Dropshippers | Dubai Property and Real Estate

Some able to save data in my pdf, some are not...

I have created a pdf for company use - it's a purchase order form - and about half the company can open it, edit it, save their data, and email it back: perfect. The other half are unable to save to the document. They can open it and fill it out, but they can't save the data anywhere. Some of those having troubles are using macs, some are using PC. Help!

This may not be an implied share issue. Check out this except from the Hyperion Planning Admin Guide:
Caution!
Do not design data forms in which label-only parents follow their first child member, as you cannot save data in the first child member. Instead, create data forms with label-only parents selected before their children, or do not select label-only parents for data forms.
To see if this is really your problem, remove the label-only parent from the form. Try your save again, and it will work.
Another way to test this is by recreating your form in the Excel add-in. If your save works in the add-in, but not in the form, this is your problem (and it's not an implied share issue, which would also affect the spreadsheet add-in).
Hope this helps,
- Jake

How do I save data BPC 10.0?

Hi experts,
I'm trying BPC 10.0, after I create a standard modeling, and trying input data from EPM add-ins for Excel, I find the save data button is disable, how can I enable this button?
best regards!

Hi,
I had the same issue, in my case the cause was this: Although I had teams and task as well as data access profiles defined correctly, and my user properly assigned to the team, my user was NOT inheriting the authorisations from the team. It was ok after I assigned task and data access profile manually to the user directly.
May be worth a try.
Cheers
Matthias

No "save data with report"

Hi
I have a report with prompts... I saved the report with "_save data with report_". If i didnt do the "save data with report" ,every time I run the report ,its asking for selecting Prompts.
My question is
when i run the report , It should not ask for prompts and I need to fetch the latest data from the database but not the saved data .
Plz get me out of this situation.
Thank u

Hi Dans,
Purpose of parameters:
The purpose of creating prompts in the report is to filter the data as per user's requirement.Whenever you refresh the report it is going to ask for the parameter values as the crystal engine will fire the required query on the database and include the parameter values in the 'where' clause of this query.In the absence of filters report fetches all the records in the databse which can significantly impact the performance of this report.
Minimum requirement for getting refreshed data:
In order to fetch the refreshed data (and not the saved one) the query needs to be complete before executing and thus the where clause condition needs to be complete as well.
To solve your issue:
In your case,if you want to avoid being prompted then you may hard code the desired filters in the record selection formula(Report>>Selection formuls>>Record) say as in Order_id not in (,,,,,,,) and order_date>'' etc
Limitations:
However after hard coding the values you may loose the flexibility of choosing the filter values at runtime.
If you have any further queries please keep this thread updated.
Thanks

Cannot get my Plants vs Zombies 2 game save data from my iPhone 5 to my iPhone 6 Plus or to my iPad Air.

Hello! I recently replaced an iPhone 4 with an iPhone 6 Plus. When I restored the 6 Plus from the 5 backup, it did not include my save data for Plants vs Zombies 2, and I cannot get the game to synch between the two phones. I also cannot get the PvZ 2 data to my iPad Air. All devices running the latest version of iOS (8.1). Thank you.

Hello Jim
just thought id let you know that i bought the iexplore software, downloaded it and solved my issues in less than 5 mins!
great tip, thanks for your help.
regards
Charles

Why do some people get "you cannot save data typed into this form" using FormsCentral fillable PDF?

Hello. We're using FormsCentral extensively. We create the fillable PDF and send it to about 80 people. Each of them is adding content and saving and then passing on to another person for further content. Ultimately, all parties are happy with the content and submit. The problem is that some of the people open the PDF and get the message ""you cannot save data typed into this form". What is causing this? Please help as it is causing us many problems.

Thanks for the quick response. We distribute the form to 80 people who fill it out and create 80 versions. They then pass the form to one other person who edits. All 80 forms, once complete, are submitted to FormsCentral.
I think the problem is with Mac users. Is there anything unusual about the Mac with Adobe Reader? If you provide your email address, I can send you one of the filled out forms that is having this issue. It's quite odd in that the fillable fields don't show up until clicked on and the form is not saveable.
Thanks!

Can I save data in a snapshot from signal express 2013 LE?

Can I save data (in txt or excel format) from a snapshot from signal express 2013 LE? My data buffer is too larege to export to excel. When I try to take a snapshot, I do not see any data. Are snapshots supported in the LE mode? This is the free version that comes with the USB 6009 ADC.

Yes, the snapshot function is available for SignalExpress 2013 LE. Does the snapshot function as intended when you try other projects?
Daniel P.

Not able to save data in pa30 action infotype in production

Hi,
In my organization users are not able to save data in SAP HR pa30 action info type in production.
It is gets hanged and throws run time error after run long time .
in ST22 it will give below error:
Runtime Errors   TSV_TNEW_PAGE_ALLOC_FAILED
Information on where terminated
    Termination occurred in the ABAP program "SAPLRHAS"   in "FILL_STRU_TURBO"
    The main program was "MP000000 ".
    In the source code you have the terminated point in line 759
    of the (Include) program "LRHASF00".
Thanks and regards,
Tarun

Hi,
     Pls check your relationship of reporting postions and set up relationship A002 and also check organization relationship
    otherwise take help form ABPERs and debug and partiuclar prorgram and where and witch object its throwing
    error found out.
Regrads,
Tarun

Unable to save data in record working time

Hi All,
I am working on ESS portal , when I try to record & save working time in portal , it throw an error message as 'Unable to save data'.
Can you plz assist me on this.
Usefull answers will be awarded.
Thanks,
Nilima

Hi ALL,
I'm too facing the same problem....usefull answers will be awarded.

Data Issue

Hi All ..
           We are facing one data issue DSO. One record is worngly loaded with some project iD ( Ex record is having ID GE1234 insted of having LE4423) remaining details are same . we are loading the data furtherly to master data table from the DSO. if i try for reporting for project id LE4423 ,information not avilable because it is heaving wrong ID,it is key also.But in the Source system (CFG) side Data is correct with ID LE4423.
         In update rule we are following one to one mapping for all infoobjects.My requirement is i need to have in my DSo LE4423 . I need to overwrite the record id GE1234 with LE4423 without affecting other fields in the record.
        Shall i load till PSA with the ID LE4423 ..then if load this single record to DSO will overwrite the GE1234 by choosing other field as key field. but we are following one to one mapping in update rule.
Please help me on this. i need to hev a correct id for record.
Thanks ,
Prem.

You can use selective deletion to delete the record with Project ID = GE1234
Load the data till PSA
Load the data to DSO using selection Project ID = LE4423 in DTP from PSA.
check in further data targets also for mismatch of data
Hope it helps,
Naveen Vytla
Edited by: Naveen Vytla on Nov 18, 2008 10:49 AM

Custom report -Mb51 -EBELN,AUFNR,KDAUF & KUNNR -Data issues

Hi,
This custom report is related to material document list (MB51).
I was trying to retrieve Purchase Order(EBELN),Order number(AUFNR),Sales order(KDAUF) & Ship-to-party( KUNNR) from MSEG & MKPF.
Unfortunately
It looks like for Sales Orders, it picks up the Customer Number but no Order Number. For STOs, it looks like it picks up the STO # but no Customer #.
How to over come this?
FYI..I also tried adding fields to standard report(MB51) and it is also doing the same manner .
Am I pulling it from Wrong tables? or is it related to DATA issues?
Regards
Praveen
Message was edited by:
PRAVEEN s

Hi,
This custom report is related to material document list (MB51).
I was trying to retrieve Purchase Order(EBELN),Order number(AUFNR),Sales order(KDAUF) & Ship-to-party( KUNNR) from MSEG & MKPF.
Unfortunately
It looks like for Sales Orders, it picks up the Customer Number but no Order Number. For STOs, it looks like it picks up the STO # but no Customer #.
How to over come this?
FYI..I also tried adding fields to standard report(MB51) and it is also doing the same manner .
Am I pulling it from Wrong tables? or is it related to DATA issues?
Regards
Praveen
Message was edited by:
PRAVEEN s

How to save data in ztable after editing in alv report

how to save data in ztable after editing in alv report?

Hi,
Please find the attachment below.This may be usefull to you.
[http://wiki.sdn.sap.com/wiki/display/Snippets/ALV-Editingandsavingtheeditedvaluesin+Database%28OOPS%29]
Regards,
Ramakrishna Yella.

Save data issue

Similar Messages

Maybe you are looking for