Save documents

How do you save an emailed document to the desktop on an ipad 2?

I emailed a Pages document to my iPad2. When I touched and held the received dcument on the iPad, the option "open in pages" came up, enabling me to save the document within the Pages app, which I had previously downloaded.

Similar Messages

I can't save documents in Pages.

I can't save documents in Pages. I get a "file does not exist" error message. I've tried changing the file name, length, and location. To no avail. This is only sporadic.

Hey fruhulda,
I have a similar problem although I'm running OSX 10.9.5. I'v just started to completely remove pages and attempt a reinstall. I did the search for the plist file. There was only one file with the com.apple.iwork.pages name but it did not have the .plist extension, even when I checked the info page. Is this the same file?
I'm not sure I want to update to Yosemite yet, but it looks like I may have to in order to continue to work with my pages documents, unless the reinstall works.

Pages, Numbers and Keynotes doesn't allow me to save documents

I created a new document in pages, numbers or keynote and, when trying to save it to my documents folder, it shows me "Couldn't auto-save document".
I've tried with different folders with the same results.
There's no problem when saving to iCloud.
I had installed iWork'09 and moved it to another folder.
Versions are: Pages 5.2.2, Numbers 3.2.2 with OSX 10.9.5 Mavericks in a iMac 27-inch late 2009

Are you running any anti-virus, anti-malware on your Mac? If so, disable this a/v software.
If not, I would suggest the following:
Boot into Recovery (hold command+R at the chime)
Run Disk Utility (verify/repair permissions, and verify drive) on your boot drive
Reboot normally
Boot into safe mode ( you can do this during the above reboot)
At boot chime, press and hold shift key until horizontal progress bar appears
At login prompt, press and hold shift key, after your password, but before clicking right arrow to log in.Press and hold shift key until your Desktop appears
Reboot normally
Re-evaluate if Pages auto-save failure dialog gone.

How do I save documents from iBooks on iPad to my iMac?

I am upgrading to iPad Air 2. Yeay! I am backing up everything on my old iPad (3rd generation), preparatory to erasing it to hand it on to a family member. There are documents I have saved into iBooks on my old iPad that are nowhere else, all categorised, and this represents a lot of work over several years. I have already lost a lot of these, when I updated the system recently. (Why is that?) I can easily save documents or other media to my iMac (27 inch, late 2013, Yosemite 10.10.2) from just about every other app, Apple and non-Apple, but not iBooks! What is that about? And how can I save the ones I still have? Do I have to email each one to myself? (The only solution I have thought of so far.)

You can manually add the files to your iTunes library...on Apple's support pages:
"To add PDFs to your iTunes library on your computer, drag and drop the PDF into your iTunes Book library. If you're using OS X Mavericks or later, drag and drop your PDFs into your iBooks library using iBooks for Mac."

How can I allow Contribute Users to save documents somewhere other than "docs"?

Our website was rebuilt by an outside company, who took my file structure and dumped it into the new site (I use Dreamweaver and our staff uses Contribute for their little niche of the web). We have a large site with multiple folders within the site. Those folders have several folders below them to sub-divide the tons of info we have to keep straight. However when I set up the parameters for the Contribute users, I only seemed to have one option to save documents (the "docs" folder).
I need for Contribute users to be able to save documents/files deeper in the file structure. How can I do that?
Thanks for any assistance! I hope this made sense.
Mark

The answer depends on how "good" your Contribute users actually are. By default, Contribute always places documents in the same folder as the page in a "documents" folder. I see two potential options: (1) the user(s) needs to go to the where the document needs to live and place the link at that level or (2) you can show your user the "Publish File From My Computer" (under file, in the third section) which would allow them to place the document in the correct location and then link to it from whatever page is appropriate. Personally, that would be a last choice.

ERROR SAVE DOCUMENT IN OFFICE 2013 REMOTE APPS

HI,
All my student receive error message when she's try to save document in this document
- Document redirectec YES!
- Roaming Profile YES!
Look this video explain the problems : VIDEO
If you have any solution your WELCCOME....
THANK YOU
SM

Hi,
Thank you for posting in Windows Server Forum.
From the provided video, it appears that user trying to save excel file on local system but the error dialog box says that there is no enough permission for user to perform that action.
Does this only apply when try to save document or same thing happens for other apps also?
Have you assign permission to user to save the local file?
Please check the whether you have not applied any permission to save the user file to users. Also please check the path where they are saving the document have access to that location.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

How do I save documents from my PC to icloud

How do I save documents from my PC to iCloud

You can't. iCloud doesn't support general file/document storage. Try a different cloud service like Dropbox.

HT202879 i am unable to save documents in keynote or pages. The file "untitled.key.tef" could not be opened keeps coming up.

i am unable to save documents in keynote 09 or pages. The file "untitled.key.tef" could not be opened keeps coming up. Can anyone tell me what is happening?

How did you originally make these documents?

Save document from word into sharepoint library does not work !

Hi,
I'm trying to resolve a problem that i have with word and my sharepoint website.
Some of my users have to open and RDP session on a windows 2008 server and work from there. They open their session with their credential and they do everything they do in local on sharepoint using IE.
BUT, we have always and ever had an issue on this server as they c'ant save a document (Word or Excel) from office. They have to upload it from sharepoint uising IE. In example, i want to save my document from word into the sharepoint document library I have
this error message :
"Windows doesn't find (http://intranet.sharepoint.com/DocumentLibrary/). Check and retry".
If I open my sharepoint site and i upload the document it works perfectly. Also if I open and edit an existing document from any library it will work with word. The problem seems to happen when i want to browse sharepoint from word for saving files...
As this server is a windows 2008, IE version is 9 and the office version is the same as on all computers (Office 2010 SP2 32Bit)
Any help would by appreciated
Regards

Hi,
I understand you encountered the issue when save document from Office client application to SharePoint 2010 site.
Is there any Proxy settings in networking side? Please bring up IE > Internet options > Connections > Lan settings. If so, please uncheck options in Proxy server and test the issue again.
If you have deploy GPO to add SharePoint site into Trusted sites, please check if there is any other GP associated with trusted sites that might affect the issue. You could also remove it from Trusted sites via IE options and test the issue again.
In addition, please provide more error message to help narrow down the issue, you could locate error information in Event log at least.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Xformbuilder error ... Could not save document Name/Name-Schema.xml

Hello everyone,
We're using 7.00 SP14 and I have a problem with the xml forms builder on one of our systems. We're having a 3 system landscape - all three are on the same patch level etc.
I was able to create a new xml form on one machine, unfortunately it doesn't work on our P-system. I tried to create a new form as well as copied an existing one - with the same error result.
While saving a project the following errors appear:
The following error occured when saving the schema: Could not save document Name/Name-Schema.xml. Reason: Operation is not supported
The project could not be saved on the server. Do you want to save a local copy?
Oct 13, 2008 2:45:43 PM - (ERROR)com.sapportals.wcm.app.xfbuilder.server.ServerManager :Could not serialize document: Operation not supported
Does anyone know what the problem is? I'd appreciate your help, thanks.
Sincerely,
Susanne
Okay I just found out that it's not possible to create a new folder in KM under xmlforms. That's working on the other 2 systems quite well. I have all the admin roles but somehow somewhere somewho must have restricted that. We found out that ice, etc, runtim, entry points and maybe even a few more aren't setup to create new folders in there. Does anyone know where/how to change that? It doesn't work with Details - permissions etc.
Edited by: Susanne Zahn on Oct 13, 2008 3:40 PM

For anyone who's interested in the solution.. there you go.
14.10.2008 - 17:53:00 CET - Antwort von SAP
Dear customer,
Can you please check whether the repository /etc is in read-only
mode?
Please navigate to -
System Administration -> System Configuration -> Knowledge Management
-> Content Management -> Repository Managers -> File System Repository
There you can see the checkbox for "read-only".
Please insure that this is not ticked. If it is, please uncheck it
and building/saving the project again.

Flash Cs6 incredibly sluggish save time, & unable to save document as

I am using Flash CS6, animating on ones with the brush tool. my timeline is 100 frames long, there arent keyframes on every frame, but there are a lot of them. my .fla file is 79mb.
there is only one thing in my library - a 15 second .wav audio file...
Saving the .fla file takes about 2 1/2 minutes!
after the 2 1/2 minutes I get flashed the "cannot save document as...   please try saving with a different name or on a different volume".
contrary to the error message the file does in fact save perfectly fine - in that volume with that name.
what is the deal with the save time being so outrageously long? the program is equally sluggish with copying and pasting keyframes - though thats less of an issue than the save time.
please help me, i can send you the flash file if your willing to look at it.
ps: I tried opening the file in cs5.5 - the save time was slightly faster, but not by much.

Sujai, here’s what I found:
1.       The student’s project is 58 mbytes in size. This is mostly because she used the flame deco tool to create a frame-by-frame animation of a rocket.
2.       At school students have networked folders. The network is 1 gbit, and the server is in the same building.
3.       It took 3 minutes and 40 seconds to save her project. At the end of the Save operation, we got the error message that it didn’t save properly (And, if we have auto-save on, this happens every 10 minutes). . However, the file was properly saved, and could be opened.
So, it appears that Flash has problems saving files of this size, at least in our network. This surprises me, because 50 mbytes is not that big.
I was able to get around this problem by having the student change her flame animation to a movie clip, and Tween the flames. It doesn’t have quite as cool a look as the frame-by-frame, but it’s more efficient (and only 6mbytes in size).
Thoughts? JR

Unable to save document as (Flash CS5 - BUG - OSX)

I have upgraded my CS4 to CS5 on MAC OSX and i'm having problems saving new and existing fla files. It doesnt always do it but it's very anoying when you have done some work and are unable to save it.
I get this message:
unable to save document as (file name)
please try saving to a different filename or location.
even if i try to save as to a different location i get the same message, this ONLY happens in flash CS5 and does not do it on any other application or even flash CS4. To put it bluntly i am absolutely furious with this and when you pay this amount of money should not get this hassle for such a simple action.
I have tried phoneing the adobe support line and it's a joke, you can't even understand the operator to even get anywhere and i just gave up having to repeat myself and asking them to repeat themselves.
I would be grateful if someone out there knows an answer to this or have a contact email for adobe support that i can email them direct. As a flash developer it's critical i can get on with my work without worrying if my work will even save.
Thanks in advance.
UPDATE: I can save files in CS5 as CS4 documents but not as CS5, this is so annoying.

I am having this same issue with Window 7 Professional 64 bit.
It seems I can reproduce it pretty reliably but have only seen it since I started working with trying to import and export runtime shared font libraries.
I create a new fla
I create a font asset in the library and set it to import and specify a relative path to the shared swf.
I save and test my swf and it works.
I go back into the font asset and change the location of the font swf to another relative path (this file is loaded into a shell so the raltive path will change).
After changing that import path I can no longer save the file even if I revert back to the previous value.
I have repeated this process a couple of times.

Unable to save document - Read Only or Open by another user error occurs when PDF is opened from Windows Explorer

Adobe Pro XI - using Windows 7 Pro OS
When a PDF document is opened from Windows Explorer, and pages are added, deleted, notations made, any type of changes, it cannot be saved until Windows Explorer is fully closed. If you try to save the document, you receive the following error - "The document could not be saved. The file may be read-only, or another user may have it opened. Please save the document with a different name or in a differnt folder. " I have confirmed the document is not read only, it is not open by another user, and it is not open multiple times. Once you fully close Windows Explorer, and try to save the document, it saves without a problem.
Are there settings in either Adobe Pro XI or Windows that will allow you to save documents without closing Windows Explorer first?
Thank you for any assistance you can provide. This error is a frustration since I open all my documents through Windows Explorer.

[discussion moved to Creating, Editing & Exporting PDFs forum]

Hi There how do i save documents from an e mail to my ipad?

Hi There How do i save documents/attachments from an e mail to my ipad?

Hi pvonk, nothing happens when i tap on the attachment link/document apart from the words appear select all or copy.

How do I save documents from the new Pages into a Word Document

How do I save documents from the new Pages into a Word Document?

Thank you so much - so simple! I had been using the 'share' option (worked in old Pages) and only had icloud or email as options. I have to attach word documents to emails to send to work. I don't want to use icloud because it's too public and I don't trust it. Also, you have to be able to access the internet and I need word documents on my USB stick for work where there's no internet.
I love my Mac but I do wish Apple would remember those of us living in less-than-perfect computer-land.
Thanks again
Lindsay

How do I save documents from iCloud into pages on my ipad?

HOw do I save documents from iCloud into pages using an ipad?

Where are you expecting to see "iCloud document?" Pages stores copies of your documents in iCloud but the documents appear in the Pages app. When you edit the document changes are automatically saved to iCloud. You do not go to iCloud to look for documents to open or copy.

Save documents

Similar Messages

Maybe you are looking for